Need help, something took control of my system!

Similar Questions

• I need help with the control of two .swf in third.

  Hi, thanks for reading!
  
  I need help with the control of two .swf in third.
  
  I have a problem when I need to use a .swf in a digital signage solution, but were advised by the Legal Department, it cannot be changed in any way, I can not also have the source file blah blah blah. I pulled the .swfs on their site and I decompiled to see what I was up against.
  
  The main SWF that I need control is HCIC.swf and the problem is that it starts with a preloader, which, after the loading stops on a framework that requires user input to (button) on a play button, until the film will proceed and replay.
  
  What I've done so far is to create a SWF container, HCIC_container.swf, which will serve as a target for the HCIC.swf and I would like to send actionscript in the file, I am not allowed to edit.
  
  I managed to get done with help from someone on another forum. It is my hope that the following script just start HCIC.swf a framework after the preloader and button play and just play through.
  
  var container: MovieClip = createEmptyMovieClip ("container", getNextHighestDepth());
  var mcLoader:MovieClipLoader = new MovieClipLoader();
  mcLoader.addListener (this);
  mcLoader.loadClip ("MCIC.swf", container);
  
  function onLoadInit(mc:MovieClip) {}
  mc.gotoAndPlay (14);
  }
  
  But unfortunately it does not solve my problem. Because there is a media - controller.swf, which is charged by HCIC.swf who has orders, including the play button to start HCIC.swf.
  
  Here is a link to a .zip with all 3 files .swf file and all 3 .fla files.
  
  http://www.axiscc.com/temp/HCIC.zip
  
  What I have to do is to automatically start the HCIC.swf file, bypassing the pre-loader and play button without having to edit it or in the media - controller.swf in any case. Thus, all scripts must be done in HCIC_container.swf.
  
  I know it is confusing and it is difficult to explain, but if you look at the files it must make sense.
  
  ActionScripting is far from my point hard, so I'm definitely over my head here.
  
  Thanks for your help.

  Got my solution on another forum.

  http://www.ActionScript.org/forums/showthread.php3?t=146827

• Re: Need help for the restoration of the system

  Hi, I need help!

  I recently bought a Toshiba Satellite. I had some problems when trying to install some programs, some seem to fail. I wanted to clean the computer with system restore disc, only to find a record of 32-bit to a 64-bit computer.
  There is a repair of the setting system installed on the computer but it does not work, when I put it on disk, files, it cannot be opened.

  I can restore the system somehow repair; It must have been damaged by a virus. It should come with a big warning that the disk is not compatible!

  I have burned one day drive the first if I d just so you know! Any advice?

  Hello

  At first, I must say that you should tell us what model of laptop you have exactly.

  I put t know what cell phone you have and what you have with her, but in fact, it's that many laptops come with preinstalled OS 64-bit and 32-bit version on DVD.

  In this case, you must create own 64 bit preinstalled use Toshiba recovery media creator recovery DVDs. Alternatively, you can install 64-bit without DVD disk with HARD drive recovery option > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm
  Of course, this will not work if you didn't change the factory settings.
  Try if it will work for you.

  At the end I would say that what I wrote is detailed described in the document s user manuals but I presume that you didn t read it, right?

• Need help to turbo tax on my system

  need help to t tax on my computer

  CrystalBall © SEZ...

  TurboTax 2009 can not settle down because he thinks that the .NET Framework is not installed, even when it is
  http://blogs.msdn.com/astebner/archive/2010/01/26/9953883.aspx ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Help. my computer has been hi-jacked. someone, somewhere took control of my system

  Hello.

  According to me, an ex-girlfriend's and took my computer with a program activity secret journal.

  She is the only person with access to this computer in my house, but also of information network key, passwords, everything.

  is there a way to detect secret spy programs and remove them permanently. (note): I don't think that 'top' im administrator more.

  When I boot in safe mode, a user administrator account appears above my own Admin account.

  Hi Tom,
  Try the sequence of steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It provides simple instructions on how to remove malware from a computer. If you have any questions, just ask. I hope this helps you.
  Brian

• Need help with the recovery of the System Satellite L300-149

  Hello

  We have a Satellite L300-149.
  Was running really slowly then wanted to reset it to factory settings.

  Doesn't the "press F12 during startup, insert the disk in" etc etc BUT have a horrible feeling that I put a disc to which belonged in fact to a different Toshiba, we used to use a U300.
  'Give' was that the manual for the U300 is now on the desktop on the Satellite :-/

  I hope that this would not be a major problem BUT the F8 key is gone now it's impossible to connect to the internet.

  I looked online and read that the L300 sometimes doesn't come with a disc that the info is kept on a separate part of the disk hard hope so I could reset it back to settings to factory again but when I click on F2 on start up and go to the option to restore it, noting happens.

  Can someone please help?

  Hello

  Forget HARD drive recovery now
  You have recovered the system using another disc and it has been removed and the HARD recovery disk image files. If this option is NOT possible!

  You reason that the L300 and all other laptop does not come with recovery discs.
  The recovery disk must be created using the recovery disk Creator called preinstalled software. But it is also NOT possible because you deleted the preinstalled system and the files that are needed for this recovery disk are no longer available!

  But if everything is working properly except the WLan FN + F8 key, then I recommend you only install the Wlan driver. I think that the key does not work because the right WLan driver is not installed.

  I think that the Satellite L300-149 supports the smart WiFi Realtek RTL8187B.
  Then install the right driver Wlan you can find here:
  http://APS.toshiba-tro.de/WLAN/?page=downloads

• Need help with the control of time in labview

  Hello eveybody.

  In the image as an attachment, there is a vi that I did to control the amp.

  I give the amplitude value DBL to the amplifier as 50V or 60V and it's there on the amplifier.

  They problem is that I need to control the amplitude with the calendar. I like continious 50V for 5 sec, then peaking suddenly 100V for 1 second or 1msec and so on.

  What should I do?

  Any help...!

  Thank you adigator

  I find the solution and now I got what I thought...

  

• Need help, use the control Timer my application does not start

  Hello guys

  I have problems, follow the example signals and Slots, but when my application is running, it does not start.

  If I delete all the code that deals with the Timer control, it's working again, my theory is that the CustomTimer library does not stunts

  Can you help me?

  Thank you very much

  My guess is many people have followed this during the first startup, I certainly did and it worked for me.

  It's probably something simple, missed, without seeing your code it's going to be difficult to diagnose.

  My first advice is always to check the log and see if messages are coming that may be related.

• Need help after you insert the CMS system

  Hi on my site ive inserted a system of Cushy CMS. It all work that is not the problem. The problem is that my page is a mess now... The only thing ive addes is a code cms so im hoping that the solution is not difficult to do.

  There are three pages what is changed full.

  The home page

  http://www.vakantiewoningeninsuriname.nl/index.html

  The text column to the right is less moved. How is it possible to place this back?

  on http://www.Dorff.nl/ you can see how it was before I add the CMS.

  The next page is:

  http://www.vakantiewoningeninsuriname.nl/bezienswaardighedenparamaribo.html

  You can see that there is much more space between the head and the text. And you see that the text is not only the anymmore on the right side.

  This is how it should be:

  http://www.Dorff.nl/bezienswaardighedenparamaribo.html

  It goes the same for this page:

  http://www.vakantiewoningeninsuriname.nl/Prijzen.html

  And that's how what it takes:

  http://www.Dorff.nl/Prijzen.html

  Hope you can help, thank you for the research...

  Kind regards Brian

  braico wrote:

  Dear Jacqueline,

  Thank you for your reply,

  I'll try to explain again what is wrong. On my website, you see this page:

  http://www.vakantiewoningeninsuriname.nl/Prijzen.html

  Problem is the image below on the right side of the page instead of the left like the other pictures.

  On:

  http://www.Dorff.nl/Prijzen.html

  You can see what it should look like... Photos to the left and the text on the right. I don't know what happened when im adding the Cuschy CMS. Hope you can see what the problem is.

  You have the two last property on the wrapped page entries in the

  "one_half_last" when that

  must encapsulate the entry of details of each property individually. That is why the last image is more to the right.

  What I would do is remove the entries of two last property (images and text) on the page, copy the code from the entrance of the two property then paste it under twice, making your entries in four properties. Of course, you need to update images and details of the property as well.

  OR if you're good with the code alters entered two details latest properties are isloated in their own "one_half_last".

• I need help with a g4 pavilion operating system recovery

  Recently, I replaced the hard drive on my g4 pavilion laptop. The new hard drive doesn't do not have an operating system. I have no access to the old hard drive, but I got back up to an external memory. My question is that I'm able to use the files to restore the operating system, or do I have to order the recovery disks? OR do I have to buy the whole OS again?

  Thank you

  Alexandra

  You are the very welcome.

  First here is the link to order your laptop recovery media, where you decide to order recovery disks.

  Click on the link below and then click to expand the order recovery media line and then click on the blue button more downloads.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5148870

  Now, here's what you need to do to make your own plain version of W7 to install on your laptop by using the product key:

  Here is the link to the ISO from Microsoft W7 Home Premium 64 bit file.

  http://MSFT.digitalrivercontent.NET/win/X17-58997.ISO 2147483647 English Windows 7 Home Premium x 64 X 17 - 58997.iso

  Make sure you get all the 3. XX GB of the file to download.  On rare occasions, it reports full download, but you do not receive the entire file.

  After you download the above file, use your option ISO burn program for burning DVDs to burn the ISO on a DVD that the DVD is bootable.

  Burn the DVD at the speed of slow burning you can.

• Need help with the breakdown of the system

  I have a Toshiba laptop with Windows Vista, and my animal jumped on the keys.  He locks and there wouldn't let me connect you to Wiindows.  I did a launch startup repair, and he said that he could not repair automatically.  I then tried a restore of factory default software, but he will not do the last step.  I am running Windows now, but every time I try to do all the things I get corrupted file view.  Is there something I can do, or better, I'll take my laptop repair?  Thank you.

  Hello

   
  Some computers have Windows recovery environment preinstalled on the computer. You can access the Windows recovery environment, tapping on the F8 key several times during the start-up phase and enter the Windows recovery environment, and then perform the steps in the below link to see if the problem persists.
  http://support.Microsoft.com/kb/927392
   
  Hope this information helps.

• Need help on impdp via network_link no system, no application tables

  Hello
  
  I'm trying to impdp via non-system network_link, not application tables and saw the following errors:
  
  Current estimation using BLOCKS method...
  Treatment of DATABASE_EXPORT/SCHEMA/TABLE/TABLE_DATA object type
  ORA-39126: worker unexpected fatal worker error of $ MAIN. [GET_TABLE_DATA_OBJECTS]
  ORA-02041: customer database did not begin a transaction
  
  ORA-06512: at "SYS." DBMS_SYS_ERROR', line 86
  ORA-06512: at "SYS." "MAIN$ WORKER", line 8353
  
  -PL/SQL call stack-
  the line object
  serial number of handle
  body 0x629ba128 19208 package SYS. MAIN$ WORKER
  body 0x629ba128 8385 package SYS. MAIN$ WORKER
  body 0x629ba128 12748 package SYS. MAIN$ WORKER
  body 0x629ba128 4742 package SYS. MAIN$ WORKER
  body 0x629ba128 9110 package SYS. MAIN$ WORKER
  0x629ba128 body 1688 package SYS. MAIN$ WORKER
  0x6c54d1c8 anonymous block 2
  
  Work "SYSADM". "' IMP_USERS ' stopped because of the mistake at 12:01:39
  
  Here's my parfile:
  
  NETWORK_LINK = DBLINK
  FULL = Y
  PARALLEL = 8
  EXCLUDE = PATTERN: 'IN ('SYS', 'SYSTEM', 'OUTLN', 'PS', 'SYSADM', 'GENERAL', 'PEOPLE', 'DIVE', 'ORACLE_OCM', 'CSMIG', 'PSMON', 'PERFSTAT' '
  JOB_NAME = IMP_USERS
  
  Please let me know if you need more details than those provided above. the source is a GR 11, 2 on RHEL5 data 10204 on HP_UX traction.
  
  Published by: beef on February 10, 2011 08:35

  It seems that it might be a bug.

  Bug 10115400 - ORA-39126 when using expdp/impdp with network_link [10115400.8 ID]

  You can submit a Service request with the support of the Oracle.

• Need help with movie controls (specifically the reboot)

  Hi all

  Noob question, so bear with me.

  I have a site that loads a page with video playing on one of the pages.  I put it in place so that clicking on the button of the page starts the video and clicking on a button for a another page stops the video.

  However, instead of stop the video she just paused, so that when the user returns to the page with the video the video resumes where it left off, rather than restart.

  My site as a whole is a great movie clip, so each page is not loaded when we click a button - the content is just interpolated on the stage.

  Is it possible for me to have the control to stop the film playing (other buttons on the page) or to start playback of the movie (own page button) to have restart instead of the first image?

  Code for the start is really simple:

  content_mc.about_mc. MyVideo.Play ();

  and the judgment is:

  content_mc.about_mc. MyVideo.Stop ();

  Thank you.  I know I'm asking for the wrong thing because I left speechless Google results with what I ask, helps find the right way to do it is appreciated, even if I like a lot the way the site is designed so preferably not redo the whole site would be great!

  C.

  If you do not use a pause button so you can activate your flvplayback instance autoRewind property the flv file will restart from the beginning, whenever it stops:

  content_mc.about_mc. MyVideo.autoRewind = true;

• Need help with volume control

  I looked around the forums and found some ways quite complex to control the volume of a file being read. I'm new to LabView and I was wondering if I could get an example/explanation of how to simply control the volume of a sound file via a slider. I tried to use 'Sound exit Volume Set', but could not understand what the "task ID" should be, or whether it was still necessary.

  Noticed that I never joined the mod, but no matter since I realized that if the .wav file is large you probably want to read in chunks. The mod above should have the number of samples control back in there.

• Need help for the restoration of the system

  Somehow my husband has totally deleted my computer. I reinstalled windows and internet. I'm doing a system restore which dates back to September 1 (since it happened today the 6th), but it wont let me restore to that date. Is it because he deleted my system?

  Hello

  Yes.

  If you reinstalled the operating system, there is no restore points as the hard drive was wiped clean as part of the resettlement process.

  If you have lost data through that, try this free program to try to get it back.

  http://www.Piriform.com/Recuva

  See you soon.