Decommissioning of the SCCM Server

Similar Questions

• Performance parameters to validate the performance of the managed server

  Hello

  We have 5 servers managed in weblogic domain, each managed servers on different unix box, we will decommission one of the managed server.

  Now the question is how, how we measure the impact on performance, load etc. of the managed servers. Once we have removed from service in 1 server load is managed by 4 servers now. How can we better measure the results here.

  
  Your advice and help is very appreciated.

  Thank you

  WLDF is designed with the use of production in mind. Performance will impact, of course, depends on how much and how often it will collect data. As a general rule, you pay only for the active components of WLDF. So, you can configure it in the production environment and allow him progressively according to the needs.

• Hot cloning - let the physical server running then?

  I have a question for the Vmware Converter. If I understand correctly, you can use hot Clone to clone a physical server while it is running. Of course, that seems very well so you don't get no downtime during conversion.

  But, if the reason for this conversion is to migrate from physical to virtual, what happens if the physical server continues to operate after the conversion? Even just a minute can be enough to have changed the original system, perhaps a database or other stuff, that will make the new virtual instance "incorrect."

  So how does this normally? If you want to virtualize a server that has a system that interacts with users either or other servers, how will stop instantly change?

  OK, even if you are in your downtime window it would be preferable to perform the validation of the server application.

  What we normally do, is check the event logs and do well for sure there no new errors that are produce after the p2v (physical 2 virtual), especially application or system related event.  We will also perform a few reboots of the (virtual) system and sometimes we also had to remove some old drivers.  We have sometimes came across problems with NETWORK cards keeping the old ipconfig when migrating.

  When supply us the new VM give us it a whole new value of intellectual property and test it with the other physical system down.  After correct validation go us ahead and leave the virtual running.  We usually have to master the physical machine in the datacenter for about two weeks and then begin the process of decommissioning.

  One thing most definitely, you want to do is make sure to install vmware tools on the virtual server.  I know it's probably obvious, but many people forget.

  Hope this helps,

  Chad King

• the archiving server

  We just migrated applications 7.1 to 11.1. The server that hosted 7.1 will be downgraded to in a few weeks. I want to make a backup of all applications on the Server 7.x and fix them. Could you please tell me how to do?
  
  I just tried this command on all cubes that I wanted to save. The file to archive output only the list of names of files in the app! No data! You are not sure if I understand any archive backup and recovery?
  
  * + < code start > * _
  
  CONNECTION < supervisor id > < password > on server71.americas.com;
  COIL on '\\server71.americas.com\essbase\appfiles\Migration\inf\BackupOldServer.inf ';
  
  CHANGE the database ARCHIVE of START SalesAPP.SalesDB file "D:\\Appfiles\\ARCHIVE\\SalesApp_SalesDB";
  
  Exit;
  
  * + < end of code > * _
  
  Also another thing to note is that there is a disk partitions on the old server which will be decommissioned. But on the new server, there is no any which disk partition so I'm not sure archive created the old server (7.1) can be restored to the new server (11.1). Help, please!
  
  Thank you!!

  the only thing your ordering of archive begin done on the server is to make the database to read only for some backup software could check in. As a better solution especially if all your data on your databases is loaded at the zero level would be to perform at a level zero export of all your data and then save the scripts of calc, reports, outlines of rule files, etc.. If you have export the column format, you could even bring in some parts of databases with rules files. A couple of caveats
  1. it will not work on databases ASO in 7, you must back up the directory
  2. If your database is very large, it could be problemic, although zero level data export is only much smaller
  3. If you are loading to levels other than zero (as for budgeting), then you need to export all levels of data. If zero, then you would just reagg the re-imported database.

  In any case, I would make sure that if all of this is backed up on tape, retension period is long enough for your needs. Before the server is out of service, I suggest you also a test they can actually restore the files. I saw him too often that files are not recoverable

• Unable to connect to the VPN server

  Hello

  I'm on Sierra, iOS macOS 10 and Mac OS Server 5.2 (on a Mac mini).  (All dated September 21, 2016)

  Because PPTP is no longer supported, I am trying to create L2TP.  Unfortunately, when I try to connect to the server, I get the error "the VPN server has failed. Please check the server address and try to reconnect. »

  I do not think it is a problem of networking: back to my Mac is not enabled, the appropriate ports are transmission (UDP 500, 1701, 4500) and server says that the service is accessible.

  When I check the logs from the server after a connection attempt, I find:

  21/09/16 21:08:09.994 raccoon [75993]: can't find configuration.

  21/09/16 21:08:13.285 raccoon [75993]: can't find configuration.

  21/09/16 21:08:16.578 raccoon [75993]: can't find configuration.

  21/09/16 21:08:19.884 raccoon [75993]: can't find configuration.

  Any suggestions?

  Does anyone know where the configuration file is supposed to be on the server, so I can look at?

  Thanks for your help!

  Hi Rick,

  -Check that the folder/etc/racoon exist and the folder contains psk.txt and racoon.conf.

  -Installed with the operating system.

  Cheers, dwbrecovery

• where to change the outgoing server

  Just put a ssl on my outgoing server and need to update the settings for the outgoing server. It seems that this function within thunderbird is incomplete. After some googling I was able to get to a place where I could drop to the bottom of all the servers, I entered, but the option to modify one of the existing servers wasn't in the drop down menu.

  Account of the actions dropdown also lacks an option to edit an existing account.

  If I click on manage identities I can find my user and click on 'Edit', however it brings me to the same choice window drop-down menu for which account I want to choose. It's funny because I pressed a button to change the settings of the account but never I was given a chance to change anything.

  So where should we do to change the outbound servers thunderbid?

  Open the account settings.
  Outgoing/SMTP Server is at the bottom of the left pane where all accounts are included. There is a button to edit an existing SMTP server.
  It is hard to Miss once you have the account of the Actions of the menu drop down.
  There is no option in the Actions drop account to edit an existing account. You can make changes directly in the window account settings for any server incoming which are listed there.

• How can I get the smtp server to NOT expire?

  I can receive emails on account of the problem, but I can't send it. I get the message, '.. '. connection to the outgoing server (SMTP) smtp.hughes.net has expired. Try again. »

  https://support.Mozilla.org/en-us/KB/cannot-send-messages

• Error message from the mail server to start with open Manager-password

  When I start TB the password manager ask me the master password.
  When I do not write the master password directly with in 60 seconds, I get an Errormessage of the Mail-Server!
  Why connect TB for the mail server before writing the master password in the InputMask password manager?
  Pref..:
  "mail.startup.enabledMailCheckOnce", false
  "mail.server.server1.login_at_startup", true
  "mail.server.server1.check_new_mail", true
  "mail.server.server1.check_time", 30
  "mail.server.server1.download_on_biff", true
  "mail.server.server1.headers_only", false
  "mail.server.server1.leave_on_server", false
  Fig 1 is directly after starting TB
  Photo 2 is after 60 seconds

  I guess that's the effect you described:

  When I do not write the master password directly with in 60 seconds, I get an Errormessage of the Mail-Server!

  You can try to install this add-on.
  https://addons.Mozilla.org/en-us/Thunderbird/addon/StartupMaster/

  This should stop from trying to access the account before entering the password to Thunderbird.
  Note, it is in no way a measure of security.

• I would like to know how to prevent messages sent to be registered on the SMTP server

  Currently, my Thunderbird client saves a copy of all messages sent to the folder "sent", as expected. All sent messages are also stored on the Server SMTP (G-Mail in this case). To avoid having to delete them manually, I want to warn the outgoing message to be stored on the SMTP server in the first place. Currently, my account of Thunderbird for Copies and folders settings has a check mark next to the option 'Other' with a destination of the folder option sent in Thunderbird. I don't see any other parameters that could control how sent SMTP mail server handles. I use the POP service only with the G-Mail Server. What settings should be in place to prevent messages accumulate in the folder "sent" on the SMTP server account?

  I think I can now answer my own question! The question turns out to be a g-mail not delivered not a factor controlled by Thunderbird.

  Apparently g-mail can automatically a copy of all mail sent by SMTP service one account. It's a "feature" that cannot be disabled! A workaround seems to be to set up a filter in g-mail account settings for all mail with an address corresponding to your own email address and send the message to the trash folder. Items in the Recycle Bin are automatically deleted after 30 days. Google prevents the rule 30 days being modified by measure of security, but at least trashed messages for irrevocably removed in a month.

• The mail server responded: 5.7.0 must issue a STARTTLS

  I checked that the settings of the server are also STARTTLS and TB updated to the latest version, restarted the computer.
  I always get the same message
  An error occurred while sending mail. The mail server responded: 5.7.0 must issue a STARTTLS command first. Please make sure your e-mail address is correct in your account settings and try again.

  You are showing us the entry window. Try again in the main Thunderbird window.

  Perhaps have you checked the parameters of the incoming (POP/IMAP) and not the outgoing (SMTP) settings?

• Using IMAP, how to reduce the size of local disk? Emails must remain on the IMAP server.

  Problem:
  My local disk is full (even with compacting emails).

  Condition:
  I use the IMAP protocol and have a lot of emails. I want all emails to stay on the IMAP server.

  Possible solution (that I couldn't know how):
  Only show the emails in Thunderbird.

  My experience:
  Parameter to 'retrieve only messages last 30 days' doesn't change anything (no doubt because the messages are already on the drive).
  Unsubscribe and re - subscribe folders doesn't change anything.

  Any suggestions?

  Yes, I just tried it with a one-time account and, it seems, everything is OK. Messages remain on the server, but there are only a few KB, taken on the local HARD disk.

• How can I change the SMTP server to any server I want to?

  This is a common situation, and I have seen many others ask a similar question. It is a simple question, but Thunderbird does not seem to allow it. In my case, I have a choice of two mail server outgoing. I can use my hosting company Godaddy or my Internet provider, the local cable operator Charter Web. By default, Tbird uses the same mailserver incoming and outgoing, if possible, so my e-mail account has been configured to use the outgoing Godaddy server.

  I would prefer, however, to use the local server SMTP of Charter. But I can't find any way to change to that of Tbird. I could do it in Outlook Express, because both servers are listed for each e-mail account and can be changed.

  In Tbird, there is a drop down menu to choose an outgoing server, with no way to simply type in a new server. Or am I missing something? I think not, because others report the same problem. I have vague memories that awhile back, Tbird would you allow to specify all server to an e-mail account settings and then test their validity before finishing - a manual of against an automated way to set up an account.

  The main thing is I want to review the outgoing server of what I want, but it doesn't seem to be a way to do it.

  When your problem has been fixed can you mark the thread as "solved" Please?
  Thank you.

• While the iPhone overseas requires a reactivation, which sometimes works, but more often does not work. At the beginning he said that my SIM card was not supported by the activation policy assigned by the activation server.

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  kennypg wrote:

  iPhone 6

  Network: Verizon

  iOS 9.3.3

  Twice now, once in Costa Rica in April and, more recently, in Ireland, while that phone overseas warning reads as follows:

  "your iPhone could not be activated because the activation server is not reachable. Try to connect your phone to the iPhone to activate it, or try again in a few minutes. If the problem persists contact Apple Support to Apple.com/support. »

  or:

  "The SIM card that you have currently installed in the phone is a carrier that is not supported in the title of the activation policy that is currently assigned by the activation server. This isn't a problem with the hardware with the iPhone. Please insert another card from a supported carrier SIM or ask this iPhone be unlocked by your operator. Please contact Apple for more information. »

  My carrier is Verizon and I replaced the SIM card on my return from Costa Rica end of April despite the fact that the card is unlocked and good, in theory, for international travel,

  Before you activate the phone is locked and I can't access applications like camera, that, when I travel, I need over the phone.

  Apple says call Verizon. Verizon said, you guessed it, call Apple.

  When I return to the States, everything works fine. I thought that the replacement of a SIM card would do the trick, so you can imagine my dismay when the activation warning came after I took the phone off airplane mode after I landed in Dublin and the activation warning came new.

  What is going on?

  I think it's a problem with Verizon.

  Our company is on AT & T - and our lawyer have travel all over the world, Africa, London, South East Asia and they have never complained to me than before.

• Thunderbird downloads emails from the mail server to its own server?

  Download Thunderbird and Horus email on its own server, or wiat for pull emails from my mail server until I have connect and download them?

  There is no 'server Thunderbird', so that solves the first part of your question.

  I don't know what you mean by "log in."

  Thunderbird, retrieves all in all, your messages from the server when you tell him, or you can configure it to do periodically.

  To access your messages, he must know the username of the e-mail account (very often all or part of your e-mail address) and the corresponding password. If you allow Thunderbird store the password, there is no need even to think of "connection" to the mail server.

  I said "basically" because with some IMAP servers, messages seem to be fed to Thunderbird as and when they become available, assuming he is alive and online.

• Why my emails are not deleted the gmail server when I remove it from my Inbox?

  I use POP on Thunderbird version 31.7.0. I put the box "Leave Messages on server" and box "until I delete them. (Some articles say that the message is "until I have delete or move them from the Inbox" but my option just says "until I delete them".) It is perhaps a matter of version). When I delete a message from my Inbox, it is NOT deleted from the gmail Server inbox. This means that I have to delete them in two places, which is a pain, and I will probably try a different e-mail program if I can't solve this problem. Can you please help me in PLAIN English. I'm not a techie.

  I read the email in Thunderbird and then deleted. I compacted files. Then, I went into the Inbox, gmail and up-to-date, but email is still there. I did all the steps in the correct order or is there something else I'm missing.