traffic Windows 7 not out on the interface of traffic as it is assumed

Similar Questions

• My computer is stuck on the preparation set up windows do not turn off the computer__

  I bought a new Toshiba Harvey Normans form - everything was going well until I turned the thing on and comes from this sign prepare to set up windows do not turn off the computer - 30 hours so far... everybody is why if there is a problem is - it may not be fixed. I cannot F8 or do something because when you stop and restart the computer, what happens with the same... also say how I get to the menu restore when I can't cross the saying prepares to set up etc etc, I'm typing this from my old computer and I get very very stressed to this topic

  Take it back to Harvey Normans. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM.

  My pc says that windows does not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. It is said it can be repaired by using the original installation CD, but we do not have. Any ideas please?

  The file is missing or corrupt is one of your files in the system registry.

  By far, the best way to recover from this is to go to another computer and create a free Hirens Boot CD.
  Download Hirens: <> http://www.hirensbootcd.org/download/ > (link at the bottom of the icon of the disk)
  Hirens CD burning <> http://www.hirensbootcd.org/burning/ >

  Once you create the CD, and then start your system of problem with this CD.  In the first window, select "Mini Windows XP" and wait for the system to start.  When it starts, go to the Hirens Boot CD menu and select
  Register-> Registry Restore Wizard.
  then follow the prompts.  This wizard will return a copy of your registry database from backups that are stored with your system restore points.  After the restoration, stop, remove the CD and restart.

  When you start your system, it is recommended to perform a system restore operation to ensure the consistency of your system
  "How to restore Windows XP to a previous state"
     <>http://support.Microsoft.com/kb/306084 >

  Also, this error is almost always accompanied, if not caused, the corruption of the file system.  Also a good idea to perform a check disk (chkdsk) operation with the option "repair".
  "How to perform disk error in Windows XP check"
     <>http://support.Microsoft.com/kb/315265 >

  The hard way to get back is covered in the following Microsoft KB article, but if you have installed a large number of service packs for your installation of XP, I don't give you many chances to get past part 1. (And there's also an installation CD to access the Recovery Console)

  "How do I recover from a corrupted registry that prevents Windows XP boot"
    <>http://support.Microsoft.com/kb/307545 >

  HTH,
  JW

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• "When restarting, get the error, Windows could not start because the following file is missing or corrupt: &#60; root Windows &#62; \system32\ntoskrnl.exe.

  Original title: black screen

  Attempt to restart the Gateway system running XP Pro.  The message "Windows has not start because the following file is missing or corrupt: \system32\ntoskrnl.exe" Please reinstall a copy of this file.  What do I do and where is this file?

  There is a good chance that the disk check running the Recovery Console will solve the problem.

  1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
    
  2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
    
  3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
    
  4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
    
  5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
    
  6. at the end of the output of scan type > press ENTER.
    
  7 restart your computer.

  If you do not have a Windows Xp disk, follow the instructions HERE to create a Windows Xp Recovery Console

• (SOLVED) Windows could not finish repairing the problem because it is impossible to perform the following action: renewing your IP address

  Computer Dell laptop Windows XP SP3 - processor Intel Celeron M 1.40 GHz, 512 MB Ram, ATI MOBILITY RADEON 9000

  The local connection is working fine but my wireless connection does not receive through my laptop. The wireless works since it goes through my PS3 and my sister's laptop perfectly.

  I used the repair, but it will say:
  Windows could not finish repairing the problem because it is impossible to perform the following action: renewing your IP address

  I used in the cmd command:
  ipconfig/renew
  Needless to say a message:
  No operations can be performed on the wireless network connection, although it has its media disconnected.

  Help, please

  Received my solution of another comforter

  Told to go to my router linksy page http://192.168.1.1 setup and change the wireless security mode. It is in mixed mode to WPA2/WPA and I changed it to WPA2 Personal and it worked!
  Thanks for trying to help JW! : D

• Unable to repair the connection of local error: Windows could not finish repairing the problem because the following action could not be completed

  Original title: Repair the connection to the local network.

  When I try to repair the connection to the local network I get the following message: "Windows could not finish repairing the problem because the following action could not be completed: clear the cache DNS."  For assistance, contact the person who manages your network. "How can I solve this problem?

  Hello

  1. what exactly is the problem you are experiencing when connecting with Internet?

  2. what type of Internet connection you have (wired or wireless) sound?

  3. don't you make changes to the computer until the problem occurred?

  Method 1: To resolve this issue, follow these steps:

  (a) click Start, click run, type services.msc, and then click OK.

  (b) in the list of services, click DNS Client.

  (c) ensure that the status column displays started and that the Startup Type Automaticcolumn.

  (d) if the service is not set to started or if the startup type for the DNS Client service is not set to Automatic, follow these steps:

  a. right click on Client DNS and then click Properties.

  b. in the Properties of the Client DNS dialog box, click the general tab and then click Automatic in the list Startup type .

  c. click Start, click applyand then click OK.

  Method 2: Wi - Fi and in Windows network connection issues.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows?T1=Tab03

  Hope this information is useful.

• Windows will not start because the following file is missing or corrupt &#60; root windows &#62; &#60; hal.dll windows &#62;

  When I turn on my PC a black screen appears for about 5 minutes, then the following message: Windows could not start because the following file is missing or corrupt I can not any more access to the computer and having to turn it off.

  Hello

  I suggest that you follow the steps described in the links below and check if they help to resolve the issue.

  Link 1:

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  http://support.Microsoft.com/kb/330184

  Link 2:

  IF the steps in the link 1 does not work, check the steps in the link below.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

• Error - in Windows XP the external monitor laptop becomes primary, but Explorer windows do not go to the main window.

  Original title: xp laptop lidswitch and extended mode.

  I have xp laptop. I connect external monitor and set it to the extended mode with my laptop LFP as main and external monitor as secondary. Configuration of the power for the closure of the cover option as long as "do nothing".  Open an Explorer window and drag extended display. Then close the cover. The external monitor becomes primary, but the Explorer windows do not go to the main window. They are always extend on even though the extended mode is it more. Is this a known problem with XP? Anyone know? Thanks for your help...

  Hi jt_pan,

  Try to share the desktop on two monitors.

  For more information, refer to this link: How to configure and use multiple monitors in Windows XP?

  Hope the helps of information.
  Please post back and we do know.

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: &#60; root windows &#62; \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Error: "Windows has not start because the following file is missing or currupt.

  Original title: System 32 error

  I have a netbook and wen as its turned on it just comes up with windows could not start because the followingfile is missin or currupt and askin and then reinstall how can I do this wth on a hard drive

  Hi Amandapowell,
   
  Try the steps listed in the following article and check if this can help:
  How do I recover from a corrupted registry that prevents Windows XP startup

• Error message: Windows has not start because the following file is missing or damaged

  This error sometimes occurs when starting upwards from my Win XP computer:
  Windows could not start because the following file is missing or damaged. Windows root\system32\hal.dll. Please reinstall a copy of the above file.
  the computer then complete the beginning upward and operate normally.

  How can I stop this error message?

  Kind regards

  Hello

  ·         Since when are you facing this problem?

  ·         Remember to make changes to the system?

   

  I suggest to disable the startup items when the system starts up and then check if the problem is resolved.

  How to disable programs that run when you start Windows XP Home Edition or Windows Vista

  http://support.Microsoft.com/kb/270035

  I suggest following the steps mentioned in the article below and check if

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• Windows could not connect to the Group Policy client service

  I get the error message after restarting my laptop with Vista Home:

  Windows could not connect to the Group Policy client service. This problem prevents limited users to logon to the system and administrative user, you can view the log of events system for details why the service did not respond.

  I'm the only user on my laptop with laptop admin rights works correct with few programs but it seems that I have no ADMIN rights now. I have not authorized for the restoration of the system, start-up ccleaner.exe, instalation of new software, etc.

  I tried this:

  1.
  

  http://social.answers.Microsoft.com/forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-BFBA-7a98e642c009

  with hidden Admin, but for Admin hidden even in safe mode was not allowed to change my account more up/down.

  My laptop have orginal Vista and I have no bootable CD.
  

  2.

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1

  result:

  netsh

  Netch > winsock reset

  Elevation of the requiries the requested operation.

  Help, please.
  

  Hi SSergo,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in theTechnet Group Policy Forum

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System Event Notification service - cannot connect to a Windows Service. Windows could not connect to the System Event Notification service

  I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony

  Hi 1234Tony,

  First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.

  To repair and put back the Windows Vista

  1. Click the Start button.
  2. Type Cmd in start it the search text box.
  3. Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
  4. Type netsh winsock reset in the command line shell, and then press the Enter key.
  5. Restart the computer

     If please reply and let us know if your problem is resolved or if you need further assistance

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.