debugger version 4 SmartData values were not

Similar Questions

• I have version 6 Creative Suite Design Standard disc. When I tried to install the software on my new laptop, several components have been installed, but Acrobat and Illustrator were not. The system returned the following message: "Adobe genuine software c

  I have version 6 Creative Suite Design Standard disc. When I tried to install the software on my new laptop, several components have been installed, but Acrobat and Illustrator were not. The system returned the following message: "Adobe genuine software check failed." The product you want to install is not genuine software remains, and seems to be counterfeit. Please report a piracy or contact customer support for assistance. This is the drive I bought from Adobe and running on my old laptop. I have the right product and serial numbers, which allowed me to install several other components of the software.

  Warning: "Adobe software real failure of Validation...". » | Windows

• security update were not installed security update for Windows XP (KB956572) (update 1 of 1)...

  security update were not installed security update for Windows XP (KB956572) (update 1 of 1)... The amendments failure disappeared many times
  kindly help to solve

  Hi DEVOO,.

  Follow the steps listed in the link below: how to troubleshoot Windows Update, Microsoft Update and Windows Server Update Services installation issues: http://support.microsoft.com/kb/906602/

  Then install the standalone update package. You can download the stand-alone version of the link below: http://www.microsoft.com/downloads/details.aspx?familyid=73d2324f-be59-4b0c-b1ac-9876a13c2c03&displaylang=en and check if the problem is resolved.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When installing CD collection national geographic Gets the error, "the version of this file is not compatible with the version of Windows that you are using".

  Original title: the version of this file is not compatible with the version of Windows you are using. Check your computer system information to see if you need a X 86 (32-bit) or X 64 (64-bit) version of the program, and then contact the software publisher.

  I have a large CD collection published by National Geographic. The difficulty lies in the installation of the program that displays the pages. Setup of the program ends. ins.  These Photo CD were produced by mindscape. When you try to contact them, they are based in France, and it is impossible to get support for this product. Is it possible to get the installer on the CD to do its job to provide a way to turn the 'pages '?

  Hello malaglinskom,

  In addition to what Azam offered, you may try the following:

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Hope this information helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Streets and trips 2011 give error, your registry settings for this application were not copied correctly.

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

  Installation of the new version of Microsoft Streets and Trips 2011 Win7 on my desktop HP says that it is installed.  However, when you try to open it, I get this response: "your registry settings for this application were not copied correctly.  To correct these settings, restart the installation of this application from the location that you originally installed it. "It won't let me open the program, even after I tried installing from the Microsoft Download Center and DVD disc several times.  He never asked me code product key during installation.  What can I do?

  Bill

  There is a forum dedicated Highway/Trips/Mappoint and streets that would be better to help with your problem.

  Click on the URL below a link to post your question.
  http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

  I hope this helps.

  Marilyn

• WinHlp32.exe KB917607 error: the following updates were not installed.

  Original title:

  WinHlp32.exe for Windows 7

  I have Windows 7, 64 Bit and downloaded the WinHlp32.exe - Windows6 version. 1-KB917607-x 64.msu. During the initialization of the installation, all right. When he moved, he said "the following updates were not installed. Update for Windows (KB917607). "All I can do at this point is to close the program, and my problem is not fixed.

  Run Microsoft Fixit leave of the following and then try to install the update:

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  http://Support2.Microsoft.com/mats/malware_prevention/

• "One or more lines on this delivery were not released pick."

  Hi experts,

  I created liberation pick and ship - confirm by using the wsh_deliveries_pub.delivery_action API.

  My problem is when I execute the two operations one after another because I get this error:

  "One or more lines on this delivery were not released pick."

  I checked that the flag wsh_delivery_details. released_status keep its value to 'R' until a few seconds where he turns to 'Y'

  I add this code to force a delay until this indicator is updated, but I guess that there is a more elegant solution for this.

  l_line_status := 'X';
  
  WHILE loop_count <= 15 AND l_line_status != 'Y' LOOP
    dbms_lock.sleep(5);
    
    loop_count := loop_count + 1;
    
    SELECT wdd.released_status
      INTO l_line_status
      FROM wsh_delivery_details wdd
     WHERE wdd.delivery_detail_id = p_delivery_details_tbl(1);
  
  
  END LOOP;
  

  Any clue?

  Kind regards

  Jose.

  Hi all

  I found the solution to my problem and I'm going to share with you all, because it is very easy!

  Instead of this algorithm:

  wsh_deliveries_pub.delivery_action(p_action_code='PICK-RELEASE')

  sleep (delay)

  wsh_deliveries_pub.delivery_action (p_action_code = 'CONFIRM')

  This makes the same and is standard and... faster:

  wsh_deliveries_pub.delivery_action(p_action_code='PICK-SHIP')

  It's a pity this forum has a low activity compared with the ADF it.

  Kind regards

  Jose.

• OBIEE error - Datetime-01-01 value does not match the specified format

  I get this error after the promotion of Production. It works perfectly well on the Test Server.

  I am using SQL server. After launching the date as a varchar, it works fine.

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 43119] Query Failed: [nQSError: 46046]-01-01 Datetime value does not match the specified format. (HY000)

  Gurus of OBIEE please help

  JD

  I found the solution as well.

  The Windows Server ODBC driver was old (Version 6). I have who has upgraded to SQL Server Native Client 11.0 and everything works fine.

• Can someone help me please? I bought Photoshop elements 13 and were not able to install it on my computer.  I made attempts at veveral to install it and I lose connection every time.  Since I was on a package of data plan with at & t, I buy e data

  Can someone help me please? I bought Photoshop elements 13 and were not able to install it on my computer.  I made attempts at veveral to install it and I lose connection every time.  Since I was on a package of data plan with at & t, I have buy the data each month.  I consume ALL my data.  To be a better way. Can someone help me please? I bought Photoshop elements 13 and were not able to install it on my computer.  I made attempts at veveral to install it and I lose connection every time.  Since I was on a package of data plan with at & t, I have buy the data each month.  I consume ALL my data.  To be a better way.

  I am well aware I could you bought the disc version. I bought the software Officemax in Vicksburg, MS I thought that the disc was included in the box.

• VMNet1 and VMNet8 were not created during installation

  Hello

  I installed VMWare Player 4.0.4 on a 64-bit Windows 7 host.

  I use XUbuntu 11.10 as the guest operating system, and in the settings of the virtual machine, the network is configured for NAT.

  I run a Web server on the guest in port 3020 operating system and I'm unable to connect from a browser, I opened in windows.

  In the browser, navigate to: http://192.168.132.128:3020 / where 192.168.132.128 is the ip address of comments as indicated by/sbin/ifconfig.

  I suspect that the problem is the fact that I don't have an adapter VMNet1 and VMNet8.

  In some ways, they were not created during the installation.

  How to re-install these adapters?

  Thanks in advance,

  Ido

  • At the changes I made (the address of ip subnet of 10.0.0.0 vmnet8 and vmnet8 IP gateway for 10.0.0.138 chaning) correct?

  If the physical LAN subnet use 10.0.0.0 then no VMnet8 change to this subnet is bad.  It is also wrong to affecting also the VMnet gateway IP address in the same IP as physical LAN Gateway IP address.  The local physical network and VMnet8 (NAT) are supposed to be completely distinct and different from the IP addresses, the subnet mask, gateway IP address, etc.   Use the restore default in the virtual network Editor to fix your incorrect configurations.

  • Should I just the adapter VMNet8 if I use NAT? (currently in the "Network Sharing Center" I have LAN and VMNet8)

  If you try to run a Web server in a Virtual Machine and you want to be able to access if the host beyond and you have a physical router that the host is connected to then assign just NIC of the virtual machine that is connected by a bridge and it will be a counterpart on the physical LAN.  Also in the virtual network editor change VMnet0 auto to a specific host NIC as the automatic bypass does not always work correctly.

  • Is there something I can do to solve the speed problems I experience in the guest operating system?

  I would like to start using the button restore default in the virtual network and then editor change change VMnet0 from auto to a specific host NIC and then the value of the Network Adapter to the Virtual Machine, connected by a bridge.   (Bridged using guess your able to do so)

  If you use NAT then do with it properly configured and that you use Port Forwarding as necessary in the virtual network for VMnet8 Editor.

  ==========

  As well as your using VMware Player, however, read Chapter 5, setting up the network connections, by Using VMware Workstation in order to have a better understanding of the Infrastructure virtual VMware.  (Note: not everything in Chapter 5 will apply to VMware Player.)

• 'Translators were not loaded' mistakes...

  Hello. I DW CS4 (Design premium group) on Mac OS 10 (10.5.8). When I open my program I get this message:

  "The following translators were not loaded due to errors:
  ASP.htm a configuration that is not valid.
  JSP.htm has configuration information that is invalid.
  SSI.htm model of server has configuration information that is invalid.
  XSLTransform.htm has configuration information that is invalid. »

  Reinstall the program help?

  I thank very you much for your time and your help.

  kimm91899494 wrote:

  I have a very similar problem.

  Whenever a file is opened in Dreamweaver CC 2014.1.1 6982 build on my iMac running Yosemite, I get this error:

  The following translators were not loaded due to errors: ASP.htm: has configuration information that is invalid.

  Rename the Configuration folder only prevented the application to load completely.

  Looks like you have renamed the incorrect configuration file.

  Dreamweaver has two and the one you want is hidden by your default operating system. Turn your hidden files: quickly show/hide hidden files on Mac OS X Mavericks & Yosemite - Ian Lunn - Front End Developer

  .. then go to Macintosh HD > username > library > Application Support > Adobe > Dreamweaver (version) > language > Configuration

• Select in 1 table only if a value does not exist

  Hi all
  I have problems, develop a single select statement to accomplish a single return value. I tried variations of DECODE and COALESCE, but it eludes me.
  
  I have two tables which are as follows:
  
  NAME
  ID FULLNAME
  1, senior officer
  Junior 2,
  3, Mister
  4, Senor
  5, Miss
  
  ABBREVIATION
  ID, ABBR.
  1, Sr
  2, jr
  3, M.
  5, ms
  
  What I want to do is choose from the table NAME only if that the value does not exist in the ABBREVIATION table.
  Ideally if I were to do something like:
  
  SELECT * FROM... WHERE (ID = 1 or ID = 2 or ID = 4)...
  
  I would get the following output:
  
  1, Sr
  2, jr
  4, Senor
  
  Thanks for reading!

  You want an outer join.

  SELECT decode(a.abbrev, NULL, n.fullname, a.abbrev)
  FROM name n,
  abbreviation a
  WHERE n.ID = a.ID(+)
    AND ....
  

  Something like that.

  Complete example:

  with n as (
  select 1 as ID, 'Senior' as FULLNAME from dual UNION ALL
  select 2 as ID, 'Junior' as FULLNAME from dual UNION ALL
  select 3 as ID, 'Mister' as FULLNAME from dual UNION ALL
  select 4 as ID, 'Senor' as FULLNAME from dual UNION ALL
  select 5 as ID, 'Miss' as FULLNAME from dual),
  a as (
  select 1 as ID, 'Sr' as ABBREV from dual UNION ALL
  select 2 as ID, 'Jr' as ABBREV from dual UNION ALL
  select 3 as ID, 'Mr' as ABBREV from dual UNION ALL
  select 5 as ID, 'Ms' as ABBREV from dual)
  select decode(a.abbrev, NULL, n.fullname, a.abbrev)
  from a, n
  where n.id = a.id(+)
  order by n.id;
  
  ID                     DECODE(A.ABBREV,NULL,N.FULLNAME,A.ABBREV)
  ---------------------- -----------------------------------------
  1                      Sr
  2                      Jr
  3                      Mr
  4                      Senor
  5                      Ms                                        
  
  5 rows selected
  

  Published by: tk-7381344, November 17, 2008 13:31

• iCloud backup after iOS 10 - some files were not available during the last backup

  HI - we are a company with about 350 users of iPhone and iPad.  I put this in the iCloud in the community section, but I've seen other users have the same problem in this section, so I thought I would add here.

  In order to stop users add their own e-mail accounts on the iPhone that lock us the device through restrictions - deactivation of the accounts section.  It stops and then access the iTunes settings.  In the test of iOS 10.0.1, we have one of the devices (a 16 GB 5 s, who had been a backup at 7:20 that morning), improved 9.3.2 that went well with no obvious problems, then, after a few days to leave the handset to the function, we have lifted the restriction and the backup on iCloud to find any backup not occurred since the upgrade and a message 'some files were not available during the last. backup"in its place.

  If all our staff upgrade their phones (we gave says not yet) then the backups look like they stop.  It is easy to fix, as a manual backup, will complete the process, but you have to remove the restriction to do this.

  We tested on iPhone 5, 5 s, air iPad iOS 8 to 9.3.5 and all have this problem.

  I have exactly the same problem, 16 GB iPhone 5s as well. I plan on raising at my Genius Bar appointment today.

• I tried to backup my iPhone several times. I get a message indicating that some files were not available at the time of the backup. How can I solve this problem?

  I attempt to backup my iPhone several times and it does not backup. I received a message stating "several files were not available at the time of the backup. How can I solve this problem?

  Hello Lope8725,

  Looks like you are trying to backup either iCloud or iTunes, but you have found an error on files being unavailable. Can reply you with the exact wording or a screenshot of the message you are getting?

  In the meantime, you can solve the problem with either of those two sections depending on whether or not it's iTunes or iCloud:

  If iCloud backup could not be completed or if you can not restore

  or

  If your iTunes backup could not be completed or you cannot restore from a backup

  See you soon!

• Version 38.0.1 does not see the passwords stored in previous versions

  Version 38.0.1 does not see the previously saved passwords, and urged it to re - enter and save the password. After revert you to the version saved 31.7.0 pass back too. We have more than hundreds of copies of the program and all cached passwords, users do not even know what their password. This failure is a serious problem.

  Problem solved. Probably the file has been corrupted signons3.txt. I deleted the file, and the new passwords are kept. After this version of the software update and new version I've seen passwords, create a logins.json file and now everything is fine. On all other computers in the company such a problem does not arise.