Date attribute error

Similar Questions

• Write to the file of measurement with a loop For using the value of the dynamic data attributes

  I looked and looked, but couldn't find a solution for this.

  I currently have 15 points of different data that I try to write in an Excel file.  I have all combined in a table and lie with the function "write into a file position.  However, the column names are always "Untitled", "Untitled 1" etc.  I then used the function 'Set the Dynamic Data attributes'; but for this I have to do 15 different functions "set data dynamic attributes.  It was suggested to use a loop with the function 'Set the Dynamic Data attributes' inside of her, but I can't find how do.

  I have several arrays consisting of 15 different values for 'Signal Index' 'Name of Signal' and 'Unit', but also a unique 'get Date/Time In Seconds' related to 'Timestamp '.  The problem is that the error I get when I try to connect the output with Scripture at the entrance to measure file:

  The source type is dynamic data table 1 d.  The type of sink is Dynamic Data.

  How can I fix it?  I have attached a picture of my installation; Sorry if this is gross (I'm new on this!).  Thank you!

  It will get rid of the error, but it is not quite correct. What you need to do after that is to click on the output or the tunnel entry and select 'replace with the shift register. In addition, the array of values that you have wired to the Signal Index is wrong. Arrays are 0 based. Just wire the iteration Terminal here. And, finally, take the size of the table and this connection to the N terminal are stupid. Don't wire nothing to this.

• Satellite A300D-135 - BIOS - System Configuration data read error

  After starting a Satellite A300D-135 laptop computer, the following error message appears:

  
  3070M extended RAM passed
  512 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: TSSTcorp CDDVDW TS-L632H
  Fixed disk 0: TOSHIBA MK2546GSX
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  After pressing F1 the machine starts Windows, very well, but the error message is quite irritating, while it comes with a loud BEEP

  I tried the following things so far (in that particular order):
  -Load BIOS default
  -Flashed the BIOS with the latest version of the BIOS (2.80) for this type of model
  -Reinstalled windows with HARD drive format

  All the these did not work.

  I saw the same message appearing on several places on the internet (on different laptops with a Phoenix BIOS in common), but so far I have not been able to find a working solution.

  It might me a hardware problem, but all devices (vga, soiund, lan, wifi, usb, hdd) seem to work perfectly under Windows, so this does not seem the question). Another solution that is mentioned in some forums, replace the battery. But because the phone keeps time correctly I don't think it's the case either.

  Any ideas?

  Kind regards
  GJ

  Hello

  The POST (power on self-test) BIOS checks and detects errors on the motherboard.
  I think it has something to do with the hardware on the motherboard problem.
  I doubt that you can solve this if update of the BIOS and the BIOS default settings didn't change that.

  What to say; I think that the technician of the ASP should run tests to check what's wrong or what cause this I think it is question of s mobo.

• Satellte M30: BSOD - KERNEL DATA INPAGE ERROR atapi.sys

  Hello

  I really hope, really, that someone can help me. I'm no computer Wizard, so if you can help please give me simple instructions. My problem is that often my satellite M30 freezes and blue page happens to give me a warning.

  Top of the page is KERNEL-DATA-INPAGE-ERROR, then goes on to say disable Options memory BIOS such as cache or shading, atapi.sys says below.

  So can someone please help.

  Thank you

  Hello

  Because you are not a computer expert ;) I'll try to write as simply.
  It looks more like a hardware problem as a problem of software!

  But to be 100% sure, you should recover the laptop with the Toshiba Recovery CD supplied.
  This CD will be programmed the laptop back to the factory setting and usually the laptop should work properly after the recovery of the new!

  If you the BSOD will appear again the chances are high that memory, HARD drives and the motherboard is malfunctioning.

  But because you are a beginner, I would not recommend trying to solve this problem yourself.
  In this case, you must contact the ASP in your country!

  Good luck

• Equium A300D - 13 X - Configration system data read error

  Hello

  I have a problem with my Equium A300D - 13 X laptop, everytime I turn on my laptop it starts and loads the initial startup screen as usual, Toshiba once asked that loud "BEEP" comes from my laptop, and lists the following information:

  Phoenix TrustredCore (tm) NB
  Copyright 1985-2006 Phoenix Technologies Ltd.
  All rights reserved

  Herring of the ITA (DDR2 + T/RS690M/SB600)
  CPU speed = 2000 MHz

  639K system spent RAM
  1918M extended RAM passed
  1024 KB of L2 Cache
  Occult system BIOS
  Video BIOS with a shadow
  ATAPI CD-ROM: MAST * ADVD-RAM UJ-850 S
  Fixed disk 0: WDC W2500BEVT-00SCSTO
  Fixed disk 1: Hitachi HTS542520K9SA00
  Initialized the mouse
  ERROR
  System Configuration data read error

  Press to resume, installation

  I replaced the hard drive and flashed the BIOS settings as advised by Toshiba Helpline but the problem persists.

  Help, please! because the "BEEP" is now getting on my nerves!

  See you soon

  Hi andrew_net82,

  It seems that the BIOS has detected an error with a certain part of material...

  Before doing something I recommend you load the default settings in the BIOS. If you are in the BIOS Setup, press the F9 key.

  If it doesn t work you need for professional assistance from an authorized service I think. Guys need to check which part of the material is defective and must be replaced.
  List of the ASP, you can find on the official website of Toshiba.

• Data length error! Helps the release of Keyence micrometer

  I am connected to a micrometer of LS7600 Keyence, and I am able to send commands to the micrometer, as well as receive structred outputes.  For example:

  Command: M0, 1

  Return: ER, M0, 20

  Soul ER error, M0 is my exit command, and 20 means DATA LENGTH ERROR.

  I use a very basic VISA program that connects to the Keyence via my Serial Port.

  So when the micrometer Keyence attempts to send the data I requested, it apparently can't do because it encounters a data length error.  I know it's a problem with my labview software because I can output these values successfully using a Hyperterminal connection.

  The data SHOULD go back which looks like this: M0 + 25.2531

  It's just 12 bits?  Can anyone think why labview does not accept this string?

  Check the display format of the indicator, that you look at the number.  It by default 6 significant digits, is exactly what you say.

  The integer is in the orange wire, just your indicator is not set to show them all to you.

• Blue screen and CORE-DATA-INPAGE-ERROR Message

  The blue screen and the CORE-DATA-INPAGE-ERROR Message appeared during extract some files, 2 consecuentlly. It has happened too, but not that often and during other processes. What should I do? The OS is Vista Home Premium.

  Indeed, I am here!

  Thank you for fixing links.

  The attached file of the DMP is to bug checking KMODE_EXCEPTION_NOT_HANDLED (1e) .

  This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  8th error checking, {c0000005, 9eaa4efc, e551bae0, 0}

  0: kd > 9eaa4efc ln
  (9eaa4eb2) win32k! PFEOBJ::vFreepfdg + 0x4a |  (9eaa4f65) win32k! MultiUserGreTrackRemoveEngResource

  The exception is produced in win32k! PFEOBJ::vFreepfdg + 0x4a.

  0: kd > k
  ChildEBP RetAddr
  e551b6a0 84071908 nt! KeBugCheckEx + 0x1e
  e551ba70 8409584 has nt! KiDispatchException + 0x1a9
  e551bad8 840957fe nt! CommonDispatchException + 0x4a
  e551bafc 8401e70c nt! KiExceptionExit + 0 x 186
  e551bb64 9eb38a95 hal! KfLowerIrql + 0 x 64
  e551bb84 9eafac21 win32k! RFONTOBJ::vDeleteRFONT + 0 x 130
  e551bbbc 9eafada2 win32k! vRestartKillRFONTList + 0x7b
  e551bbf0 9eaafcd7 win32k! PFTOBJ::bUnloadWorkhorse + 0 x 115
  e551bc1c 9eaaf8d9 win32k! vCleanupPrivateFonts + 0x4d
  e551bc34 9eaac06e win32k! NtGdiCloseProcess + 0x16c
  e551bc54 9eaabbad win32k! GdiProcessCallout + 0 x 145
  e551bc70 84262 has 48 win32k! W32pProcessCallout + 0x5d
  e551bcdc 8423f47f nt! PspExitThread + 0x4a0
  e551bcf4 840fde8e nt! PsExitSpecialApc + 0 x 22
  e551bd4c 84094d 42 nt! KiDeliverApc + 0x1dc
  e551bd4c 77a95d14 nt! KiServiceExit + 0 x 56
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  04adf6dc 0x77a95d14 00000000

  Associated police crashes, likely a buffer overrun.

  ---------------------------------------------

  1. remove the font cache and then restart > C:\Windows\System32\FNTCACHE. DAT

  * I recommend that you create a system restore point before that just to be sure: Vista - START | type rstrui - create a restore point.

  2 you have avast! + Security installed Aladdin, is at the origin of the conflict.

  Remove and replace avast! and Aladdin with temporary Microsoft Security Essentials for troubleshooting purposes:

  avast! removal - http://www.avast.com/uninstall-utility

  MSE - http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall Smart Defrag as soon as possible.

  4 uninstall RealNetworks as soon as POSSIBLE, the drivers are too old - 2003.

  Kind regards

  Patrick

• Computer laptop Gateway does not load windows Vista, reads configuration data read error: System.

  OK a friend knows me to fix his laptop. Apparently what she was experiencing major problems, so he erased the disc and tried to reinstall Win Vista from disk. Will not work. I can get to where you can choose a partition to install the operating system to, and it says: Windows cannot find a system volume that meets its criteria for installation. My friend says he has just tried, form disassemble the computer an audit of all the parties to try ALL the different options during installation, as well as the options for the BIOS. Any ideas people? Here are the approximate specifications, because the owner has not been able to get the computer working for awhile:
  4 GHz, 4 GB RAM computer Gateway laptop, 2006, Phoenix TrustedCore, and a string of other interesting info that appears on the first screen of the error:

  9D.03 BIOS version

  632K RAM passed system
  3966M extended RAM passed
  1024 KB of L2 Cache
  System BIOS with a shadow
  Video BIOS with a shadow
  ATAPI CD-ROM: Optiarc DVD RW AD-7563 has
  Fixed disk 0: WDC WD2500BEVS-26VATO
  Initialized the mouse
  Updated System Configuration data
  ERROR
  System Configuration data read error.

  I'm not very tech savy and I'm not the owner of the PC, so I don't know all about it so go easy on me :).

  If your friend tried to reinstall Windows by using the defined gateway recovery disc (and this is the best way) and this recovery fails, the laptop has hardware problems. Disassemble laptops is a fickle business at best and while it sounds like the hardware problems started before your friend did this, it may have put the nails in the coffin of the laptop to take apart.

  At this point, you can try troubleshooting hardware or your friend can take the laptop to a competent professional (not a type of BigComputerStore/GeekSquad of the place). However, if the laptop has had hard use, your friend must remember that a cell of 4 years with major hardware problems probably won't be cost effective to repair.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot MS - MVP - Elephant Boy computers - don't panic!

• Kernel data Inpage Error... Memory dump... Please help me

  Hi my name is shoaib.

  I am facing a problem of blue screen approximately every 20-40 minutes. I run the memory test and you indicates no error. I check the RAM via the command "mdsched.exe" and she also don't say no found error. But when the blue screen appears it is said on the top of the page "kernel data Inpage Error".

  Please tell me what to do?

  Here is my file link "msinfo32".

  http://1drv.Ms/1Lu9SpH

  I have not found any "directory Minidump" in C:/windows. Please suggest me what to do. I really need your help. Thank you

  If you stopped crashing run a trace of windows performance when you encounter the problem

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem

• 0X0000007A (KERNEL DATA INPAGE ERROR)

  Hello, I got a screen blue error during the game or just overall being on my pc, but it seems to happen more when I have the game. The code is '0x0000007a (KERNEL DATA INPAGE ERROR)' I did 3 bugs so far.

  1. CHKDSK C: /F /R (http://goo.gl/cQCQj2)

  2 memory diagnostic tool (https://neosmart.net/wiki/0x0000007a-kernel-data-inpage-error/)

  3. fix (when I tried fix it says update applicable to your computer)

  

  These accidents are called BCC116 and are associated with your video subsystem.  Please follow the instructions of this wiki

  

• Dat2.data version error

  I get the dat2.data Version error when I try to print, or even to open Microsoft Word 2007.  It started when I loaded the new epson drivers on my computer.  I tried to uninstall the epson SW but it won't let me, it times out.

  Hi Tom Callaghan,.

  Welcome to the Microsoft Answers community.

  Do you have which version of the driver installed?

  You can install the old driver version and check.

  I suggest to start your computer in clean boot mode, and then uninstall the printer driver and restart your computer. Reinstall the printer drivers.
   
  Method 1: Steps to uninstall and reinstall the printer driver.
  1. click on the Start button and select Control Panel.
  2. click on programs.
  3. click on programs and features.
  4. now uninstall the printer drivers.
  5 restart your computer. This will automatically install the appropriate drivers for it.

  You can also download the driver for it from the manufacturer's Web site.
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?OID=-10222&infoType=overview
   
  Method 2: Steps to start in clean boot mode:

  1. click on start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.

  http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.
  If the methods above does not solve your problem, and then run system restore.

  Method 3: System Restore will take your computer state permeable when it did not face such a problem, this can be done by selecting the correct restore point.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next.
  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. click on finish.

  For more information, visit the links below:
  http://support.Microsoft.com/kb/936212/
  http://support.Microsoft.com/kb/826862

  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• CanoScan 4200F gives error - "Twain data transfer error".

  I have a new Windows 7 PC and unable to use CanoScan 4200F, he returns with "Twain data transfer error".  Worked fine with Windows XP.  What should I do

  to make it work?

  Check the manufacturers technical support for latest drivers site, they have Windows 7 drivers that you can download and install. Download little correct level for your computer - 32 or 64 bit - and then install them.

  CanoScan 4200F drivers:
  http://www.USA.Canon.com/Cusa/support/consumer/scanners/canoscan_series/canoscan_4200f?selectedName=DriversAndSoftware

  To see if you have Windows 7 32-bit or 64-bit:

  1. Open system by clicking the Start button, right-click computer, and then clicking Properties.
  2. Under system, you can view the type of system, it will say 32 or 64 bits.

  How to install a Scanner:
  http://Windows.Microsoft.com/en-us/Windows7/install-a-scanner

  Working with the scanner and Camera Installation Wizard:
  http://Windows.Microsoft.com/en-us/Windows7/working-with-the-scanner-and-Camera-Installation-Wizard

• data paging error Kernal

  I have dell 1545 laptop inspiton. for last 4 months if I want to install wibdows 7 ther may be an error with kernal data inpage error blue screen. I have run CHKDSK/p & CHKDSK C: /F /Rcommand but after the problem is continuous. Please tell me my hard drive is bd or I have to buy new hard drive?

  Hello

  Take a look at the answer in the following link:
  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/7b354864-297e-428A-9026-bfd822137ef1

  Thank you

• Kernel data inpage error foolowed by 0xc0000185

  If this started a few weeks ago about every day or if I get this error called kernel data inpage error http.sys

  I decoded to ignore it because it would just restart it self but since yesterday it happens whenever I start my laptop if his sleep or stop and when it restarts it says my laptop needs to be repaired error code: 0xc0000185 what should I do? I tried check disk but he asked me to make a volume of check on the next reboot and im a little scared to restart im using sfc/scannow and I also checked all my hard drives for errors in the Properties section there were no errors.

  any ideas? IM using a lenovo G510

  2: kd > .bugcheck
  0000007 a Bugcheck code
  Arguments fffff6fb '400c9ce8 ffffffff' c000000e 00000000' 42e19880 fffff680'1939 d 000

  2nd arg NTSTATUS 0xc000000e says a device randomly lost its existence and attempted to be referenced (usually the hard drive).

  2: kd > knL
  # Child - SP RetAddr call Site
  00 ffffd000 ' 22378478 fffff801' 00d869db nt! KeBugCheckEx
  01 ffffd000 ' 22378480 fffff801' 00c739e0 nt! : FNODOBFM: 'string' + 0x1881b
  02 ffffd000 ' 22378570 fffff801' 00c6068a nt! MiIssueHardFault + 0 x 184
  03 ffffd000 ' 22378630 fffff801' 00c55e31 nt! MmAccessFault + 0x5ba
  04 ffffd000 '223787f0 fffff801' 01208f65 nt! MiCommitExistingVad + 0 x 901
  05 ffffd000 ' 22378920 fffff801' 00d694b3 nt! NtAllocateVirtualMemory + 0xfbd
  06 ffffd000'22378 b 20 fffff801'00 d 61900 nt! KiSystemServiceCopyEnd + 0x13
  "ffffd000 07 ' 22378 d 28 fffff801 ' 010983bd nt! KiServiceLinkage
  ' ffffd000 08 ' 22378 30 fffff801 d ' 0102903d nt! RtlCreateUserStack + 0x19d
  09 ffffd000 '22378e20 fffff801' 0101f685 nt! PspAllocateThread + 0 x 385
  0a ffffd000 ' 22379080 fffff801' 0101f327 nt! 0x1f1 + PspCreateThread
  0 b ffffd000 ' 22379340 fffff801' 00d694b3 nt! NtCreateThreadEx + 0x21f
  0 c ffffd000 '22379a 90 00007ffe' c1691cda nt! KiSystemServiceCopyEnd + 0x13
  0d 00000032' 00000000 00000000 '0x00007ffe' c1691cda of 739aee08

  Looking at the stack, we have created a thread that was used to allocate virtual memory and we went off the rails on chassis #04, committing existing an existing virtual address.

  In fact, I think that this may be a side effect of an AVG bug, rather than a bad hard drive. I would recommend remove AVG first and see what happens.

  -AVG removal http://www.Avg.com/us-en/utilities

  Windows Defender (how to activate after removal)

  A.Navigate ofControl Panel (with icons). You can do this by typingStart > Search > Panel. Once in the Control Panel change the drop-down menu of thecategory to large or small icons.

  B.Among list icons, and then click Action Center.

  C.Assuming that the deletion of your previous anti-virus software has gone well, you will notice for unexpected and spyware software (important) protection and Virus protection (important), it will have a button that says turn on now. Click on this button (no matter that, as Windows Defender is as well used in Windows 8/8.1).

• kernel data inpage error spaceport sys

  Hey

  I just got a new pc, and whenever I stopped and it starts up again, I get an error: kernel data inpage error spaceport sys

  and the computer just start windows normally.

  What to do / how to fix it?

  Good morning Martine.

  For more information, see the error below:

  -+------------------------------------------------------------------------------------------------------------------

  7 has error checking, {fffff6fc40009b08, ffffffffc0000185, 1 c 2042860, fffff880013617ec}

  GetPointerFromAddress: unable to read from fffff80151b76170
  WARNING: Unable to verify timestamp for win32k.sys
  ERROR: Module load completed but symbols can be loaded for win32k.sys
  Probably caused by: memory_corruption

  Follow-up: memory_corruption
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  KERNEL_DATA_INPAGE_ERROR (7A)
  The requested page of kernel data could not be read in.  Usually caused by
  a bad block in the disk controller or paging file error. See also
  KERNEL_STACK_INPAGE_ERROR.
  If the error status 0xC000000E, 0xC000009C, 0xC000009D or 0xC0000185,
  This means that the disk subsystem has suffered a failure.
  If the status of the error is 0xC000009A, it means the query failed because
  a file system has failed to move forward.
  Arguments:
  Arg1: fffff6fc40009b08, type of lock which took place (1,2,3 or PTE address value)
  Arg2: ffffffffc0000185, error state (state code of e/s normally)
  Arg3: 00000001c 2042860, the current process (virtual address for the lock type 3 or PTE)
  Arg4: fffff880013617ec, virtual address that could not be paged in (or PTE contents if arg1 is a PTE address)

  Debugging information:
  ------------------

  Error_code: (NTSTATUS) 0xc0000185 - peripheral of e/s reported an IO error.

  -+------------------------------------------------------------------------------------------------------------------

  It seems that you have a bad hard drive or RAM module in your new system (ran 6 hollow landfill WinDBG), since it is a new system, I would bring her to the store you bought and let replace it.

  Read this guide on how to test your RAM Modules: http://www.pcadvisor.co.uk/how-to/pc-upgrades/3432631/how-check-for-bad-ram-modules-in-your-pc/

  Read this guide on how to test your hard drive: http://pcsupport.about.com/od/toolsofthetrade/tp/tophddiag.htm

  Personally, I'd suggest to return the computer to the store and allow them to correct the problem, apparently not driver related to me (especially if you updated all..), it seems that you have a malfunction of the equipment.

  You can try and run CHKDISK (http://windows8themes.org/how-to-run-chkdsk-in-windows-8.html), but I suggest you RMA your system and let check the RAM and hard drive.

  If however, you want to ensure that it is not Windows, then reinstall Windows and see if the problems come back, but I bet they will be.

  I know this answer might not be what you want... but...

  Yuri