Date/time is not set

Similar Questions

• EL Capitan automatic date time does not work

  People

  I use an El Capitan 10.11.5 MacBook Air version.

  I noticed that the data and time does not work even though it was set to auto to time.asia.apple.com.

  I ran these commands on a terminal

  $ping-c 5 time.asia.apple.com

  Ping: impossible to solve the time.asia.apple.com: Unknown host

  $ping-c 5 time.nist.gov

  PING ntp1.glb.nist.gov (64.113.32.5): 56 bytes

  64 bytes from 64.113.32.5: icmp_seq = 0 ttl = time 44 = 386,629 ms

  64 bytes from 64.113.32.5: icmp_seq = 1 ttl = time 44 = 307,532 ms

  tell me ping works but not for the server ntp - time.asia.apple.com

  $nslookup time.asia.apple.com

  Server: 192.168.1.254 address: 192.168.1.254 #53

  Non-authoritative answer: time.asia.apple.com canonical name = time - ios.g.aaplimg.com.

  time - ios.g.aaplimg.com canonical name = site time.apple.com.

  Site Time.Apple.com canonical name = time - osx.g.aaplimg.com

  $cat /etc/ntp.conf

  Server time.asia.apple.com.

  $ ntpq Pei

  No returned ID association

  Please, back up all data.

  Open the window of network preferences, if necessary, by clicking on the padlock icon in the lower left corner and entering your password. Cllck advanced, open the DNS tab and change the addresses of the servers as follows:

  8.8.8.8

  8.8.4.4

  It's Google DNS. Click OK, and then apply.

  In Safari, select

  ▹ Safari preferences... ▹ Confidentiality ▹ Remove All site data

  and confirm. If you use another browser, clear the cache memory. Test. Any difference?

  Notes:

  1. If you lose Internet access after the above change is made to your network settings, remove the Google servers in the network preferences pane, then click on the TCP/IP tab, then click on renew the DHCP lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click on apply so that the changes take effect.

  2. I do not use Google DNS myself, but I tested it, and I do not recommend it or any other provider DNS; the addresses of the servers are only available for testing purposes. There may be privacy and technical issues involved in the use of this service, that you should personally study before deciding whether to retain the settings. Other public DNS services exist.

• Date/time format not work server

  Hello
  
  
  I guess there is a lot of excitement with the recent release of Adobe Dreamweaver CS3 and I like many others have chosen this way to upgrade
  
  
  My problem - I don't seem to be able to use dynamic data successfully selectable formatting in CS3 (not fully) some of the formats as currency and number work very well formatted...
  
  
  Function DoDateTime (str, nNamedFormat, nLCID) function code is not transferred on the web page, with that I work or is the dynamic element encapsulated when I select a Date/time format.
  
  
  After having spent the last 6 months, build a planning (ASP VBScript Application) I came across many issues locale date, date of shaped and calculations etc. but for the life of me, I can't give a sense questions that I now have.
  
  I realized this problem on my two desktop Vista and XP - new own websites (for testing)
  I might add CS2 not presented no problems in this area - which indicates the problem persists with cs3 (Bug?)
  
  I would be very grateful for any input or advice help...

  Well Yes...

  ASPvb script

  Thanks for the control of Mr Adobe - it seems that someone in the development of the production misnamed the file source DateTime in the Formats.xml file.

  The formats.xml file is a reference to the source file as DateTime Date/time NOT

  Remove the slash in the file reference name and everything works fine...

  See the path of file-
  C:\Program Files\Adobe\Adobe Dreamweaver CS3\configuration\ServerFormats\ASP_Vbs\Formats.xml

  Now to return to developing countries... What Date/time/Frustration!

• timestamp get only date, time is not included in the selection...

  Hi all
  
  I have a question like that, here (defect_status) is a table with two columns of timestamp (start_date and end_date) including the date and time.
  
  I selection of data in the table and return data as refcursor. When I'm extraction of cursor and printing data for the test, I get only part of date, part of an hour is not included when printing the data.
  
  ex:
  
  Ref_cursor OPEN TO select start_date, end_date defect_status;
  
  Here start_date, end_date are the timestamps. but, I get only the date. part of the time not included.
  Note: the statement select is written in dynamic sql.
  
  can someone help me please. How can I get date with time.

  Hello

  What of it?

  Ref_cursor OPEN FOR select to_char (start_date,' dd/mm/yyyy hh), to_char (end_date,' dd/mm/yyyy hh) of defect_status;

  Published by: Divya on October 12, 2010 12:25 AM

• Flex Date time axis not showing the correct values

  <? XML version = "1.0" encoding = "utf-8"? >

  " < = xmlns:fx s:Application ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/halo" width = "700" height = "500" >

  < fx:Declarations >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < fx:Script >

  <! [CDATA]

  import mx.collections.ArrayCollection;

  [Bindable]

  public var stockDataAC:ArrayCollection = new ArrayCollection ([] collection

  {date: "2005, 7, 27 ', nearby: 41,71},.

  {date: "2005, 7: 28", narrow: 42.21},.

  {date: "2005, 3: 29", narrow: 42.11},.

  {date: "2005, 1, 1 ', nearby: 42.71},.

  {date: "2005, 10, 2", nearby: 42.99},.

  ([ {date: "2005, 9, 3 ', nearby: 44}]);

  public void myParseFunction(s:String):Date {}

  / / Get an array of strings to the last comma-separated string.

  var a: Array = s.split(",");

  / / Create the new Date object. Subtract one from the month property.

  / / The month property is zero-based in Date constructor.

  var newDate:Date = new Date(a[0],a[1]-1,a[2]);

  return Nouvelle_date;

  }

  ]]>

  < / fx:Script >

  < mx:Panel title = "Example DateTimeAxis" height = "100%" width = "100%" >

  < mx:LineChart id = "mychart" height = "100%" width = "100%".

  paddingRight = paddingLeft = "5" '5 '.

  showDataTips = "true" dataProvider = "{stockDataAC}" >

  < mx:horizontalAxis >

  < mx:DateTimeAxis dataUnits = 'days' parseFunction = "myParseFunction" / >

  < / mx:horizontalAxis >

  < mx:verticalAxis >

  < mx:LinearAxis baseAtZero = "false" / >

  < / mx:verticalAxis >

  < mx:series >

  < yField = mx:LineSeries 'close' xField = "date" displayName = "AAPL" / >

  < / mx:series >

  < / mx:LineChart >

  < / mx:Panel >

  < / s:Application >

  the code above shows opposite values from date to date axis it is to say it should show 01/05 2 / 05 / 3 / 05 4/05 but its display 10/05 09/05 08/05 07/05 on the date axis.

  Help, please.

  I saw this bug on Adobe's JIRA so nothing much you can do for now DateTimeAxis is quite bugged.

  In passing, is it me or mx:datavisu is on the low priority these days? Maybe the team working on a version of spark?

  https://bugs.Adobe.com/jira/browse/FLEXDMV-2231

• Automatically set to the Date and time does not

  Date and time settings on my iPad Air set them automatically does not work? When I turn it out it will allow me to choose a city (Knoxville).

  When I turn it on with (location settings) it just turns and turns?

  Any ideas?

  Hello and welcome to Apple Support communities,

  This problem may be caused by a number of things, most often the cause is the device not being able to contact the time server. Here are the instructions from Apple supported for this problem, as well as a link to the appropriate article.

  Follow these steps, after each step:

  1. Make sure you have the latest version of iOS.
  2. Automatically turn on set in settings > general > Date & time. This will automatically put your date and time based on your time zone.
  3. Make sure that your time zone is set correctly. Tap Settings > general > Date & time > time zone.

  If you still have any questions affecting your date, time, or time zone, you can automatically disable in the settings > general > Date & time and manually set the time and time zone. Or contact your carrier.

  The option to enable the value automatically may not be available in all countries or all shells.

  If the time on your iOS device does not go after a sync with your computer, the computer may be time wrong. Check the time on your computer in system preferences > Date & time. You can select "Set date and time automatically."

  Support the Article HT203483

  Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support

  Of course, if the time of your carrier server cannot connect the other option is to manually set the date and time until the carrier server are again available.

  Hope you helps out.

  Kind regards

  Peter.

• question: format / 'language' of the current Date (in the date/time field), javascript only

  Hello

  I have 2 date fields in my form, which should display the date in a different format. (yyyy.mm.dd / dd-mm-yyyy)

  To get the current date I only use java script

  Formular1.p1.date_YYYYmmDD::initialize - (JavaScript, client)
  
       var date = new Date();
      this.rawValue  =  date.toLocaleDateString();
  
  

  My first problem is (red): I get the date in English, but I want it in another language. As it was defined in the form settings

  

  My second question is: How can I format a date/time-sized (not a text field) in javascript with a model specific to the init event?

  It seems that my code in the init event replaces the model of the DateTime field configuration

  Here is my form, if anyone wants to check it out:

  https://Acrobat.com/#d=zeOMyj9MhBdYbVWk8S1pHw

  Hello

  I think that these two problems are the same, by setting a date/time field using the rawValue always format must be yyyy-mm-dd, if you use a different format, the value is just seen as text and poster without shaped.

  var date = new Date();

  this.rawValue = util.printd("yyyy-mm-dd", date);

   

  You can also set the formattedValue if you have a date in the correct format.

  var date = new Date();

  var currentLocale = xfa.resolveNode("#localeSet.#locale").name;

  var dateFormat = "date("+currentLocale+"){DD MMM, YYYY}"

  this.formattedValue = util.printd(dateFormat, date, true)

  This code assumes that the view model is date {MMM DD, YYYY}

  The date format specification is in the XFA http://partners.adobe.com/public/developer/xml/index_arch.html specification

  Concerning

  Bruce

• Satellite L50-B-date/time in the BIOS resets without battery

  Hello friends :-)

  I just bought new laptop Toshiba Satellite L-50-B (Skullcandy). After a few days, I read on the internet if I want to save my battery I have to just take off and works on current alternative. I did it. My battery is fixed by two screws. When my battery is removed, I noticed a problem, my time of BIOS is reset whenever I turn off the laptop. When I put the battery, time is not set to zero.
  I have difficult, maybe it was a CMOS battery? What do you think? I open it and I couldn't find the CMOS battery?

  Another question, why the battery is fixed by two screws? I wondered, maybe she is not intended to be deattached?

  Hello
  did you get anywhere with this? I have the same problem.

• How the stamp date & time email with a photo

  I send a photo to prove I did not damage a rental car, but the stamp date & time are not displayed. How can I add them to the email please

  The recipient can also access the properties of the files you sent to them as well to confirm your screenshots.

  See you soon.

• 'RT Set date and time' does not define the UTC seconds

  Hallo,

  I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the vi "the Date and time value. But the second I get home are ADDED to the current time and not defined as the new value.

  Even the vi illustrates this behavior: I've set up a vi time where in a loop (100ms delay) and reread. When I put in local time stop the clock (as expected), but when I put the UTC time the Dungeon seconds on the run...

  Can someone help me with this problem?

  Thank you

  Florian

  Hi Florian.

  After posting your version of LabVIEW, I found an answer to your question:

  The behavior you're seeing is a known bug that has been fixed in LabVIEW 8.5.1. Workaround is to use set local time instead.

  Let me know if you have any other questions.

• given the date and time not set when computer starts. also have a problem with typing

  by turning on my computer, sometimes it lights up at all, and then I try several times so that it lights up. When switching on the main screen, it says error due to the date and time not set and puts my computer starts in safe mode. When I am that I then have to set the date and time again. Why this keep happening?

  on my second question that I have is when I type an email or anything, my writing will just jump on another line and start typing in the middle of other sentences. Why is it jump around like that?

  You may have a failed in your motherboard CMOS battery.

  It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

  They cost about $5 to replace.

  http://www.computerhope.com/issues/ch000239.htm

  How to replace the CMOS battery in the above link info.

  See you soon.

  Mick Murphy - Microsoft partner

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)

• I have not set the date on the camera, how do I change the date on the picture

  I have not set the date on the camera, how do I change the date on the picture

  Thank you

  Maybe some help here: http://windows.microsoft.com/en-US/windows-vista/Change-the-date-and-time-a-picture-was-taken

• CMOS Date/time not Set__CMOS Settings Wrong

  Hello

  I use Windows XP and Vista.

  When I turn on my computer, it displays the error message:

  CMOS Date/time not set

  Fault of CMOS settings

  How could I solve this problem without changing the motherboard?

  Replace the CMOS battery. It's cheap (~ $5.00) and easy. After replacing the battery, you will need to go into the BIOS to set the date and time.

  How to replace the CMOS in your PC battery -http://www.liverepair.com/encyclopedia/articles/cmosreplace.asp
  How to replace the CMOS battery - http://www.computerhope.com/issues/ch000239.htm

  MS - MVP - Elephant Boy computers - don't panic!

• Can not get the title and date/time to appear on the photo to develop, or a library

  I must have done it when I was trying to do some other keyboard shortcut and got hurt - and now I can not understand how to get rid of. But a few weeks ago I did something and now the file name, date/time and size image appear in white text on the top left of any photo I have in develop it or library screens:

  

  So you can see "_MG_0955.CR2" and other details in the clouds. Does anyone know how to get rid of it? I can't find anything in one of the menus. I'm on Lightroom 4.3 for Mac OSX Mountain Lion.

  Thank you!

  Ltter that I you keyboard through the Loupe View Info (even in the develop Module).

  You set what you want to see by pressing cmd + J - and select the parameters for Info 1 and Info2.

  Letter I cycles this way: 1 - Info 2 - no overlay Info.