"One or more lines on this delivery were not released pick."

Hi experts,

I created liberation pick and ship - confirm by using the wsh_deliveries_pub.delivery_action API.

My problem is when I execute the two operations one after another because I get this error:

I checked that the flag wsh_delivery_details. released_status keep its value to 'R' until a few seconds where he turns to 'Y'

I add this code to force a delay until this indicator is updated, but I guess that there is a more elegant solution for this.

l_line_status := 'X';

WHILE loop_count <= 15 AND l_line_status != 'Y' LOOP
  dbms_lock.sleep(5);
  
  loop_count := loop_count + 1;
  
  SELECT wdd.released_status
    INTO l_line_status
    FROM wsh_delivery_details wdd
   WHERE wdd.delivery_detail_id = p_delivery_details_tbl(1);


END LOOP;

Any clue?

Kind regards

Jose.

Hi all

I found the solution to my problem and I'm going to share with you all, because it is very easy!

Instead of this algorithm:

wsh_deliveries_pub.delivery_action(p_action_code='PICK-RELEASE')

sleep (delay)

wsh_deliveries_pub.delivery_action (p_action_code = 'CONFIRM')

This makes the same and is standard and... faster:

wsh_deliveries_pub.delivery_action(p_action_code='PICK-SHIP')

It's a pity this forum has a low activity compared with the ADF it.

Kind regards

Jose.

Tags: Oracle Applications

Similar Questions

Error message: the preset used by one or more sequences in this project requires third-party components that could not find. These sequences will be changed to use a custom sequence implementation. To continue editing using the original preset, as

Hi all
I can't open a project PP without this error message that appears:
"The preset used by one or more sequences in this project requires third-party components that could not find. These sequences will be changed to use a custom sequence implementation. To continue editing using the preset original, exit the application without saving the project, reinstall all third-party components that are needed, and reopen the project'.»
What I had been doing before that to happen was a PP project using sequences ProRes for editing and editing multicamera. Several cameras didn't work very well and after a few attempts of difficulty that I gave up and finished the work of cutting 3 layers of video instead. SOUL refused to make the finished three lasting more than 1 hr sequences so rendered video sequences PP. finals
I tried to remove the plists for SOUL, PP and QT repair disk permissions and restarted, but there was no improvement.
Customer is satisfied for now, but will want to return on this work to a later date so decided to uninstall and reinstall SOUL and PP in the hope that the two would be willing to work properly when needed again. SOUL works very well in conjunction with another PP project, but now I can't open the PP project in question without the above error message appears.
After searching on the net, it seems that the problem may be caused by ProRes but I could not find a definitive solution to the problem. Does anyone know either:
1. How do I solve this problem?
2. If I chose the "modified by using a custom sequence parameter", can I be sure that my footage will look the same, even if they do not use ProRes? The final format of the deliverable will be mp4 so as long as the overall appearance does not change so I can afford a change in the edit codec. It's just that with three sequences of more than an hour long, I don't want working days to be ruined.
Other older PP projects of mine open and work properly.
First CC 8.2.0 Pro
Media encode CC 8.2.0.54
10.10.2 OSX
Any help would be greatly appreciated.
Duncan.

Web chat Adobe find a solution.

Open the PP. project

Export your project or the sequence in Final Cut Pro XML form.

Set up a new project PP.

Import Final Cut Pro XML file.

This will take you to the top race.

Since getting back to this publishing project, I found that some things will be lost or change using XML:

You will lose the position key framing, black video clips, dissolve fx, audio levels, dynamic audio fx, the possibility to open a multi camera clip and change the display of the camera.

You keep the cut points, crop fx.

Not perfect but only took a few hours to save 3 working days.

ORA-20001: APP-FND-02604: one or more of the following data are not valid
Hello

I use the fnd_user_pkg.addResp procedure to add the responsibility of self-service to a group of users with the script below:

Start
for e in loop (SELECT a domain NAME)
-dbms_output.put_line (e.name); just to confirm the names are there
fnd_user_pkg.addResp (e.name, 'BY', 'CBK_EMPLOYEE_DIRECT_ACCESS', 'STANDARD', 'CBK Employee Self Service', sysdate, null);
end loop;
end;
*/*

eld table contains the names of users to add, in capital letters. When I try to run the script, it fails with the error:

ERROR on line 1:
ORA-20001: APP-FND-02604: one or more of the following data are not valid:
APPLICATION_SHORT_NAME =, RESPONSIBILITY_KEY = CBK_EMPLOYEE_DIRECT_ACCESS,
SECURITY_GROUP = STANDARD.
ORA-06512: at the 'APPS '. APP_EXCEPTION", line 72
ORA-06512: at the 'APPS '. FND_USER_PKG', line 2713
ORA-06512: at line 4 level

However when I run the procedure of inserting a single user at a time, it ends without error. A popular thought.

Dula
Hello

User_id = this will come from the fnd_user table?

Fix.

responsibility_application_id and responsibility_id = this will be retrieved through a query joining the tables?

You can find it in the FND_RESPONSIBILITY, FND_RESPONSIBILITY_TL tables... See the site for more details--> http://etrm.oracle.com eTRM

Thank you
Hussein

Problems with error Windows Audio and Control Panel "one or more of the audio service is not running.

I'm a bit of a technophobe, but I'll try to explain my problem, I got better. I recently had a problem with Windows 8 and refreshed my system. After refreshing, I installed AVG Anti-virus and that's where my problems really started. After installing AVG I have no sound and my control panel usually pop up. The box is displayed but there is nothing in it and it sorts just of sticks, frozen. I tried the fixes recommended to fix my sound. The speaker in my taskbar icon has a red x on it and when I try to open it it goes right to the problem-solving mode, then comes up with "one or more of the audio service is not running. When I try "run services.msc' and try to start Windows Audio through Services I get error 0x800706cc. I tried to uninstall AVG and reboot, but it did make a difference. Please help, this leads me to the madness now. Nothing I try seems to work!

Installation of AVG is when the problems started, I would start by undoing that. Since the normal uninstall did not help, use system restore to return to a work situation. Check here and use the #1 option.

Cannot install Microsoft Streets & Trips with GPS 2011 error: your registry settings for this application were not copied correctly.

Original title: Registry loading problem streets & trips

I bought the MicroSoft Streets & Trips with GPS 2011 disc. After the loading and activation, I get the message "your registry settings for this application were not correctly copied. I uninstalled and reinstalled 3 times. I even thought that it might be a computer problem, so I bought a new computer, but same result. Should I simply a damaged drive? What is my solution? Russ B, Mt Laurel NJ.

Hello

1. where did you buy the disc?

I suggest you to send your request in the below link.

Support for Microsoft Streets & Trips: http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

Reference: http://www.Microsoft.com/streets/en-us/community-and-news.aspx

Hope this information is useful.

rigistery settings for this app were not copied correctly microsoft Highway and travel

At the opening of streets MS & travel 2011 I get this error "your registry settings for this application were not copied correctly. Run put in place againfor this application from the location where you installed worginally. "I did that 3 timees I deleted the program and reinstalled in 2 and still Lems the same error when I try to open the program.

... Your registry settings for this application were not copied correctly. Race againfor implemented this application from the location where you installed worginally...

You probably need to run the installer as administrator with elevated permissions to correctly make the necessary registry changes.

Uninstall the program via the applet of Add / Remove Programs of the Control Panel then locate the installer from the disc or download and right click and select run as administrator. Acknowledge the UAC confirmation and provide credentials if required, proceed through the installation normally.

Microsoft Streets & Trips should operate normally after completing the installation.

Streets and trips 2011 give error, your registry settings for this application were not copied correctly.

Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

Installation of the new version of Microsoft Streets and Trips 2011 Win7 on my desktop HP says that it is installed. However, when you try to open it, I get this response: "your registry settings for this application were not copied correctly. To correct these settings, restart the installation of this application from the location that you originally installed it. "It won't let me open the program, even after I tried installing from the Microsoft Download Center and DVD disc several times. He never asked me code product key during installation. What can I do?

Bill

There is a forum dedicated Highway/Trips/Mappoint and streets that would be better to help with your problem.

Click on the URL below a link to post your question.
http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

I hope this helps.

Marilyn

After extraction of CD 12, you will now receive an error saying: "Windows Media cannot extract one or more tracks on this CD.

I pulled about 12 CD, and now everything suddenly, I get a pop up that reads "WINDOWS MEDIACANNOT ONE or MORE RACKSFROM CE CD RIP ' does that mean?

I had the same and it drove me nuts for days!

I found this solution and it worked and everything is back to normal now :)

Go to Tools - Options - Rip music and see if you have a location, that music is being ripped off. I did not when I looked, it was empty.

Then go to organize - manage libraries - music, it should be a location of folder of music here, otherwise click on "add" button and add the music folder.

Now do the same for the other 3 libraries, videos, pictures and recorded tv, all should have places, remove those without a location.

try to check out again.

I hope like me you will be out of service again.

Thanks Andy!

After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After having read a few tutorials, I suspect this deactivation were not made before

After the hard drive failed, I changed my computer and reinstalled LR5. I've updated LR5 a few weeks before my computer crashed, so for you my serial number is up-to-date. After reading some tutorials, I'm suspecting this disabling was not made before reinstalling... Recommendations on resettlement in this case?

You actually have a renewal LR5 problem or ask yourself what you need to do?

Download and install the update LR 5.6 from here: http://www.adobe.com/downloads/updates

Enter your LR 5 serial number and you should be ready. If something doesn't work, then, please describe the problem in detail.

This code were not run if an error occurs?

I created a script to remove tables as below.

 DECLARE
    v_sql VARCHAR2(4000);
 BEGIN
     FOR obj IN (select table_name from user_tables) 
  LOOP
      v_sql := 'drop table  ' || obj.tablename';
      dbms_output.put_line(v_sql);
   EXECUTE IMMEDIATE v_sql;
    END LOOP;
  END;

But, if oracle encounters an error, say an error like

ORA-02449: unique/primary keys in table referenced by foreign keys

This code will break out of the loop and stop the execution. Right?

After getting the typo is included in your example:

-ORA-01756: city not properly finished chain
-component 'TABLENAME' must be declared

The answer to your question is: right, but you could have tested this easily yourself of course.

SQL> select constraint_name, constraint_type, table_name from all_constraints where table_name in ('TABLE1', 'TABLE2');

CONSTRAINT_NAME                C TABLE_NAME
------------------------------ - ------------------------------
SYS_C0020788                   P TABLE1
C1                             R TABLE1
SYS_C0020789                   P TABLE2
C2                             R TABLE2

4 rows selected.

Elapsed: 00:00:00.21
SQL> DECLARE
  2      v_sql VARCHAR2(4000);
  3   BEGIN
  4       FOR obj IN (select table_name from user_tables)
  5  .
SQL> DECLARE
  2      v_sql VARCHAR2(4000);
  3   BEGIN
  4       FOR obj IN (select table_name from user_tables where table_name in  ('TABLE1', 'TABLE2'))
  5  LOOP
  6        v_sql := 'drop table  ' || obj.tablename';
  7        dbms_output.put_line(v_sql);
  8     EXECUTE IMMEDIATE v_sql;
  9      END LOOP;
 10    END;
 11  /
ERROR:
ORA-01756: quoted string not properly terminated

Elapsed: 00:00:00.11
SQL> DECLARE
  2      v_sql VARCHAR2(4000);
  3   BEGIN
  4       FOR obj IN (select table_name from user_tables where table_name in  ('TABLE1', 'TABLE2'))
  5  LOOP
  6     v_sql := 'drop table  ' || obj.tablename;
  7        dbms_output.put_line(v_sql);
  8     EXECUTE IMMEDIATE v_sql;
  9      END LOOP;
 10    END;
 11  /
   v_sql := 'drop table  ' || obj.tablename;
                                  *
ERROR at line 6:
ORA-06550: line 6, column 35:
PLS-00302: component 'TABLENAME' must be declared
ORA-06550: line 6, column 4:
PL/SQL: Statement ignored

Elapsed: 00:00:00.07
SQL>  DECLARE
  2        v_sql VARCHAR2(4000);
  3     BEGIN
  4         FOR obj IN (select table_name from user_tables where table_name in  ('TABLE1', 'TABLE2'))
  5    LOOP
  6          v_sql := 'drop table  ' || obj.table_name;
  7         dbms_output.put_line(v_sql);
  8      EXECUTE IMMEDIATE v_sql;
  9       END LOOP;
 10     END;
 11  /
drop table  TABLE2
 DECLARE
*
ERROR at line 1:
ORA-02449: unique/primary keys in table referenced by foreign keys
ORA-06512: at line 8

Elapsed: 00:00:00.23
SQL> desc table1
 Name
 ----------------------------------------------------------------------
 COL1
 COL2                                                                   

SQL> desc table2
 Name
 ----------------------------------------------------------------------
 COL1
 COL2

[Error number: 0x8DDD0018] _ the site cannot continue because one or more of these Windows services does not work:...

I tried to fix the automatic updates via the following Web sites to ensure that the BITS and the automatic updates function.

http://support.Microsoft.com/kb/910337

http://support.Microsoft.com/kb/883614

The only problem is the history of the update, hidden restore updates, and change the settings appear dimmed. Please don't tell me not to:
To ensure that these services are running:
1. click on start and then click Run.
2. type services.msc, then click OK.
3. in the list of services, double-click on automatic updates, and then click Properties.
4. in the startup type list, select automatic and click on apply.
5. Verify that the service status is started, if the service status is stopped, click the Start button.
6. in the list of services, double-click on Background Intelligent Transfer Service (BITS), and then click Properties.
7. in the startup type list, select manual and click on apply.
8. check that the service status is started, if the service status is stopped, click the Start button.
9. in the list of services, double-click the event log and then click Properties.
10. in the startup type list, select automatic and click on apply.
11. check that the service status is started, if the service status is stopped, click the Start button.

I did it!

Thank you
gdv925

Norton Utilities has a section "Manage your Services" where I chose a minimum on commissioning. I 'restored' Services '' recommended '' and all is good.

Upgrade to Windows 7 Ultimate and highway 2010 receives the error: "your registry settings for this application no were not copied correctly."

I updated from XP Pro to Win7 Ultimate.

When I try to install Highway 2010 (that I had before) I get the following message

"Your registry settings for this application were not copied correctly. To correct these settings, run the installation of this application from the location where you originally installed it. »

I tried the suggestions without success. So what do I do to fix this?

I have found since that when I uninstall several files are missing, 41ce1.rbf & 41d81.rbf are later. It seems that highway will not properly work without their files (I guess here).

So where they are or how can I get the.

I get the same problems when I try to install Highway 2011 test, I don't buy the full program so the custom of trial run.

Chris Townsend

Now, I know the .rbf files are files of Roll-back.

Hello Lrchr,

Your question would be better addressed in the highway, streets and trips and MapPoint.
Click here for a link to repost in the forum of the highway. They will be better able to solve your problem here.

I hope this helps.

Marilyn

When I try to open the 2010 Highway, I get this error: "your registry settings for this application no were not copied correctly."

I am running Windows 7 Home Premium and use Microsoft Autoroute 2010. This used to open and run without any problem but now I get the message "your registry settings for this application were not copied correctly. To correct these settings, restart the installation of this application where you originally installed it. I did several times since the original disc without success. I also did my best to remove all files of previous Highway before recharging. Any help or suggestions please?

original title: Highway 2010

"Do right click used to contain run them as administrator but does not give the option now."

The above is a bit worrying, does that apply to just highway or all the .exe?

If you press the SHIFT key while you right click, if you see?

Anyway have you tried to test with another Windows user to see if your profile is corrupt?

Unable to load microsoft highway with windows vista premium - sound happens with your registry settings were not copied correctly

I recently bought Microsoft Highway to put on a laptop that operartes Windows Vista premium. After loading when you try to use the software, it comes up with "your registry settings for this application were not copied correctly-..." Please reinstall

Any guidance would be appreciated

Thank you

You are welcome.

A word of warning:
I guess you knoe the potential dangers of do NOT turn UAC.
Suggest you turn back on UAC when you do not run the highway.
There is an opposite camp insisting UAC is 'nuisance, at best', but it's something else, unrelated to your problem.

Error message that your registry seetings were not copied correctly

I have been using Highway 2007 since 2007 with no problems until yesterday, September 23, 2013 when I tried to use it I got the error message that your registry settings for this application were not copied correctly. Rerun the installation program

I tried several times to put term up all without success.

Finally, I uninstalled the program and reinstalled from the original disk but still have the same error message.

Can someone please

Hi Ron,

Check out the following link. This could help you.

Error message when you try to use the streets & trips: "your registry settings for this application were not correctly copied.

http://support.Microsoft.com/kb/314590/en-us

You can uninstall a program from the control panel:

(a) press the Windows and X key to open a list of tasks from the lower left corner of the screen.

(b) select Control Panel.

(c) select programs and features.

(d) double-click the program you want to uninstall, and then follow the instructions on the screen.

If the problem persists. You can ask your question on the forum dedicated for Streets & trips for assistance on this issue.

http://social.Microsoft.com/forums/en-us/home?Forum=streetsandtrips

I hope this helps.

"One or more lines on this delivery were not released pick."

Similar Questions

Maybe you are looking for