Declares the State not shown (CS4/Win)

Similar Questions

• HP ENVY M6 1254eo help me to find the correct drivers (lowered the victory note 8 for win 7)

  I bougth an HP ENVY M6 mobile 1254eo today, but I strongly dislike win 8 so I immediately spent to win 7.

  The problem is that I find that no driver for win 7 is associated with this model, at least not on any other technical support site of HP that I searched.

  Are there drivers available at all, and if so could someone direct me to them?

  Hello:

  Use these drivers for the Ethernet controller.  3rd file down on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 13 & PFid = 5 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  Network controller:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5379211 & prodNameId = 5379212 & swEnvOID = 4058 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-122653-1

  Bluetooth:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5379211 & prodNameId = 5379212 & swEnvOID = 4058 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-119299-1

• Then if the statement not be case-sensitive?

  Hey guys.  The two pages I have to fill in for work contain the same data, but their issue numbers are different and I have to convert the question numbers. I have two textfields: HQ_1 # and HQ_1 #DI and I wrote a giant if then statement to act like the converter in question to change the letter of the entrances to what is appropriate to this other page (worth 20 points of entry)... It looks like this

  "Sloppy code.

  li1 var = this.getField("HQ_1#");

  di1 var = this.getField ("HQ_1 #DI");

  If (li1.value == "1 c" | li1.value == "1 c")

  {

  DI1. Value = '1');

  }

  Else if (li1.value == "1 d" | li1.value == "1 d")

  {

  DI1. Value = "1 b);

  }

  on the other

  {

  DI1. Value = "";

  }

  While I put 1 c or 1 c the form above, it resumes at A below... GREAT! But this isn't an optimal coding... I would like to learn to code efficiently, so basically I would like to settle there where she is something like If (li1.value == "1 c" | li1.value == "1 c') and to work independently of 1 c or 1 entered c... I know that there is a way to get the if then to not be case-sensitive, but I can't understand it... I added this code in the box of calculation in HQ_1 # to see if it would work, but it's not:

  If (event.value! = null) event.value = event.value.toUpperCase ();

  After adding this code, HQ_1 # visually show as caps 1 c If 1 it went, but I guess that it still stores like 1 it... That my problem...  The code "cut off" from If (li1.value is "1 c") does not appear 1 to because I typed in 1 it... Although "1 c" appears.  So basically I took this at the moment and I went with my Sloppy Code.

  
  PS This is the first thing I did for myself, so I'm glad my work so far.

  You can decide what you want to continue working with upper or lower case. Then you can simplify all by applying toUpperCase() or toLowerCase() to the value in the fi section. It will look like this (assuming that you are working with the lowercase):

  If (event.value.toString () .toLowerCase () is "1 c")

  Note that we ensure that event.value will be processed as a string by converting it to a string with the toString() method. Maybe that's not necessary if you can ensure that event.value will always be of the string type.

  I hope this can help.

  Max Wyss.

• See the recyclebin not shown anything once drop table

  currently test flashback table, but I wonder why recycle bin does not show anything after release? I check the parameter and the value is enabled. now it has me thinking there at - it a link between re-use locker, retention of undo and undo SCT size?
  
  If so why it does not work on a undo_retention = 900, cancellation of TBS size = 100MB and the table that I dropped consisting of 1 single column and type of 3 lines data number, which is particularly small. is there something that I need to put more?
  
  DB version is 10.2.0.1.0
  
  Thank you!

  mitchykoi wrote:
  It is also possible that all SYS objects can be stored or seen in a recyclebin?

  Only if the user Sys is store in a tablespace nonsystem as below,

  SQL> conn / as sysdba
  Connected.
  SQL> create table test_rbin2(a char) tablespace users;
  
  Table created.
  
  SQL> select table_name, tablespace_name
    2  from user_tables where table_name='TEST_RBIN2';
  
  TABLE_NAME                     TABLESPACE_NAME
  ------------------------------ ------------------------------
  TEST_RBIN2                     USERS
  
  SQL> show recyclebin
  SQL> drop table test_rbin2
    2  ;
  
  Table dropped.
  
  SQL> show recyclebin
  ORIGINAL NAME    RECYCLEBIN NAME                OBJECT TYPE  DROP TIME
  ---------------- ------------------------------ ------------ -------------------TEST_RBIN2       BIN$l/0nppCwhObgQL4KFEMjfA==$0 TABLE        2010-12-22:09:12:39SQL>
  

  You can see that the table is now in the recyclbin. Its actually the tablespace that would govern this thing. System tablespace is special and its objects are special treaties as well. The Sys user is supposed to be the owner of the system default tablespace (it's too) so by default, any drop table made here would not go to recyclebin.

  as a recyclebin for system objects only?

  No, there is no such thing.

  Also, what are the importance of the following: buffer_pool_recycle, db_recycle_cache_size for the garbage?

  Db_recycle_cache_size actually has Nothing to do with the Recyclebin except that it shares a common word with the latest. Buffer_pool_recycle also has nothing to do with the Recyclebin and actually, it has nothing to do at all of 10.1, because it is an obsolete parameter and is replaced by, guess what, db_recycle_cache_size .

  HTH
  Aman...

• MultiDPIBitmapSource with the States

  Hi all

  What is the right way to use the MultiDPIBitmapSource class with state changes:

  I do a skin for simple button that uses an image and replace the image source according to the State. The following code captures the State. The image will remain in the normal position and never capture more or down events and swap for the appropriate source. This seems possible, or is seized semiautomatic in Flash Builder. What I'm doing wrong here?

  Example:

  {code}

  <? XML version = "1.0" encoding = "utf-8"? >

  < name s:SparkSkin = "myButtonSkin.

  ' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "

  xmlns:s = "library://ns.adobe.com/flex/spark".

  ' xmlns:fb = ' http://ns.Adobe.com/FlashBuilder/2009 ">

  < s: states >

  < name s: State = "mounted" / >

  < name s: State = "over" / >

  < name s: State = "low" / >

  < name s: State = "disabled" / >

  < / s: states >

  < fx:Metadata >

  <! [CDATA]

  [HostComponent ("spark.components.Button")]

  []] >

  < / fx:Metadata >

  < s:BitmapImage >

  < s:source >

  < s:MultiDPIBitmapSource

  source160dpi="/assets/images/icon160.png".

  source240dpi="/assets/images/icon240.png".

  source320dpi="/assets/images/icon320.png".

  source160dpi.over="/assets/images/icon160over.png".

  source240dpi.over="/assets/images/icon240over.png".

  source320dpi.over="/assets/images/icon320over.png".

  source160dpi. Down="/assets/images/icon160down.png".

  source240dpi. Down="/assets/images/icon240down.png".

  source320dpi. Down="/assets/images/icon320down.png"/ >

  < / s:source >

  < / s:BitmapImage >

  < / s:SparkSkin >

  {code}

  I found what I was doing wrong. Here is the solution:

  <>

  source160dpi="/assets/images/icon160.png".

  source240dpi="/assets/images/icon240.png".

  source320dpi="/assets/images/icon320.png"/ >

  <>

  source160dpi="/assets/images/icon160over.png".

  source240dpi="/assets/images/icon240over.png".

  source320dpi="/assets/images/icon320over.png"/ >

  etc... If the source tag actually takes the State, not the MultiDPIBitmapSource.

• Windows 8 apps is not up-to-day, continue to show "Pending" when I look at the State of windows applications update 8

  Dear team,

  I use the laptop dell inspiron with windows operating system 8. Apps Windows 8 does not get updates, continue to show "Pending" when I look at the State of windows applications update 8, I haven't downloaded or installed all the other apps, but I'm trying to update the applications integrated Windows 8 came with the computer dell laptop. I have high speed internet. I installed McAfee total protection subscribed when the purchase of the laptop.
  Please help free for applications update of Windows 8.

  Finally, I found a solution. Go to troubleshooting (press win + w > then type troubleshooting). a window now opens in the office. Click on "solve problems with windows updates. Now click Next. Windows will search for solutions, but he can't find anything. Then, windows will ask if you want to try in administrator mode. Click Yes. Windows will find and fix the problem. That's all.

• Is not "ELSE" ISN'T THE LAST CLAUSE IN the STATEMENT "IF"?

  Hello

  "ELSE" IS THE LAST CLAUSE IN THE STATEMENT "IF"?

  I saw this procedure

  IF t_type < 3
     THEN
        SELECT MAX (c_p)
          INTO n
          FROM (SELECT COUNT (*) c_p
                  FROM print_pdf p
                 WHERE p.reg_key = r_key
                   AND p.group_code = g_code
                   AND p.test_code = 0
                   AND p.test_type = 0);
  
        IF n = 0
        THEN
           INSERT INTO print_pdf
                       (reg_key, group_code, test_code, test_type
                       )
                VALUES (r_key, g_code, 0, 0
                       );
        END IF;
     ELSE
        SELECT MAX (c_p)
          INTO n
          FROM (SELECT COUNT (*) c_p
                  FROM print_pdf p
                 WHERE p.reg_key = r_key
                   AND p.group_code = g_code
                   AND p.test_code = t_code
                   AND p.test_type = t_type);
  
        IF n = 0
        THEN
           INSERT INTO print_pdf
                       (reg_key, group_code, test_code, test_type
                       )
                VALUES (r_key, g_code, t_code, t_type
                       );
        END IF;
     END IF;
  

  the "else" clause is in regards to the first "IF" statement, then there is 'IF' inside?

  How could it be if 'Other' is the last sentence in an IF STATEMENT?

  "ELSE" IS THE LAST CLAUSE IN "IF STATEMENT"?

  This means that in the estate

  IF

  ELSIF

  ELSIF

  ON THE OTHER

  END IF

  It is not allowed to write an another ELSE ELSIF.

  This does not mean that you cannot nest IF statements.

  IF

  ELSIF

  ELSIF

  ON THE OTHER

  IF

  ELSIF

  END IF

  END IF

  In this cases the nested IF statement is not part of the external FI. And it is perfectly valid syntax as shown in http://docs.oracle.com/cd/E11882_01/appdev.112/e25519/controlstatements.htm#BABHIAAC

• Assign dynamic statement declaring the block or block start

  Hi all
  
  For code below, if I attribute the select statement in the section declare for the corresponding variable, it will improve performance.
  
  For cust_veh_id we have another block cursor to declare, only partial code is provided.
  
  
  What I wanted to.
  

  declare
  v_addr_chg_stmt                 varchar2(2000) := 'select ''Y''
  FROM cust_addrs addrs
  WHERE customer_id = :v_customer_id
  AND updated_date >:p_end_date
  and rownum = 1';

  Actaul
  ---------
  

  declare
  p_end_date                      date;
  v_addr_chg_stmt                 varchar2(2000);
  v_mileage_stmt                 varchar2(2000);
  begin
  
  select updated_date into p_end_date
  from process_log_rfsh
  where tran_code ='CAP';
  
  v_addr_chg_stmt :=
  'select ''Y''
  FROM cust_addrs addrs
  WHERE customer_id = :v_customer_id
  AND updated_date >:p_end_date
  and rownum = 1'
  ;
  
  v_mileage_stmt :=
  'SELECT ''Y'' FROM cust_vehicles_audit
  WHERE cust_veh_id=:v_cust_veh_id
  AND field_name =''LAST_MILEAGE''
  AND added_date > :p_end_date
  and audit_date >= trunc(:p_end_date)
  and rownum=1'
  ;
         begin
                   execute immediate v_addr_chg_stmt
                      into v_addr_change_flag
                      using v_customer_id,  p_end_date;
               exception
            when no_data_found then
                   v_addr_change_flag:='N';
               end;
          begin
                 execute immediate v_mileage_stmt
                   into v_mileage_change_flag
                  using v_cust_veh_id,  p_end_date, p_end_date;
             exception
           when no_data_found then
                 v_mileage_change_flag:='N';
             end;
  end;

  Thank you
  Rambeau
  
  Published by: Raghu on January 18, 2013 13:13

  Rambeau wrote:
  This code is already running in production for a few years.

  Not a reason to justify using dynamic SQL.

  YOU NEED a JUSTIFICATION FOR the USE of DYNAMIC CODE. In any language.

  Once again: WHAT is your justification? If you can't provide that, so why you use code Dynamics?

  If you must use dynamic sql statements, performance definition wise to declare the block or start will be better.

  No difference - as no method doesn't change the actual SQL cursor run. Nor did the resulting cursor read faster data blocks.

  PL/SQL also does not care where the variable assignment happens. The difference is so small and so small, it is not relevant to the performance:

  SQL> declare
    2          t1      timestamp;
    3  begin
    4          --// test 1
    5          t1 := systimestamp;
    6          for i in 1..10000 loop
    7                  declare
    8                          num     number;
    9                  begin
   10                          num := 1;
   11                  end;
   12          end loop;
   13          dbms_output.put_line( 'Test 1. '||to_char(systimestamp-t1) );
   14
   15          --// test 2
   16          t1 := systimestamp;
   17          for i in 1..10000 loop
   18                  declare
   19                          num     number := 1;
   20                  begin
   21                          null;
   22                  end;
   23          end loop;
   24          dbms_output.put_line( 'Test 2. '||to_char(systimestamp-t1) );
   25
   26  end;
   27  /
  Test 1. +000000000 00:00:00.000040000
  Test 2. +000000000 00:00:00.000024000
  
  PL/SQL procedure successfully completed.
  
  SQL>
  

• When you use fireftp I use the FTP user name and password to connect, but then when I try to connect I get "password not shown" in the lower left corner. Why?

  That's what shows the box below:

  331 user [email protected] OK. Password required

        PASS (password not shown)
  

  Many terminal-style applications remove the password from appearing in the journal of communication, to protect any person who could later read the newspaper. I think that FireFTP that emule. It is important to be able to view the password?

• Can not do a screen shot using the command shift 4. Unable to capture the States. I restart the Mac.

  Can not do a screen shot using the command shift 4. Unable to capture the States. I restart the Mac.

  It is to capture a piece of the element you want to screenshot, make a fire using full-screen control + 3

• Satellite M70 - not all the FN keys available in Win Xp

  Satellite M70

  750, 1 G DDr2, ATi x 700 PM

  I use XP + Vista, firstly I updated my BIOS to 5.10 under VISTA

  FN works great under vista. However, in XP only ESC + F1, F2, F3, F4, F10, F11, F12 work

  Only the F1 has an icon when I press LCD brightness, wifi, tounchpad power and Fn + space not working do not.
  No change, no show the icon?

  Anyone had this problem before?

  Hello

  The FN keys don't work on your laptop running Win XP because of the BIOS.
  You have updated the BIOS that is specially designed for the Vista operating system.

  So you will be able to use the FN key in Vista, but some simple buttons will not work with Win XP

  There are also other BIOS (at that time 1.50) that has been specially designed for Win XP.

  So, if you use two BONES; XP and Vista, then you must decide what OS must support the FN keys.

  Concerning

• VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not supported as defined by the resource.

  I try to open a com port Seraglio in LabVIEW get this error:

  VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not supported as defined by the resource.

  It occurs in ISA set up a Serial Port (Instr) .vi and seems to be related to the speed of transmission. If I use anything else than 9600, I get this warning. I need to use 115200. I can open successfully to other com ports at 115200.

  I am able to talk to this device using other Terminal programs to 115200 without problem. It is only through LabVIEW and NI MAX.

  The Unit presents itself as "Stellaris Virtual Serial Port (COM12)" in deveice Manager.

  Is there a way to get around this?

  Thanks in advance!

  
  

• What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

  What is happening with the DNS requests that cannot not find a matched host (A) RR in the zone are sent to WINS servers, but there is no WINS server installation?

  Hello

  Please repost these questions in the Technet Forums

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  See you soon.

• Cannot install Atlantic Quest - Atlantic Quest. The ink is not that a Win 32 application___ valid %1 is not a valid Win 32 application

  Original title: I bought Atlantic Wild Tangent __I Quest get the next Quest message___C:\ProgramData\Microsoft\Windows\GameExplorer\668DAD4E-7352-4D98-B28E-4...\Atlantic. The ink is not that a Win 32 application___ valid %1 is not a valid Win 32 _ application

  I have a Dell Inspiron 580 i3 6 GB ram 1 TB disk 64 bit (only a month)

  I got an exe file. record and I think it's the file that was the problem. In the folder of the file (that I have redownloaded 6 times), I noticed that he was not an exe WT. like my other games have.  In any case, I asked for a refund and downloaded the game even MSN. Everything works now. Thanks for your response!

  Slyrex

• Buttons does not return to the early state in the state machine.

  Hello

  I downloaded a program that is used to back up data. I used a machine to States with different States. State 1 is initialization, where it moves automatically select the State, which allows to select one of the remaining States to copy the data. The selection is made by command buttons. Once u pressed a button, it goes to that respective State and in this state when you press the backup, the backup of data occurs. Once the backup is located the program goes back to the selection state. So far, it works fine. The problem then. Once he returned to the selection state after that copy was made, then none of the buttons are working properly. Then when it goes back to select State and I tried to select a State, nothing happens, not even the stop button works. I don't know why this is happen. Please help me solve this problem. Thanking you in advance.

  You have many States where you have the event structures ("All data" "given more older that '" young data that ' 'Defined Data') (worse there are two of them in "Data set")

  Each of these event structures are for a "Backup" mouse event down.  A singularity is now why you use a mouse event down on a button.  This really should be a value change event.  But this is not the big problem.

  The big problem is that all of these structures events are set to lock the front until the end of the case of the event.  Well, when you click the mouse down on this button, all 4 of these structures tail event this event.  If you are luckly, one of the event will execute and process the event.  Others, that you will never run because the state machine will not get through these cases.)

  You have multiple structures of event you VI and certainly not buried in the event.

  Reading guard and recommendations when using events in LabVIEW

  Then fix your VI architecture.  You must limit the structures of the event or a separate parallel loop, or to a single case of your state machine that your code will frequently return to, without any other user interaction, in order to service the structure of the event.