Decryption of Windows 7 Enterprise

Similar Questions

• Windows 7 enterprise - wireless network does not work at the office

  I'm a remote worker for a company.  I travel offices across the United States and hit this problem before, but thought it was just a transitory problem.  However, now I am in our headquarters and the problem has resurfaced.  Essentially, networks under Windows 7 Enterprise associates for wireless access points but cannot obtain a DHCP address.  I tried the usual: enough and ipconfig ipconfig / renew, I took it to our support people who confirmed that the configuration is correct, we have tried uninstalling the driver and put back in place, all in vain.  The configuration of the machine is:

  
  

  Dell Latitude E6400

  Windows 7 Enterprise x 64

  Wireless: Intel 5300 AGN

  Driver:

  Vendor: Intel

  Version: 12.4.1.4

  Digital signer: Microsoft

  Path: C:\Windows\system32\DRIVERS\netw5v64.sys

  The wireless works now in my office at home (I have a Windows 2003, Cisco 1200 AP domain and use WPA2 with PEAP to authenticate).  Please note that the configuration has NOT changed since the last time I was in this office (about 3 weeks ago).  We are a Windows 2008 R2 using NPS area (AFAIK).  Help desk support people are completely baffled.  The good news is that the cable works fine.

  I have included the following diagnostic report (with the suppressed SSID):

  ----------------------------------------------------------------------------------------------------

  Diagnostic information (wireless connectivity)

  Details on the diagnosis of wireless connectivity:

  
  

  Information for a diagnosis of connection

  The GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4

  Interface name: Intel(r) WiFi Link 5300 AGN

  Interface type: Native WiFi

  
  

  Connection incident diagnosed

  Auto Configuration ID: 9

  Login ID: 9

  
  

  State of the connection summary

  Connection started: 2010-11-30 14:12:24-133

  Profile match: success

  Pre-Association: success

  Association: success

  Security and authentication: success

  
  

  List of visible access points: 6 item (s) total, 6 article (s) poster

  BSSIDBSS Type PHY Signal (dB) channel/freq SSID

  -------------------------------------------------------------------------

  00-18-39-6E-51-6CInfra g-64 6

  00-13-1A-3B-EE-A0Infra g-57 6

  Da-ce-46-a2-9c-A1Ad hoc 6 g - 89

  00-13-1A-3B-F2-90Infra g-82 1

  00-1E-E5-A0-17-F0Infra g-53 2

  00-13-1A-3B-F0-20Infra g-91 11

  History of connection

  
  

  Information for Auto 9 Configuration ID.

  
  

  List of visible networks: 4 item (s) total, 4 article (s) poster

  Type BSS PHYSecurity Signal (RSSI) Compatible SSID

  ------------------------------------------------------------------------------

  Yes Yes Infrag 60

  Infrag Yes Yes 99

  Ad hocg No. 18 Yes

  Yes Yes Infrag 78

  List of favorite networks: 1 item (s)

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Defined by group policy: No.

  Connect even if the network is not broadcasting: No.

  Connectable: Yes

  
  

  Information for the login ID 9

  Connection started: 2010-11-30 14:12:24-133

  Auto Configuration ID: 9

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Pre-Association and Association

  The parameters of connectivity provided by hardware manufacturer (IHV): No.

  Security settings provided by hardware manufacturer (IHV): No.

  Profile matches network requirements: success

  Pre-association status: success

  The Association status: success

  Last AP: 00-13-1a-3b-ee-a0

  Security and authentication

  Configured security type: open

  Configured encryption type: WEP

  802.1 x protocol: Yes

  Authentication mode: Machine or user

  EAP type: authentication not started

  Number of 802. 1 X restarts: 1

  Number of failures of 802,1: 0 X

  802.1 x status: success

  Key exchange initiated: Yes

  Received unicast key: Yes

  Received multicast key: Yes

  Number of security packets received: 9

  Number of security packets sent: 7

  Decision of the attempt: success

  Connectivity

  Package statistics

  NDIS Rx: 1725

  NDIS Tx: 0

  Unicast decrypt success: 1

  Multicast decrypt success: 0

  Unicast decrypt failure: 0

  Multicast decrypt failure: 0

  Rx success: 1531

  Rx failure: 0

  TX success: 5

  TX failure: 0

  Try TX: 0

  TX retry number: 0

  Life expectancy exceeded TX maximum: 0

  Failure of TX ACK: 0

  History of roaming: 0 item (s)

  
  

  Information for Auto 8 Configuration ID.

  
  

  List of visible networks: 1 item (s) total, 1 article (s) poster

  Type BSS PHYSecurity Signal (RSSI) Compatible SSID

  ------------------------------------------------------------------------------

  Yes Yes Infrag 80

  List of favorite networks: 1 item (s)

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Defined by group policy: No.

  Connect even if the network is not broadcasting: No.

  Connectable: Yes

  
  

  Information for the login ID 8

  Connection started: 2010-11-30 12:56:40-041

  Auto Configuration ID: 8

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Pre-Association and Association

  The parameters of connectivity provided by hardware manufacturer (IHV): No.

  Security settings provided by hardware manufacturer (IHV): No.

  Profile matches network requirements: success

  Pre-association status: success

  The Association status: success

  Last AP: 00-13-1a-3b-f0-20

  Security and authentication

  Configured security type: open

  Configured encryption type: WEP

  802.1 x protocol: Yes

  Authentication mode: Machine or user

  EAP type: authentication not started

  Restart of number of 802. 1 X: 2

  Number of failures of 802,1: 0 X

  802.1 x status: success

  Key exchange initiated: Yes

  Received unicast key: Yes

  Received multicast key: Yes

  Number of security packets received: 13

  Number of security packets sent: 11

  Decision of the attempt: success

  Connectivity

  Package statistics

  NDIS Rx: 0

  NDIS Tx: 0

  Unicast decrypt success: 1

  Multicast decrypt success: 0

  Unicast decrypt failure: 0

  Multicast decrypt failure: 0

  Rx success: 2262

  Rx failure: 0

  TX success: 59

  TX failure: 0

  Try TX: 19

  TX retry multiples: 5

  Life expectancy exceeded TX maximum: 0

  TX ACK failure: 26

  History of roaming: 1 item (s)

  Schedule: 2010-11-30 12:57:48-302

  Roamed from BSSID: 00-13-1a-3b-fa-f0

  Reason: 0 x 00000003

  Disconnected from BSSID: 00-00-00-00-00-00 reason: 0 x 00000205

  
  

  Information for Automatic Configuration 7 ID.

  
  

  List of visible networks: 1 item (s) total, 1 article (s) poster

  Type BSS PHYSecurity Signal (RSSI) Compatible SSID

  ------------------------------------------------------------------------------

  Infrag Yes Yes 99

  List of favorite networks: 1 item (s)

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Defined by group policy: No.

  Connect even if the network is not broadcasting: No.

  Connectable: No.

  Reason: 0 x 00028002

  
  

  Information for the login ID 7

  Connection started: 2010-11-30 12:55:47-670

  Auto Configuration ID: 7

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Pre-Association and Association

  The parameters of connectivity provided by hardware manufacturer (IHV): No.

  Security settings provided by hardware manufacturer (IHV): No.

  Profile matches network requirements: success

  Pre-association status: success

  The Association status: success

  Last AP: 00-13-1a-3b-fa-f0

  Security and authentication

  Configured security type: open

  Configured encryption type: WEP

  802.1 x protocol: Yes

  Authentication mode: Machine or user

  EAP type: authentication not started

  Number of 802. 1 X restarts: 1

  Number of failures of 802,1: 0 X

  802.1 x status: success

  Key exchange initiated: Yes

  Received unicast key: Yes

  Received multicast key: Yes

  Number of security packets received: 13

  Number of security packets sent: 11

  Decision of the attempt: success

  Connectivity

  Package statistics

  NDIS Rx: 0

  NDIS Tx: 0

  Unicast decrypt success: 3

  Multicast decrypt success: 0

  Unicast decrypt failure: 0

  Multicast decrypt failure: 0

  Rx success: 288

  Rx failure: 0

  TX success: 49

  TX failure: 0

  Try TX: 19

  TX retry multiples: 5

  Life expectancy exceeded TX maximum: 0

  TX ACK failure: 28

  History of roaming: 1 item (s)

  Schedule: 2010-11-30 12:56:36-732

  Roamed from BSSID: 00-00-00-00-00-00

  Reason: 0 x 00000007

  Disconnected from BSSID: 00-00-00-00-00-00 reason: 0 x 00000205

  
  

  Information for the login ID 6

  Connection started: 2010-11-30 12:55:38-275

  Auto Configuration ID: 7

  Profile: Discovery connection

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Pre-Association and Association

  The parameters of connectivity provided by hardware manufacturer (IHV): No.

  Security settings provided by hardware manufacturer (IHV): No.

  Profile matches network requirements: success

  Pre-association status: success

  The Association status: success

  Last AP: 00-13-1a-3b-f0-20

  Security and authentication

  Configured security type: open

  Configured encryption type: WEP

  802.1 x protocol: Yes

  Authentication mode: disabled (5)

  Restart of number of 802. 1 X: 3

  Number of failures of X 802,1: 1

  802.1 x status: failure 0 x 00000000

  802.1 x reason code: 0 x 00050006

  Key exchange initiated: No.

  Number of security packets received: 8

  Number of security packe

  Diagnostic information (wireless connectivity)
  Details on the diagnosis of wireless connectivity:

  
  

  For all the info on this session, see the event information of wireless connectivity.

  
  

  Helper class: Auto-Configuration

  Initialize status: success

  
  

  Information for a diagnosis of connection

  The GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4

  Interface name: Intel(r) WiFi Link 5300 AGN

  Interface type: Native WiFi

  
  

  Result of diagnosis: there may be problem

  
  

  Diagnostic information (wireless network adapter)

  Details on the diagnosis of wireless network adapter:

  
  

  For all the info on this session, see the event information of wireless connectivity.

  
  

  Helper class: Native WiFi MSM

  Initialize status: success
  
  
  Information for a diagnosis of connection
  The GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4
  Interface name: Intel(r) WiFi Link 5300 AGN
  Interface type: Native WiFi
  Profile:
  SSID:
  SSID length: 10
  Connection mode: Infra
  Security: Yes
  Connect even if the network is not broadcasting: No.
  
  
  Result of diagnosis: there may be problem
  ----------------------------------------------------------------------------------------------------
  
  
  That's about all.  If anyone can provide any indication as to why it would suddenly stop working, I would appreciate the help to solve this problem.
  
  Ido
  
  

  Ido Dubrawsky,

  Thank you for visiting Microsoft Answers!

  The question you have posted is related to networking in a commercial environment and would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite X 200 - 23 G and Windows 7 Enterprise

  I had Vista Ultimate x 64 VL (Volume License) on my * Satellite X 200-23 G + PSPBUE + * has worked like a charm. Now install * Windows 7 Enterprise x 86 VL * on this...

  Many devices automatically recognized and drivers to install during the installation of the OS.

  Some of those missing Windows/Microsoft update found and installed.

  Still a few missing drivers:
  1 3D video controller
  2. Mass Storage Controller
  3 PCI memory controller
  4 unknown device (* ACPI *------TOS6205 under + Hardware Ids + on + Details tab +)

  Now,.
  any suggestions on the drivers to use since Tohiba supports only XP and Vistas both x 86 and x 64 on the [drivers Toshiba download Webpage | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]?

  I'll try to install using drivers designed for Vista x 86 (which I am curently downloading) - but any suggestion expertise in the meantime?

  To fix these:

  (1) download the Toshiba page display driver - I used the pkg of display-en-20080407-162339 and it works fine (I'm on windows 7 64 bit)

  (2) the "mass storage controller" is the controller of the memory flash card - drivers are again on the Toshiba site

  (3) the controller memory PCI driver you will need to download on the Intel site - you want to IATA89ENU.exe you will find in the page of Intel (matrix) Storage Manager.

  (4) this is the bluetooth controller, drivers are once again on the Toshiba page.

  Rick

• EliteBook 820/840 G3: EliteBook 820/840 G3, Windows 7 Enterprise x 64: LAN/WLAN, switch does not

  Unable to get LAN/WLAN switch to work. The setting is enabled. The LAN WLAN connections and remain active at the same time.

  G3 EliteBook 820 and 840 G3

  Windows 7 Enterprise 64-bit

  BIOS is updated (01.07 Rev.A (June 6, 2016))

  All the drivers are up to date as of today (2016-06-23)

  Have reset to the default values for several times.

  Without success.

  Any idea?

  TIA & BR

  If you install the HP Hotkey support 6.2.18.1 Rev.A. then it works

• Problems of Z580 Windows 7 Enterprise

  I clean installed Windows 7 Enterprise to my 12 GB of ram supported by the OS.

  But rather the laptop is faced with several problems: -.

  1. horribly slow boots (2mn +) (even taking over after the hibernation is long)

  2. the full use of the CPU after start

  3. frequent lag during use

  I guess the problem is somewhat with GPT formatting the HARD drive - Windows did not have the MBR on EFI disks

  PS No bios update is available, I tried all the fixes, no luck...

  Help, please...!

  Specifications of the PC: -.

  Core i5 3210 M - 2.5 ghz

  12 GB of ddr3 memory

  hard drive 500 gb/5400 RPM

  1 gb nvidia 630 m

  graphics Intel hd 4000

  Try to reduce the 8 GB ram. I don't think that z580 supports more than 8 GB of ram.

• Windows 2008 Enterprise Edition to recognize the more 2.1 TB hard drive?

  I have several questions:

  1. I have Windows 2008 Enterprise 32-bit Edition and not to recognize the more 2.1 TB hard drive.  What should do to recognize the hard drive?

  2. There are Windows 2008 Standard Edition R2 32 bit?

  3. it is possible to update Windows 2008 Enterprise Edition 32-bit on Windows 2008 Enterprise Edition R2 32 bit?

  Thank you.

  Support Windows Server is in the server instances, these forums are for individuals.  Try rather questions here:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• move Windows 8 Enterprise n to Windows 8 Pro

  I currently have Windows 8 Enterprise N RTM installed on my PC at home (for work purposes). Now, I want to buy Windows 8 Pro for my personal use. Is it possible to go from Windows 8 Enterprise N to Windows 8 Pro without losing my settings/applications/etc?

  Thanks in advance!

  As far as I know, he is not.  ANY victory 8 s must be installed clean.  If you configure a second partition, you can use the wizard for easy transfer to import SOME of your data.

• Network outage everything in Windows 2008 Enterprise upgrade to Windows 2008 R2, Enterprise Edition

  I have Windows 2008 Enterprise Server & upgraded to windows 2008 R2, Enterprise Edition. After you run the file setup.exe in windows 2008 R2 Enterprise to halfway to the server went out of network. I used the DRAC/ILO to check the server, the upgrade was underway. After up gradation finished, the found the network card is initially as new connection with all «automatically get them DHCP address» I check in 5-6 servers to upgrade all servers in jailbroken with N/W card. Why it's happening? upgrade breaks the network?

  Hello Guys.Danger,

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• Install Windows 7 Enterprise on Veriton x4640g

  We have recently acquired 30 x Veriton x4640g that comes preloaded with Windows 7 Professional. I tried to install the version of Windows 7 Enterprise and continues to freeze on the language selection / time zone all day.

  Although there is nothing wrong with Windows 7 Professional, it is a company policy to install only Enterprise Editions of Windows on all of our systems due to the volume of licenses and standardize the whole environment.

  I changed the BIOS to UEFI Legacy mode, tried to install from a DVD and USB, I even used to different brands of DVD and USB but the problem persists.

  My next step is to upgrade the BIOS to see if that helps, a start-up network also suggested colleague via the Windows Deployment Services, I doubt that will solve the problem, but I'm grabbing at straws here any suggestions.

  So after a lot of noise I just got an e-mail from my IOC that acer will send someone during an update on all the machines we bought recently and which should solve this problem. They could have just sent me the tool and I could have done myself, or maybe they don't want to share with us.

• T500 with Windows 7 Enterprise (x 64) Ricoh drive/SD card randomly disappears

  I got a T500 (2082-5XU) running Windows 7 Enterprise (64-bit) with 4 GB of RAM. I have been using a 8 GB SDHC card into the Reader/slot for card SD Ricoh as a ReadyBoost drive.

  Recently, I noticed that the SDHC card will disappear at random from the list of devices with removable storage. In some cases when this happens if I physically eject the SDHC card and plug it in again, the storage reappears. In many cases, I can delete and add the SDHC card repeatedly and it will never be displayed.

  I am unable to make head or tail of what could be the cause. It does not seem serious if I'm coming from a cold start or return to hibernation. I do not use standby mode. I even went up to remove the device driver package and install again. As far as I know, the latest version for this is at http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73713. That's what I have currently installed. I installed it like myself and I have tried to install it with the administrator account local system without any change in behavior.

  Has anyone else encountered this problem? Is it possible that this is a hardware problem? I don't remember if I encountered a similar problem under Vista Business (32 bit) on this same system.

  I tried a search, but found that none of the results seems to fit this particular situation. But, if anyone knows another topic where this problem has been reported, I would be happy to chime in there, too.

  Thanks in advance.

  At this point, I think that this SDHC card went bad. I have a compatible USB SDHC card reader and I can't even read this unit off.

  Thanks for the suggestion to try another SD card. I'm embarrassed to admit that it didn't even occur to me to try another SD card. Probably because I forgot I had an extra laying around.

• Windows 7 Enterprise Edition (32-bit) drivers are missing

  I have a laptop HP Probook 440 G1 with Windows 7 Enterprise edition installed. I am unable to find drivers for the publishing business on the HP support page. Help, please.

  Kind regards
  Indian techno
  Any sufficiently advanced technology is indistinguishable from magic.

  He would not make a difference.

  The only difference is the size of the screen.

  Just use the drivers from the G1 430 page instead...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5379212&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswEnvOID%253D4053%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Problems installing of printer 1022n w / Windows 7 Enterprise

  My workplace has climbed to Windows 7 Enterprise (64-bit), and I'm currently not able to use my HP 1022n printer.

  I found the site to download the driver 1022n, but to halfway through the installation process I get an error message that the driver is not connected to a USB port on my computer. But it IS connected, and I tried all ports. (I also tried unplug, disconnect, turn off and then reconnect, reconnect and switch on everything.)

  The printer worked fine with my old computer, a 32-bit machine running XP and it is supposed to work correctly with Windows 7 64 - bit, too, but I'm stuck at this point.

  FYI, I use the HP1022n as a stand-alone printer, not through a network.

  I have run the HP tool and simply get the diagnosis that the printer is not installed.  I checked the printer spooler, too, which is started and set to automatic.

  Any advice would be appreciated.

  In 'other devices '.

  Rerun the update driver, but this time, click Browse my computer for driver software.

  Click on let me pick from a list of drivers for devices on my computer.

  Some printers > next

  Under manufacturer > choose HP

  Under printers > scroll down and select HP LaserJet 1020

  Click Yes in the warning popup

• Can t Install Wireless Driver for HP 14 - D002TX Windows 8 Enterprise edition

  Dear HP Support Forum,

  I just buy HP Pavilion 14-D002TX, I can't find the right driver for the wireless, I already try a lot of driver wireless on your official website. The problem is when I want to install, it's just disappear during the installation of progress, I don't know what the problem, please I need your help.

  FYI, so far I have already try this wireless driver (all disappear when installing progress):

  1 sp63302 - Mediatek 802.11 Wireless LAN Adapter Driver 2013-09-19, Version1.00

  2 sp64825 - Mediatek 802.11 Wireless LAN Adapter Driver 2013-12-13, Version5.0.37.0

  3 sp65048 - Qualcomm-Atheros QCA9000 series Wireless LAN Driver for Microsoft Windows 2014-01-10, Version1.00

  4 sp65168 - Realtek RTL8188EE 802.11bgn Wireless LAN Driver for Microsoft Windows 2014-02-19, Version2012.7.1231.2013

  5 sp66088 - MediaTek (Ralink) 802.11 Wireless LAN (WLAN) adapter 2014-04-17, Version5.0.45.0

  6 sp64786 - Realtek Wireless LAN Driver 2013-12-12, Version1.00 802.11bgn RTL8188EE

  7 sp58586_Ralink-WLAN

  And the driver that is already properly installed (in order):

  1 chipset sp64395
  2 NVIDIA sp64346
  3. audio sp64511
  4 IMEI sp64344
  5 LAN sp64340
  6 Bluetooth sp65235
  7. wireless button sp63752
  8 card Reader sp64512

  I use Windows 8 Enterprise

  Thank you for your kindly reply & Attention.

  Best regards

  Huang.

  Hello:

  This is the driver you need...

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_128686_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Bluetooth:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_126765_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Safty family does not appear on Windows Vista Enterprise

  I have a laptop running Windows Vista Enterprise, the problem is I want to implement security for the family, but I can't! Help, please. The control panel says only 'user accounts', not 'accounts of users and safety.'

  Hello

  Have you read what on what to do?

  http://Windows.Microsoft.com/en-us/Windows-Vista/protecting-your-kids-with-family-safety?SignedIn=1

  After that the above then read this

  http://blogs.msdn.com/b/ie/archive/2006/03/01/family-safety-on-Windows-Vista.aspx

  See you soon.

• Windows Media Center & Windows 7 Enterprise N

  I have installed Windows 7 Enterprise N, I do not find windows media center, what can I do?

  
  

  
  

  Hi Maher28,
   
  N edition and the operating system Windows 7 KN edition do not include Windows Media Player or other technologies related to Windows Media, such as Windows Media Center and Windows DVD Maker. Therefore, you must install a separate media player in order to perform the following actions:

  ·   Play or create audio CDs, DVD-video and media files

  ·   Organize content in a media library

  ·   Create playlists

  ·   Convert audio CDs to media files

  ·   Show media title and artist information

  ·   See album art on the music files

  ·   Transfer music to personal music players

  ·   Recording and playback of television programs

  The features in the N editions are the same as their equivalent versions complete as well as the same price, but do not include Windows Media Player. Windows Media Player can be downloaded for free from Microsoft for these editions.

  You can download Media Feature Pack for Windows 7 N and Windows 7 KN using the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=31017ed3-166a-4C75-b90c-a6cef9b414c4&displaylang=en

  See the Microsoft article below which talks about the same.

  Description of the Windows Media Feature Pack for Windows 7 N and Windows 7 KN
  http://support.Microsoft.com/kb/968211

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.