Resource conflict: PXI-1000b NI PXI-8106 & NI-8420/2

Similar Questions

• On the PXI-8106 serial port connection problem

  Currently, I am trying to connect to the serial port on the PXI-8106 via RS232 module. However, when I try to run the Test VI opened for COM1 MAX (PXI Remote) running on a PC, I received an error like below:

  Returns the status code: 0xBFFF00A8

  Name of the State: VI_ERROR_NPERMISSION

  Access to the resource or the remote machine is denied. This is due to the lack of sufficient privileges for the current user or the machine.

  Right now I'm just a just loopback test to ensure that the interface for device is working before you start my labview code. I'm not sure what the problem is exactly, if it has to do with the PXI or PC. Could you please suggest a few solutions to this topic?

  Thank you.

  I managed to understand. It did not work on the right platform.

• PXI-8106 driver

  Hello

  I need to install windows 7 in a PXI-8106 module. I found this link with the XP/Vista drivers:

  http://digital.NI.com/public.nsf/allkb/E4503CC7E8BB41BA86256F7F006CBE8D

  That I can install it on windows 7?

  Thank you

  Juan

  Hello

  (1) DEV C801 = map interface GPIB controller

  Should be solved by installing the GPIB drivers:
  http://www.NI.com/download/NI-488.2-3.1.2/4360/en/

  (2) hardware ID ACPI\NIC7019

  Should be solved by installing the driver at the bottom of this post:
  http://forums.NI.com/T5/PXI/update-PXI-8110-image-to-Windows-7/TD-p/1127928

  (3) hardware provider 1093 = ID NOR and DEV B 71, 9

  I'm not 100% sure, but this can be resolved by installing this driver:

  http://www.NI.com/download/PXI-platform-services-3.2.3/4186/en/

• Upgrading memory on the PXI-8105 controllers and PXI-8106

  Hello

  I've recently upgraded the memory of three PXIs; one with a PXI-8105 controller and two with the PXI-8106 controllers.  Both the 8105 and 8105 can have a maximum of 4 GB (2x2gb) DDR2-677 (PC2-5300) (see links below).  However, on the three systems, both the BIOS and the o/s only see 3.3 GB.  No idea why this might be the case?

  I tried to Flash the BIOS (v1.4 on the two PXIs), but without success.

  We use COTS memory (i.e. not purchased NOR) but I would be badly pushed to believe it is the cause of the problem.

  Thank you.

  Links;

  • The PXI-8105 http://sine.ni.com/nips/cds/view/p/lang/en/nid/202630 max memory capacity
  • The PXI-8106, http://sine.ni.com/nips/cds/view/p/lang/en/nid/203442 max memory capacity
  • Update BIOS page: http://digital.ni.com/public.nsf/allkb/9C9362590B05CD6E86256B270082164A

  I don't know about the BIOS reports less than 4 GB. Here's a blog post that best describes what I wanted.

• How to access memory on the PXI-8106 controller

  I am able to write and read the brief on PXI-8106 using FTP functions in labview. But I'm not able to find a way to delete data that I wrote (PXI-8106) memory. Y at - it an easy way to do it.

  Thank you

  Kitenge

  Kitenge,

  Is this something you want? - Delete the file from the server FTP using the Internet Toolbox

• PXI-8106 RT

  Hey, evry.

  I just got controller PXI - 8106 RT and wanted, as usual, "thin" with Firstware, but...

  .. are "F4" key during startup - nothing happened!

  Then... Should there be a Firstware on RT controller?

  ... Not a word "combat manual, of the by..."

  Thanx in ADV

  Ok thank you!

• Single-point PXI 8106 timed performance material

  Hello

  I'm potentially interested in buying a PXI-8106 module for my application of servo motor control. I would like to know that single-point timed material loop rate performance of this command when used with DAQmx, before buy you. Does anyone have statistics of performance for this controller to the benchmarks of NOR (http://www.ni.com/white-paper/5423/en/)? Ideally, I'd be able to get execution rate of loop for T1 to T4 tests, for 1 and four lanes. I can't find this info online.

  I am currently borrow a PXI-8108 for my setup and I can reach nearly twice my goal of 2 kHz loop rates. I also know the performance of the 8108RT to the above reference, so if I had the same numbers for the 8106 I should be able to judge how the 8106 happen for my application.

  Thank you

  Jason

  Hello

  We do not have these data posted, but looking at the specifications for these two cards, I imagine that you would see no more than a 20% drop in performance between the two.  Probably less.

• blue screen on the PXI-8106 module: hardware malfunction

  Hi all

  I have a module, PXI-8106 (2 GB of RAM) - with a PXI-6254 and I was running trials with the attached screw (continuous acquisition of 16 I and 32 DI triggered by RTSI 4-5 kHz).

  When I started this morning, I got a blue screen of death saying this:

  Hardware malfunction

  Call your provider of support material

  NMI: Parity parity CheckMemory error

  The system stopped *.

  Now, I restarted the PXI revived the VI and it works again.

  Is there something I can do to ensure that this error will not be shown again?

  Thanks in advance for any help

  Meh... I know I'll be back on a fairly old post, but I found the solution.

  For some reason any installation Vision Acquisition software 8.5.1 created the problem by defining itself as the default driver for the network card. Then, go to 'manage' by right clicking on the 'Bureau', go to the hardware section, network card and select the intel driver solved the problem.

• Using PLX9054 PCI resource conflict

  We use a PLX9054 PCI chip in our designs PXI. We found that for some computers, only four modules can be used by PCI bus segment - the fifth module indicates a resource conflict. Looking at the use of detailed resources, it seems not be conflict in the address range or range of i/o addresses. On some computers, all five (or more) modules work fine.

  The problem may be in which addresses are assigned to modules - debugging indicates that module in conflict has been awarded addresses reserved for the ISA bus and are not transported on the PCI bridge we use to run unions PXI.

  Has anyone else seen elsewhere? Technical support PLX gave no indication.

  I agree that the problem is the BIOS, not the operating system.  The resources requested, however, I suspect that the problem is space e/s.  You can change resource requests to eliminate the need for I/O space?  It is a scarce resource which is likely to cause problems, and I recommend not to use it even if it isn't the cause of this particular problem.

  Minimum allocation of I/O bridge is 4 KB, and there are only 16 assignments available (64 KB).  While that sounds like a lot of what you do, it's complicated by folding mode ISA, which essentially limits you to 256 bytes of each 1024 bytes.  And the BIOS could not allocate space to IO well (I've seen before).

  For your requests for memory space, you might as well make them the two 4 KB.  The minimum increment for a bridge is 1 MB, so all the tips in your chassis can use up to 128 KB without using more system resources.

  Let me know if using space memory suits him.

  -Robert

• Satellite M30-106: System error at startup: resource conflict run the program installation or start-up?

  Hello, can someone help me please?
  When I start or restart my Toshiba Satellite SM30-106 laptop I get a system error RESOURCE CONFLICT Do You want to run the installation?

  I have 2 options [Run Setup] or [Boot]
  If I run [installation] I go to the blue Bios setup but can not see anything that can cause this error.
  If I select [boot boots} the system as usual.]
  How can I get my laptop start normally?
  I have no shared or added to any material. I ran the CD recovery Toshiba, no luck.
  concerning

  Richard, London SE6

  Y at - it an option to load the default settings of the BIOS on your laptop? If so, try it.

  Can't think right now that can generate this error unless you have recently
  had a new device that is STILL attached to a USB port (USB drive, printer, etc.)

  Concerning

  chain

  Update:
  I had a mistake of swearing to this post. I have found what Word does: "P E N" USB key so I replaced it with USB

• Satellite Pro M30 Bios error resource conflict - bios setting change or boot

  Hello.

  My beginning of portable satellite M30 with a bios error. The error that says "resource conflict, the bios setting change or start" If select 'start' the computer crashes before windows starts completely. I have remove the wi - fi and modem module and the same error message. I can't update the bios because the windows start. The bios version is 1.7. The laptop is the UK version. If select "Edit the bios", beginning of the bios but I can't find any resources management.

  Thank you

  (Sorry for my English, I'm from the Spain)

  Hello

  I think the bios error change setting means that you need to access the BIOS and should set the BIOS default settings.

  Please to do this, save the settings and try to start!

• Tecra A7 PTA71E: Bus of serial controller resource conflict PCI on motherboard

  Hello

  Sorry for my English.

  I have a problem with this laptop Tecra A7 PTA71E 00D00DSP. One of my clients transported this laptop with the next serial number.
  When you turn on the laptop, before windows login, seems that three consecutive messages:

  Conflict of resources - Bus serial PCI controller on the motherboard.
  BUS ERROR: 07 device: function, 06:01
  Resource conflict - PCI on the motherboard mass storage controller.
  BUS ERROR: 07 device: function: 06, 02
  Conflict of resources - Bus serial PCI controller on the motherboard.
  BUS ERROR: 07 device: function, 06:03

  I changed the RAM, hd, eating, with the same result.
  If you come in the bios and save the changes with the best configuration or default installation, the result is the same. I read in the forums that this error is tipycal in some toshiba models and the only solution is to change the motherboard. I hope it 'sn' t true and you, the experts of the toshiba, might help me find or tell an alternative, because I think my client won't like the motherboard, because it is usually too expensive.

  Who is King
  Mikel Pastor

  Hello

  > I read in the forums that this error is tipycal in some toshiba models and the only solution is to change the motherboard.
  I doubt s typical error for Toshiba laptop.
  According to this error message, there is something wrong with PCI devices on the motherboard, and this error may happen to any laptops from different manufacturers it typical error of s which is related to the question of the motherboard.

  According to me, there is no much to do you'll need a new motherboard.

• Gamepad - resource conflict do not accept the satellite A110

  Satellite A110 do not ACCEPT the JOY STICK. CONFLICT OF RESOURCE WITH THE MOTHER. BOARD OF DIRECTORS

  Hello

  I guess there is a resource conflict because the game port is not available on the device.
  So the joystick device tries to use the resources that are used or reserved for any other device.

  I wanted to use a joystick on my no Toshiba laptop, but it has not been possible.
  It was the same question as on your device. But I was able to use it on the desktop.
  I think that support doesn t use laptop a lot because of miniaturization and mobility Office PC port.

• Satellite P30 - PCI network controller resource conflict

  At the start, I have a message "resource conflict - PCI slot 03 Bus network controller: 02, device: 02, function: 00 press F1 to RESUME F2 to Setup.

  If I choose to resume, boot Windows XP starts but stucks in the process. I can boot Windows Mode safe mode without network only. I tried to reinstall the NIC drivers and restore the system, but it had no effect.

  How can I solve this problem?

  Hello

  The resource conflict appears generally if any 3rd device is already using the same resources of laptops.
  The installed Windows operating system must control everything and it is not necessary to assign resources manually. After installing the driver everything should run automatically

  I don't know why it happens, but in such case, the new OS installation m would be desirable.
  Try to back up all your important data and reinstall the OS with all the important drivers Toshiba.

  Don t forget to report your results

  Concerning

• PCI network on Equium A100-549 controller resource conflict

  I have an Equium A100-549 that stop to restart the computer with the error message:

  ERROR
  Resource conflict - PCI on motherboard network controller
  Bus: 02, device: 04, function: 00

  Press F1 to load the default values, F2 for Setup

  F1 just a loop to the same message, F2 brings up the configuration screens, but I see nothing here to fix this problem.

  There have not been any addition of material to the machine because it is out of the box from Toshiba.

  Any suggestions to get around this problem?

  I put t know what you did with your Equium and I advise you to install the OS by using recovery media delivered. After having this device will be updated again plant and equipment will be configured correctly.

  If the problem persists I would recommend you contact the after-sales Service of Toshiba partner and let check the device.

  By the way: close theme, you can see under http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=16271