DBMS_SCHEDULER job does not start if use_current_thread is set to false

Similar Questions

• HP ENVY laptop - 15-k101nx: HP envy 15 does not start after failing to set up

  Failed to configure Windows (it took so long and shows no percentage) so I turned off my laptop, removed and unremoved battery and turned on it. The problem is it does not start and the screen is all black with little light on it.

  What I've done so far:

  -J' tried to restore the BIOS by following the instructions here say: http://support.hp.com/ee-en/document/c02693833 ; However, I still have the same problem after restoring the BIOS.

  -J' also tried a few hardware diagnostic test, he failed in the test of ' disk hard short dst check "and gave me chess and product IDS.
  -He also failed in the Startup Repair tool

  My laptop is still covered with warranty accdg here 'http://h10025.www1.hp.com/ewfrf/wc/weInput?lc=en&dlc=en&cc=us&tmp_weCountry=&tmp_weSerial=&tmp_wePro... '. but the characters upon receipt of my laptop is already melted aways since they are written on a thermal paper.

  BTW, I can always open the command prompt and the research on the C: drive and see my files, but don't know what to do whenever I used the chkdisk command, it asks me to do things I'm not familiar with.  I just heard that the chkdisk command solves the problem temporarily.
  
  What do you think are the alternatives and solutions to the problem of my laptop?

  Yes the hard drive needs to be replaced. Just call support and they will have it replaced for you under warranty.

• DBMS_SCHEDULER job does not

  Hi gurus of the oracle

  I created a scheduler job to GATHER_STATS. but it's not not running.

  BEGIN

  DBMS_SCHEDULER. () CREATE_JOB

  job_name = > 'GATHER_SCHEMA_STATS ',.

  job_type = > 'PLSQL_BLOCK ',.

  job_action = > ' START

  DBMS_STATS. GATHER_SCHEMA_STATS ("RING_TEST");

  END;',

  start_date = > 11 July 2014 04.28.00AM AMERICA/New_York '.

  repeat_interval = > 'FREQ = WEEKLY'.

  enabled = > TRUE,

  Comments = > "Collection of statistics from schema");

  END;

  /

  I could run this work manually, but its starts not at all, nothing is there in the alert also log.

  Thanks in advance

  Concerning

  REDA

  Hi reda,.

  I guess that's normal because you specified a start_date in July 2014, while labour will not start before that.

• Recovery partition is there but does not start Recovery

  Hello
  
  When you try to restore the image (F11 at startup), the laptop seems to be as he tries to start missing Windows installation (Windows Boot Manager error page).
  
  Partitions 'SYSTEM', 'HP_RECOVERY' and 'HP_TOOLS' have not been affected. Recovery files of ~ 15 GB are still there!
  
  The Windows (2nd primary) partition was deleted and then recreated as an NTFS partition. Since then, the recovery process does not start.

  How can I restore my intact HP_RECOVERY partition system without using recovery DVD? (I can't access right now.)
  
  The partition Windows has need of a specific disk label? What is the magic that breaks the recovery when an NTFS partition is all simply deleted and then re-created?
  
  Peter

  HP ProBook 6550 b (WD701EA #ABD)

  Solution: How to fix F11 penetrates is not in the Recovery Manager process

  You will need:

  -This fix by HP: difficulty to the Multi-partition HP Recovery Manager (the ProBook 6550 b is not listed as a supported model, but it worked for me)

  -installation of Windows (see partial solution above) a job to install the fix on your ProBook

  or

  -sufficient knowledge to extract the winre.wim missing the fix above, copy it to your recovery partition and to apply any measures necessary (I did this)

  Steps to follow:

  -in your work on your ProBook Windows installation open the file downloaded "sp48415.exe".

  -the files will be extracted in "C:\swsetup\SP48415", open this folder in Explorer

  -Right click on "F11SPFix.cmd" and run as administrator

  -the patch will be applied

  Restart und press F11 at startup to enter your recovery Manager (hopefully) fixed.

  Credits to HP support.

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Satellite P300-1CN - system and the BIOS does not start

  Hello!

  I have a problem with my laptop Toshiba Satellite P300-1CN. When I start my laptop does not start in Windows.
  When I tried to go to BIOS, doesn't let me do as well. I can see only the Toshiba logo. When I press F2 or F12 I received the message:

  + Enter in the configuration. Please wait + or
  + Entering the MultiBoot Menu. Please wait +.

  I tried + ESC +++ Power Buton + then + key + F1. I can see all the information:
  + Phoenix Bios 4.0 release 6.1 +.
  + Cpu = 1 processor detected, cores per processor = 2 +.
  + Intel Core 2duo T5800 @ 2.00 GHz +.
  + 3070 M RAM passed system +.
  + 2048 KB L2 Cache +.
  + Shadow system bios +.
  + Video Bios shaded +.
  + Fixed disk 0: Toshiba MK2552GSK +.
  + ATAPICD; ROM DVDRom... +.
  + Mouse initialized +.
  Press F2 to enter Setup or press F12 to enter MultiBoot Menu selection.

  but after the computer laptop just gel but the processor is still running.

  I removed the HARD drive and tried to put different the a (work laptop) - still does not
  I removed the memory and tried to put different the a (work laptop) - still no job

  I have no idea what it is causing the problem.
  I have this laptop over a period of 2 months.

  Thank you.

  > Looks like I have to make a phone call to the Toshiba Support Centre
  You must enter in Toshiba authorized service provider contact such as suggested by Luke above
  All the details can be found on the Toshiba page. (the path above will point you to the ASP database)

• R51 has black screen - does not start

  This question has been taken before, but I think I may have a unique situation.

  My R51 worked perfectly and was maintained during the 8 years that he was with me. I wanted to update my RAM and downloaded the update to the BIOS and chipset drivers updates.

  After that the tension I pulled the old 256 MB RAM sets under the keyboard and the bottom of the machine. Then I inserted the only 2 GB of RAM into its slot under the keyboard and reassembled it.

  Black screen / no start

  Went out the 2 GB replaced sets of 256 MB and it worked fine for a few hours that I looked for reasons why the 2 GB would not work.

  ' Sudenly the screen goes black and the closed system.

  It will supply (battery light / light green status), but the screen is black and it does not start. The fan is running and the battery costs.

  I tried hitting F12 and F8 but nothing.

  Then, I stored it down and pulled the chip near the connector of the screen and replaced by a spare part I had in hand... still nothing.

  From the CPU and replaced by another I had on hand - nothing new.

  I put all the oringinal gear back in place and tried to put pressure on the Board of Directors for the boot but still nothing.

  Help, please! I'm not very tech savvy but as you can see I'm not afraid to try.

  Thank you

  Thanks George!

  I was able to get the other 51 R spare parts and does the job!

  Send this message to him now.

  I want to send my thanks to all on this forum. It was the first time ever, I cracked the case on a laptop. Thanks to posts in these forums, I had confidence and information to see the job through.

  I have more no fear an attempt to repairs on the Thinkpad.

• Clean install of windows xp, PC does not start Internet Explorer

  I did a clean install of windows xp, but my PC does not start under Internet explorer, nor can I install browser of my ISP with the drive, they gave me.

  I made a second clean install & noticed that the installation seems to ignore the part that asks about the connection to the internet. At this point, the command prompt screen flashes up & then closes. The installation continues her & ends.

  Can someone help me please?

  Good job; Yes!

  Your specs are here:
  https://support.Dell.com/support/eDOCS/systems/dimc521/en/SM_EN/specs.htm
  Since you have the video and audio embedded, download the drivers for which follows on a USB key:
  • Chipset (nVidia_SMBus_A02_R132919.exe)
  • graphics - on Board (driver nVidia: R133260.) (EXE)
  • audio - aboard (the SIGMATEL driver: R132395.) (EXE)
  • network, which will allow you to get online! -Broadcom driver: R149798. EXE

  Then download other files mentioned in my instructions (SP3, IE8, MSE) and go to town!

• HP Photosmart C6380 all-in-one intermittently print job does not print

  My HP Photosmart C6380 all-in-One has a problem with the print jobs that fail intermittently to print the first time that I send it to the printer.  I can see the print job listed in the queue, but it fails to print.  I might have to send the job once again, twice or 3 times before it will finally print.

  Try to stop and start the print spooler. I will include the instructions below.

  1. click on the start menu.
  2. in the search box, type services.msc and press enter on the keyboard.
  3 scroll to find print spooler.
  4. Select the print spooler in the list.
  5. on the left side of the window, you should see the words stop and restart in blue letters. Click on stop.
  6. now it say start. Click Start.
  7. close the window.

  If this does not work, try to bypass the print spooler. I will include the instructions below.

  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. make sure that "Print directly to the printer" is checked.
  7. click on apply to save the changes.
  8. click OK to close the window.

  If it still does not work, go back and set the printer to use the spooler again. After that, try to assign the printer to use a different driver. The link below will take you to these instructions. Let me know what happens.

  http://goo.GL/zCk2r

• Computer does not start. Said diagnosis ci.dll file is corrupt.

  Original title:CI.dll is corrupt

  My computer does not start and goes straight to the Startup Repair. I read the diagnostic tests and get that ci.dll is corrupt. How can I fix this. I can't go in safe mode.

  Hello. If the excellent suggestion of engineering support is not a solution, I might suggest looking at your problem in a different way. If after trying to start sound in different modes and after letting windows to attempt to repair himself using tools, you are at the same point, there is an excellent chance that you have a virus rootfit. This variant of the particular virus causes a loop of endless startup repair.

  I had to deal with exactly the same problem you just this last weekend, and if I do a job of tech on the side that was new to me. I searched the various forumns filled with good information provided by many who are far more experienced than I am, but finished as a result of my guts and succeed. I'm pasting below 'A' solution, it worked for me and if you are comfortable around your PC, it is a completely physical process of 20 minutes (time includes blow and clean the case...) (-8..) So take a look and see if what worked for me might work for you as well. Good day.

  Hello... YOU have a rootkit virus. He goes around, I had to kill one this weekend. Now, my solution, while it is easy for me may not for you. I do a little IT WORKS so I have a converter that transforms all types of disks in usb drives. I just pulled on the desktop player and as soon as I connected it to my laptop, ZoneAlarm on access scanner killed and it was all over. IF you have the possibility of another machine, you can pick up a converter for about $30. If you're like most people, the thought of again is less pleasant to the taste. Now, I am 100% convinced that your repair loop is driven virus, no, but 98% is not bad. Good day!

• DHCP service does not start after change of vmnetdhcp.conf

  Hello

  My installation includes a host running windows 8.1 pro and guest is an Oracle Linux 6.5 with NAT. As I searched for a static IP address for the comments I went ahead and added the following to the end of vmnetdhcp.conf

  host computer2 {}

  Hardware ethernet 00: 0C: 28:D9:D5:95

  fixed address - 192.168.37.3

  }

  As soon as I try to restart the dhcp service falls down. Even if I just restart machine job changes, the DHCP service does not start. When I do a reset of the network through the network Publisher configuration and simply accept a dynamic allocation of IP address to things normal race comments. The same configuration works fine on Windows 7 Pro host. Any help would be appreciated.

  Hello

  Thank you for using our product.

  I tried the same set upward on Win7 and Win8.1 host, both of them work well.

  So I guess that there is a syntax error when setting up vmnetdhcp.conf.

  Maybe missing ';' at the end of each line?

  An example would be like this:

  host computer2 {}

  Hardware ethernet 00: 0C: 28:D9:D5:95;

  fixed-address 192.168.37.3;

  }

  Please check and try again with kindness.

  Thank you!

• Just renewed my membership to the Muse and the program does not start, what can I do?

  I changed my billing data, the charge was made, but just Muse does not start. It is for me the survivor of the screen of your subscription again and again and again. What can I do? I have an urgent job to do.

  Refer to this:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Delete the old information in the OOBE and SLStore folders and connect again.

  Mylenium

• AE CS4 does not start on the Multi-Core system

  I use an older version of After Effects (AE CS4).  I recently built a new job which is bootable in different choices of multicore (up to 40 cores).

  I can start AE CS4 on the configs of start up to 16 cores.  But above all that, AE CS4 does not start.  It will not even appear the start screen (but the AfterFX_32.exe process appears in Task Manager).

  I was wondering if it is possible to get the AE CS4 to work on configs with more than 16 cores?

  Thanks for all the ideas!

  N ° there is no way because at the time operating systems did not use more hearts and thus the libraries underlying system down to the C/C++ code can not handle.

  Mylenium

• My office does not start

  I have a lack of treo 680 unlocked and installed in sync software on my new macbook pro leopard.  I started to use the synchronization feature and if used to the weird (compared to the desktop on windows) presentation Office when I noticed that I wass get all kinds of duplication and even triple jobs over my clocks.  I ttied to solve this problem with the missing sync help but nothing helped. I decided to try again.

  So I uninstalled missing sync andI I went back to my PC and cleaned my laptop with my desktop PC.  I couldn't uninstall desktop for mac, so I reinstalled missing sync and made a hot sync.  I then noticed that I would have the same problem I got a notice of missing sync I got more than 5% of sync to do.  I was wondering how this could be because it was supposed to be a new synchronization with any info on my desk. I stopped the hot sync function and tried to see what was going on by opening my computer desk.  I tried several times. I tried to download to new desktop mac and re - install.  That has not worked, I kept getting the message that I got the latest version on my mac and I couldn't re - install.

  Which brings me to my original topic statement.

  My office does not start while I can clean or do a sync again.  Please someone help!

  Jonesp

  Hi again to AlanG.

  Evreything seemed to have worked OK but I guess I'll know for sure when I do the second sync.  So far so good.

  I just wanted you know also that you can't substitute the missing sync conduits, they always synchronize.  That is why I will also keep a last copy synchronized on an old utility with windows computer that I have not managed to get rid of even while I always copy a maximum of 1 day old.

  Thank you again for helping me so quickly and have been available to respond to me several times over the past day.

  Best regards

  Stone

  Message is about: Treo 680 (unlocked GSM)

• Syntax error (vmx-line 146) - VM does not start!

  Hi all

  I just installed the updated Mac OS security and after that I turned on the printer on the Fusion side Mac OS fixed. Now VMware does not start, and I get the following message

  File "/ users/Pedram/Documents/Virtual Machines.localized / 2.vmwarevm/Windows Vista 2.vmx Vista Windows" line 146: syntax error.

  It seems that the .vmx file is corrupted, as it has just 146 lines.

  I use a software that only runs on a PC and I have all my data stored on the windows side.  It is essential that I have access data, please help me.   I worked on this project for a 1 month and losing the data is equivalent to losing my job.

  Any help will be greatly appreciated. Thank you

  Try the attachment. Note that the .vmx file has been truncated in the Middle the AutoProtect settings, so I got rid of all of them - you should reactivate the merge user interface.

  Alternatively, if you could get vmware*.log for the virtual machine, we could try to rebuild the original .vmx file (there may be more pieces of interest who got truncated).

  Also note that if you use the Fusion 2.x, you can access the virtual OS x disk when the virtual machine is not running. CTRL-click on the VM and choose open with > VMDKMounter.