Deactivate the filter driver Cisco AnyConnect Network Access Manager
I hope that it is the community just to post this in.
I was wondering if it is possible to script disable the "Cisco AnyConnect Network Access Manager filter driver" for a LAN connection?
By comparison to the registry before and after it is manually turned off via Control Panel control-> network and Internet-> network-> connection to the Local network connections, I came with:
: remove the filter Cisco AnyConnect Network Access Manager driver
: the list of filters for the LAN adapter
reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E972-E325-11CE-BFC1-08002BE10318} \0007\Linkage /v FilterList/f
: import the Cisco AnyConnect Network Access Manager filter driver
: to the list of filters, excluding the LAN adapter
Reg import linkage - no - lan.reg
: remove the filter Cisco AnyConnect Network Access Manager driver
: the network of the LAN adapter config
reg delete HKLM\SYSTEM\CurrentControlSet\Control\Network /v /f Config
: import the Cisco AnyConnect Network Access Manager filter driver
: to the network with the exception of the LAN adapter config
Reg import network - no - lan.reg
: Remove the adapter LAN of the list of maps where the
: Cisco AnyConnect Network Access Manager filter driver is used
reg delete HKLM\SYSTEM\CurrentControlSet\services\acnamfd\Parameters\Adapters\ {77197E43-5875-469F-A3A5-A97F63A32E0A} /f
This disables 'Cisco AnyConnect Network Access Manager filter driver' to connect to the local network, but it is not automatically to my wireless connection. However, if I manually in a not checked the "Cisco AnyConnect Network Access Manager Filter Driver', the connection automatically changes my wireless.
The end result, I'm looking for must be able to use a wireless connection and at the same time be able to use the connection to the local network, when I connect directly to some work equipment to download the firmware files.
Any thoughts would be greatly appreciated.
Thank you.
Hi Paul,.
Instead of hacking the registry, you can use nvspbind.exe for this task. You can download the tool here. It will be also NAM automatically mode interfaces.
https://Gallery.technet.Microsoft.com/Hyper-V-network-VSP-bind-cf937850
Disable: nvspbind.exe /d "Wireless network connection" csco_acnamfd
activate: nvspbind.exe/e 'Wireless network connection' csco_acnamfd
Thank you.
Tags: Cisco Support
Similar Questions
-
ACS - AnyConnect 3.0.5080 Network Access Manager (NAM) by selecting the right certificate
Hello
We are authenticate our users of portable Windows7 wireless using Microsoft CA issued certificates from computer to Server v4.2 ACS Cisco successfully using EAP - TLS
However AnyConnect 3.0.5080 is installed and Network Access Manager (NAM) runs on laptops that Nam appears to be selecting details in the bad certificate for EAP - TLS authentication to the ACS server, it selects username details in a personal certificate on the computer of users that is used by LYNC 2010 and does not use the installed machine certificate.
Newspapers of ACS that indicate this is attached.
NAM will always use the details obtained from a personal certificate of feedback a computer certificate (if they both have the same domain name that they contain).
Nothing specific that I should be looking.
Thanks in advance for any help.
No problem Jim
If you could please update this thread as you progress, this will help a lot of customers in the future!
Thank you
Tarik Admani
* Please note the useful messages *. -
Unable to set server 2012 without the protocol driver LLDP Microsoft network adapter. I have searched the driver but had no chance. My question is where is it located on the CD-ROM of the 2012 Server? I use the version standard edition. Thanks for any advice.
Thank you all.
John Hayes
Hello
The question you posted would be better supported in the TechNet Forums. I suggest you to ask your question in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/categories/
Thank you
-
What changes does Network Access Manager has to do in Windows to work properly?
Our Network Access Manager in the Windows machines to work in cenario with ISE CISCO 802.1 x. In some machines NAM does not work well. What features of Windows 7 is NAM module needs to interact with the operating system?
Glad you were able to solve your problem and take the time to update (+ 5 from me). If your problem is completely resolved, you must mark the thread as "Answered" :)
-
Another problem with the configuration of Cisco VPN Client access VPN Site2site
We have a Cisco ASA 5505 at our CORP. branch I configured the VPN Site2Site to our COLO with a Juniper SRX220h, to another site works well, but when users access the home Cisco VPN client, they cannot ping or SSH through the Site2Site. JTACS contacted and they said it is not on their end, so I tried to contact Cisco TAC, no support. So here I am today, after for the 3 days (including Friday of last week) of searching the Internet for more than 6 hours per day and try different examples of other users. NO LUCK. The VPN client shows the route secure 10.1.0.0
Sorry to post this, but I'm frustrated and boss breathing down my neck to complete it.
CORP netowrk 192.168.1.0
IP VPN 192.168.12.0 pool
Colo 10.1.0.0 internal ip address
Also, here's an example of my config ASA
: Saved
:
ASA Version 8.2 (1)
!
hostname lwchsasa
names of
name 10.1.0.1 colo
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
backup interface Vlan12
nameif outside_pri
security-level 0
IP 64.20.30.170 255.255.255.248
!
interface Vlan12
nameif backup
security-level 0
IP 173.165.159.241 255.255.255.248
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
switchport access vlan 12
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passive FTP mode
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group network NY
object-network 192.168.100.0 255.255.255.0
BSRO-3387 tcp service object-group
port-object eq 3387
BSRO-3388 tcp service object-group
port-object eq 3388
BSRO-3389 tcp service object-group
EQ port 3389 object
object-group service tcp OpenAtrium
port-object eq 8100
object-group service Proxy tcp
port-object eq 982
VOIP10K - 20K udp service object-group
10000 20000 object-port Beach
the clientvpn object-group network
object-network 192.168.12.0 255.255.255.0
APEX-SSL tcp service object-group
Description of Apex Dashboard Service
port-object eq 8586
object-group network CHS-Colo
object-network 10.1.0.0 255.255.255.0
the DM_INLINE_NETWORK_1 object-group network
object-network 192.168.1.0 255.255.255.0
host of the object-Network 64.20.30.170
object-group service DM_INLINE_SERVICE_1
the purpose of the ip service
ICMP service object
service-object icmp traceroute
the purpose of the service tcp - udp eq www
the tcp eq ftp service object
the purpose of the tcp eq ftp service - data
the eq sqlnet tcp service object
EQ-ssh tcp service object
the purpose of the service udp eq www
the eq tftp udp service object
object-group service DM_INLINE_SERVICE_2
the purpose of the ip service
ICMP service object
EQ-ssh tcp service object
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 clientvpn object-group
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
inside_nat0_outbound list of allowed ip extended access any 192.168.12.0 255.255.255.0
outside_pri_1_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group NY
outside_pri_access_in list extended access permit tcp any interface outside_pri eq www
outside_pri_access_in list extended access permit tcp any outside_pri eq https interface
outside_pri_access_in list extended access permit tcp any interface outside_pri eq 8100
outside_pri_access_in list extended access permit tcp any outside_pri eq idle ssh interface
outside_pri_access_in list extended access permit icmp any any echo response
outside_pri_access_in list extended access permit icmp any any source-quench
outside_pri_access_in list extended access allow all unreachable icmp
outside_pri_access_in list extended access permit icmp any one time exceed
outside_pri_access_in list extended access permit tcp any 64.20.30.168 255.255.255.248 eq 8586
levelwingVPN_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
levelwingVPN_splitTunnelAcl list standard access allowed 10.1.0.0 255.255.255.0
outside_pri_cryptomap to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
backup_nat0_outbound list extended access allowed object-group DM_INLINE_NETWORK_1 192.168.12.0 ip 255.255.255.0
outside_pri_cryptomap_1 list extended access allow DM_INLINE_SERVICE_2 of object-group 192.168.1.0 255.255.255.0 10.1.0.0 255.255.255.0
outside_19_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0
inside_nat0_outbound_1 to access ip 192.168.1.0 scope list allow 255.255.255.0 object-group CHS-Colo
VPN-Corp-Colo extended access list permits object-group DM_INLINE_SERVICE_1 192.168.12.0 255.255.255.0 10.1.0.0 255.255.255.0
Note to OUTSIDE-NAT0 NAT0 customer VPN remote site access-list
OUTSIDE-NAT0 192.168.12.0 ip extended access list allow 255.255.255.0 10.1.0.0 255.255.255.0
L2LVPN to access extended list ip 192.168.12.0 allow 255.255.255.0 10.1.0.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
exploitation forest asdm warnings
record of the rate-limit unlimited level 4
destination of exports flow inside 192.168.1.1 2055
timeout-rate flow-export model 1
Within 1500 MTU
outside_pri MTU 1500
backup of MTU 1500
local pool LVCHSVPN 192.168.12.100 - 192.168.12.254 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 100 burst-size 5
ICMP allow any inside
ICMP allow any outside_pri
don't allow no asdm history
ARP timeout 14400
NAT-control
interface of global (outside_pri) 1
Global 1 interface (backup)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access
NAT (inside) 1 0.0.0.0 0.0.0.0
NAT (outside_pri) 0-list of access OUTSIDE-NAT0
backup_nat0_outbound (backup) NAT 0 access list
static TCP (inside outside_pri) interface https 192.168.1.45 https netmask 255.255.255.255 dns
static TCP (inside outside_pri) interface 192.168.1.45 www www netmask 255.255.255.255 dns
static TCP (inside outside_pri) interface 8586 192.168.1.45 8586 netmask 255.255.255.255 dns
static (inside, inside) tcp interface 8100 192.168.1.45 8100 netmask 255.255.255.255 dns
Access-group outside_pri_access_in in the outside_pri interface
Route 0.0.0.0 outside_pri 0.0.0.0 64.20.30.169 1 track 1
Backup route 0.0.0.0 0.0.0.0 173.165.159.246 254
Timeout xlate 03:00
Conn Timeout 0:00:00 half-closed 0:30:00 udp icmp from 01:00 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 01:00 uauth uauth absolute inactivity from 01:00
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
the ssh LOCAL console AAA authentication
http server enable 981
http 192.168.1.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outside_pri
http 0.0.0.0 0.0.0.0 backup
SNMP server group Authentication_Only v3 auth
SNMP-server host inside 192.168.1.47 survey community lwmedia version 2 c
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Sysopt connection tcpmss 1200
monitor SLA 123
type echo protocol ipIcmpEcho 216.59.44.220 interface outside_pri
Annex ALS life monitor 123 to always start-time now
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set esp-3des-sha1 esp-3des esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto ipsec df - bit clear-df outside_pri
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_pri_map 1 match address outside_pri_1_cryptomap
card crypto outside_pri_map 1 set pfs
peer set card crypto outside_pri_map 1 50.75.217.246
card crypto outside_pri_map 1 set of transformation-ESP-AES-256-MD5
card crypto outside_pri_map 2 match address outside_pri_cryptomap
peer set card crypto outside_pri_map 2 216.59.44.220
card crypto outside_pri_map 2 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
86400 seconds, duration of life card crypto outside_pri_map 2 set security-association
card crypto outside_pri_map 3 match address outside_pri_cryptomap_1
peer set card crypto outside_pri_map 3 216.59.44.220
outside_pri_map crypto map 3 the value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_pri_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
card crypto outside_pri_map interface outside_pri
crypto isakmp identity address
ISAKMP crypto enable outside_pri
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 50
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
!
track 1 rtr 123 accessibility
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
management-access inside
dhcpd auto_config outside_pri
!
dhcpd address 192.168.1.51 - 192.168.1.245 inside
dhcpd dns 8.8.8.8 8.8.4.4 interface inside
rental contract interface 86400 dhcpd inside
dhcpd field LM inside interface
dhcpd allow inside
!
a basic threat threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
a statistical threat detection host number rate 2
no statistical threat detection tcp-interception
WebVPN
port 980
allow inside
Select outside_pri
enable SVC
attributes of Group Policy DfltGrpPolicy
VPN-idle-timeout no
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal GroupPolicy2 group strategy
attributes of Group Policy GroupPolicy2
Protocol-tunnel-VPN IPSec svc
internal levelwingVPN group policy
attributes of the strategy of group levelwingVPN
Protocol-tunnel-VPN IPSec svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list levelwingVPN_splitTunnelAcl
username password encrypted Z74.JN3DGMNlP0H2 privilege 0 aard
aard attribute username
VPN-group-policy levelwingVPN
type of remote access service
rcossentino 4UpCXRA6T2ysRRdE encrypted password username
username rcossentino attributes
VPN-group-policy levelwingVPN
type of remote access service
bcherok evwBWqKKwrlABAUp encrypted password username
username bcherok attributes
VPN-group-policy levelwingVPN
type of remote access service
rscott nIOnWcZCACUWjgaP encrypted password privilege 0 username
rscott username attributes
VPN-group-policy levelwingVPN
sryan 47u/nJvfm6kprQDs password encrypted username
sryan username attributes
VPN-group-policy levelwingVPN
type of nas-prompt service
username, password cbruch a8R5NwL5Cz/LFzRm encrypted privilege 0
username cbruch attributes
VPN-group-policy levelwingVPN
type of remote access service
apellegrino yy2aM21dV/11h7fR password encrypted username
username apellegrino attributes
VPN-group-policy levelwingVPN
type of remote access service
username rtuttle encrypted password privilege 0 79ROD7fRw5C4.l5
username rtuttle attributes
VPN-group-policy levelwingVPN
username privilege 15 encrypted password vJFHerTwBy8dRiyW levelwingadmin
username password nbrothers Amjc/rm5PYhoysB5 encrypted privilege 0
username nbrothers attributes
VPN-group-policy levelwingVPN
clong z.yb0Oc09oP3/mXV encrypted password username
clong attributes username
VPN-group-policy levelwingVPN
type of remote access service
username, password finance 9TxE6jWN/Di4eZ8w encrypted privilege 0
username attributes finance
VPN-group-policy levelwingVPN
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
type of remote access service
IPSec-attributes tunnel-group DefaultL2LGroup
Disable ISAKMP keepalive
tunnel-group 50.75.217.246 type ipsec-l2l
IPSec-attributes tunnel-group 50.75.217.246
pre-shared-key *.
Disable ISAKMP keepalive
type tunnel-group levelwingVPN remote access
tunnel-group levelwingVPN General-attributes
address LVCHSVPN pool
Group Policy - by default-levelwingVPN
levelwingVPN group of tunnel ipsec-attributes
pre-shared-key *.
tunnel-group 216.59.44.221 type ipsec-l2l
IPSec-attributes tunnel-group 216.59.44.221
pre-shared-key *.
tunnel-group 216.59.44.220 type ipsec-l2l
IPSec-attributes tunnel-group 216.59.44.220
pre-shared-key *.
Disable ISAKMP keepalive
!
!
!
Policy-map global_policy
!
context of prompt hostname
Cryptochecksum:ed7f4451c98151b759d24a7d4387935b
: end
Hello
It seems to me that you've covered most of the things.
You however not "said" Configuring VPN L2L that traffic between the pool of VPN and network camp should be in tunnel
outside_pri_cryptomap to access extended list ip 192.168.12.0 allow 255.255.255.0 object-group CHS-Colo
Although naturally the remote end must also the corresponding configurations for users of VPN clients be able to pass traffic to the site of the camp.
-Jouni
-
Windows 7 and the location of Cisco anyconnect
Hello world
He had to confirm if cisco anyconnect vpn will work only if it is
C:\ProgramData?
Will it work if it is under
C:\Program Files (x 86) \Cisco
Concerning
Mahesh
Parts of the application are in two locations by default and try to move may cause instability.
-
Original title: unable to connect to the internet
Whenever I connect to my computer and get it on my desk, it goes on to say that Cisco AnyConnect VPN Service not available. How can I fix? I am not connected to the internet and I can't connect to the internet as well. He said also Cisco AnyConnect VPN service agent is not an answer. Please restart this application after a minute. Also, I can't use my firewall for some reason, if I try to allow its loading and the greenbar's going that far - then stops and says that there is an error. I forgot where I tried to activate.
Oh thanks for the help but I fix it myself. I just did a system restore to a month before
-
The traffic load between the power of Cisco ASA and FireSight Management Center fire
Hi all
I have a stupid question to ask.
Can I know what is the traffic load and the e/s flow between firepower Cisco ASA and FireSight Management Center?
Currently working on a project, client require such information to adapt to their network. Tried to find in the document from Cisco, but no luck.
Maybe you all have no idea to provide.
It varies depending on the number of events reported from the module to the CSP. No event = only health controls and policy changes are exchanged. 10,000 events per second = much more traffic.
Generally it is not a heavy load, however.
-
Issue of Cisco AnyConnect VPN access
We have configured a Cisco ASA 5505 with access AnyConnect. It works very well. However, these users can't ping on the private network devices. We have configured all devices on the network with an address 10.10.10.0/24 space. The inside interface of the ASA I 10.10.10.1/24 and the VPN return addresses are 10.10.10.50 - 10.10.10.65/24.
They users can use SSH and Oracle or MySQL calls but can't ping. Obviously, I'm looking for something.
Thank you.
Dwane
Hi Sylvie,.
Most likely, your ASA missing no. - nat between inside the interface and remote vpn-pool address range.
Quick Trobule shooting, thanks for posting your config and do not forget to remove the config security information.
What version of your ASA?
Thank you
Rizwan James
-
Failed to download or run the customer of Cisco Anyconnect secure mobility
I'm trying to download and install the VPN client on my laptop to access my work computer. I tried the automatic online download and received this error:
"Cannot install the Client AnyConnect Secure Mobility Client 3.1.00495 with the Installer error: incorrect function." A VPM connection cannot be established. »
I also tried the manual download, but my computer won't run the executable. I'm running on Windows 7 64 bit. Any help would be appreciated.
You can try the fix below. The user made the same mistake.
"I was able to install the client correctly by creating a new temporary user account and uses this account to install the client on a global scale on the machine. After successful installation, remove the temporary user account. It worked for me and it was easy. It may not work for all instances of this issue. »
I hope this helps.
Please evaluate the useful messages.
Thank you.
-
The Atheros driver update / / no network found
Hello
After having the support assistant yell me for 2 days on updates, I thought it was finally time to upgrade my HP Pavilion g6-2230sa Notebook PC.
Is there a driver for Atheros 802.11b/g/n wifi adapter AR9485 update, which seems to have destroyed my adapter. Troubleshooting shows no problem, but it is impossible to find all the networks.
Thinking (read: know) that it is a driver error, I tried to roll back the driver to the previous version that worked very well. I couldn't restore the driver becase there was no option for. I guess that's because it has been updated through the support Wizard.
After trying for two hours to get in touch with HP's award-winning customer service, I gave up and found myself here, at the mercy of everything what you forum fans.
If someone has experienced this situation or something similar and have a solution, please, please, let me know what magic you have to fix!
Thanks in advance.
DT
After 4 hours of tweaking, pull hair and cigarettes I finally fixed.
Several attempts to restore the system and uninstalling the AV and other programs not factor eventually led to a restoration of the system successfully.
Feature WiFi is back and I will never ignore my scream HP support assistant.
Thanks to those who helped, much love.
DT
-
Time Machine does not recognize the backups when you configure the external drive as a network drive
I have a MyBook 5 to disk with a 1 TB partition that I used as a destination for Time Machine > 1 year now. I recently gathered the energy to connect the my book on my Airport Extreme Base Station (model 2014? the second model) to implement wireless backups. I plugged the MyBook on the base station, set up file sharing in AirPort Utility and created an account with access to the partition of TM on the MyBook under the section 'Sharing secured disk' utility.
Now, when I open the time Machine, I choose this partition, but it does not seem to recognize that I have a string of backups already there. Then he tries to start a new backup. So a few questions.
- Should I abandon my old backups and start over? I don't think that I did nothing to my system in these last days that I would need to be careful, if I couldn't rely on a TM backup from that moment.
- Is there a way to get TM to recognize my old backups and start from there? I do not look down the barrel of a backup of time + 13.
If 1, should I reformat the partition TM in order to start over? I don't see the older backups on disk when I look in the Finder, but I know that they are there and they are too much space. Help/suggestions appreciated!
-
Record of equipment for the Cisco AnyConnect client NAM module
Hi all
Forgive me if this has been asked before or on the Cisco site somewhere (I could just find)
Are there hardware specifications for the Cisco Anyconnect Network Access Manager module?
Where can I find what wifi chipset is compatible with?
Thanks in advance for your answer.
Compatibility with the NAM module is based on the chipset not guest OS. The current operating system compatibility is listed here.
-
Tecra M11 has a trap door for access to the hard drive?
Can someone tell me if the Tecra M11 is equipped with a door to provide access to the hard drive?
Previous Tecras have such a door, but I can't say for some photos of the site Web or the M11 manual if this still applies. I need to know before ordering.
Thanks in advance for any help.
Hello
I put t know what you mean exactly. hatch giving access to the disk hard but the notebooks THAT HDD is placed at the bottom of the unit.
You can easily remove the cover that secures the HARD drive Bay to get access to the internal HARD driveWelcome them
-
I can't find the driver for my network on 431 Hp windows 7 32-bit controller
Hello, I have a problem here. IM using 431 HP with windows 7 32 bit. I can't find the right driver for my network controller. Here's my hardware ID:
PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01
PCI\VEN_168C & DEV_002B & SUBSYS_1461103C
PCI\VEN_168C & DEV_002B & CC_028000
PCI\VEN_168C & DEV_002B & CC_0280I try so many driver for wifi but none of them works. my wifi can not always be used, and it says that it cannot find a driver.
Here is the status of the device:
The drivers for this device are not installed. (Code 28)
There is no driver selected for the item or a set of device information.
To find a driver for this device, click Update driver.
Please can someone help me? Many thanks for you guys
Hello:
Here is the link for the driver you need for the Atheros wireless card in your notebook.
Maybe you are looking for
-
CPU upgrade Pavillion dv7 Notebook
I have a Pavilion dv7 series laptop 6000 P/N LY849UA. It has an Intel Core i7-2630QM processor. What is my path to upgrade for this laptop? Can I install one of the i7 processors 2nd generation? If so, which? Any help I can get with this, I'm going t
-
I'm trying to uninstall something programs, that a message log setup not found...
-
Having trouble finding the "Service Pack 3" for Windows Vista.
How can I get windows service pack 3 for vista? I am trying to connect to Zune for my Nokia Lumia 710 and it says I need "Service Pack 3" to run the program, but I could not locate "Service Pack 3" for Windows Vista. Can someone help me?
-
traffic Windows 7 not out on the interface of traffic as it is assumed
Hi experts I got this company of Win7. I want to install two network interfaces on it. A network interface will be for the management of the machine itself. and another interface for application traffic. I had an application that I run and which cons
-
I try to configure interfaces VLAN on a 4451 X and problem. I can configure subinterfaces, but I want to set up a real interface VLAN like this: B12_3925 (config) #int vlan 11* Jan 11 21:17:20: % LINEPROTO-5-UPDOWN: Line protocol on the Interface Vla