DCR service hangs up frequently

Similar Questions

• SERVICE HANG REPORT - hpqddsvc

  Currently, I have eight 8 computer home networking on my home network. Computers using Vista 32-bit, Vista 64-bit and Windows 7 Ultimate 64 bit operating systems continue to send a notification to the problems and section of the report, stating: "'hpqddscv Service Hang Report." "

  I use a printer HP all-in-one Officejet 7410 and HP Laserjet 2430tn printer range.

  All computers seem to be send the items requested to print without problem. However, as indicated in the report and the problems of the article, the above message appears repeatedly several times.

  No one knows what means this message and how fix/remove this message.

  Any help would be appreciated.

  Thank you.

  The message refers to a service called HP CUE Device Discovery Service. Lets try and stop the service and see if the error appears again.

  1. click on the start menu and click on "Run" and type "services.msc" and press the Enter key.
  2. in the Services window, locate the HP CUE Device Discovery Service and double-click it.
  3. you should see a button titled 'STOP '. Click on this button.
  4 above, you should find something that says "Startup Type" Change that on 'off '.
  5. click on the button "Apply" and close all windows.

• My iPhone hangs very frequently

  I have very frequently hangs pl help

  Have you tried the basics of manual?

  Reboot, reset, restore

• computer hangs momentarily, frequent "not responding", shuts down slowly

  Computer hangs for several seconds when clicking on shortcuts or by switching between windows.  Programs to stop responding.  Shutdown slows down considerably.  Restarting returns the system to normal for about 15 minutes.  I have cleaned the registry and have scanned for malware with no result.  I use a HP Pavilion DV6 Notebook with Windows Vista 6.0 with Service Pack 2

  Hello

  Kaspersky unfortunately seems to have joined the ranks of too bloated and causing trouble
  programs. It has been the cause or involved in a lot of questions I've seen recently here.

  Uninstall Kaspersky and run his tool of suppression and/or special instructions such as leftovers even can cause
  strange errors to occur. The following recommendations to use the test even better all the time.

  Kaspersky - removal tool
  http://support.kasperskyamericas.com/Knowledge-Base-article/1464

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  By the way I also want to run the Norton removal tool as leftovers can be hanging out
  Since you have removed the it.

  Norton Removal Tool
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Firefox has started to freeze on the opening and hangs / freezes frequently during use.

  Firefox has begun to open very slowly [very]!, as well as to crashing and freezing during use. What's happening on all my three machines, two running Win 7 and the other win 8.
  I tried refreshing and disabling, but to no avail hardware acceleration.
  Now it seems to freeze on opening and takes a minute or two to become sensitive, or not at all.
  When I look into during a freezing Task Manager, I see the Firefox process use 35 to 50% of memory [I have 8GB, 12GB, and 16GB] and up to 50% of the CPU resources.
  Everything was fine until the last two weeks.
  In addition, last month, I noticed an almost permanent error on the status bar message - ' Sync has encountered an error during synchronization: unknown error. " Synchronize automatically retrying this action. »

  
  

• Firefox hangs very frequently.

  Firefox crashes while I consult a web page, a page that has been open for a few minutes.

  You can try that before posting a new RC:
  FF 1 / restart in safe mode (Windows + R > firefox.exe - safe-mode)
  If it works, find the add-on that is guilty and turn it off.

  Hardware acceleration 2 / disabling in FF (Options > Advanced Options > general)-restart et seq. reactivate what does not help.

  3 / create a new FF profile (Windows + R > firefox.exe - P) to test

• Hanging of frequent then the use of google searches. The same research in Bing or use IE are no problem.

  Windows 7 on Dell laptop intel i5.
  I tried uninstall/install the latest version of Firefox 3.6, no change.

  Popup will appear when button clicked - back a script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends.

  Script: chrome://canitbecheaper/content/browser_wrapper.js:49

  Continue or stop repair the blow. I have not installed Chome.

  Two responses - invisiblehand uninstalled and everything seems ok now - thank you all

  I had this same problem and uninstalled the add-on Invisible hand and after that the problem disappeared... problem solved!

  Biggury

• Hang latop frequently start-up and working in the Middle

  Dear Sir/Madam,

  System not responding I tried sfc/scannow, defragmented, analysis antivirus, chkdsk, problem still own drive, battery removed, but also that it is not resolved.

  I only switch and restart

  I have very painful since the last 6moth Finally I came to your aid

  CANU help me

  HP pavilion dv1000 laptop

  Windows XPsp2 configration

  I have Formated the total hard drive and reinstalled XP, it worked thank you

• PDF file generated from Reporting SERVICES hangs when opened in Adobe reader 11 and saved as with "optimized for fast web view."

  Large pdf (over 1000 pages) generated files form SSRS crashes when opened in Adobe reader 11 and saved as with "Optimized for fast web view" activated. This saves fine with disabling this option. However, our customers are not ready to accept this solution because they do not want to change any settings. Please suggest if we should create a ticket with microsoft for SSRS allow the generation of pdf quick display of Web pages or is it an option in Adobe to fix this problem without changing the settings.

  The SSRS file has Fast Web View: 'No' and that's how Microsoft SSRS generates these files.

  Thank you for the complete maxwyss response

  As you have indicated, the PDF SSRS seems to have some elements that are quite similar to be supported for fast web view.

  We asked customers to disable the fast web view, but the customer is big enough to make a change individually on their machines and so were looking for a solution.

  I saw in several forums and a few discussions here as well as disable the fast web view option works for pdf fails.

  Which was just wondering if its known that multiple PDFs genarted by third parties may have problems with the optimization, the Save as optimized for fast web view could be disabled by default installation of acrobat reader rather than be enabled by default

  Thanks again for the reply!

  PS: links indicating similar problems

  https://forums.Adobe.com/message/7965091#7965091

  https://forums.Adobe.com/thread/1456971

  How to fix Adobe Acrobat "save under" error - Digital Factory tool blog

  https://social.msdn.Microsoft.com/forums/SQLServer/en-us/63cf1325-2054-4ef1-9c5d-631da6a30 cfc/file-size-of-exported-pdfs? Forum = sqlreportingservices

• Hang WdiService host service

  After several more questions... maybe associated with may not.  I now have a list of errors from the WDIService host.

  And here's one:

  Product

  WdiServiceHost

  Problem

  Service Hang Report

  Date

  30/01/2014-10:26

  Product

  WdiServiceHost

  Problem

  Signature of the problem

  Problem Envent name: SerivceHang

  Service name: WdiSericeHost

  Image name: 6.0.6001.18000

  Type of service: 20

  Startup type: 2

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 1033

  A way to solve this problem?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often
  easy to detect malicious software often comes with a much harder to detect and remove the
  payload. So its best to be now too thorough than paying the high price later. Check
  with an extreme overdose point and then run the cleaning only when you are very
  that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap you start, however, you should
  also run in regular Windows when you can.

  Download malwarebytes and scan with it, run MRT and online scanners.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
  files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  =======================================

  For extreme cases:

  What is Windows Defender in offline mode?
  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  System requirements Windows Defender in offline mode
  http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-system-requirements

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Synaptic touchpad hangs

  Hello

  I have a hp pavilion dv6, which is only 5 months old.i am facing problem like the touchpad hangs very frequently.when I move the cursor, it is moving, but tapping it does not respond.can someone help pls? I'm now outside the India, so cannot take it to the service center.

  Thank you

  Rose-Marie

  Hello

  Try the following.

  First, download the latest installer driver Synaptics, on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56168.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this is finished, stop the laptop.

  Disconnect external devices, then unplug the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• Host WdiService and WdiSystem hanging on startup

  Hello

  info from the view all problem reports

  (1) block of service host (x 38) 10/17/2011 - 13/04/2012 bucket id: 649591368

  (2) blocking of the host system (x 10) 31/10/2011 - 12/04/2012 bucket id: 649756031

  not daily but that happened during this period. does not affect the functionality of my computer (Windows7 starter)... but technically?

  Thank you

  Hello

  WdiSystemHost and WdiServiceSost services are part of the operating system of self-healing framework - messages "Checking for a solution to the problem." Windows 7 shows when she tried to correct automatically is something from the work done by these two services.
  Messages of 'Service Hang Report' that you see do not technically describe a crash. Instead, the service control manager has decided that something has gone wrong in the services of Wdi.
   
   
  I suggest that you try SFC and see if that helps.
   
   
  SFC scanner. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.
  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833

• Windows service crashes with failing module NTDLL. DLL

  I have a Windows service (Controller.exe) written in .NET 3.5 SP1, which runs on 2008 R2. The service blocks with the following entry in the event log:

  Name of the failing application: Controller.exe, version: 0.7.0.1424, time stamp: 0x50d232dc

  The failed module name: ntdll.dll, version: 6.1.7601.17514, time stamp: 0x4ce7c8f9

  Exception code: 0xc0000374

  Offset: 0x00000000000c40f2

  ID of the process failed: 0 x 2048

  Start time of application vulnerabilities: 0x01cde94e239bd028

  The failing application path: K:\Weeden\Worms\Weeden.Worms.Controller.exe

  The failed module path: C:\Windows\SYSTEM32\ntdll.dll

  Report ID: 06f96576-55a2-11e2-8097-d8d385bcce80

  There is nothing in the app logs to indicate that the application has been done nothing at the time wherever it crashed. He has done a few times before (but seldom - once every two weeks or more).

  The only entrance at the time of the error is the one where it says The Windows Error Reporting Service service entered the running state. But I suspect that it is just to log the crash.

  Can someone please advise on the issue?

  Thank you!

  Hello

  Thanks for posting your question in the Microsoft Community Forum.

  According to the information, you're faing questions about Windows Server 2008 R2, Windows Service hangs with NTDLL module failed. DLL.
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums for further assistance. . You can follow the link to your question:

  Technet Windows Server general forums

  Using the windows-related issues feel free to post on the Microsoft Community Forum.

• Windows detected your registry file is still in use for other applications or services - IIS 7 w3wp.exe

  I use a new computer with Windows 7 to run tests of endurance for a WCF application.
  I see that the w3wp.exe is discharged to 2 - 3 times a day:

  Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

  DETAIL-
  Register User 6 handles is escaped from \Registry\User\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415:
  5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \registry\user\s-1-5-82-3006700770-424185619-1745488364-794895919-4004696415-cles
  5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \registry\user\s-1-5-82-3006700770-424185619-1745488364-794895919-4004696415-cles
  5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \REGISTRY\USER\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415\Software\Microsoft\Windows NT\CurrentVersion key
  5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \REGISTRY\USER\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415\Software\Microsoft\Windows\CurrentVersion\Explorer key
  5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \REGISTRY\USER\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections key
  5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \REGISTRY\USER\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415\Control Panel\International key

  I run the tests as an administrator.
  This continuous restart of IIS prevents my run endurance tests.

  I am the only user of the administrator on this computer, no other applications running on the computer.

  I found similar questions and I tried their solutions without success.
  http://blog.Tiensivu.com/Aaron/archives/1909-OCS-2007-R2-services-hang-at-starting-on-reboot-with-Server-2008.html
  http://blogs.msdn.com/b/AsiaTech/archive/2010/08/05/load-user-profile-in-IIS-7.aspx

  Thank you.

  Hello

  If you use IIS, it would be better to post the same question in the IIS forums to get help.
  http://forums.IIS.NET/

• vSphere Profile-Driven Storage Service crashing

  Any ideas?

  vCenter runs on a box of Windows 2008 Std x 64 with 32 GB of memory and 4vCPUs. It is a virtual machine. We run vCenter version 5.5 1891313.

  We have a problem where the VMware vSphere Profile-Driven Storage service hangs. Everything started after we rebooted the server vCenter two days ago. The only change we have made to the system installed the NetApp Storage Console plugin virtual on the vCenter server. I deleted since. The event log shows "VMware vSphere service oriented storage taken end with 1 special service error service profile (0 x 1).» Any attempt to vmotion a server causes the error "a general error has occurred: invalid response code: 503 service unavailable '. VMware suggestion is to run a fix for Windows 2008 (not R2), Windows6. 0-KB950319 - x 64. It is referenced in an article KB of VMware. This fix is not applicable, as is wrapped in a service pack already applied. If I try to run wrapper.exe use the wrapper.conf for service, the output is as follows:

  Wrapper | --> Wrapper started as Console

  Wrapper | Java Service Wrapper Professional Edition 64-bit 3.4.0

  Wrapper |   Copyright (C) 1999-2010 Tanuki Software, Ltd..  All rights reserved.

  wrapper |     http://wrapper.tanukisoftware.org

  Wrapper |   Global VMware, Inc. a license for VMware vSphere Profile-Driven storage

  Wrapper |

  Wrapper | Launching a JVM...

  JVM 1 | WrapperManager: initializing...

  JVM 1 | WrapperManager: 31300 already in service Port, using the port 31301 instead.

  JVM 1 | March 10, 2015 init org.apache.catalina.core.AprLifecycleListener 13:28:53

  JVM 1 | NEWS: APR based Apache Tomcat Native library that allows optimal performance in production environments was not found on the java.library.path:... / lib

  JVM 1 | March 10, 2015 init org.apache.coyote.AbstractProtocol 13:28:53

  JVM 1 | INFO: Initializing ProtocolHandler [' bio-http - 0.0.0.0 - 8200 ']

  JVM 1 | March 10, 2015 init org.apache.coyote.AbstractProtocol 13:28:53

  JVM 1 | INFO: Initializing ProtocolHandler [' bio-http - 0.0.0.0 - 8201 "]

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.core.StandardService startInternal

  JVM 1 | INFO: Start the Tomcat service

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.core.StandardEngine startInternal

  JVM 1 | INFO: Starting the Servlet engine: VMware vFabric tc LIFE 2.8.1.RELEASE/7.0.32.B.RELEASE

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.startup.DigesterFactory register

  JVM 1 | WARNING: Could not get url for /javax/servlet/jsp/resources/jsp_2_0.xsd

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.startup.DigesterFactory register

  JVM 1 | WARNING: Could not get url for /javax/servlet/jsp/resources/jsp_2_1.xsd

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.startup.DigesterFactory register

  JVM 1 | WARNING: Could not get url for /javax/servlet/jsp/resources/jsp_2_2.xsd

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.startup.DigesterFactory register

  JVM 1 | WARNING: Could not get url for /javax/servlet/jsp/resources/web-jsptaglibrary_1_1.dtd

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.startup.DigesterFactory register

  JVM 1 | WARNING: Could not get url for /javax/servlet/jsp/resources/web-jsptaglibrary_1_2.dtd

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.startup.DigesterFactory register

  JVM 1 | WARNING: Could not get url for /javax/servlet/jsp/resources/web-jsptaglibrary_2_0.xsd

  JVM 1 | March 10, 2015 13:28:53 org.apache.catalina.startup.DigesterFactory register

  JVM 1 | WARNING: Could not get url for /javax/servlet/jsp/resources/web-jsptaglibrary_2_1.xsd

  JVM 1 | March 10, 2015 start of org.apache.coyote.AbstractProtocol 13:28:54

  JVM 1 | INFO: From ProtocolHandler [' bio-http - 0.0.0.0 - 8200 ']

  JVM 1 | March 10, 2015 start of org.apache.coyote.AbstractProtocol 13:28:54

  JVM 1 | INFO: From ProtocolHandler [' bio-http - 0.0.0.0 - 8201 "]

  JVM 1 | March 10, 2015 init org.apache.coyote.AbstractProtocol 13:28:55

  JVM 1 | INFO: Initializing ProtocolHandler [' bio-http - 0.0.0.0 - 32010 ']

  JVM 1 | March 10, 2015 init org.apache.coyote.AbstractProtocol 13:28:55

  JVM 1 | INFO: Initializing ProtocolHandler [' bio-http - 0.0.0.0 - 32100 "]

  JVM 1 | March 10, 2015 13:28:55 org.apache.catalina.core.StandardService startInternal

  JVM 1 | INFO: Start the Tomcat service

  JVM 1 | March 10, 2015 13:28:55 org.apache.catalina.core.StandardEngine startInternal

  JVM 1 | INFO: Starting the Servlet engine: VMware vFabric tc LIFE 2.8.1.RELEASE/7.0.32.B.RELEASE

  JVM 1 | March 10, 2015 start of org.apache.coyote.AbstractProtocol 13:28:55

  JVM 1 | INFO: From ProtocolHandler [' bio-http - 0.0.0.0 - 32010 ']

  JVM 1 | March 10, 2015 start of org.apache.coyote.AbstractProtocol 13:28:55

  JVM 1 | INFO: From ProtocolHandler [' bio-http - 0.0.0.0 - 32100 "]

  JVM 1 | 13:28:56 opId = ERROR - cannot save the SPS in QS:com.vmware.vim.binding.dataservice.fault.AlreadyExistsFault:

  JVM 1 |

  JVM 1 | inherited from com.vmware.vim.binding.dataservice.fault.AlreadyExistsFault

  JVM 1 | 13:28:57 opId ERROR = - Impossible to add the XML document to QS:com.vmware.vim.query.client.exception.ValidationException: got the status code: reason 400: bad request

  JVM 1 | 13:28:57 opId ERROR = - politics of Storage Service could not be initialized: com.vmware.sps.fault.PersistenceException: failure of persistence with the exception

  JVM 1 | WrapperSimpleApp:

  JVM 1 | WrapperSimpleApp: Encountered an error main running:

  JVM 1 | WrapperSimpleApp: com.vmware.sps.fault.SpsInitializedException: politics of Storage Service could not be initialized.

  JVM 1 |

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.SpsLocalService.run (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.StorageMain.main (unknown Source)

  JVM 1 | WrapperSimpleApp: at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  JVM 1 | WrapperSimpleApp: at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

  JVM 1 | WrapperSimpleApp: at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  JVM 1 | WrapperSimpleApp: at java.lang.reflect.Method.invoke (unknown Source)

  JVM 1 | WrapperSimpleApp: to org.tanukisoftware.wrapper.WrapperSimpleApp.run(WrapperSimpleApp.java:244)

  JVM 1 | WrapperSimpleApp: at java.lang.Thread.run (unknown Source)

  JVM 1 | WrapperSimpleApp: Due: com.vmware.sps.fault.PersistenceException: failure of persistence with the exception

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.qs.InventoryServiceImpl.persistEntityAsString (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.qs.InventoryServiceImpl.persistEntity (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.datastore.StorageCapabilityServiceImpl.createSystemLabelCapability (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.datastore.StorageCapabilityServiceImpl.createSystemLabelCapability (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.datastore.StorageCapabilityServiceImpl.initializeSystemCapability (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.datastore.StorageCapabilityServiceImpl.initializeService (unknown Source)

  JVM 1 | WrapperSimpleApp:... 8 more

  JVM 1 | WrapperSimpleApp: Due: com.vmware.sps.fault.QsQueryException: document adding XML to query the xDB service failed:

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.qs.SpsQsProvider.addContent (unknown Source)

  JVM 1 | WrapperSimpleApp:... 14 more

  JVM 1 | WrapperSimpleApp: Due: com.vmware.vim.query.client.exception.ValidationException: got the status code: reason 400: bad request

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.impl.ValidationHelper.validateResponseCode(ValidationHelper.java:29)

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.impl.HttpUtil.executeWithNoResponse(HttpUtil.java:65)

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.provider.impl.AtomFeedPosterImpl.postFeedImpl(AtomFeedPosterImpl.java:76)

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.provider.impl.AtomFeedPosterImpl.access$ 000 (AtomFeedPosterImpl.java:28)

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.provider.impl.AtomFeedPosterImpl$ 1.doAction(AtomFeedPosterImpl.java:44)

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.provider.impl.AtomFeedPosterImpl$ 1.doAction(AtomFeedPosterImpl.java:41)

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.impl.RetryAction.execute(RetryAction.java:33)

  JVM 1 | WrapperSimpleApp: to com.vmware.vim.query.client.provider.impl.AtomFeedPosterImpl.postFeed(AtomFeedPosterImpl.java:41)

  JVM 1 | WrapperSimpleApp: at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  JVM 1 | WrapperSimpleApp: at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

  JVM 1 | WrapperSimpleApp: at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  JVM 1 | WrapperSimpleApp: at java.lang.reflect.Method.invoke (unknown Source)

  JVM 1 | WrapperSimpleApp: to com.vmware.sps.util.impl.ServiceProxyFactory$ ProxyInvocationHandler.invokeMethod (unknown Source)

  JVM 1 | WrapperSimpleApp: to com.vmware.sps.util.impl.ServiceProxyFactory$ ProxyInvocationHandler.invokeMethod (unknown Source)

  JVM 1 | WrapperSimpleApp: to com.vmware.sps.util.impl.ServiceProxyFactory$ ProxyInvocationHandler.invoke (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.sun.proxy. $Proxy41.postFeed (unknown Source)

  JVM 1 | WrapperSimpleApp: at com.vmware.sps.qs.SpsQsProvider.createAtomFeed (unknown Source)

  JVM 1 | WrapperSimpleApp:... 15 more

  Wrapper | <-wrapper order

  Thank you. I could see this thread before I post my article. Finally, I supported on VMware to help me despite not being able to apply the patch. I was up to a high level engineer who determined that the Inventory Service database is corrupted and to rebuild. After completing this task, everything is now operational. I hope this helps anyone else who encounters this situation.