Debug the invalid token

Similar Questions

• Debug the invalid token (date OK)

  Hello

  I'm trying to get my debug token to work.

  I created & installed my token in accordance with the instructions provided in this article. However, on my PlayBook, debugging token appears as invalid (' Valid: No. ").

  I checked the date on my PC and my PlayBook (I even tried the PlayBook setting a few days in advance): they are both OK. Also, I used blackberry-debugtokenrequest-check and he didn't tell me something unusual no more.

  So, what could cause this problem?

  Are you using the PIN exactly as there are shown on the PlayBook (do not convert this number to hex)?  The number would already be in hexadecimal.

  The date on the PlayBook should be synchronized with your PC.  If the date of the PlayBook is prior to the date of creation of a token of debugging or 30 days after the time of creation of a token of debugging, it will be invalid.

  Can you confirm these two?

• author of the 881 failure application does not match the author token of debugging

  Hello

  I can't launch my app Android of Eclipse for the BlackBerry PlayBook.

  Error:

  Impossible to deploy the project MYPROJECT
  Info: Send request: install
  Info: Action: install
  Info: File size: 1076852
  Info: installation...
  Info: Treatment 1076852 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  Thank you

  Delete the special character of the author fixed the issue.

• Is unable to connect/add the host to the CR - error: another error occurred at line number 7, not well-formed (invalid token)

  Hello!

  Having a problem with a server ESX 3.5 and VC2.5. Two days ago it became (not answer) in VC and I could not reconnect. Using VI client I can connect directly to the host. I ping the ESX other EWX hosts and to the client with VC.

  I tried mgmt-vmware restart and restart av vpxa. A restart of the ESX host has not helped.

  I have her disconnect the ESX and when trying to connect, I get the Connection Wizard, but when you add the server name and root I get an error saying:

  General error: another error at line 7 number, not well-formed (invalid token) and cannot continue.

  I saw another discussion in the forum saying ban the CDP but that did not help.

  After removing the server ESX of VC, I'm trying to add hos, but run into the same error. I see no particular error in newspaper except errors in certificates, but I'm not sure that that's about it.

  It's one of the things that I read in the newspaper about the VC client:

  Unexpected error connecting host host3.kun.local: incomplete header received

  GetChanges failed on the host /vpx/host/#7863 /: vim.fault.NoHost

  Set the error code of connection (-2) for the host host3.kun.local

  Anyone with any ideas what to look for?

  I'll try to remove vpxa and vpxauser # rpm - e Vmware-vpxa and # userdel vpxuser and see what happens.

  Carpet

  That's good news, glad to hear that the problem has been resolved.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!

• "invalid token" error when recording account synchronization; No email

  Hello

  I'm trying to set up a firefox sync account. When I submit the application for sign up / register my account I get a red box that says "Invalid Token" and the verification message never happens.

  I checked the email address works and that it is not going to spam.

  I noticed stuff like that in the newspaper (on about: sync-log) which seems relevant:

  1415409124817 Status.service Sync.Status DEBUG: success.status_ok = > success.status_ok
  {1415409127874 startVerifiedCheck FirefoxAccounts DEBUG {"email": "XXX"}}
  1415409127875 entry pollEmailStatus FirefoxAccounts DEBUG: start
  1415409128102 FirefoxAccounts ERROR getting/recovery_email/status: {'code': 401, "errno": 110, 'error': 'Unauthorized', 'message': 'in the signature of the request invalid authentication token', 'info' ': 'https://github.com/mozilla/fxa-auth-server/blob/master/docs/api.md#response-format' "}
  1415409128417 FirefoxAccounts ERROR error display/recovery_email/resend_code: {'code': 401, "errno": 110, 'error': 'Unauthorized', 'message': 'in the signature of the request invalid authentication token', 'info' ":"https://github.com/mozilla/fxa-auth-server/blob/master/docs/api.md#response-format""}
  1415409129545 Status.service Sync.Status DEBUG: success.status_ok = > success.status_ok
  1415409129546 Sync.Service DEBUG User-Agent: Firefox/33.0.3 FxSync/1.35.0.20141105223254.

  I'm running on Fedora 17 64-bit.

  Any help is much appreciated and happy to provide any additional information.

  Thank you

  ~ ray

  I got it with a different e-mail (thanks for all the help). No idea why he dislikes firefoxsync AT ray.interthingy.net

• Trying to do a simple REST, the security token error installation

  I'm trying to put in place a series of calls to API using c# .net. I have combed through the documents of installation, download the sample code from Github and contacted the support of Eloqua, but I can't seem to shake this same error:

  Eloqua security

  A security token that is associated with your session became invalid. This can happen if you open multiple instances of Eloqua, in different browser windows or tabs and then log out of one of these bodies. Please either close this window or tab or click here to log in again.

  I checked with Eloqua to make sure that my user name is configured to perform API calls. Now, I'm just trying to make an API call. Finally, I would like to add contacts, send emails and possibly to other activities through the API fires from a web application. I don't know if it's important, but I noticed that all of the code is a client application, not a web application. Is it possible to make API calls in code-behind to a .aspx page?

  The debug error I get is:

  System.Xml.XmlException: ' > ' is an unexpected token. The expected token ' "' or"'. " Line 3, position 62.

  This error occurs because the answer is the above HTML error message.

  Here's the code I'm running. It fires on a Page_Load handler on a .aspx page that compiles:

  var client = new Eloqua.Api.Rest.ClientLibrary. Customer (Instance, UserId, UserPass, 'https://secure.eloqua.com/API/1.0/');

  int emailId = 1;

  Eloqua.Api.Rest.ClientLibrary.Models.Assets.Emails. email email = customer. Assets.Email.Get (emailId);

  Response.Write (e-mail. (ToString());

  From: EloquaClient/Client.cs:

  public Customer (string site, user string , string password, string baseUrl)

  {

  BaseClient = new BaseClient(site, user, password, baseUrl);

  }

  From: EloquaClient/BaseClient.cs:

  public BaseClient (string site, user string , string password, string baseUrl)

  {

  Client = new RestClient

  {

  BaseUrl = baseUrl,

  Authenticator = new HttpBasicAuthenticator(site + '-' + user, password)

  };

  Client.AddHandler ("text/plain", new JsonDeserializer());

  }

  public T get < T > (int id, depth depth = depthletter) where T: RestObject, new)

  {

  var point = new {id = id} T;

  var request = Request. Get (request. ) Type of. Get, item);

  return Run < T > (request);

  }

  From: EloquaClient/Request.cs:

  internal public static RestRequest Get (Type , type, RestObject restObj)

  {

  restObj.type = restObj.Type;

  var request = new RestRequest

  {

  RequestFormat DataFormat=. JSON

  };

  switch (type)

  {

  case The type. Download:

  request. Method = method. GET;

  request. Resources = restObj.Uri + ' / ' + restObj.id;

  Break;

  case The type. Put:

  request. Method = method. PUT;

  request. Resources = restObj.Uri + ' / ' + restObj.id;

  request. AddBody (restObj);

  Break;

  case The type. Publish:

  request. Method = method. POST;

  request. Resources = restObj.Uri;

  request. AddBody (restObj);

  Break;

  case The type. Delete:

  request. Method = method. DELETE;

  request. Resources = restObj.Uri + ' / ' + restObj.id;

  Break;

  case The type. Search:

  request. Method = method. GET;

  var resource = new StringBuilder(100);

  resources. Append (restObj.Uri);

  if (restObj.id! = null & & restObj.id > 0)

  {

  resources. Append ("/" + restObj.id);

  } else

  {

  resources. Append ("s"); / / pluralize endpoint

  }

  var searchObj is restObj as ISearchable;.

  resources. Append ('? ') Search =" + searchObj.searchTerm +.

  "& count =" + searchObj.pageSize +.

  '& page =' + searchObj.page +.

  "& depth =" + restObj.depth

  );

  request. Resources = resource. ToString();

  Break;

  default:

  throw new NotSupportedException (type. (ToString());

  }

  return request;

  }

  From: EloquaClient/BaseClient.cs:

  internal T run < T > (applicationIRestRequest ) where T: ( new)

  {

  Answer IRestResponse< T > = Client.Execute < T > (request);

  if (answer. ResponseStatus! ResponseStatus=. Completed)

  {

  This is where it is throwing this error:

  ' > ' is an unexpected token. The expected token ' "' or"'. " Line 3, position 62.

  response to throw . ErrorException;

  }

  response to return . Data;

  }

  
  

  No idea where the code is a failure and how can I get this (supposedly) simple API call to return a value instead of a security token error?

  
  

  Thanks in advance.

  Nick
  

  Hi Fred,.

  I have cleared my cookies and unfortunately it does not solve the problem. Frank Shih to Eloqua stressed that endpoint was wrong ('REST1.0 ' rather than 'secure.eloqua.com/API/1.0' secure.eloqua.com/API/). I fixed who and receive is no longer the security token error. Now, I get a new error, but I'll make another post for that to keep things organized.

  Thank you.

  Nick

• Not well-formed (invalid token)

  Dear experts,

  During the development of my script - I can't use the ESTK on my system - with changing in EditPad (UTF-8 file) and then by running it in FM - 12, I received the message:

  Script error:
  Error message: not well formed (invalid token)
  Script, line #: E:\_DDDprojects\FM-biblio\test-scripts\t-read-formatted.jsx, 6

  Hack a lot, by removing the initial comment lines, convert the page file Windows return code and then again in UTF - 8 the error persists.

  I then don't run the script in ETSK on the pc of my wife (who is very slow, but a standard installation of Windows 7 x 32) - no problem at all. I saved the script and I went back to my system: problem was gone!

  But now I have the same error with another script. The really strange thing is this: the reported line is always 6, even if I delete (for the time beeing) irreleant lines or such insert at the beginning.

  More strange things. My script is growing in the project I mentioned more than once now cretates error when starting it.

  Script error:
  Error message: character conversion error
  Script, line #: H:\Adobe\framemaker.12en\AdobeFrameMaker12\10, 0

  This message itself is rubbish: the loaded script is E:\_DDDprojects\FM-biblio\escript\FM-biblio.jsx...

  Well at first I'll restart Windows and then look at this again once.

  Well, it turns out that a jsx file should not contain umlauts if it is coded in cp 1252 (Windows).

  var menuRes1 =   {en: "Resolve temp. citations",
                    de: "Temp. zitate auflösen"};
  

  You will get very strange error messages that you may not
  -Error message: unfinished string constant
  Script, line #: E:\_DDDprojects\FM-biblio\test-scripts\t-menu-setup.jsx, 31 (line 01 in the example above).
  -No definition found in the script for the function 'Command.
  Script: "E:\_DDDprojects\FM-biblio\test-scripts\t-menu-setup.jsx."

  Even if you don't have a real error in the script.

  Therefore, these script files must be UTF-8

  And sorry, in my first post on this topic of the first quoted error was a "a serious fault of me' (to quote Shakespeare):

  Not well-formed (invalid token)

  has been the result of not opening a jsx file, but a FrameMaker file...

  My wife is absolutely right when she says: often, you are to quickly with your reaction.

  The conclusion to my second point is this:
  at least the number of character is not allowed in script comments, although it is encoded in UTF - 8. How do you know what else is not allowed - and what of string constants?

• Extension Manager CS4 invalid token

  Hi guys, I started to get these 'invalid token in XManConfig.xml values' messages when you try to do something in the extensions Manager. The button 'install' of extension is dimmed and does not show Photoshop CS4 and Illustrator CS4 that we have installed. I tried uninstalling and reinstalling Dreamweaver, but the message is still there. Does anyone know what it is? Thank you.

  Thanks for the reply bgupta16, went to the IT dept who rebuilt my profile because there are questions "paths/redirect", which seems to have fixed.

• VCB: Another error occurred: at line number 7, not well formed (invalid token)

  I get the error message:

  2009-06-12 17:10:00.795 "vcbMounter" error of 2284 Error: Another errorencountered: line number 7, not well formed (invalid token)

  When I use the vcbMounter.exe (the same with vcbVmName.exe) of the VCB Proxy with the option "-a name: vm - name", since last week.

  With "- an ipaddr:vm - name ' it works well. We did not updates or upgrades at this time.

  Maybe a problem with a special character in the name or description of a virtual machine, but I can't find it.

  In the Victoria Cross are more than 1000 VM. Can anyone give me a tip how to find this character, or is there a differnet solution?

  Thank you very much

  Guenter

  Hello

  If you have a special character in the vmname, try with escape character.

  -@m!t

• Research in the string token.

  Hello world

  I was wondering if there is any VI that makes the function of finds a particular substring in a string and a Boolean value (True / False) as output. If found, to give a real. Cannot be found, give a fake.

  Thank you! ~

  You will not receive directly a BOOLEAN output, but for those kinds of requirements, there are different functions available and each of these functions is called 'Delay of game' (or 'offset last game' in some functions).

  Now based on the requirement, you can select any one of the following:

  1. chain of research/Split: (easiest and fastest function)

  

  2. model of correspondence: (powerful and slower)

  

  3. regular expression matching: (most powerful and slower)

  

  Now, when you use any of these functions if this particular exit 'Delay of game' (or 'offset last game' in certain functions) gives '-1' (negative 1), this means that the substring (token) is not found in the main chain, so a simple check will give you, your desired features.»

• Name of the invalid OLE DB provider specified

  PC with windows XP.

  The user is trying to connect to a database program.  When he enters his user name and password on the database, it gets the following error:

  Connection error

  Audit of security do not.  Unable to connect to the database!

  Error:

  Name of the invalid specified OLE DB provider.

  Other users can connect to the network and conect to the database.  This same user can connect to the database if another user is connected to the network.

  All users have the same rights.

  I tried deletion and recreation but it still errors.

  Any suggestions?

  Hello

  1. is your computer connected to a domain?

  2 of database are. what program you referring?

  I suggest you to send your query to the MSDN forums for assistance.

  Here is the link: http://social.msdn.microsoft.com/forums/en-us/categories

  Hope this information is useful.

• EPrint jobs will be rejected with the invalid sender. But the sender is valid and used before.

  My jobs eprint will be rejected with the invalid sender. But the sender is an email address, I finally used in February without problem. I tried to remove the address, record and create again. No difference.
  If I leave everything to send to my printer, it works. But I'm not interested, so I changed it back, and I get the same error again.
  Someone at - it s\u0026 this?

  Hello Kim62,

  The only way I know to do this is to pass the senders allowed in all and leave it there.  If you are worried that this will violate your security, I understand, but something to keep in mind is that the only people who know the e-mail address of printers are people you trust give enough for him too.  If I hear another way to get around this, I'll post here for you.

• New hard drive gets the INVALID disc Windows 7 64 bit upgrade product key!

  I installed Windows 7 Home Premium and within 24 hours, my hard drive is dead. I replaced the hard drive and reinstalling Windows 7 Home Premium with 64-bit disc. Everything went well until the time of the entry of the product key. When I typed in the key of this program returned an INVALID KEY message and instructed me to check and retype the key, I did. Product key message invalid was repeated. I have not installed a previous version of windows before you reinstall 7, and the installation program never asked me to check my right to use the upgraded version (Yes, I used the CUSTOM install method).

  The INVALID PRODUCT KEY message due to the absence of an earlier version of windows is detected on the new hard drive? I need to install my OLD version of windows before proceeding with Windows 7, can I? Please help me understand what is happening with this PC. I convinced my sister to be upgraded because Windows 7 is SO much in my PC, so that she bought the upgrade disc and tried for a week to get its system works as well as mine has inlaw for several months. I have not heard of someone having this much trouble with the upgrade to Windows 7.

  Product keys don't care equipment. They only care about the version of Windows that you are trying to install. (However, you cannot validate a facility later but this is another topic).

  If your product key is rejected, then you are two typing errors or you are using a key that does not match the DVD that you are using. This could happen if you use a MS Office key for a Windows installation to a key of Windows 7 OEM for a DVD retail of Windows 7.

• End of the invalid Document

  Hello

  Trying to use the bulk of push BIS in production mode, I get the error of the object. I have however was to change the identification information provided by my assessment of credentials of production.

  Why would this error happen?

  Apparently, the cause of the "invalid Document end" is due to a lack of response from the server to Push Blackberry...

  Considering that the SERVICE is DOWN!

  Hope that they solve the problem quickly.

• problem with debugging the code

  IAM using JDE 4.6. I used to debug the code until yesterday. But suddenly, I couldn't able to debug the code. When I insert a debugger, it does'nt stop there during execution. If I try inserting the debugger during execution, an error pops up "no executable code to the selected line. Help, please.

  What happens to me when I am debugging the device on the Sim Card and the code for the device or the Sim Card does not exactly match the JDE.  Recompilation and the commissioning the device or the Sim Card with the new code usually fixes it.  Give it a try.