Death of slow performance in Windows 8 operating system host with VMWare 9.0.2

Similar Questions

• mutex slow performance in windows xp on the host ESX 5 prompt

  I've done a few consumer casual producer marks written in C with visual studio 2005 on dual core 2 ghz cpu, with processor type and identical win xp professional o.s., it seems to me on ESX, execution mutex, events and corresponding waitforsingleobject is 1/10th to 1/2 the speed on the physical machine, Windows 7 instead the performance is about half of the corresponding physical machine I was wondering if anyone else noticed, this is perhaps due to how mutex/criticism sections/events/semaphores are emulated in the ESX binary translation, there are all the settings of windows xp 32 bits comments under ESX 5 to allow especially stimulate the sync speed of process/thread to make it similar to a physical machine may?

  I am attaching a small test project for vs 2005 in case anyone could take the trouble to try and compare the pure speed of physical synchronization primitives and ESX especially if in win xp there is a penalty of macroscopic speed or maybe I did something wrong as I ran the test on an overloaded perhaps ESX.

  gf111 wrote:

  Is it possible to wake up another process in win xp without incurring TPR registry bashing?

  I do not know.  It is not clear to me why Windows wants to change the TPR in the first place.  The TPR is to block external interruptions, and I see not why Windows would change the external interrupts are blocked, according to what level process user is active.

  I noticed that windows 7 synchronization is much faster on the same ESX with FlexPriority probably not activated, likely due to 'Lazy TPR', which I believe has been implemented in o.s. later than xp, so I guess that the more realistic prospect is to go with win 7, given I don't think that in my particular environment , I'm working on they would be willing to risk life and limb with potentially unstable FlexPriority bios patcher, has taken the fact that xp is end of life taken into charge anyway, but thanks for giving me a clue what may happen anyway.

  Windows XP 64-bit is another option.  He always denigrated on the TPR, but uses instead of MMIO CR8. (AMD hotfix did the same thing with an ISA AMD extension that allows the code to 32-bit access CR8.)

  Note also that FlexPriority is not a panacea.  It can reduce the cost of a TPR of 2000 update ~ cycles to ~ 400 cycles, but it is still far from what it costs in native mode, which is of ~ 2 cycles.

  Binary translation, TPR updates are rather cheap, but BT has its own performance issues.

  Your Windows XP guest running with binary translation or hardware-assisted virtualization?  You can check the file for 'HV Settings' vmware.log know.

• Apparent compromise Windows XP operating system files

  During a scan, antiviral regular which was initiated by the provider of the antiviral software, the scan did not work properly (i.e., it is still indicating that the scan is in progress, but nothing happens - no status progress which is now 50 + hours).  Contact the vendor of the antiviral software, they gave me the steps to perform a disk cleanup and then a reboot of the mode without failure followed by steps to remove TEMP files.  At halfway through the disk cleanup process, a pop-up window has stated that: "Windows - files required for Windows File Protection is running properly have been replaced by unrecognized versions.»  To maintain system stability, Windows must restore the original versions of these files.  Insert your Windows XP Professional Service Pack 3 CD now. "The Windows disks have not inserted according to the instructions, but instead, I contacted the antiviral software vendor to make sure that there is no unintended consequence.  The software provider antiviral indicated that Microsoft should be contacted as there can be some files that have been compromised that stopped the disk cleanup.  Windows XP (version 2005) operating system was pre-installed by the company of Toshiba laptop.  Question: I should restart the disk cleanup process as described by the antiviral software provider, and if there is another popup window indicating the information as mentioned above, service pack of Windows XP CD should be inserted?  Note: I was told Toshiba CD provided by them for the laptop contains the Windows XP operating system software.  The two provided Toshiba CD entitled, "Recovery and Applications/drivers DVD Satellite A100/A105 Series."  Question: Are there possible negative conseguences because the provided CD/DVDs have possible applications and drivers on them?  Thank you.

  Friend Software

  Hello

  · What is the name of the antiviral software that you use to run the virus scan?

  · You have security software installed on your computer?

  Check out the link that contains information about what is protection of files below. Link: Description of the Windows File Protection feature: http://support.microsoft.com/kb/222193

  1. I suggest to run the auditor of system files on the computer, you can check the link below: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  2. during the file system check scan if you are prompted to insert a CD Windows XP SP then you can follow the steps from the link below:http://support.microsoft.com/kb/900910

  3. once the Analysis System File Checker is complete. You can run Disk Cleanup.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Do not open programs after installing Windows update operating system Windows Vista

  Original title: MS Office programs do not open after installation of Windows update to Windows Vista operating system

  After having decided to install the Windows Update my computer told me was available all my software as my programs MS Offfice is no longer open.  I don't know what to do.  The only thing that still works is the Windows Media Player.  I can't open Word or Excel, I can't access my photos.  Open Internet Explorer is like a weird nightmare but I am able to access the Internet.  I tried reinstalling my MS Office software, which did not work.  I have no idea what to do to solve the problem, but I need my computer back. It was good except for its slow, when I open certain programs, now I can't access something.  Any ideas what I should do to correct the nightmare?

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For questions of office:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

   

  Theywill help you with your office questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Why I can't install iTunes on my laptop with the Window 10 operating system

  Why I can't install iTunes on my labtop with Window 10 operating system

  Have you downloaded the latest iTunes from here and correct version

  https://www.Apple.com/iTunes/

  and then run the downloaded installer.

• Desktop HP HPE h9-1150 Phoenix: can you do a update the BIOS of Windows 8 while on a Windows 10 operating system?

  As indicated in the title, you can do a BIOS in Windows 8 update while on a Windows 10 operating system?

  I have a Phoenix desktop h9-1150 and am trying to install a new GPU GTX970. There is no updated BIOS for Windows 10 at this time, but there is an update of my current BIOS 7.07 for Windows 8 OS. Can I do that Windows 8 updated safely?

  Normally the flasher will check to verify the operating system, but I can't on this one.  It does not separate out ROM file, even if it does not check if the operating system you can always extract the file BIOS and flash BACK.  I would try it first in windows.  It will tell you if there is a control in place.

• Re: Serial number down would work with the other Windows Vista operating system

  First of all sorry for my English.
  I have one question.

  My hard drive is broken with my recovery partition.
  If I download windows vista and install the system with my original serial number on the laptop, this will work or should I activate it after installation.

  I hope it's the same number that the front is installed on my first installation.

  Hello Marcin

  I doubt that the serial number that is placed at the bottom of the device works with another Windows Vista operating system. But it s worth a try
  You could test it I heard it's very rare cases it was possible

  In any case, if your HARD disk is damaged and it of not possible to create a recovery DVD using recovery software Toshiba disc creator, then you must contact the ASP in your country for assistance.

  If the warranty is valid the HARD drive should be replaced just for free. If you need only the recovery DVDs, then you can order it here:

  https://backupmedia.Toshiba.EU/landing.aspx

  Concerning

• The Windows Vista operating system on dv9000 was arrested.

  The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS.

  How can I get my BONES restored without having to buy a new one?

  lbwhorms wrote:

  The Windows Vista operating system on my laptop dv9000 stopped by Microsoft citing an expired licence. It is preinstalled by HP OS.

  How can I get my BONES restored without having to buy a new one?

  You may need to contact HP in your region or Microsoft by phone.

  If he please go through these papers & try the above first steps:

  Activation of Windows Vista operating system

  You may be prompted to activate Windows Vista on a computer on which Windows Vista has already been activated by a license in Volume or OEM installation

  Concerning

  Visruth

• Is there a practice of the Windows Server operating system environment?

  I'm looking to get some practice with the Windows Server operating system (2008 or other).  I came across the downloadable 180 trial period, but I don't mean to create a true server temporarily.  I'm looking to be able to have a completely 'virtual world' where I can actually add devices and simulate connect with different computers, etc.  I want to create an environment of virtual server completely, not the 180-day trial period where I create an environment that can have real computers to connect to it.  Such a thing exists?

  For example, I used a program called Packet Tracer that allows me to simulate the addition of routers, switches and high-end devices to create a whole network of Physics in a virtual environment.  I can configure devices with IP address and all that I can learn how to build a physical network.  I would like to do with the operating system Windows Server if possible.

  Thank you.

  Hello

  It would be preferable to repost the question to the Forum Windows Server help.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Setting up a Test environment

  http://TechNet.Microsoft.com/en-us/library/cc747673 (v = WS.10) .aspx

• How can I register my Windows 7 operating system?

  How can I register my Windows 7 operating system?

  Thanks, P.B.Mohan

  Windows Update has nothing to do with it. This post here instead, questions please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I need the drivers to scan for a HP Scanjet 2300c for a Windows 7 operating system.

  I need the drivers to scan for a HP Scanjet 2300c for a Windows 7 operating system or compatible driver.

  Hello.

  According to HP, they offer no drivers for Windows 7, but in many cases the driver for Vista works on Win 7, then you can try this. If you have 64-bit Windows 7, then download Vista(64-bit), if you have 32-bit Windows 7, download Vista.

  The drivers can be found here.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=no&cc=no&prodNameId=73502&TaskID=135&prodTypeId=15179&prodSeriesId=73500&lang=no&cc=no

• What is hp psc 1355 all-in-one printer scanner copier compatible to be used in the WINDOWS XP operating system?

  I have a hp type copier printer scanner hp 1355. I need a driver (software) for this.  If the HP all-in-one device is not suitable for use on WINDOWS XP, is it possible to use hp 1355 in the WINDOWS XP operating system? Thanks FOR YOUR HELP.

  Hey Fed-Up-with-HP,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-23606-3&cc=US&DLC=en&LC=en&os=228&Product=306898&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-23606-3&cc=US&DLC=en&LC=en&os=228&Product=306898&sw_lang=

  10. run the download to reinstall the printer

• I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  I have photos I want to decrease the dpi on but can not understand how with the Gallery Windows. I have Windows Vista operating system.

  ===============================================
  You can resize a picture in WLPG but if you want to change the .dpi you
  need a different application.

  Information about resizing...
  Right-click on one or more selected inches... Choose... "Resize" in the menu.
  Choose a format, access a folder to save in the left click the ' resize and
  Save "button. (I suggest that you save the photos resized in a new folder
  to prevent the replacement (replacement) the originals)

  Take a look at the following link:

  Resizing Photos in Windows Live Photo Gallery
  http://blogs.msdn.com/PIX/archive/2007/11/30/resizing-photos-in-Windows-Live-Photo-Gallery.aspx

  In addition, the free software IrfanView can change dpi. Simply open a photo in IrfanView
  and go... Image / information. Enter the resolution you want in the resolution
  fields and on the left, click change. Then go to... File / save as... and save
  your photo altered with a new name.

  IrfanView
  http://www.software.com/IrfanView
  (Download plugins too)
  http://www.software.com/IrfanView-plugin

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I am trying to add itunes to an old computer for my kids. It has the windows xp operating system. problem of Setup Windows how can I solve the problem?

  I am trying to add itunes to an old computer for my kids. It has the windows xp operating system.  When I try to install itunes, I get an error message that says: I'm having problems with my windows installer.  I don't have an existing copy of itunes on the computer that would be a new installation.   How can I solve the problem?  I have a new computer with windows 7 and had no problem with installation on it.

  If you can not receive answers that will solve your problem, I would suggest that repost you to...

  Cummunities to Support Apple - itunes for Windows:

  https://discussions.Apple.com/community/iTunes/itunes_for_windows

• Hello. Can you help me get my built in webcam doesn't work on my Advent laptop with windows Vista operating system thanks

  Hello. I have a very nice laptop Advent and would love to get the built in Webcam work. Can you help me please? I have the windows Vista operating system. Thank you jeremy in Great Britain

  PS my grade o level B in computer science from Cambridge arriving 1984 useful! Thank you

  Hi Jeremy,.

  1. what happens when you try to access the webcam?

  2. have you updated the software and drivers for the webcam?

  You can check if the webcam is detected in Device Manager and also try to update the drivers.

  a.Click Start and type device manager in start search and press ENTER.

  b. in Device Manager check if the Webcam is listed.

  c. right click on the webcam and try to update the drivers.

  For more information, you can consult the following article:

  Updated a hardware driver that is not working properly

  You can also see the laptop manual to check if the computer manufacturer has provided a software for visualization of the webcam on your computer. You can also ask advent and are looking for the same thing.

  Support of advent

  Hope this information is useful.