Pavilion g6 1311-eq: driver problem... Please help me!

Similar Questions

• Hi people I have some hard drive problems, please help :)

  Hi guys, I just bought a Sata HDD internal 2 TB, but I do not see it in 'my computer', but when I go to computer management I see, I tried to do something with it, but an error pops up, I treid deleting and creating a new partition, but just before the end, I get this error : "The operation failed to complete because the disk management console view is not updated.  Refresh the view by using the refresh task.  If the problem persists close the disk management console, then restart disk management or restart the computer. "Please help. TNX

  Did you try to restart and try again as he proposed?  Assuming that you I had two ideas.  First of all, if your system is not aware of Windows updates, I would now.  Secondly, I have had good success called Easeus Partition Master that you can download from http://easeus.com .  I see they have a page for a free version 9.1 for users running the environments of 32 and 64 bit to http://www.partition-tool.com/personal.htm .

  I hope this helps.  Good luck.

• Pavilion dv4 1301TX driver problems, please help

  Hey,.

  The touch pad at the top of the keyboard no longer works, which means that it does not, while it worked a few days after I branch there.
  I guess it has to do with the new vista I installed and any other software. I tried to find the driver or it but failed.

  The touchpad, to which I'm referring is the bar where the button On / Off is included. The Media Smart, Volume, Stop/Play and wireless buttons are on this bar.

  Fortunately we can someone help me out here.

  Thanks in advance

  It is the HP Quick Launch buttons

  I noticed, that the software was not displayed in your template page.

• Pavilion 15-N240ee: Wifi driver problem

  Hello

  When I close the lib (plugged), wifi turned off and my download stops

  all power saving settings is disable and lib is the 'status quo' (connected)

  I think that this problem is a bug in the driver

  Please help me

  Hi @MA88,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 15 - n240ee and issues with the power settings when the lid is closed. Here is a linkthat shows you how to activate the away mode. It allows your computer to continue tasks, such as recording TV shows or sharing of videos and music, even if you're away from the computer. Specifically, when the computer is in Away mode.

  Please let me know how it goes.
  
  Thank you.

• my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?

• my windows vista computer is to download a lot of updates which will create the lack of disk space in my hard C drive? Please help...

  my windows vista computer is to download a lot of updates which will create the lack of disk space in my hard C drive? Please help...

  You already have disk cleanup?

  Please use this tutorial:
  http://www.Vistax64.com/tutorials/76073-disk-cleanup.html

  The Atlantic tutorial has 2 parts:
  Step 1 to 11 is for the classic disk cleanup which will give you back some disc FEPs.
  Step 12 until the end (more), is to delete all except the most recent restore points. This will give bring you a ton of disk space.
  ATTENTION: Make sure that your computer works OK because you delete restore points.
  You have no past point to fall up to restore more new restore points are created.

• HP Pavilion 17-e020sf LAN driver problem

  Hello

  I have a problem with my HP Pavilion e020sf 17. I installed windows 7 and when I try Driver from Realtek to controller network (sp55979.exe) I get the message

  ' The RealTek network adapter/controller was not found.
  If the active deep sleep Mode please connect the cable"

  I did some research to solve this problem and I tried to remove the battery, remove the ram to reset the motherboard and put it back but nothing works.

  I discovered that in the configuration of the bios, the local network connection must be enabled. But I can't find the option in the BIOS (version F08) because I read it was in the Advanced menu settings which I did not. I tried to find a bios update to get this option but did not find a compatible with W7 and my notebook.

  Can you please help me with this problem?

  You are the very welcome, Julien.

  I don't get the thing of ethernet. The ethernet (10EC & DEV_8136) device is present, so that the driver should install.

  You have the PC connected to the AC adapter and an ethernet cable plugged into the network port?

  If this is not the case, try to install the driver like that.

  The other drivers you need are the following: install this first and then try to install the Realtek ethernet card.

  The chipset driver install drivers of motherboard (for example the smbus controller). Perhaps because the controller driver SMBus is not installed the ethernet driver cannot be installed.

  A rule is always install the driver from the chipset first.  Graphic, and then audio and reboot after each installation of single driver of the 3 above.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-111367-1

  The other pilot of the wireless card is this one.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-113862-1

• I had a "Blue screen" problem, please help me!

  Well, I don't really know the source but it happened several times already, here are the details of the error:

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini091109 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 8A90628F
  BCP3: 9CCAEDB0
  BCP4: 00000000
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1
  Information about the server: 7ec0ad43-82ec-418c-af58-c7d4e1d1d9e8

  copied and pasted this information of view problem history in Control Panel and it was the biggest mistake, what happened is that the PC I use suddenly gets a blue screen with big writings saying something like she stops by unexpected error. After rebooting, it says "Windows has recovered from unexpected shutdown" and gives me a chance to see solutions on the net, but the work does'nt. Fortunately, I don't have an error for hours, but I'm afraid it may happen again. Please help me.

  My laptop has:
  AMD Athlon processor
  1 GB of RAM
  1.60 Ghz
  ATI Radeon X 1250
  Windows Vista
  120 GB hard drive (33 GB free now)

  I think that the mistake occurred whenever I might have too many applications open, especially in the section of the status bar, that I can't do it, please help me!
  Thank you.

  Hello

  Think the drivers - do all.

  Could be a nuisance pilot. Update your drivers manually looking at system manufacturer and
  Sites of the manufacturer of the device.

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• (Win7 64 bit PC HP2000) Network problems, please help!

  Here's the problem:

  On the taskbar, it has a X on connect it to the thing, as if I turned off my WiFi.
  When I click on that, on the top it says "connections are available.
  and on the list of networks, on one I'm signed in, it says "* name *-connected network.
  In the network and sharing Center, it says that I am not connected to any network
  I'm sure that this a driver problem, but I can't find where to put up-to-date.
  In Device Manager, it's the 3 drivers I have under network adapters
  Microsoft Virtual WiFi Miniport adapt
  RALink RT5390 802.11b/g/n wireless Adapeter
  Realtek PCIe FE Family Controller
  I also can not connect my Xbox Bluetooth headset, it just does not appear on add a device when I it BT Mode and press the button connect for 2 seconds. If you could tell me all this, it would be nice :)
  Help, please!

  You get the drivers from HP support, specific to your model

• Small desktop Inspiron computer (3647) Driver Issues Please Help

  I am new to this forum n im really have a problem, I downloaded the drivers directly from the dell Web site... but there are some drivers that do not install, I looked in my device manager, it is highlighted yellow triangle three...    1 generic bluetooth adapter...  2. network controller. 3 pci simple communication controller but I can not even free wifi... could someone please help solve this problem?     Thank you

  Hi jasonm6565,

  I suggest you try to download the driver for the card wireless to another browser.

  Also, answer us with the snapshot of the Device Manager with the WAN adapter.

• Resolution / gambling problem please help me

  OK, I have vista 32 bit and when I get in any game at all and play... then get out of the wreck is fine... but then when I restart the Res changes again in the wreck the last game I played was set to and if the game does not have my native resolution it mess everything up on top of my desk and its starts to become annoying if someone could please help me because I really don't want to personalize then go to display settings and change every time that I log on... I tried to uninstall the latest software, tried to use the yahoo answers and they are not any help, MY RIG: AMD Athlon x 2 Dual Core 6000 + 3.1 Ghz, 8600 GT, 4 GB of ram, vista 32-bit , 22 inch monitor, native res: 1680 x 1050, Cyborg keyboard game... and I have IE8, any other information you need to know please ask me. Thanx

  Maniac of Vista,
  If you think that the problem started when you installed the Extreme 3D Pro stick, have you tried to uninstall it to see if the problem goes away?  Who will tell you for sure if that's the problem, you can access the web site of the manufacturer and see if they have a fix for this problem, or simply reinstall the software for the joystick could fix.

  You can also try to do a restore back before the problem occurred:
  To restore the operating system to an earlier point in time, follow these steps:
  Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  In the System Restore dialog box, click on choose a different restore point and then click Next.
  In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  Click Finish.
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Let us know if this helped, or if you need further assistance.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Help, please. Security problem please help. ___

  Another person in the apartment where I live has put its media player as an icon in my taskbar without asking. Please help me to make sure that it is impossible to do it again
  Thank you for your time and effort

  Make sure your firewall is on and Security Center Windows to check and make sure that everything is green, if there is something red or yellow then see what he wants. Make sure that you use the version of anti-virus update and update your Windows and antivirus. If you use try Wi - Fi to enable WPA2 or WEP 128, see the manual of the wireless modem.

  As AntiVirus, you can use Microsoft Security Essentials for free
  Scan with your antivirus complete and remove the threat. use of strong passwords for your Windows login, create strong passwords have look at:
  https://www.Microsoft.com/protect/fraud/passwords/checker.aspx

  Try to go to the BIOS Setup and disable the boot with CD and network and make sure you boot from the hard drive is turn on and rest are disable. (Check your BIOS manufactor to aid)

  If you are using Windows Vista Ultimate using Bitlocker

  Remember, if you choose password of Windows to the top, because if he has lost or forgotten, we cannot help you. In Windows, you can backup password.

  Remmember back up your data before password and put weekly or daily backup policy that if something is wrong you have backup (it is a good idea but a backup external hard drive). Windows Vista have already great backup feature.

• Windows 7 blue screen problems, please help me

  Hey guys, I'm using windows 7, my laptop these past two weeks have blue screen problems. When I boot my laptop, and I use internet after some cell time but I have a blue screen with MSG (Message Details: to your computer. igdpmd64.sys PAGE_FAULT_IN_NONPAGED_AREA)

  If this is the first time that you have, "

  Please help me, there are the details:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  
  

  BCCode: 50

  BCP1: FFFFF8811C177B60

  BCP2: 0000000000000000

  BCP3: FFFFF880067A5A18

  BCP4: 0000000000000005

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  
  

  C:\Windows\Minidump\042414-20155-01.dmp

  C:\Users\manjeet varsha\AppData\Local\Temp\WER-37752-0.sysdata.xml

  Read our privacy statement online:

   

  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\System32\en-US\erofflps.txt

  Here is an article describing how your problem may be related to a bad Windows Update.

  http://www.InfoWorld.com/t/Microsoft-Windows/Microsoft-pushes-another-botched-automatic-update-213802

  KB2670838 update uninstall can solve the problem for you.

• BlackBerry Smartphones BB APP WORLD v. 1.1 PROBLEM - Please HELP!

  I am a new user/owner of a BB Curve 8330. In the options screen, it said c. 4.5.0.77 (Platform 3.2.0.51). I'm not sure what these numbers correlate exactly with (operating system, software device, etc.)-pathetically.

  This morning, I tried to upgrade to the new version 1.1 BB App World. I think I can get screwed up. When I installed it, it asked me if I wanted to remove the 1.0 version, and I said 'yes '. After installation of v. 1.1 and rebooting, I tried to use the new version and I always get the following error message:

  "BlackBerry App World is had problems connecting to the server BlackBerry App World. Check your network connections, and then try again. »

  My phone is not compatible with this version? I can't understand. I was going to download the 1.0 version and reinstall, but I can't seem to be able to find this version available for download.

  Please help - I don't know what to do.

  Thank you in advance,

  TDS

  PS: by the way, I know my network connections are fine. Everything works as it should.

  Here's the answer to the question I was trying to Irdawg a Newbie CrackBerry.com:

  Model: Curve 8330

• Table and the loop problems (please help)

  Im making a site for a project where I have to include a table and a loop.
  
  For this section, I put in a "contact us / Q and A" page where the user can enter a name, email, and question.
  This information is sent to a table and then following image shows the form of the table information in the dynamic text boxes.
  
  I've included a loop to check that each part of the table contains data (name, email and the issue).
  Then I have an If Else, which clears the form either if a section has been missed, OR if the form was completely correctly it directs the user to the frame following where as I said above the details appear in dynamic text boxes.
  
  The problem im having is the loop to check For the table that's a waste. Someone can please help me out here and get the loop to verify that all fields have been filled.
  
  Here is my code for the initial frame
  
  

  You must update the values in your table at the time you press the submit button. Code follows

  There is a second example to check the strings (it's a little complicated, but it's a useful trick if you can understand). This does not leave the Send button work unless all fields have something in them