dbms_parallel_execute sql_stmt with output parameters

Similar Questions

• Should what output parameters I use for rendering the pc for mac final cut 10

  I recently spent from mac to PC and must make files to use on my machines to editors who are pimps. I need to know what output parameters, I should use to pull them into my graphics without any problem and must also ensure that the alpha channels are also available in the CF.

  It's a QuickTime .mov file. Now, you can do it is a PNG with AE sequence if you wanted, but I didn't think this is what you wanted. Select QuickTime as the format and PNG in the codec section. If you make sure you choose RGB + Alpha in your output module, you will also get your alpha channel.

• Restore the output parameters

  Hello world

  I played with different output parameters to find the most perfect setting to make my animation.

  Now, I would like to return to the default settings which, after effects, came with, but I can't find a reset button? If I restart the program, he remembers the last setting that I used.

  Any idea on how I could do this?

  Thank you very much

  Sandra

  To reset the application preferences, read.

  At the exit of add/delete/edit module parameters, read this page.

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• Problem with output 5VDC NI 9411 channel

  Hello

  I'm having a problem with output 5VDC NI 9411 channel. According to the specification of the module, it was stated that the module required external power from 5 to 30 VDC. Game of supply the module with the requirement of tension, I am still unable to get the output voltage of the output channels. Does this mean that the output voltage may be available depending on the program?

  Thanks in advance,

  Kind regards

  Mike640

  Hi Mike,.

  Thanks for posting on the forum of National Instruments.

  You should still be able to get an output voltage in properly feeding the NI 9411 and your external device.

  If you don't have a power supply of 5V to power the external device directly, or if you want to simplify the cabling, you can connect an external power supply to the Vsup and COM terminals on the connector terminal block screw NI 9411 and connect the external device to one of the pins Vout + 5. If the external device is already powered, you have not need connect a power supply on the NI 9411 or plug the Vout of + 5 to the external device.

  I hope this helps.

• Script to get use of the memory with the parameters like VM uses, active, granted

  
  Hi friends

  Can someone help me get the powercli scripting to get the use of the VM folder memory wise with metricks as consumed, Active, granted for two weeks with a period of time for example special hours of buisness with output to a CSV as below

  Vmname	Esxhost	ActiveMemory	Grantedmemory	Memory consumption	Folder

  It seems that the statistical level history interval 3 (last month) is not set to at least 2.

  The counters active and issued both require level 1.

  

  

  Consommé requires level 1

  

• 301 redirect with get parameters

  Hello

  My client's old site with the url structure http://site.com/folder/folder?page=1234

  All of these pages should be redirected to the new page in the new Adobe BC site.

  But it seems impossible. Redirection does not work with get parameters and works without it.

  Is there a decision?

  This is because there is only a single page and player parameters things like ajax to load content so 301 redirects do not work.

  You must run the google web master tools and apply the tricks of setting filters.

• How to run the powershell script of command with several parameters

  Is there a way to run a powershell script from the dialog box run with several parameters? In addition, the path to the script contains spaces, for example, c:\powershell scripts\script.ps1.

  Take a look at http://www.powershell.nu/2009/12/16/running-scripts-with-arguments-in-powershell/ which explains how to pass arguments to a script.

  André

• ThinApping an Application with several parameters

  Still new to ThinApp please bare with me.

  I have captured a request and I now have an App.exe and an App.dat.  Then, I opened this request, altered some settings and captured these changes & named settings1.dat.  I have also settings2.dat, settings3.dat and so on.

  App.exe is about 50 KB
  App.dat is about 80 MB
  Settings1.dat, Settings2.dat and so on is 2 MB.

  How can I go on these chaining so Settings1.dat/Settings2.dat/etc calls and run App.exe and App.dat?

  I don't want to wind up with more than 80 MB file, which is the only way I could make it work.

  These settings are changed are all stored in HKCU, so this is a simple registry change.

  If you want to get started ThinApped application with different parameters, you need not separate .dat files. What you can do, is something like the following:

  1. Install your application, change its settings and capture it with ThinApp.
  2. You change the application settings, and export the appropriate registry key.
  3. Repeat step 2 all the time.
  4. Go to your project directory and create a subfolder in the folder where your application executable.
  5. Copy the .reg files exported in the subfolder created in step 4.
  6. Create a script or a batch file for each .reg file, and then save it to the folder created in step 4. The script file or batch must have the necessary code to merge the .reg in the registry file.  Also, you must run the main script executable file or batch file.
  7. Add the necessary lines in the package.ini file to create an entry point for each script or batch file.
  8. Build your application.

  Another approach, you can create a menu with an InputBox statement. In this way, you can choose load settings before running your application.

  1. Follow the steps 1 to 5 of the previous approach.
  2. Write a script to create a menu and merge the corresponding .reg file into the registry according to the user's selection.
  3. BUiD your application.

• Two sequences with different parameters?

  In the first Pro CS6, is it possible to use two sequences with different parameters?

  Yes, no problem.

  You can make as many sequences with different settings as you want.

• Script queue CM with output for allocated, running and waiting for process

  Hi all
  
  Could someone please share the script which gives the result as below:
  
  Script Manager simultaneous tail with output for allocated, running and waiting for processes within a single script.
  
  Thanks for your time!
  
  Kind regards

  You can find a lot of scripts in the old nets.

  Simultaneous treatment - what are the meanings of the Codes in the STATUS_CODE and the PHASE_CODE FND_CONCURRENT_REQUESTS Table columns? [152209.1 ID]
  ANALYZEPENDING. SQL - analyze all applications pending [134033.1 ID]

  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT_REQUESTS+and+query&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT_REQUESTS+and+time&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT_REQUESTS+and+STATUS_CODE&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001
  https://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT_REQUESTS+and+PHASE_CODE&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

  Thank you
  Hussein

• see link with several parameters

  Hi all:
  I use af:golink to call a new page with different parameters like the code below:

   <af:goLink text="Run Report" styleClass="xes" destination="/printreportservlet?reporttype=pdf&filename=new_report.jasper"  targetFrame="_blank"/>

  but when I use it cann't page display "website cannot display the page.
  
  but when I use a single parameter as:

   <af:goLink text="Run Report" styleClass="xes" destination="/printreportservlet?reporttype=pdf"  targetFrame="_blank"/>

  or

  <af:goLink text="Run Report" styleClass="xes" destination="/printreportservlet?filename=new_report.jasper"  targetFrame="_blank"/>
   

  It works successfully,
  so is there any problem to send several parameters while asking us to servlet.
  
  Best regards

  What happens if you put this URL in the address bar directly, it works? If it isn't, then it seems that the problem is with your servlet. If this does not work, try to escape the ampersand in the URL. I can't paste the value here, as the forum he transformed into an ampersand, but you can read [url http://articles.techrepublic.com.com/5100-10878_11-5032714.html] this

  JOhn

• Call stored procedures and using its output parameters in a report

  Hello
  
  I have a procedure defined in a package on the database. This procedure returns a number of output parameters. How to call this procedure and use the output parameters in my report?
  
  Thank you, Mark

  Depends on the level at which the procedure should be called. If its at the State level, call the form in the trigger-REPORT-BEFORE (or AFTER-PARAMFORM) and store the off-values space reserved columns. These you can use anywhere in your report.

• create the table with the parameters of storage in a locally managed tablespace

  Hello
  Can we create object with the parameters of storage in a locally managed tablespace.
  
  CREATE TABLE my_hash_table_6)
  name VARCHAR2 (30),
  value VARCHAR2 (4000))
  STORAGE)
  INITIAL 1 M
  NEXT 512K
  PCTINCREASE 0
  MINEXTENTS 2
  MAXEXTENTS UNLIMITED)
  
  
  default tablespace users is successful locallly.
  Then extended this table management will be managed according to the tablespace or storage settings which
  has been specified when the table was created.

  Hello

  This means that we don't have to define NEXT, PCTINCREASE, MAXEXTENTS at the object level.
  Then, these settings are applicable to Dictionary managed tablespace or what?

  Yes that's right, understand you is correct

  Can we define NEXT, PCTINCREASE, MAXEXTENTS at the level of the object in the dictionary managed tablespace;

  Yes, you can, but go for DMT, is not very good, because you advantages compared to LMT, just think about it before going to the DMT, than I suggest.

  -Pavan Kumar N
  Oracle 9i / 10g - OCP
  http://oracleinternals.blogspot.com/

• Several uses for the final product, need help with Render & output parameters

  Aloha, this is my 1st time in this forum... posted this question in Premier Pro and has been mentioned here.

  I created an effect straight project. I want to make four 4 very specific uses.  Unfortunately, I don't know anything about these formats to be given options in AE - CS4.  One of the many 'rendering settings' and 'output module' settings 'make model '.  This seems the best option for me given my future use: 1) for the DVD; (2) for electronic mail; (3) for YouTube. (4) my web site.  I read and reread the rendering and export options in the manual of use-AE CS4 without success in understanding what each option should be used for.  I need help in the translation of pixelpicker-talk.

  Can someone help me about these accurate "rendering settings" and "output module" parameters listed in AE in the option "make and model"?

  Thanks a lot... come visit the watrer is warm and clear as always.

  KonaDon

  I understand - I think the article using After Effects is a very complete resource, explaining the various features and their purposes. But the real world is full of special cases that are very difficult to address in a manual. In addition, it is a moving target. Different best options today probably the best choice, next year.

  Let's see if we can help here:

  1-. DVD: on the technical side, it is always MPEG-2. A very specific taste of MPEG-2. But while After Effects will let you export a file of this type (choosing the MPEG - 2 DVD is predefined in the output Module), it is also true that most of the applications (such as Adobe Encore DVD) DVD authoring are very friendly in terms of letting you wear one (ideally, uncompressed) Quicktime or AVI (which in no way is compatible DVD) and do the encoding in MPEG-2 for you. So it is up to you: you can encode EI using the preset DVD MPEG-2, or you can use an application of coding specialized (such as Adobe Media Encoder in stand-alone mode) or simply let the DVD authoring application do the encoding for you. This should be very simple and in this case, you can simply render a Quicktime or AVI file without loss (there is a model of output Module called "Lossless" who will take care of everything. You can use the default value, the 'best' model to make settings in most cases).

  2-. E-mail: on the one hand, you need something that is really light and as good quality as possible. In the other, you want something universal compatibility, which can be read in all or almost all computers. H264 (advanced version of MPEG-4) format is really good in terms of efficiency, but its ' adoption is perhaps not as widespread yet. Flash Video (FLV) is really good in this regard. In this case, you could choose Adobe Flash Video (FLV) as the format in the output Module and then choose preset FLV 'Flash 8 web small' for this purpose.

  3 YouTube: it's not that simple. The ideal format for YouTube is not quite exist, they insist on the re-encoding each file that you download, even if your file is technically identical in every way to their versions. So what you want here is something that looks good and it isn't huge to download. This all spells 'H264', in my opinion. The details depend on the question of if your Composition is HD or SD, 4:3 or 16:9, etc. Strange as it may seem, the big "iPod" preset for the format H264 is a good starting point. You can customize it to increase the speed of transmission a little (maybe 2 or 2.5 Mbps, against 1.5 Mbps).

  4 website: even once, you need something that most people already have in their computers. Flash Video is an excellent choice, since about 98 percent of users have the Flash plugin. But in this case, you can have more great heights and flow rates, so you can use the "Flash 8 big' defined by default as a starting point. Once the Flash 10 plugin (which now supports the H264 in addition FLV) spreads in the future, you could standardize on H264 in a delivery format, with different settings for each type of destination.

  I hope this helps.