DBMS_METADATA. GET_DDL does not return the entire procedure. His truncated

Similar Questions

• HP Photosmart Series 4500: HP Photosmart 4500 printer does not print the entire document

  Printer does not print the entire document.

  @trish45,

  If you are able to print from other programs without any problems. Then we can reduce it down to the site you are using.

  Are you able to download and save the document or statement on your computer and then try and print it?

  I suggest to check on the website of the Bank and see if they have a troubleshooting section that might offer assistance.

  Thanks again,

• part of the screen lack sound as if all type of himself downplayed a little and does not use the entire screen

  I have a dell studio with vista, I shot it today and the far right 1/4 of my screen has disappeared, its like everything kind of himself downplayed a little and does not use the entire screen. I didn't change anything or add programs. someone has an idea?

  Hi musicwatkins

  
  Did you the latest changes on the computer?

  You can check if changing the resolution of the screen helps you solve the problem. See below for links-

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

   

  You can also check if the setting parameters of monitor, referring to the manual of the monitor will help you.

   

  I hope this helps.

• Printer does not print the entire page.

  original title: printer does not print the entire page.  Sometimes it will display only the left 2/3 of the page. It is running Vista and the printer is a HP Photosmart Premium.

  Problem HP printer.

  Ask in a forum HP or HP support.

• PC Windows 7 does not return the document or the printed page

  I had a setting for this in XP control but can't find the page, that I got it.

  This occurs in AN application, or a browser.  I print from a workbook Excel specific, for example, when I have a number of them opens.  The system does not return the workbook that I printed.  It's maddening and causes all sorts of questions.  Searching the Web for this instant product nothing and I know I can't be the only person who saw this.

  It is a platform of Windows 7 in a commercial network environment.  I use the snap Menu Addintools classic because I can't stand the Ribbon and never loved.  In Windows 7, I run a couple of other supplements that restore the XP the taskbar properly use, so you can work efficiently.

  None of the supplements are causing this problem because I was running the same classic Menu Add-in in the XP box and he had the same problem until I found workaround that I don't remember now.

  Everyone knows about this problem?

  Jeff Lynch

  Hello Jeff,.

  Please contact the Microsoft community.

  As the Windows 7 computer is under the corporate network environment, the issue that you are facing is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forum.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  Hope the information above has been a useful answer, Mercia back to us if you respect them more.

• Plan does not show the local procedures/functions

  Hello

  SQLD 4.1

  I use the preview to a plsql procedure feature. The procedure provides a local procedure.

  In the window structure the local procedure does not at all. Declared variables and cursors in the local procedure are displayed, but as if they where in the main proceedings.

  Local procedures and functions should be displayed in the window structure. It would be nice if the declares the variables and cursors of a local proceeding would be arranged in suchs a means, it is visible that they belong to this local procedure, perhaps using an indentation.

  Best regards

  Joop

  Hey, Joop!

  A mysterious person, known only as "SF" for the purpose of this response, has also reported this to me. We have filed a bug on this subject, and it shows as 'fixed' in 4.1.1.

  

• Rectangle does not select the entire image

  I used Photoshop 9 for quite awhile, but the rectangular mark does not work properly.  I don't stretch and select the entire image.  I reloaded the software without modification.  What I don't want to change that?

  Hello, look in your toolbar Option: you have fixed ratio and fixed size, selected in the Style: fall down. Select normal for a marquee 'free. '

  

  Also, make sure that you don't have a pen (if should be + 0 px like in my picture).

  You can also right-click on the marquee in the options even bar and select "reset tool", if the steps above do not work.

  I hope this helps!

• Oracle query of relay and access function call does not return the list

  Thanks to aid in a previous post, I received, I created an oracle 10 g feature that returns the list after you run the sql code it contains. It works in oracle, using sql developer.
  
  I need to have the list that he returned to see the place in MS Access via a relay request. It does not work so far. The string for connection etc is ok, I'm able to use passthrough queries to run sql strings correctly. But when I try to call the function through the request of relay and access initially nothing seems to happen (IE no list) and if I try to run again, there is an "ongoing call odbc error. Current operation cancelled "." There are only three records in the table. I'm missing something, someone can he spot?
  
  The application of relay and looks like this
  
  Select * from fn_testvalues of the double
  
  Once that is running in oracle.
  
  To create the test table and 2 functions below.
  
  CREATE TABLE t_values (MyValue varchar2 (10));
  
  Table created
  INSERT INTO t_values)
  SELECT 'Merced' c1 FROM dual UNION ALL
  SELECT "Pixie" dual UNION ALL
  SELECT "452" DOUBLE);
  
  3 lines inserted
  FUNCTION to CREATE or REPLACE RETURN NUMBER IS fn_isnum(p_val VARCHAR2)
  n_val NUMBER;
  BEGIN
  n_val: = to_number (p_val);
  RETURN 1;
  EXCEPTION
  WHILE OTHERS THEN
  RETURN 0;
  END;
  /
  
  Feature created
  
  table test:
  SELECT val, isnum fn_isnum (MyValue)
  OF t_values;
  
  VAL ISNUM
  ---------- ----------
  Merced 0
  Pixie 0
  1 452
  
  Now the function that is called in the application of relay:
  
  create or replace function fn_testvalues
  sys_refcursor is back
  RC sys_refcursor;
  Start
  Open rc for
  Select t_values.*, fn_isnum (MyValue) t_values IsNum;
  Return (RC);
  
  end fn_testvalues;

  Why not?

  satyaki>
  satyaki>select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE    10.2.0.1.0      Production
  TNS for Linux: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production
  
  Elapsed: 00:00:00.00
  satyaki>
  satyaki>
  satyaki>create or replace view bb
    2  as
    3    select *
    4    from emp;
  
  View created.
  
  Elapsed: 00:00:00.00
  satyaki>
  satyaki>
  satyaki>select * from bb;
  
       EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO JOB1      DOB
  ---------- ---------- --------- ---------- --------- ---------- ---------- ---------- --------- ----
        7521 WARD       SALESMAN        7698 22-FEB-81     226.88        500         30 SALESMAN
        7654 MARTIN     SALESMAN        7698 28-SEP-81       1815       1400         30 SALESMAN
        7788 SCOTT      ANALYST         7566 19-APR-87     598.95                    20 ANALYST
        7839 KING       PRESIDENT            17-NOV-81       7260                    10 PRESIDENT
        7844 TURNER     SALESMAN        7698 08-SEP-81       2178          0         30 SALESMAN
        7876 ADAMS      CLERK           7788 23-MAY-87     159.72                    20 CLERK
        7900 JAMES      CLERK           7698 03-DEC-81     1379.4                    30 CLERK
        7902 FORD       ANALYST         7566 03-DEC-81    5270.76                    20 ANALYST
        7934 MILLER     CLERK           7782 23-JAN-82     1887.6                    10 CLERK
        7566 Smith      Manager         7839 23-JAN-82       1848          0         10 Manager   23-JAN-89
        7698 Glen       Manager         7839 23-JAN-82       1848          0         10 Manager   23-JAN-89
  
       EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO JOB1      DOB
  ---------- ---------- --------- ---------- --------- ---------- ---------- ---------- --------- ----
           1 boock
  
  12 rows selected.
  
  Elapsed: 00:00:00.00
  satyaki>
  satyaki>
  satyaki>select *
    2  from bb
    3  where empno = &eno;
  Enter value for eno: 7521
  old   3: where empno = &eno
  new   3: where empno = 7521
  
       EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO JOB1      DOB
  ---------- ---------- --------- ---------- --------- ---------- ---------- ---------- --------- ----
        7521 WARD       SALESMAN        7698 22-FEB-81     226.88        500         30 SALESMAN
  
  Elapsed: 00:00:00.00
  satyaki>
  satyaki>
  

  Kind regards.

  LOULOU.

• Key to the left of the URL does not return the Save password.

  I read a lot of discussions and pages on Firefox recording not passwords. I do not have 'private browsing '. I have cookies and history recorded "until they expire". I checked "save passwords". I don't have any exceptions.

  When I go to enter a password, no small window opens asking me to save it. However, a little _does_ keys appear. But the key is grayed out and clicking on it does nothing. This isn't 'show' password saver.

  I disabled all add-ons, restarted and tried again. It was always the same. The sites are those that work perfectly on my desktop computer, but not on my laptop. The laptop is one that won't save passwords.

  It's a Samsung running Windows 7.

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• DV5Z w/HDMI does not fill the entire screen

  I have a DV5Z with installed Blu - ray player. When I connect the Dv5z for my Panasonice 42 in plasma 720 p with the HDMI cable, the entire screen is not used in full picture format. There is a border of 1 inch around top, bottom, left and right.  My DV5Z has ATI HD 3200 graphics card and I do not understand where I need to adjust it so that it works ok. I already had a Dv5T with Intel 4500 and it worked fine, (in fact he filled a little too much about "1/4 of the image has been off the screen) but not the DV5z and I don't want to watch some blu ray movies with 1inch border around the screen. Where are the settings for me to adjust so that I can watch movies under the eyes?

  I adjusted the display settings, and it did not work. What could be the problem I need to adjust?

  I also adjusted the aspect of the TV and H-fill is not anywhere close and zoom isn't closed and 4; 3, that's not what I want to use.

  Any help is appreciated.

  Try using the ATI Catalyst software.  You should see an option for HDTV in the list on the left in the Advanced view.  It has a few decent explanations on how to use it to configure your TV.  I do not have my dv5z before me right now so I can't be more specific.  If you need more details, let me know, I got exactly the same problem and got it working.

• Printer does not print the entire web page.

  Why my new HP Photosmart 5520 copy an entire web page, even if I highlight the entire page or just the text? It will only print banners on the sides and everything autour. It gives me empty text or shaded areas. It gives me the opportunity to listen to samples and when I do, everything seems normal until I print. Help, please. I want to solve this problem before my husband is trying to do! Thank you.

  Why my new HP Photosmart 5520 copy an entire web page, even if I highlight the entire page or just the text? It will only print banners on the sides and everything autour. It gives me empty text or shaded areas. It gives me the opportunity to listen to samples and when I do, everything seems normal until I print. Help, please. I want to solve this problem before my husband is trying to do! Thank you.

  All web pages?
  Or only some of them - the more complicated menu systems and dynamic content on the sides/high/low?
   
  These web pages have generally an option for printing of the true story without all the extras - look for it.
   
  Web browsers do not always print everything they see * as they see it * nor can they still do that (because of the resolution of the web page, etc.)
   
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=buu01105

• Call.phoneNumber () does not return the phone number

  I try to use the new method Call.phoneNumber () which was introduced in 10.3:

  https://developer.BlackBerry.com/native/reference/Cascades/bb__system__phone__call.html?f=call#FUNCT...

  Even if I added the permission of read_phonecall_details according to the documentation, I'm still not received the phone number of outgoing calls placed on the device. The call to Call.phoneNumber () returns an empty string.

  I use the Simulator to 10.3 (10.3.0.698) with Momentics 2.1 and placing me calls using the controller.

  Someone managed to get the phone number? Any ideas on how to make this work would be appreciated.

  It is a known problem in the Simulator, but works fine on a real device.  The bug appeared in Issue Tracker here: Call.phoneNumber () always returns a null in the Simulator

• % ROWCOUNT SQL does not return the expected result

  I have the following function within a package:

  --Update APPERY_JTI_deleted_USERS table:
  FUNCTION fn_updt_app_jti_dlt_usr(
      p_update_co      IN VARCHAR2,
      p_appery_user_id IN APPERY_JTI_deleted_USERS.appery_user_id%TYPE,
      p_outlet_code    IN APPERY_JTI_deleted_USERS.outlet_code%TYPE)
    RETURN NUMBER
  AS
  lv_sql       VARCHAR2(4000);
  lv_rowcount  NUMBER := 0;
  BEGIN
  
  lv_sql := 'UPDATE APPERY_JTI_deleted_USERS SET '||p_update_co||' = 1 WHERE '||p_update_co||' = 0 AND OUTLET_CODE = '''||p_outlet_code||''' AND APPERY_USER_ID = '''||p_appery_user_id||'''';
  
  --EXECUTE IMMEDIATE lv_sql;
  EXECUTE IMMEDIATE 'BEGIN ' || lv_sql || '; :z := sql%rowcount; END; ' USING OUT lv_rowcount ;
  
  RETURN lv_rowcount;
    
  EXCEPTION
  WHEN OTHERS THEN
    RETURN -1;  
  END fn_updt_app_jti_dlt_usr;
  
  

  The function called several times as part of a job. Basically, the main function (Say M), call a few functions (for example A1... A9). Each of these functions is to do something and updated the application using the above function. Therefore, each of the nine functions will call the above function with different parameters.

  The problem that I am facing is:

  First run, invoke only first of all for the above function will return the positive result ($sql rowcount > 0). When I run M the second time, only first and second calls for the above function will be to return positive results and so on.

  How odd, it's that if I change the values again and run a function M, it will start from the beginning. And what strange more, the dynamic update statement is executed correctly and data are updated successfully. It's just sql rowcount % do not return is not the expected results.

  I tried to run execute immediately without (begin, end). I also tried to run it without HELP ON. It's always the same. I'm really confused, what Miss me here.

  I don't know if this is relevant. But for what it's worth, invoking the function above updates the SAME lines in the table appery_jti_deleted_users that the columns are different. So for all the work, the same lines need to be updated. Each function (A1... A9) will call the above function to update a different column of these lines.

  If you REALLY want to help you having US SHOW, not tell us:

  1. WHAT you do

  2. HOW to

  3. WHAT results you get

  4. WHAT results you expect to get

  First run, invoke only first of all for the above function will return the positive result ($sql rowcount > 0). When I run M the second time, only first and second calls for the above function will be to return positive results and so on.

  How odd, it's that if I change the values again and run a function M, it will start from the beginning. And what strange more, the dynamic update statement is executed correctly and data are updated successfully. It's just sql rowcount % do not return is not the expected results.

  Perhaps that the foregoing is true and maybe he's not. We have NO WAY of knowing because you don't SHOW US anything.

  I tried to run execute immediately without (begin, end). I also tried to run it without HELP ON. It's always the same.

  Yet once you showed us NOTHING >

  You do NOT FOLLOW best practices when you use dynamic sql statements: the sql statement real so that you can print:

  1 SEE what's running - make sure there are no syntax errors, and it seems to be what you wanted

  2 EXECUTE/TEST manually - to see if he really runs without error and see what results it really give.

  3. FIX any syntax or other problems and retest it

  Instrument properly your code and you won't have the problems you are having.

  You should know by now what are the parameters are transmitted when you run the function. So, there are at least three sets of these parameters.

  So you should be able to:

  1 run the instrumented manually function three times

  2. see that all three SQL statements are

  3 manually run these instructions

  4. see that the number of lines is after each execution

  We have no idea of what the output of the function is every time you call it. Apparently, you have, if you save the results of the function somewhere, but you didn't post any of this info.

  We need real details to help you - just listen to your story is not enough.

• ESXi 4.1, does not use the entire RAID 5 on Dell R810 datastore

  I installed ESXi 4.1 on a Dell R810.  I've raided the first two drives in a RAID 1 and installed ESXi.  The 4 remaining disks are in a RAID 5 for the main data store.  ESXi acknowledges that the RAID is 2.7 TB but will only create a.7 TB or 744,75 GB data store.

  I did the same thing on several Dell R710s without problem.  Someone at - it ideas?  I guess it's a driver issue, but I do not see updates to driver for 4.1 for Dell R810

  The maximum size of a 4.1 data store is 2 TB less 512bytes. If you want to see the entire data store, you will need to upgrade to ESXi 5

• Picture does not fill the entire page

  Hi guys,.

  I placed a picture on the stage. This image is supposed to be a background. I've intensified this image covers any stage is without doubt. When I test in browser there are white margins on the left and right of this image, in other words, the image does not meet all of the web. Could someone tell me please how to fix?

  Thank you.

  Try to use this to your image

  SYM. $('yourImage').css({)

  'background-image': 'url("imageName.jpg") ',.

  'background-repeat': 'no-repeat '.

  "background-size': 'cover."

  ' - moz-background-size ': 'cover '.

  });