Dealing with purge of one voice channel to another Podcast. Chaining aside?

Similar Questions

• PE 3 copy one audio channel to another?

  I have a DV source that has been registered with an external microphone that recorded only in one channel. Is it possible to copy this channel to another in EP 3? I can't find a way to do it. Course, it would be actually mono, but it would sound better with headphones.

  Thank you

  Bruce

  If that isn't what you want, the next workflow would be to simply duplicate your source 1 channel, to the next Audio track free. Then go to the window > Audio Mixer and one of these titles to Pan to the left and the other Pan to the right. I'd left incomplete, or in its own right, but somewhere between the two. The reason is so that you have a little bit of 'Phantom Center' in you Mix Audio. I find full left and right full panoramic ringing very artificial and only use it if I want to such an effect.

  Good luck and if this only gives you what you want, there are still more suggestions, just waiting to be used...

  Hunt

• How can I transfer a podcast of one Apple ID to another Podcast Connect?

  Currently, I run podcast channel for my organization and presented the flow through the old system of Apple in iTunes itself. I did not know that the Apple ID I was connected at the time where that would bind the podcasts in the iTunes Store with (my personal Apple ID). Now, with the advent of the Podcast connect, I noticed that the ID assigned by the work of Apple doesn't have these podcasts available when connected to iTunes Connect. I checked that they are when I intend however to connect to iTunes Connect with my staff.

  Is there a way to 'transfer' of the podcasts to my Apple ID assigned by the work?

  You need support if they can change it for you. Go to https://itunespartner.apple.com/en/podcasts/overview and click on the link "Contact us" at the bottom of the page.

• I do not want to promote the material for your business but I don't know how to do this. Could I be put in contact with the one dealing with promotion of contact microsoft or microsoft studios.

  Dear, that which which may concern,.

  I do not want to promote the material for your business but I don't know how to do this. Could I be put in contact with the one dealing with promotion of contact from microsoft, or microsoft studios, anyone who takes care of the halo franchise.

  Hello

  Microsoft - unsolicited ideas
  http://www.Microsoft.com/en-us/legal/intellectualproperty/copyright/default.aspx#O14

  343 industries manage Halo - check community and forums
  https://www.halowaypoint.com/en-us

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error blackBerry software - synchronization failed, impossible to deal with organizing data

  I had a Q10 Blackberry last week.  I downloaded and installed the PC of Blackberry link 1.2.2.13 version.  Two-way sync USB worked fine.  Now, all of a sudden, I get the error message "synchronization failed, impossible to deal with organizing data."   I tried to reset the synchronization options, but not joy.  Also tried to uninstall and reinstall the software Link 1.2.2.13, once again no joy.  Any suggestions?

  UPDATE: I spent 4 hours on the phone and the remote session with the help of Blackberry last night.  After doing some troubleshooting to isolate the problem, determined that something on the device caused the problem of Outlook synchronization. One thing I've learned, it's that it can take a long time to synchronize and even though the progress of the screen may appear frozen, let it go until the end - sometimes it took 20-25 minutes, but eventually completed. Here's the process we went through - I would recommend appellant help BB and work with them to make sure you have not accidentally delete Outlook contacts and calendar of important information of your PC or BB device!.

  (1) we tried an uninstall/reinstall the PC Link BB software and that did not fix the problem.

  (2) to isolate the problem of synchronization.  We first did a synchronization of 2 channels 'contacts' and 'calendar' and who was a failure.  Then did a synchronization of only 2 channels 'contacts' and managed.  Then did a synchronization of only 2-way 'calendar' and that was a failure - so the problem was linked to calendar data and something on the device has been the cause of the problem or corrupted.

  (3) link BB allowing us to make a backup complete unit.

  4) then decided to do a 'Wipe security' on the device of BB Q10 to erase all the data and settings and return to a clean boot device configuration.  I was nervous about it - make double sure that Outlook all contacts and calendar data on the device and the PC are completely backed up in case something bad happens.  Nothing serious happened, but I was gald, we made the backup!

  (5) has the 'Security Wipe' feature (on the device, the settings > Security and privacy > wipe security) and phone rebooted without problems (takes a while to do).
  

  (6) then used link BB to do a sync test 1 channel 'contacts and calendar' from PC to device.  It worked without problem.

  (7) we then used BB link do a "restore" full backup of device, as we did in step 3 above.  It takes a while to make and was a success.

  (8) once the restoration of the aircraft was complete, BB link configured to perform a synchronization of 2 channels of the two 'contacts' and 'calendar '.  Does the synchronization and was a success.  Did a test by adding the new entry of the calendar on PC and did another 2-way sync - all worked very well.  Seems that the problem has been corrected, but will follow in the coming days.

  Lessons learned:

  (1) If you have a lot of Outlook contacts and calendar entries, the synchronization may take a long time.  Be patient and let it run - even if it seems stuck, etc!

  (2) save all Outlook data on the device and the PC to make sure that you have a backup something bad happened during troubleshooting.  We had not something bad happens, but I was gald we made a backup anyway.

  (2) call BB help - support person, I worked with was fabulous, even if it took some time to work through a patch.

   

• How can I copy recipients of a letter sent in a fresh mail I have to deal with some of the deleted recipients?

  I want to be able to select the recipients of a new mail from a mail sent. I want to be able to copy some of the recipients of those previous mail, but not all. Is there a simple way to copy all the old recipients in a single operation, and then selecting some recipients to delete in one operation?

  jazzebel2 said

  My original question remains: how to remove some of the recipients at once? Is it possible to deselect say's five recipients on 20 without each of them manually and detached, one at a time?

  Really, I've had dealing with the situation that you have described. I don't think it's possible with current TB. You may request a feature on Bugzilla request.
  https://Bugzilla.Mozilla.org/

• Problem with output 5VDC NI 9411 channel

  Hello

  I'm having a problem with output 5VDC NI 9411 channel. According to the specification of the module, it was stated that the module required external power from 5 to 30 VDC. Game of supply the module with the requirement of tension, I am still unable to get the output voltage of the output channels. Does this mean that the output voltage may be available depending on the program?

  Thanks in advance,

  Kind regards

  Mike640

  Hi Mike,.

  Thanks for posting on the forum of National Instruments.

  You should still be able to get an output voltage in properly feeding the NI 9411 and your external device.

  If you don't have a power supply of 5V to power the external device directly, or if you want to simplify the cabling, you can connect an external power supply to the Vsup and COM terminals on the connector terminal block screw NI 9411 and connect the external device to one of the pins Vout + 5. If the external device is already powered, you have not need connect a power supply on the NI 9411 or plug the Vout of + 5 to the external device.

  I hope this helps.

• Dealing with the size of the stage and the different orientations

  I am clearly dense, but I'm looking for examples of how others deal with the need to have apps that funciton in mode landscape or portrait.

  My first effort simply uses a scene from 600 x 600 with automatically guide the true value. It seems to work OK. The app draws, in the center of the screen of the Playbook (Simulator), regardless of the way the screen is oriented. Waste certain properties of the screen, but for my purposes, it doesn't really matter.

  To try to make it easier to deal with some questions I had try to implement new, I tried to make a step in 1024 x 600 with my stuff centered in space. Works very well in the landscape, but when in portrait mode, the app has been reduced to 1024 to the 600 dimension tree. I turned on Noscale for the scene, and now the app is drawn with the scene at the upper left corner then the app is cut on the right side of the screen. Is there a way to make the center of the scene?

  For my next one, I'll probably need to have two settings screen which are used based on direction - guidance on which is easier to deal with?

  I just wanted to mention that I removed the rotation and repositioning of the scene in the event onOrientationChange because I'm sure it was bad and can't remember why I had done this.

  Also, I recommend the mobile controls around on stage resize because when changing the orientation event is called, stage.stageWidth and stage.stageHeight properties have not yet been updated.

  The only uses for the orientation change event that come to mind anime the passage of an orientation towards another and the reorientation of handling maually when you autoOrients set to false.

• How to deal with operating system windows 8.1 and apps on usb device

  Hi, I have a laptop Lenovo G505. Windows 8 64-bit was preinstalled in it. Later, I upgraded to 8.1. Laptop is almost 9 months and still under warranty. Since a few days, built Lenovo solution Center alert this analysis of hardware detected failures in one or more devices. On suggestion of Lenovo, I ran hdtune pro app in my machine and it also detected 3 hard drive errors. As my machine is under warranty, Lenovo is ready to replace my hard drive with a new one. But they say that it is the responsibility of the customer to return the windows 8.1 operating system and install in the new drive and their liability is limited to the replacement of the hard disk only. I am not computer savvy and I request concerned to guide me how to deal with operating system windows 8.1 on external media like USB, DVD, and install in the new drive. I also installed a number of apps and paid games. Therefore, I would like to resume these games also files so that I need not buy again. Assistance in this regard is required.

  Hello Mohan,

  Thanks for posting your query in Microsoft Community Forum.

  I can of course understand the situation and will be happy to help with your query.

  Let me ask you;

  • You have the key product for Windows 8 or 8.1?

  You can create an installation media (DVD/USB) for Windows 8.1 and re-install when you want. However, in order to create an installation media for Windows 8.1, you need the product key. If you don't have the product key for Windows 8.1, you can not create installation media.

  You can create the installation media for Windows 8 by using the product key Windows 8 If you have. In this case, install you Windows 8 first and then go to Windows 8.1 through store.

  As far as your paid apps (purchased by store) are concerned, you should be able to install them as soon as you sign in with the same Microsoft Account where apps were purchased.

  You can see the steps indicated by Ronnie Vernon replied on 24 December2013, re - install paid apps.

  You can follow the steps below to create installation media.

  1. Run the program Windows 8.1 configuration or installation of Windows 8 (depending on the availability of the product key for the specific operating system.

  2. When you are prompted to run or save the file, choose run

  3. When you are prompted to enter a product key, enter the 25-character product key, that you received when you purchased Windows 8.1 (or Windows 8).

  4. When you are prompted to install Windows 8.1 (or Windows 8), select install by creating media and then click Next.

  5. Select the type of media you want to use: either a Flash DRIVE or a DVD.

  To create a USB flash drive

  1. Click on the USB flash drive.

  2. Plug the USB key into a USB port on your PC.

  3. When you are prompted, select the USB key that you want to use, and then click Next.

     If you have files on the USB flash drive, it will remove them.

  To create a DVD

  1. Click on the ISO file , and then select the location where to save the ISO file.

  2. Insert a blank recordable DVD into your DVD drive.

  3. Burn the ISO of the DVD file using Windows disc Image burner, or another program DVD burning.

  Note: Ensure that the USB or DVD key that you use has nothing else stored on it and has a sufficient free space to download the Windows 8.1 Installer: about 2.3 GB for the 64-bit version.

  You can also read the article below to create a USB stick recovery.

  Create a recovery USB disk

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Of EPSON printer driver dealing with CD printing is not installed

  Fantastic little printer and I want to continue to use it.

  I managed to install all the drivers for it, except one. When I try to print on a cd/dvd, I get the message "thedriver of printer EPSON The dealing with CD printing is not installed". I have been all over the internet, but all I found was a more recent version of programming Print CD that gives me the same message.

  I use a laptop Lenovo G505 with windows 8.

  Any pointers in the right direction for these drivers would be very appreciated :)

  Original title: "Epson R300/Windows 8."

  Hi Neil,

  Thanks for the reply.

  Please provide detailed information about the issue.

  You mentioned printer works very well as you are able to print on paper or printing on CD/DVD covers.

  Whenever you try to print on CD/DVD you get the message from is not installed dealing with EPSON The printer driver to print CD.

  You can check the link to fix the problem.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?infoType=FAQ&OID=29081&FOID=178014

  Note: Article is for Windows 7, but also applies to Windows 8.

  If the problem persists, I suggest you refer to the EPSON forum support.

  You can check out the link below to send your request to the support forum EPSON.

  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp

  I hope this helps. If you have any other questions, we will be happy to help you.

• Image processor "sorry, I could not deal with the following... * all."

  Hey! I so about 150 files opened in Photoshop. They are for a customer and the customer wanted individually to certain effects on each file. The files are RAW initially, first imported in Lightroom as .dng, then all my tonal changes made in Lightroom. I then opened images as smart objects in Photoshop, with a script of Lightroom. I then did the individual work on each image in Photoshop on the assumption that it would not trouble to save using the Image Processor script. When it came time to save, I tried save as .tif files using Image Processor. I selected the target in the form of open files files, set my destination folder, chose the TIF format and click on run in the top of the window. He shortly after said one very fast without source images, which disappears and then he says: "Sorry, I couldn't deal with the following" and then lists all of the 150 open pictures. It is a big problem because I'm on a lack of time.

  Any help or another idea for how to register all these images open in TIF or PSD even at this stage is extremely appreciated. I think there must be a fix or other road opposite to old fashion one save under...

  Thank you!

  !

  It doesn't look like the IPP will not new document either.

  He can. I added an option that can be set in the script to take care of this problem.

  //

  PROCESS_UNSAVED_IMAGES

  This will allow the treatment of unsaved images. To make this work,

  an unregistered image file is ~ / Desktop. If a file extension is

  not in the name of the image, .psd is used.

  //

  ImageProcessorOptions.PROCESS_UNSAVED_IMAGES = true;

  By default, it is false to get the 'traditional' behavior Set to true will leave PPI to process new images, not registered.

• Dell warranty and dealing with people who do NOT SPEAK ENGLISH

  I can assure everyone that I WAS a loyal user of dell for MANY years... I use the past tense as I did with DELL... My DELL perferred account will be in default because I will give DELL NEVER a PENNY of my money...

  My monitor is toast. Called dell it was under warranty. They promised to send a new monitor. I got a monitor refurbished which was different from MY monitor. My speaker wire does not match the plug on the monitor... Still called DELL... had the privilege of trying to talk with someone who doesn't even speak good English. He said it would be "CHECK IN IT"

  3 days later, DELL called me. Even someone who doesn't speak English well. He said he "checked in" and they sent me the correct monitor. I try to tell him that the monitor is NOT the right model, as the Speaker Wire plugs are different. He tells me it is the same model. Funny because one, they sent looks NOTHING like the one I got

  He told me that he "CHECK IN" ask him what you most need to check on? Did you check for 3 days and came to the conclusion that I had the correct model. Your DELL person, HUNG UP ON me... I'M DONE WITH DELL...

  EVERYONE > PLEASE BE CAREFUL DEALING WITH DELL > NOT A HONEST BUSINESS > YOU LOST A GOOD CUSTOMER OF DELL

  OH by the way... My TV Vizzio bought Dell... TOTAL WASTE... ANOTHER BIG PURCHASE FROM DELL... $ 1200 FOR A PLASMA SCREEN THAT DOES NOT WORK... CAN ' T BE REPAIRED AND IS A WHOLE 2 YEARS OLD...» PLACE YOUR HAND ON YOUR BUTT DELL > I DO NOT PAY FOR GARBAGE!

• Dealing with the size of the large file CS5/Aperture 3

  Is it possible to save a PS image changed completely without using 150 MB of storage? I opened a NAVE MB 18 of A3 to PS. converted to B & w using a variety of settings in CS5. Save as a PSD not flattened, gave a 150 MB file size. A flattened jpeg file is 18 MB. 150 MB images will quickly devour disk space. The warning in jpeg triangle suggests that not all layers are saved. Thank you.

  in order to save in layers, I'll have to deal with 150 MB of files.

  PSD files use compression (I forgot what the name), a file tif layered with one of the cuts without loss can be smaller but take longer to save and open.

  If I want to include all the layers in a jpeg file, flatten it before the record?

  If a file contains layers and you save a jpg file off it will automatically be a flattened image copy.

• Best way to deal with pictures from the start? (Bridge CS5 and iPhoto)

  Hi all

  I am just learning the strings of all the suite CS5 and began to add keywords etc in bridge, when I realized that I couldn't access the files in my iPhoto library ('09). I read a few threads on this topic, but have not really found a consensus on how to deal with it.

  I think I'm in a good position to get things right from the start, because I have no tags or sides etc. in my configuration of iPhoto (and only add keywords for the few photos that weren't in my iPhoto library), and wonder what you think is the best way to sort photos given I intend to use them in web design etc. and all the parts of my suite CS5.

  If the photos in iPhoto is the best what is the best way to do it? I have read suggestions do a right-click on the library and click "Show content" - or something like cela, but that does not come up as an option when I right click my iPhoto in Bridge library. Thanks a lot for your help!

  Please let me know if there is any info I could give you that could be useful in order to understand this one.

  Best,

  Mara

  PS: for the temporary folder, I use a name like to-do Images

  Remember once the keywords are used is not just the manipulation/image adjustments which are important metadata but also robust observation with integrity

• PCTCT download the folder with subfolders in one operation.

  Hello world

  I have a folder full of subfolders with images in them and I want to upload them to an ftp server. Is it possible to load coldfusion to download this folder with all its sublfolders and its contents?

  Thank you in advance,

  Yannis

  The thing is with recursion, we didn't need to worry about any level other than the 'current' hierarchy and then make the recursive call at the right time.  The Act of recursing automatically sorts the rest.

  A trap I saw people stuck at bottom tried something recursive, is that they try to organize all of the "final result" in their head (like cross sub-activity sub-sub-sub-directories), considering that it is simply useless.  Always focus on achieving a level of this right and then call the function itself again for the next level of the process.  All the nesting is managed / handled automatically by recursion.  I guess the trick is to be able to be clear in his mind what needs to be passed to the function - of any arbitrary point - to be fully able to deal with only one level and how to take this info and treat it so as to obtain the data required for the next level.

  I guess, this requirement, pass in the base file system directory, as well as the base dir of FTP.  Recursive subsequent dirs "base" can be arranged simply by adding a subdirectory on the current directories and passing the result in the recursive function call.

  To save the need to use recursion, can use recursive integrated functionality of the tag, then by a flat iteration on this recordset, using the paths of each record to invent the FTP subdirectory.  Then create the remote directory (if the current recordings is a dir) or FTPing the file (if it is a file).

  Not really the one-fell-swoop ALEXANDER is promising, but probably is not so complicated (even though I was hesitant to suggest notions now).

  --

  Adam