Whenever I start my computer it will go to Dell Media Direct and will not bring me to my profile

Similar Questions

• Whenever I start my computer it will boot repair and that's what he tells me "c2 error checking settings = 0x7, ox110b, 0x0, oxb029a.»

  Whenever I start my computer it will boot repair and that's what he tells me "c2 error checking settings = 0x7, ox110b, 0x0, oxb029a.»

  All this began after Microsoft security essentials did an update in February.

  Hello

  Method 1

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem still persists. To see how to the SFC Scan click on the link below and follow the steps in the Kb article.

  http://support.Microsoft.com/kb/929833

  Method 2:

  I suggest you perform the disk check and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  hope this helps,

• Hi, I keep getting a pop up whenever I start my computer stating sync apple laptop has stopped working and the solution is to re install, but I don't know where he comes and he can't find in my list of programs.

  He gave me a bucket id and a so-called solution is available, but I don't have a clue! There are 3 programs from apple, that I installed it but none of them say notifier synce apple, it also shows that a pop-up based apple window stopped working pleas help thanks!

  He gave me a bucket id and a so-called solution is available, but I don't have a clue! There are 3 programs from apple, that I installed it but none of them say notifier synce apple, it also shows that a pop-up based apple window stopped working pleas help thanks!

  Hey dizzydopeymare

  There is nothing to do with vista

  It's apple software problems

  It is related to itunes quicktime etc problems

  Contact apple support

  Apple newsgroups at links below

  http://discussions.Apple.com/thread.jspa?threadID=1949073

  http://discussions.Apple.com/thread.jspa?MessageID=11315722�

  Apple support at the link below

  http://www.Apple.com/support/

  Walter, the time zone traveller

• I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. I use downgrade XP on vista.

  I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.

  Hi Susancav,

  Welcome to Microsoft Windows Forums!

  I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  Thank you and best regards,

  Bindu S - MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I start my computer this message: MS Windows McAfee Request message 'c:\windows\system32\sc.exe"start 'Service update Garmin base'

  Original title:

  MS Windows message asking McAfee

  Whenever I start my computer this message appears.  I answered Yes and not exercise.  How can I eliminate the aggravation?

  

  Try this:

  Delete any file with Garmin in his name at the following location:

  -> GoTo start click all programs->, click Start.

  Once done, restart the PC and then check.

• Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer. If I select 'YES', the system restarts and I get the same message.

  Original title: "RESTART YOUR COMPUTER IS REQUIRED" MESSAGE LOOP

  Whenever I start my computer with Windows XP, I get the message "it is necessary to restart your computer.  If I select 'YES', the system restarts and I get the same message.  Always shut up if I keep you select 'YES '.  I can work around the problem by choosing 'NO '.  How can I avoid that this message that appears constantly when I start the computer?

  http://forums.techarena.in/Windows-Update/1095335.htm

  read the above and follow the tips on adobe updater and maybe this will help.

  If this is not the case after return and include information about your machine, svc pk and IE #.

• Whenever I start my computer, I see the message, "C:\Windows1\Kjoralir.dll" is missing.

  Whenever I start my computer, I see the message, "C:\Windows1\Kjoralir.dll" is missing.  This happened for several months, but I just ignored him.  Don't know if it's related, but a user cannot disconnect without pressing the Windows key and the "L" key at the same time.

  Tonight I ran a registry repair program, and it fixed a lot of errors.  But, always, the message came after a reboot.  I don't know what it is, what it does or how to remedy the situation. Can anyone help?

  Thank you!

  You may have damaged even more by running a registry cleaner for Windows. The best registry cleaners are snake oil, and at worst they will damage MS Office and sometimes Windows itself. Details:

  http://aumha.NET/viewtopic.php?t=28099

  For the problem, Googling for this file appears your post. When you get no hits for a filename on Google, chances are high that it is a malicious program file. Either you have uninstalled the malware program or your antivirus/antispyware program did. In all cases, a reference has been left in the boot file. You can remove the reference by managing your startup.

  Because you had a piece of malware, the chances are too high you had others. It would be a good idea to scan. I recommend to download and install MalwareBytes' anti-malware (MBAM) from http://www.malwarebytes.org . The program is free. (There is a paid version, but you don't need to buy it to remove the malware).

  Manage startup:

  (for XP) Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560

  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx
  MS - MVP - Elephant Boy computers - don't panic!

• Whenever I start my computer I am prompted to enter my product key, when I go in I get an error message: 0xC004E003.

  Product key error

  Whenever I start my computer, I'm prompted to enter my product key. I downloaded a software that allowed me to locate the product key, but when I go in I get an error message: 0xC004E003. I searched the internet for a solution but have not been able to find one. Any suggestions? I have a HP Pavilion dv6700 Notebook PC if that helps.

  "Tbwright4" wrote

   

  I don't think I've changed any hardware. It's just kind of came out of nowhere last year. Its something I can live with, but I thought why not see if I can get it figured out.

   

   

   

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool

  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )

  Once saved, run the tool.

  Click on the button continue, which will produce the report.

  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.

  -* in your own thread *, please

   

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!

   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

  I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

  IRQL_NOT_LESS_OR_EQUAL

  and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

  PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

  I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

  Thank you very much!

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.
  Mick Murphy - Microsoft partner

• Whenever I start my computer, I get the message: "this file doesn't have a program associated with to perform this action...". »

  Whenever I start my computer, I get the message: "this file doesn't have a program associated with to perform this action...". "for my external drives.  I use these daily backup USB drives. It seems that the backup will run, if I acknowledge this message by clicking OK. If this is not the case - it won't. Why is that happening and how can I solve this problem?

  You can repair the associations used to readers.  One of my fellow MVPS, Shawn (no relationship lol) has default binding settings in his site here:

  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Just scroll down to find the link of 'reader', click it, and launches the link.  You can do the same thing with "folder" and "directory" to be thorough.

• I need to reconnect my DAQ hardware, whenever I start my computer... Why?

  Hi, I'm Ricky, a process engineer intern at a company. I'm still new to LabVIEW and NI MAX. We have a cDAQ9181 set up for air tools and the other in place for an encoder. Now, whenever I start my computer the compressed air tool box is already connected, as expected. However, the encoder it is not. When I click on it in the sidebar, it lies and connects, but the encoder itself does not connect until I have perform a self-test. These devices have slept hip and connected from one day to the next and no issue performance - they must be connected as soon as the computer is on. Anyone know what is happening and how to fix this? I can try a picture if needed.

  Thank you for taking the time out of your day to offer some help value! -Ricky

  I did some research, and it may very well be that this is expected behavior.

  Before being able to run OR-DAQmx tasks on a network cDAQ chassis, you must book the current host system chassis. Through the 'test' you do, I think that it also reserves the chassis. When a chassis cDAQ and PC lost communication due to the system powering down, the chassis must be reserved by the system host again. 'Sleep mode' could also be a problem because most of the PC systems unplug or turn off ethernet after a certain period of inactivity. To avoid having to go through MAX OR book the chassis, you can use the "reserve Network Device.vi DAQmx' who book you the chassis cDAQ for the system calling the VI.

• whenever I start my computer, I have a message that readsusername and the password do not match. How can I remove this message to come whenever I start my cpmputer more?

  whenever I start my computer a box appears in the middle of my screen with the title identify yourself and the message user name and password do not match (you provided xxxxxxxxxxxx).

  I would like to know how I canremove this message appear each time I start my computer?

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the version of the operating system that you are using?

  I suggest that you try following the steps mentioned below, that if you use Windows Vista and Windows 7 and check to see if it helps.

  Step 1: Check in SafeMode with network.

  You can also check if the problem persists in safe mode with network and check.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  If you are able to see the start icon, then executes the method 2.

  Step 2: Perform a clean boot and check.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Hope the above information is helpful.

• Whenever I start my computer after the office's I get a windows firewall disabled alert

  Whenever I start my computer after the office is responsible, I get a warning from windows firewall disabled. The latter for more than 60 seconds. After that, my firewall is on.
  How to solve this delay?

  Hello

  What is firewall WIN XP or any other third-party firewall?

  If it is integrated, you can reset the firewall in factory default state. Run from the command prompts this command:

  NETSH FIREWALL RESET

  How to run the command prompt:

  Click on Start - run - write CMD , and then click OK

  LC

• Whenever I start my computer, a message appears: "error loading C:\WINDOWS\ufidehipen.dll. The specified module could not be found. Can't fix it!

  Whenever I start my computer, a message appears:

  "Error loading C;\WINDOWS\ufidehipen.dll the specified module is not found."

  Once the message is erased my computer works normally.  Ironically received a hoax call, claiming they were from Microsoft Support.  I did not claim.  Have security of Norton 360.  A run 'getcleaner' and ' getmalwarebytes.  A ran all the Microsoft diagnostic tools and still have the same problem.
  If anyone can help with a solution to my computer problem?

  Hi Caspwilson,

  Not answering all calls for support!

  Download CCleaner from www.piriform.com/ccleaner and scan your system.

  I hope this helps.

• I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  I get an error code whenever I start my computer. I have loaded several packs of registry repair software but cannot get rid of the message. The message bed error loading c:\windows\system32\pofusido.dll the specified module is not found

  Hello

  I googled this file pofusido.dll and it could be caused by a virus.

  I would suggest that you disable the restore mode as viruses use it to reinstall set apart them.

  Download and install the free http://www.malwarebytes.org/

  Restart the computer and keep pressing F8 to get into safe mode with network connection.

  Once you have updated Malwarebytes run and see if it can remove the virus.

  So delete all cookies in your internet Explorer.

  Please keep in mind that my answer is based on the information in your message. More the better I can answer, Slan go foill, Paul