Dell warranty and dealing with people who do NOT SPEAK ENGLISH

Similar Questions

• Share work with people who do not have Adobe Creative Suite reflow?

  I see a question which was published two years ago, but I was wondering if it was possible now to share my comp to reflow with someone who does not have the software. I tried to find a way to export a PDF, the HTML but does not export correctly. Someone knows a way to share my work of reflow with people who do not have Adobe Creative Suite

  Reflow is basically an HTML document, so if the HTML for export does not work, it doesn't look like it is set up right?

• If I created my iPad to the text can I communicate with someone who is not an apple product?  If yes where can I start the process?

  If I created my iPad to the text can I communicate with someone who is not an Apple product?  If so, where should I start this process. She is studying how to set up his tablet to the text for me. Is this possible?  Explicit detail please... I am new to this. Thank you.

  To be able to not text on an iPad Apple devices, you need an associated iPhone to the Apple ID, the iPad is using.

  Read the following support document SMS since it deals with sending SMS through continuity.

  Continuity allows you to connect your iPhone, iPad, iPod touch and Mac - Apple Support

  With continuity, all SMS and MMS text messages that you send and receive on your iPhone may also appear on your Mac, iPad, and iPod touch. You can also meet your contacts from any device is closer to you, including your iPad or Mac.

• Of EPSON printer driver dealing with CD printing is not installed

  Fantastic little printer and I want to continue to use it.

  I managed to install all the drivers for it, except one. When I try to print on a cd/dvd, I get the message "thedriver of printer EPSON The dealing with CD printing is not installed". I have been all over the internet, but all I found was a more recent version of programming Print CD that gives me the same message.

  I use a laptop Lenovo G505 with windows 8.

  Any pointers in the right direction for these drivers would be very appreciated :)

  Original title: "Epson R300/Windows 8."

  Hi Neil,

  Thanks for the reply.

  Please provide detailed information about the issue.

  You mentioned printer works very well as you are able to print on paper or printing on CD/DVD covers.

  Whenever you try to print on CD/DVD you get the message from is not installed dealing with EPSON The printer driver to print CD.

  You can check the link to fix the problem.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?infoType=FAQ&OID=29081&FOID=178014

  Note: Article is for Windows 7, but also applies to Windows 8.

  If the problem persists, I suggest you refer to the EPSON forum support.

  You can check out the link below to send your request to the support forum EPSON.

  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp

  I hope this helps. If you have any other questions, we will be happy to help you.

• How to make Garland dell p2715q and p2415q with macbook pro

  I bought 2 Dell montors, the P2715Q and the P2415Q, with DP in and drawers for chaining. I use the mini DP to DP of the cables provided with the monitors. They do not only mirrored between them and the Garland. I can, however, connect the two cables DP minis on ports 2 Thunderbolt on my MB Pro 13 "2015 Early and both monitors to display as independent observers in the display preferences, no problem. The only thing is that daisy chaining them does not work. Any suggestions or solutions?

  Early 2015 13 "Pro MB, 8 GB RAM, Core i5 2.9

  10.11.6 OSX

  Monitors: Dell P2715Q and P2415Q

  To my knowledge, OS X is the limit. He has never supported other than own Apple Thuderbolt poster chaining.  You can do a quick web search to see if it has changed, but this question has been around for years and I've never known anyone to get 1.2 DP chaining to work with something other than Apple monitors.

• How can I share my iMovie with people who have windows PC

  I recently did an iMove I would share with friends who have a PC instead of a Mac Windows.   The file is about 6 GB is size, and I want them to be able to watch the movie as a high resolution if possible.    How do I convert an iMovie into a format viewable windows and provide to them?   I have a MACBookPro using OS X Yosemite 10.10.5 version and my iMovie is version 10.1

  Create a video DVD and send it to them?

• Bought a new dell battery and still my laptop battery does not charge.

  Hello.

  I am using a Dell inspiron 1545 for about 3 years now and exactly after 2 years of my purchase, the battery has failed and it began to show me to replace the battery and always informed to contact me dell for a new battery.

  I took this to a lot of trouble, so I simply ignored the message and kept using my battery with my wired adapter. After 4-5 months of such uses, my battery has completely failed and does not give me even even a minute of backup, when I remove the power outlet. Then I realized the importance of a new battery and then bought a new battery from Dell.

  Its the same battery with the same features and also the same type family. After that I removed my faulty battery, I replaced my purchased new Dell battery and realized that my battery works fine. his load well, but at one point, it says "plugged in, but do not load" which is rare for a new battery, that is purchased new.

  

  This is what it looks like now once I removed the plug adapter and when I depend on the backup battery. It provides a backup, but I see a Mark exclamatory yellow next to her. Which I think should not be present. He also says "Low battery" when there are already some 99% battery left!

  I also followed a few steps online

  (1) update the BIOS for the last 2) followed by a few other steps such as uninstall the ACI battery in Device Manager and etc...

  I'd like to get this problem is solved. I use an adapter family PA-12, which is also replaced. So any help on resolving the issue would be appreciated.

  Thank you!

  Hey maxim. I have actually FIXED this month back, problem. and I want exactly help on it so that you can fix it yourself too...

  the problem that is the creation of your battery to display an exclamatory mark is your power settings.

  then follow these steps to get rid of this sign and a battery to work perfectly.

  1) click the icon of your battery (left click), you should see an option called "Power Options more' at the bottom of the pop-up window.

  Click on 'more power Options.

  (2) now, you will be taken to your control panel where you can see all of your power plans and under each plan, you will see an option called "Change plan settings"

  3) click on "Change plan settings" for your active power plan. Now you will be redirected to another window of Control Panel, where you can see two types of power options to get adjusted. in other words, when you battery is connected and when your battery is disconnected.

  (4) do not touch these options, simply click on 'Change power avancΘs' at the bottom left of this window. THIS IS THE AREA WHERE WE HAVE TO FIX!

  (5) after that you click "Change advanced power settings", you will see a POWER options window, go down and then you can see what is called "Stack" with a sign to the left. until it clicks.

  (6) now, you just change the levels for the following values

  --> Critical battery level (you can change it to 10%)

  ---> Low battery (you can change it at 20%)

  Now once who did, YOU will BE No. LONGER SEE THE EXCLAMATIVE MARK on YOUR STACK!

  So I hope it works!

  Answer me when you've managed to fix.

• How to select all of the people who are not in any team?

  Hello
  
  I have a nice SQL expression that gives me accordingly all the "AGENTS" (people) working in a TEAM (a team)
  
  Select one. "" AGENT_ID. "
  a."NAME" | ' ' || a.' first NAME' 'Name',
  c.libelle 'team ', he said.
  a."DATE_EMBAUCHE" "Hire Date"
  a."DATE_DEBAUCHE" «Date debauchery. "
  of the OBSERVATORY. "" AGENT. "
  b Observatoire.equipe_agents,
  c Observatoire.Equipe
  where a.agent_id = b.agent_id
  and b.equipe_id = c.equipe_id
  order by name
  
  Now, how to select all the agents who do NOT work in any 'TEAM' (team)?
  
  I tried but could not succeed!
  
  Thank you for your help.
  
  Christian

  Dave solutions use an outer join ((+) in the joints), which should bring back all the records of the agent, even if they do not exist in the equipe_agents table.

  Another approach would be to use a statement NOT EXISTS or NOT IN, for example

  SELECT   *
  FROM     agents a
  WHERE    NOT EXISTS (  SELECT   1
                         FROM     equipe_agents ea
                         WHERE    ea.agent_id = a.agent_id
                       )
  

• (Redirected) Backup and restore with Windows 10 could not be updated

  I received a message that I had to update Dell backup and restoration since I was in my first month trying Windows 10. Started the update, got about 1 - 1 1/2 minutes, then got an error message.

  Patch file failed:
  C:\Program Files (x 86) \Dell Backup and Recovery\QTtool Lite.exe

  Clicked OK, light timer counts down, but the progress bar would move not to give the impression, that he had won as a result of the above error so I stopped it. What is happening to others?

  Best of this post in the forum Windows 10 here:

  http://en.community.Dell.com/support-forums/software-OS/f/4997

  Bev.

• Portege 3500 - change HARD drive and deal with overheating CPU

  I recently bought a Portege 3500 without any support of discs etc. It doesn't have a CD or a floppy disk. It has 2 problems, I want to trouble.
  (a) HARD drive is obviously out because it is by clicking on me, and it presents a permanent red section during defragmentation.
  (b) the fans are at full power all the time, and the CPU is running slowly.

  (a) I had a new HARD drive that I reformatted on other laptops. I put a base Windows XP on this HARD drive and uploaded on my external that I attach to the Portege. I used "transfer... Assistant "to transfer files, folders, and settings to the new HARD drive but I don't know how to install the old Windows XP OS Tablet it." I have the product key of Microsoft for the operating system. Any suggestions would be helpful.

  (b) I believe that the transfer of heat from the CPU on the radiator is a failure, causing the processor to hot and therefore slows down. I already solved the same problem with a Dell by coating the top of the CPU with Artic Silver 5 paste. I cannot, however to get the CPU in the same Portege so I removed all the screws down. Does anyone know how to split the case without causing damage?

  Hello

  (a) Unfortunately, but I don t really know how you want to install the operating system without using the recovery CD or the windows CD.
  I searched a bit in this forum and found these messages on the installation of the OS on the Portege 3500:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=5926
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=15336&MessageID=55939

  See also this FAQ:
  http://support.toshiba-tro.de/KB0/TSB6101CA000ER02.htm

  (b) on the Portégé, you should find the power saver utility. This utility allows you to change the different modes of cooling and processing speed.
  In my opinion, you should also check if the fans are clean. Especially the dust and debris inside of the laptop is responsible for cooling not properly of the CPU and other parts.

  But if you want to know how to remove the covers so I would recommend checking this site. Maybe you'll find something useful.
  http://tech.irisvista.com/laptops/Toshiba4010/portege4010_1.htm

• Recognizing the Intrusions and dealing with Registry Hacks

  Just installed a copy of Vista Ultimate 64 bit and got it upward and running without problem for a couple of days.  Today, the Internet stopped briefly and then minutes later he did again.  Suspecting an intrusion, I checked the relationship between downloaded to downloaded packages.  I looked at simply, does not download music, videos or something like that, and I had been on during a few hours.  Download Download the report is about 1 / 3 and I could see a lot of activity on the upstream with all browser windows closed and no open programs (other than background processes).  If it has been updated, I would see a lot more activity on the downstream!  So I shut down the system, disconnected my cable modem and waited to get a new IP address.  I don't think it is normal to see such a ratio and wait at least to a minimum, 01:10 regarding the packages downloaded from the downloaded packages. My gut tells me that someone was in my system mucking around.

  Am not a fan of the Windows registry because it allows keys to be surreptitiously inserted that I have no permission - even as an administrator - change.  People can edit your registry to open doors for them to come and go and give them the ability to run a remote software that does not appear on your screen.  They can run processes that do not appear in the list of processes.  Even if you think about it, once they take away your ability to see and remove their keys, you have no real way to do much.

  If someone in your system hacks the registry to defeat your security, it is not like a virus. If no virus checker will never see it.  He just thinks you want that your system is set up this way.

  Why Microsoft is not dating a utility that would allow an administrator to reset the Windows registry to a set of default values such as Windows returns to a State where it would be if it were installed with all the security current updates and drivers for hardware on the Microsoft Update site.  All entries in registry and other customizations user would be wiped off the register. No backdoor open, download closed.  In my opinion, it takes a utility like that and I'm certainly not the first to come up with the idea.  What stops Microsoft to release something like that?

  I think you are misunderstanding the registry and what it does.  I could spend a few weeks teach you this topic, or you could get books and studies.  But to list some of your misconceptions:

  1. the registry may only be changed by you by using the registry editor, or a program you gave permission to run on your system.  There is no way an Internet connection can edit your registry database, or the data that flows over an Internet connection.

  2. just put something in the registry is no harm either.

  3. somehow the registry cleaning as you suggest would kill every program installed on the system.  Any software that does not come with Windows (think, Microsoft Office, updated Internet Explorer, software utility, everything that you install) would probably be nuked and killed by such a destructive restore.  If all the drivers you have downloaded directly from the manufacturer, or provided with the hardware you have installed after that you did this registry restore. No hacker could do the kind of damage this type of restore registry would do to your system.

  If you suspect that someone can enter your computer, trying to protect or restore the registry is absolutely the wrong way to stop.  This is what software firewalls, antivirus, anti-spyware, etc. are for.

  'J T Schwager' wrote in the new message: * e-mail address is removed from the privacy... *

  Just installed a copy of Vista Ultimate 64 bit and got it upward and running without problem for a couple of days.  Today, the Internet stopped briefly and then minutes later he did again.  Suspecting an intrusion, I checked the relationship between downloaded to downloaded packages.  I looked at simply, does not download music, videos or something like that, and I had been on during a few hours.  Download Download the report is about 1 / 3 and I could see a lot of activity on the upstream with all browser windows closed and no open programs (other than background processes).  If it has been updated, I would see a lot more activity on the downstream!  So I shut down the system, disconnected my cable modem and waited to get a new IP address.  I don't think it is normal to see such a ratio and wait at least to a minimum, 01:10 regarding the packages downloaded from the downloaded packages. My gut tells me that someone was in my system mucking around.

  Am not a fan of the Windows registry because it allows keys to be surreptitiously inserted that I have no permission - even as an administrator - change.  People can edit your registry to open doors for them to come and go and give them the ability to run a remote software that does not appear on your screen.  They can run processes that do not appear in the list of processes.  Even if you think about it, once they take away your ability to see and remove their keys, you have no real way to do much.

  If someone in your system hacks the registry to defeat your security, it is not like a virus. If no virus checker will never see it.  He just thinks you want that your system is set up this way.

  Why Microsoft is not dating a utility that would allow an administrator to reset the Windows registry to a set of default values such as Windows returns to a State where it would be if it were installed with all the security current updates and drivers for hardware on the Microsoft Update site.  All entries in registry and other customizations user would be wiped off the register. No backdoor open, download closed.  In my opinion, it takes a utility like that and I'm certainly not the first to come up with the idea.  What stops Microsoft to release something like that?

• How do I save a photo in PhotoShop and then share it with others who do not have Photoshop?

  I'm working on a logo for my company and I would like to share with others, but they do not have Photoshop.

  Save it as a jpg or gif, png or tiff.

• Migration to ESXi and dealing with the VMkernel changes

  We are running ESX 4.1 in our group, and with the release of 4.1u1, I wanted to migrate to ESXi. However, it is to be a little difficult because of changes in the service console.

  Because I can have is no longer 2 different gateways, I have to keep all the VMkernel traffic on the same bridge, my service previously ran on 10.157.188.x console, but my iSCSI traffic ran on 10.72.66.x.

  If I move all my VMkernels to 10.72.66.x, then VMware HA will not and I can't join the host to the cluster that has its service on the network 10.157.188.x consoles.

  How can I get around this?

  Hello

  We had a similar design, where we used a second NETWORK adapter for the NFS storage.

  The solution was to create the second VMKernel port on the host and tie it directly on the (non-routable) storage network

  As everything was on the same IP, no DG only required Beach and bonus was that the traffic of storage was always 100% secure and isolated.

• I installed on my desktop on 2 years of Adobe5 and am trying to learn to use the program. It's obsolete now, so I'll try to catch up and dealing with for and creative cloud application. I have problem activating CC trial/subscribe. Is there no no

  What is someone has a problem to update Adobe5 to creative cloud on their desktop with Window8?

  What problem do you have?

• I opened a new tab, but the boxes disappeared and comes with "the address is not valid.

  I opened a new tab and it used to show my recent history in about 12 boxes but now I get this:

  "The address is not valid

  The URL is not valid and cannot be loaded.

  Oh dear.

  Unfortunetly, you'll have to do a clean reinstall of firefox.

  https://www.Mozilla.org/en-GB/Firefox/new/

  Don't forget to restart your PC inbetween facilities

  Good luck