DDR3 memory (s) chip

Similar Questions

• can I mix ddr3 memory with memory ddr3 1600 1067 in my model mac end

  Hello, I have an iMac (27 inch, end 2013) which has a 8 GB 1600 MHz DDR3 memory
  I also have an old mac 24 inch late 2009 that uses 4GB 1067 MHz DDR3 memory my scan of question I put older memory in 2 empty slots of my most recent iMac? Thank you for you're time any help is greatly appreciated.

  No, you can't.

• El Capitan 10.11.3 is compatible with my operating system? a MacBook Pro (15 inch, late 2011), 2.4 GHz Intel Core i7, 4 GB DDR3 memory at 1333 MHz

  El Capitan 10.11.3 is compatible with my operating system? a MacBook Pro (15 inch, late 2011), 2.4 GHz Intel Core i7, 4 GB DDR3 memory at 1333 MHz

  Yes.

  El Capitan system requirements

  https://support.Apple.com/kb/SP728?locale=en_US

  Check the compatibility of the application

  http://roaringapps.com/apps

  How to upgrade?

  http://www.Apple.com/OSX/how-to-upgrade/

  Note:

  Computer backup before the upgrade.

  El Capitan works better with 8 GB of RAM installed.

• Re: My Satellite L500-19Z does support DDR3 memory?

  My Satellite L500-19Z does support DDR3 memory?

  In my view, it has 4 GB (2x2gb 200 pin 1.8 v DDR2 SoDimm PC2-6400) memory standard (800 MHz I think). I want to move to 8 GB and I saw the following offer: -.

  8 GB (2x4gb) 1333 Mhz PC3-10600 memory Kit.

  My laptop will support it?

  I hope someone can help.

  Concerning

  > My Satellite L500-19Z does support DDR3 memory?
  Say the user manual?
  Did you check that?

  The support of memory depends on the chipset.
  If the chipset does not support DDR3 so you cannot use it.
  The chipset is Mobile Intel GM45 Express Chipset and AFAIK that support DDR2 800 MHz 8 GB max memory chipset.

• DDR3 memory upgrade

  Where can I find the bars of DDR3 memory for desktop HP Pavilion P7 - 1126 s? The manual says I need PC3-10600 (1333 mhz) - SDRAM DDR3 unbuffered, non-ECC memory - DIMM of 64-bit, 1.5V, 240 pins - DDR3-DIMM, SO-DIMM, 16 GB max using 4 GB modules. Unable to locate any suppliers or stores that carry this type of memory ram and cannot find anything online. Any help would be appreciated. Thank you.

  Have you seen this statement or here (he supports 12800)

• EliteBook 820 g1: DDR3 memory Type unsupported

  The system has detected that a type of unsupported DDR3 memory is installed. Will you please turn off the system and remove memory DDR3 not taken in charge to avoid the instability of the system and the potential loss of dato

  Incompatible memory (2E3)

  POWER BUTTON - power off

  ENTER - continue starting

  For more information, please visit: www.hp.com/go/techcenter/startup

  Hello:

  Have you tried to install a new module of memory?

  If so, you probably have a memory DDR3 1.5 volts.

  You must ensure that the memory you put in this machine is DDR3L (1.35 volts).

• How can you tell that your T400 has installed a DDR3 memory card?

  Hello world

  I got my T400 off ebay last week, and I do not know if my T400 has installed because I had this T400 (2767bk1) DDR3 memory for $800 and it seems new, but in an open package. I'm here to ask for your help, maybe there is a software that can perform a test to determine the type of installed memory card. Please let me know if there is a solution, thank you.

  skareb

  Welcome to the forum!

  the T400 can accept as DDR3 modules.   no other module does physically fit in the slot.

• OptiPlex 960 - can he use DDR3 memory?

  I recently bought a lease Optiplex Dell 960MT.  It came with 2 GB memory DDR2, I need to increase.  I can get 8 GB of DDR3 for the same price as the 4 GB of DDR2 memory DDR2 prices are much higher than for DDR3 RAM.  According to the service manual Dell Optiplex 96, in 960 Opti chipset is 'Chipset Intel Q45 Express w/ICH10DO' http://www.dell.com/downloads/global/products/optix/en/desktop-optiplex-960-technical-guidebook-en.pdf . According to the specifications of Intel for the 960 Opti chipset, it can use DDR3 memory http://ark.intel.com/products/36527/82Q45-Graphics-and-Memory-Controller-Hub.  So, I found a few retailers who sell a refurbed Opti 960 which, claim, have the DDR3 memory in them http://www.amazon.com/Dell-Professional-Professionally-Refurbished-Refurbisher/dp/B0057GPUXE.  So is the Optiplex 960 able to use DDR3 and, if it is, what specs?

  OracleOfDelphi

  N °

  Fails in a DDR2 DDR3 slot.

  If the two are the exact same length and the number of pins, they have a different architecture.

  Also the "notch" on the cylinder is in a different location, so you can't physically put DDR2 ram in one slot of DDR3, or vice versa.

  Bev.

• AMD Radeon HD 8570 (2 GB dedicated DDR3 memory) dual monitor does not

  After the 8.1 window, I tried to install 2 monitors.  Only works.

  I have a HP Pavillion 100 with AMD Radeon HD 8570 (2 GB dedicated DDR3 memory).

  The HDMI or DVI connection works separately but not together.

  I tried both monitors before the 8.1 update, so I don't know if it of a problem 8.1 or not. Any help would be appreciated.

  Hello Asten,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more. I read your post about how it is a problem using two monitors on your computer, and I would be happy to guide you to a resolution! To start, I have to ask you a few questions:

  • What is product and model number from your desktop?
  • Are all of your updates HP completed the Wizard help HP for your graphics card?
  • What game you play it is you give this problem?
  • Has your computer finished all his important updates from Windows?
  • What is a current or recent problem?
  • Have you tried using different DVI and HDMI cables?
  • You upgrade your operating system Windows 7 or Windows 8?

  In the meantime, I recommend that you follow this document to using twoor more monitors with a computer (Windows 8). This helps ensure the monitors are connected and correctly configured for your computer.

  Please re-post with the results of your troubleshooting, as well as the information requested above. I look forward to your reply!

  Concerning

• DDR3 Memory on XP Confusion

  I read the threads on this forum on the problems of upgrades memory ignoring 32 bit os on the T-400.  I had added the expensive new 4 GB of DDR3 memory in a memory port, with a stock of additional port with 1 GB of memory - what is 5 GB of physical memory total after the upgrade. Discussions of the forum I read confused me after the upgrade, so I called support to clarify my doubts as to whether my XP 32 bit system was in fact even using new expensive memory.

  The question of support: fact the computer recognizes and uses memory f it is not displayed by the system XP? The short answer is Yes. The explanation was that os XP cannot display the memory beyond a certain level, but it uses all of the memory of ments. The explanation now means that the only way to see the memory XP reboot and press the F1 key to enter the bios, where the evidence of the newly installed memory is presented. After reading the posts on the forum, I wanted to request a refund on the memory, due to the high expense of DDR3, which seemed to have ignored the computer. I'm not entirely convinced that the memory is used, given that I continued to have problems with its collapse, perhaps due to a lack of memory (it made me make the RAM to buy). I trust support on my query response, since I am not notified relative to the testing of the evidence.

  Well, I got an RMA number to return memory and had to settle on a 2 GB memory upgrade - to 3 GB. There should be some indication of memory compatibility issues, BEFORE the purchase is made. We are not all software engineers! When I ordered the memory on the Lenovo site, there is no mention of a conflict.

  With respect to performance, I wanted the power of extra memory to edit movies, create graphics and make renderings 3d-all of which use a lot of memory. I was just told that for the money I spent on the computer ($2600 memory upgrade) that I could buy a top-of-range models W500. Of course, the return period had already expired! Lenovo give me a refund on the upgrade memory useless however. I only wish I had known about the W500, before buying the T400. It's boring to say the least.

• Toshiba NB505-N500BL - DDR2 or DDR3 memory

  I just bought a NB505-N500BL.
  I checked the label of netbook, and it doesn't have a D3.

  The module of memory installed is a Hynix 1 gb 2Rx16 PC2 - 6400 S-666-12.
  What is DDR2 or DDR3.

  The guy at Best Buy told me to replace it with DDR3, but they had not at that time here.
  I read that some come with DDR3 others not and I want to make sure that I get good memory.

  Hello

  Hynix 1 gb 2Rx16 PC2 - 6400 S-666-12 is the DDR2 module.

  But as far as I know this laptop supports a single memory so you will need to take the old module and will need to insert another module.
  But I put t see no big reasons to replace the memory.

  OK, if you want to upgrade the memory up to 2 GB of RAM, so it would be to buy modules such as:
  Toshiba 2GB PC2 - 6400 DDR2 - 800 MHz Module
  Kingston KTT800D2 / 2G 2GB 800 MHz Module

  Here is a piece of hardware specifications:
  http://cdgenp01.CSD.Toshiba.com/content/product/pdf_files/detailed_specs/toshiba_miniNB505-N500BL.PDF

  This could also be useful:
  http://forums.Toshiba.com/T5/mini-notebooks-NB-series/Nb505-N500BL-RAM-module-compatibility/m-p/186132/message-UID/186132#U186132

• Satellite L550 - 11K - support DDR3 memory?

  My 4 GB DDR2 memory. My motherboard supports DDR3?

  Can my speed of DDR2 800 MHz, I switch to 1 066 Mhz?

  Hello

  I checked the Toshiba page about the details of the Satellite L550 - 11 K and it seems that there is only support for DDR2 800 MHz modules.

  Unfortunately, the DDR3 modules won't work.

• The best upgrade for a HP g7-1150us laptop ddr3 memory? b

  I recently got a HP laptop g7-1150us with 4 GB of ram.  I intend to upgrade the ram by adding another module of ram of 4 GB.  What is the best?  What is the laptop double channel capable?  I can't find anywhere what ram of 4 GB module comes stock?

  Experience of entry would be welcome... Thank you.

  This model has only 2 memory slots, has most likely 2x2gb modules installed and yes it is dual channel.

  It uses ram DDR3 10600 (1333 mhz)

  I would buy a 8 GB kit (2x4gb modules) this is the maximum memory that can be installed in your model

  I tend to buy the memory of mark which is on sale at Fry's electronics, I look at the ads for sales, but I have a shop near by, you can not.

  http://frys.com/ads

  .

  Last mark I bought for this type of memory was g.Skill, works very well in both my HP laptops, looks like Newegg has a good price on it and free shipping.

  http://www.Newegg.com/product/product.aspx?item=N82E16820231295

  .

• HP ENVY Notebook m6-1105dx: question to DDR3L DDR3 memory upgrade

  I have a laptop of HP ENVY m6-1105dx.

  I would like to upgrade from 1.5V to DDR3L 1.35v DDR3.

  Is this possible without damage to my laptop?

  Thank you

  Joan

  The upgrades only to memory that can be made to your laptop is installation of memory modules that are guaranteed compatible by a manufacturer of memory.

  Your laptop is not like a mother gaming for a desktop computer. You are limited to the settings "protect me from myself" available in your BIOS. You cannot change the tension of memory to allow the motherboard to accept other modules of memory. Installation of memory with others that the specifications published by HP or other than guaranteed compatible memory modules will probably reward you with no experience to have fun a non laptop startup.

  That said, I recommend you do a search on google for HP ENVY m6-1105dx memory upgrade. Stick with well-known brands to avoid surprises.

• RAM 2 GB DDR2 to 8 GB of DDR3 memory

  I have a Compaq Presario CQ62-235SA comes with 2 GB of DDR2 RAM. I want to upgrade the RAM and did some internet research via the HP Web site.  I downloaded the technique and the notebook repair CQ62 where it suggests the laptop can support up to 8 GB of RAM DDR3 (see photo).

  

  But elsewhere on the HP site speak it only supports up to 4 GB of DDR2 RAM.  (http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c02253963).

  Please can you tell what is possible, I want to update to what is possible, but don't want to buy I can not use the RAM!

  Dear customer,

  Your device will be supported up to 4 GB memory DDR2. Please see the document below:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c02253963

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the white button on the right to say thank you Thumbs Up *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP