DCOM problem without an answer - please help
I keep searching for an answer to an error in the event viewer I meet. Here is this error:
Event type: error
Event Source: DCOM
Event category: no
Event ID: 10016
Date: 14/04/2011
Time: 08:11:34
User: Authority NT\SERVICE network
Computer: LEARNING-ADF6F864
Description:
The application-specific permission settings do not local Activation permission for the COM with the CLSID server application
{5F36DC27-B076-4D0C-BD8C-7AEE14022193}
the user NT AUTHORITY\NETWORK SERVICE SID (x-x-x). This security permission can be modified using the Component Services administrative tool.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I have read the information in the Help and Support Center Microsoft - but these instructions are not clear to me. Here are the instructions:
To assign permissions
- Using Regedit, navigate to the following registry value
HKCR\Clsid\clsid value\localserver32
The clsid value is the information displayed in the message. - In the right pane, double-click default. Appears in the dialog box change the channels . Leave this dialog box open.
- Click Startand then click Control Panel.
- Double-click Administrative Tools, and then double-click Component Services.
- In the Component Services snap-in, expand computers, expand my computer, and double-click DCOM Configuration.
- In the right pane, locate the program by using its friendly name.
- Right click on the program name and select Properties.
- Under the tab Security , in the launch and activation permissions group box, select Customize, and then click change.
Add the user to the list of permissions and give the user the appropriate permissions.
I do very well until I get to number six on this list - I don't know what is the friendly name.
QUESTION 1 - How can I identify the friendly name in this case?
When I "add the user to the permission list" I guess I'll add 'LEARNING-ADF6F864' to this list. There is only one user on this computer and it's me.
QUESTION 2 - is - LEARNING - ADF6F864 the correct entry here?
My operating system is Windows XP SP3.
Learning
Hello
Your question would be better asked on the TechNet forum, please post your request here
TechNet Forum
http://social.technet.Microsoft.com/forums/en-us/categories
Tags: Windows
Similar Questions
-
I'm using Dreamweaver CC and tries to install Dw CC (2014) at the first trial, but the problem come when it expired, both my installed dreamweaver has expired, and now I just enjoy the Bill every month without the product, please help me.
You have more than one Adobe ID and password - for creative cloud and the other for your trial period?
Nancy O.
-
weird problem with new screen, please help
Hello people,
I hope someone can help. I am using windows 7 Home premium and I hope it is a simple solution that someone has met before. It's just that I don't know how to describe it so can't type into google to find an answer.
This happens in all programs, Firefox, ms word Opera, basically any window I opened. The bar menu at the top of the screen is a transparent white color and everything works well, but after 50 or 60 seconds, it turns into a transparent, I can still read the Word editing, display etc. file. This is where the scroll wheel on the mouse and what I'm typing stops working. When I type something with the mounted volume, all I hear is a single beep whenever I tap on a button, but nothing is actually typed. Now, all I have to do is click anywhere in the window and it works again, but only for 50-60 seconds. I had to click on the screen twice since I started typing this because when I look at the screen, everything I typed is not there because the menu bar's transparent again while I was typing. Its driving me crazy.
I don't remember what is a problem before, if it was I would have surely noticed. The only thing that has changed is I had been using my 32 LCD TV as a screen for a long time, but I moved and did not bring my TV with me, so I use the PC came with the computer screen. It's a PC I bought my sister a few years ago so I never used the PC screen that comes with it so don't know if it happened when she or what, she has, she can remember either. I have a updated driver, did not work. Changes the settings in customize and cannot do it helped either.
Monitor: monitor LCD Compaq CQ1859
Do I something pressed or clicked on something by accident?
Is there a setting some part that I forgot?
I plan to cast the spell by the window, its really annoying.
Please help guys and ladies.
Hello salamander.
Please contact Microsoft Community.
I can understand the inconvenience caused, be assured that we are here to help with your concern.
- What is the model of the computer and do ?
- Do you see an error message when the menu bar is transparent?
Please follow the link below and include a screenshot in your post,
I suggest you follow the methods below to see if it helps.
Method 1:
Clean boot: to help troubleshoot error messages and other issues, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.
http://support.Microsoft.com/kb/929135
Important: please go through the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.
Note: If the problem persists, continue with method 2
Method 2:
Check the problem by disabling the Aero transparency feature. Please follow the steps below to disable the Aero transparency feature.
- Right-click on a vacuum of space on the desktop and click on personalize.
- Click on the link to the color of the window at the bottom of the window.
- Uncheck the check box enable transparency to disable transparency and check the issue.
For more information, aero feature please refer to the link below.
http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Aero-desktop-experience
Note: If the problem persists, continue with method 3
Method 3:
A Malware - scanner The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software. Please follow the steps below to use the scan to Microsoft Security.
- Run the scanner from Microsoft from the link below:
http://www.Microsoft.com/security/scanner/en-us/default.aspx
- Click on download now and click Run.
- Choose complete system scan and wait for the full analysis.
Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
The above information was hoping to get useful, please return it to us if you need additional assistance.
-
BEX / BEX64 problem event name. PLEASE HELP ME...
I had this problem for the last two weeks and the same message appears ".exe has stopped working". Windows cannot open my MW2 single player or multiplayer file, The Witcher 3 Wild Hunt or GTA 5. He started only with MW2 and then more games like GTA and The Witcher has stopped working over time. The Witcher and put GTA BEX64 developed. I read solutions online including DEP (prevention of data mining) troubleshooting, assessories - command prompt, check all the drivers updated, game compatibility, etc. Who fail to solve the problem. Please help me as soon as POSSIBLE!
BTW, I know these games work first hand I played all these games above all of a sudden no longer responds.
Modern Warfare 2
Problem event name: BEX
Application name: iw4mp.exe
Application version: 0.0.0.0
Application timestamp: 55d37e9e
Fault Module name: StackHash_4c0d
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 80000008
Exception code: c0000005
Exception data: 00000008
OS version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional information 1: 4c0d
More information 2: 4c0d4d78887f76d971d5d00f1f20a433
3 more information: 4c0d
Additional information 4: 4c0d4d78887f76d971d5d00f1f20a433The Witcher 3 Wild Hunt
Problem event name: BEX64
Application name: witcher3.exe
Application version: 3.0.7.2515
Application timestamp: 56995fe3
Fault Module name: StackHash_0584
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 000007fefbbb3d20
Exception code: c0000005
Data of the exception: 0000000000000008
OS version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Information additional 1:0584
More information 2: 05844721ba6f46935da4f741075b96d8
Additional information 3: cfd7
Additional information 4: cfd727e056ffff4bf82e32abe5e4efc5GTA 5
Problem event name: BEX64
Application name: GTA5.exe
Application version: 1.0.678.1
Application timestamp: 56e2b38c
Fault Module name: StackHash_0584
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 000007fefbbb3d20
Exception code: c0000005
Data of the exception: 0000000000000008
OS version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Information additional 1:0584
More information 2: 05844721ba6f46935da4f741075b96d8
Additional information 3: cfd7
Additional information 4: cfd727e056ffff4bf82e32abe5e4efc5System specs
Windows 7 64 bit
i5 4690 K
GTX 980 4 GB
ASRock Z97 Extreme 4
Samsung 500GB SSD
3 TB hard drive
PSU Corsair 850 RM
Corsair 16 GB of Ram
Thank you
Cody Carroll
The Module 'fault' is not positively identified as:
Fault Module name: StackHash_4c0d
Fault Module version: 0.0.0.0It can help to see al the modules that are loaded in a collision.
You can download and run the following application (AppCrashView):
http://www.NirSoft.NET/utils/app_crash_view.html
Click on one of the recent errors GTA5.exe.
Can you copy and paste the information that appears in the lower window that loaded modules.
Do the same for a mistake witcher3.exe and iw4mp.exe.
-
Hello I am new to blackberry support Community Forum, and I would like to ask you a few questions... If anyone has answers please answer...
My problem is the following... I bought my BlackBerry smart phone about 3 months ago and the problem is that sand time appears on my screen very often, so my battery is consumed very quickly and my emails do not reach my camera but after days and sometimes my bolcks phone... so as you can see it there are several problems... From time to time my unit will return to normal... and I don't know why... .i guess that's something I'd do, that you have no answer to what I need to do please answer...
Thanks in advance
Vasoulini
Ok. Or maybe try to see if there is a version more to day to install.
-
Hello...
I really need a help that expert on black berry 9810. I am a new blackberry user by the way. So now the problem is...
I can't configure my phone because it always came to ask me upgrade my data plan. In addition to this, sound out always asking me to connect to the network while my phone is connected to the network.
Please help thanks me...!
Hello ccarthine
Welcome to the Forums of the BlackBerry Support
We need BlackBerry data Plan to access most application on our Mobile network / BIS our carrier, a normal data plan will not provide you these features.
Then, contact your carrier or Wireless service provider to find out if your account is configured with the BIS.
-
Big problem blackBerry Smartphones! Please help me.
I work with my bb bold 9700, I want to make the video, and then my bb shut down! When I put my battery and reset on my bb light only red light about 20 seconds and then nothing, it's always turns off. I can't turn on my bb! 20 sec red light does not blink and after my bb turn. Please help me? do you know what is a problem?
First, try it this way...
With the BlackBerry device under voltage, remove the battery for about five minutes, and then reinsert the battery to restart.
-
Everytime I open my site I get this error "MuseJSAssert: Errot calling function selection: TypeError: cannot get the"init"reference to undefined property or null" and I was a newbie am not able to solve this problem.
I did take all measures please help.
Hello
Can try you it on another browser that the problem does not come up on top of our end.?
Kind regards
Akshay
-
I have a problem in my project, please help
my project does not work correctly I do not know why .when photo supposed to be shown that he stopped .so I tied to show u what I mean so please help me to know what the problem.
Hello
Your problem is common. You are not understanding how everything fit together and interact in Captivate.
You insert a button on this slide. Buttons playback normally until they were clicked by the user.
Click on the image below to enlarge if necessary.
See you soon... Rick
Useful and practical links
Captivate wish form/Bug report form
-
BlackBerry smartphones restart problem... Please help
can someone tell me please how to restart my curve 8520?
I have app updates, but cannot enter into my world of app until I have to reboot the device.
He told me to hold down the power button, but all that is to disable the fone.
can someone please help me because on my screen saying that I've updated knowing that I can not update the icon thing makes me want to throw the phone on the wall
Thank you!!!
fufuH wrote:
makes me want to throw the phone on the wall
Well, that might restart the device for once and for all!
Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.
You can also press ALT + rightSHIFT + delete all three at the same time, to initiate a reboot.
You will find thousands of messages here in the forum describing how this reboot is done.
Good luck.
-
Problem with clips nested, please help!
Help, please!
I have a movieclip symbol, let's say, a ball that bounces with a stop(); action on frame 14.
And I have another movieclip symbol which has a text that cross the screen with a stop(); action on the frame of 10.
The main time line, I would like to that ball to start bouncing on frame 2 and stop frame 15, so I placed it on its own layer with a keyframe on frame 2.
I want, the symbol of the text to start on frame 6 and stop on frame 15 also, so I placed it on its own layer with a keyframe on frame 6.
It does not work.
When I play it back, the Visual jump wildly back and forth between the symbols.
What should I do?
I work in Adobe Flash CS3. ActionScript 3.0, 30 frames per second, Player 9 (not sure if this is relevant, but just in case).
Please help me, I'm desperate, I can't understand it.
Thank you!Hello
I'm so clear with what you're saying...
You have a movieclip that has its own animation of scenario of a bouncing ball and it stop on chassis 14? Even with text movieclip - he has his own animation of script for simple horizontal interpolation that ends on the frame of 10?
And you placed these clips on the stage, put them on their own layers and moved the mc of ball to frame 2 and the text in the box 6 mc?Are there blank keyframes before the frame 2 on image 6 of the text layer and layer of ball? If not, then select frame 1 layer on the ball and press F7 to make an empty keyframe. Do the same on the text layer but select images 1-5 and click F7 to make them blank keyframes.
What you don't want to do, is show the movieclip before the beginning of their animation. Therefore, you get the wild flashing.Also extended these layers to frame of 15 images? Otherwise, click on frame 15 (for the two layers) and press F5 to add frames.
And you order stop() on plot of 15? Otherwise, create a new layer, call it actions and put a stop() on frame 15 command.
Sure that your movie will play correctly now.
NOTE: Just out of curiosity - why don't simply animate you everything on the main timeline?
-
Problems Vista start up, please help out if you can
I have a HP Pavilion dv4, vista 64 bit home
It is only a month
This problem came out not the case, I stop the machine from the menu start normally
the next morning I started it upwards to get a box of "Startup Repair" pop up on the screen right away and he said "research issues", then another box pops up saying "Startup Repair cannot repair this computer automatically, sending more information can help microsoft create solutions", then he gives me the choice to send information or not so I clicked Yes to send information about this problem, so it has a box that says "Windows cannot repair this computer automatically and it gives me the possibility to each veiw diagnostic and repair details or view advanced options for system recovery and support, I tried to do a system restore to an earlier date, but he let me only to restore my 'Sytem C»» ":" drive my "Recovery D:" and my "Boot X:" both say "this disc is not in the selected restore point" someone tried to help me find the problem but not lucky I'm able to open a command prompt, if that helps in any way, im in no hurry to fix it because I don't need the computer immediately , but he was sensitive on this subject files that I am really upset if were lost, although I doubt that something wrong with the c: drive it seems that something is wrong with the boot drive, but that's why im here, if the experts can help you as soon as possible it would be greatly appreciated.Hello danielingalt89,
Thank you for visiting the website of Microsoft Windows Vista Community.
Try the rest of the stage in this article:
System restore points are created automatically when the following occur:
- When you install a new application or driver.
- When you uninstall or install some programs.
- When you install new updates
- Automatically on a daily interval
- Manually by creating a.
- If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.
So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.
Restore Windows Vista to a previous state
In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.
If you can connect to Windows Vista, you must follow these steps.
- Close and save any documents that you have opened.
- Click the Start button to open your Start Menu. The Start button looks like this:
- When the Start Menu open click on the menu option all programs.
- Click once on the Start Menu Accessories group.
- Click once on the System Tools Start Menu group.
- Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.
You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.
1 screen of system restore
By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.
2. the list of available restore points
You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.
3. confirm the selected restore point
If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.
4. second Confirmation
If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.
5. restoration of a restore point
When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.
6. system restore was successful
If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.
7 undo the last system restore
Your computer should now work correctly again.
With the help of the restoration of the system in the Windows recovery environment
Manual creation of Restore Points
As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and want to save the State in case of problems in the future. To create a manual restore point, you must follow these steps:
- Click the Start button to open your Start Menu. The Start button looks like this:
- Click on the control panel menu option.
- Click the option menu system and Maintenance.
- Click on the system menu option.
- Click on the System Protection in the list on the left.
You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.
8. the System Protection tab
To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.
9. Enter the manual restore point title
Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.
10. Manual restore point has been created
Now that you have finished doing the manual restore point, you can close the system window.
Have you tried to make the clean boot before installing this update. There could be interference or a program context prevents the installation of this update. If you have please ignore this information.
Clean boot
We will also test in a clean boot environment to see if this issue is related to interference from other services / programs:
1. click on start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click on continue.)
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7 log on to your account.
---------------------------------------------------
Click on start-> all programs-> Windows Update and reinstall the update you mentioned previously.
---------------------------------------------------
To restore your Normal startup:
1. click on start, type msconfig in the search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click on continue.)
2. in the general tab, click Normal startup.
3. When prompted, click on restart.This should solve your problem.
Let us know if these steps solve your problem. I hope the information is useful.
Kind regards
Anthony
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have several e-mail accounts, which is my original yahoo account that I used to almostt 2 years. (* E-mail address is removed from the privacy *) I did experiments to access this account with all my problems of very important Business inside. The problem is that this account always wonder an old security question, for which I don't have the right answer for access. If I ask too many times, I will be locked for 24 hours. I tried to link my account 'Facebook' for this particular Yahoo account, but my 'LENOVO' Lap Top computer with the Windows 7 operating system continues to send me an "Error Message". The Yahoo application question is - where I spend my honeymoon? It's not like I don't know where my wife and I where for our honeymoon wedding 8 years-although that every answer I entered appears to be incorrect. I don't remember what my specific Yahoo answer - that is looking for.
Please can someone help me with this issue tonight here in France?
Sincerely,
Robert T.
Best regards
Wow, this is the longest hyperlink that I've ever seen :)
-
Pavilion g6 1311-eq: driver problem... Please help me!
Hello.. Help, please... I put t have solutions . I have a problem with the video card driver. I tried to do an update to the current version comes from 2011. When I try to install the drivers from this site... exactly from here ... http://support.hp.com/us-en/drivers/selfservice/hp-pavilion-g6-1300-notebook-pc-series/5186808/model ... whose work... It gives me an error like: instalation of failure... Please... I want to update because my games don't work well with the current version of driver.what can do?
I tried to install the 15.7.1 version of the driver but it show me 7400 series in Device Manager... 7450 not... and does not workgiulesteanul
Download the latest driver intel HD
First uninstall all the driver AMD
reset
Uninstall Intel HD
Reset
Install the new Intel HD
reset
Install the AMD driver
Reset
-
2360ee dv3 problems... Please help!
Hello! I use a 2360ee dv3, and I have several problems with it,
1 -http://h30434.www3.hp.com/t5/Notebook-Hardware-e-g-Windows-8/hp-dv3-2360ee-overheating-every-hour-or... (I made another thread, but no body has responded, also I forgot other problems)
2. because you people forgot to add in support of NX switch in the bios (I install a new one and it's same thing) I had to clean-install win 8 and which lead to all my drivers, services premium (including their serial code) should be deleted (but that's my problem...) anyway, I have not found all the drivers on the Web site! and now switch capable graphics are not running and is so as well the "ati radeon 4300/4500" and the "Intel integrated graphics i3" to run at the same time, creating a screen (laptop) and a virtual screen, causing a lot of things work on the other screen and just because it is already running and it is better to the screen of my laptop on the ati card now when I try to set only, second screen using Fn + f4 screen resolution setting did not work and Yes, infact the Intel card takes him not on the first screen while the ati is the second and the laptop screen is located on the second, now the problem is, definition of the screen for duplicate or second screen will only cause me a long process of trying to make it work again , and when I'm finally wins, if I sleep the laptop, stop, suspend extended or even close the lead, still working on the Intel card boom causing me problems and to cite, I installed the latest drivers from the amd website, I don't want the card Intel running at all, because if you go on the link located at no. 1 I did not describe , but it is the processor that is over heating and I believe that the processor is an apu with a graphic map of the week, and that could add a little heat, also the heat problem I installed pirriform speccy on my father's computer too (also 2360ee dv3 and fun is done: he bought his two years in front of me) and his stuff work at about 50-50-55-40 (card mother-CPU-gpu-hdd) and while typing this , mine are 78-76 - 79--(n'apparaissant ne pas)!
3 - the battery shows "plugged in, not charging", but is going up slowly, what is the problem?
4-i set the battery to high performance, something more than that and I'm back in the days of my old laptop ram of 1 GB acer "m celerion! I know that the setting are just for sleeping and other things but how can alter performance?
and please focus on the No. 2 most, thank you!
I could not yet test the process below, but it may be worth trying in your case. Minecraft is a set of OpenGL, so it won't use the default AMD card. See this document for more information about the systems of switchable graphics of AMD and OpenGL.
As you said, it works in "windowed mode". With this in mind, you could try the workaround suggested or leave such what because it works to a certain extent.
Maybe you are looking for
-
Mini Mac fails to turn off after the upgrade to El Capitan
Hello Yesterday, I upgraded to El Capitan, unfortunately, the Mac mini does not stop and Finder is unresponsive, I am at a loss and do not know what action to take, any help would be much appreciated. Thank you rachealfromva
-
Satellite L450D - 11 X, battery plugged in but not supported.
My Satellite L450D - 11 X (fairly new) is plugged in, but the battery won't charge and the battery light is orange. Life flows or increases when using it plugged. I tried updating the BIOS but don't know if I did this correctly. Thanks for any help i
-
Keyboard led to settings on Qosmio X 70
Hi guys and girlsJust got a new TOSHIBA Qosmio X 70. Is it possible to make the keyboard back light stay up? Thank you very muchLee
-
When trying to get windows media player to watch records, going "file > add to library > advanced options > add" WMP responds in any way and when I reopen it add it to the dialogue of the library, the files I've selected are no longer in the box. App
-
Every day between someone with a different hotmail account contact me saying that I lose my access to msn if I do not respect and send them a list of personal information, I'm not sure that this is not the work of a pirate! So I'm not comply. Should