Safty family does not appear on Windows Vista Enterprise
I have a laptop running Windows Vista Enterprise, the problem is I want to implement security for the family, but I can't! Help, please. The control panel says only 'user accounts', not 'accounts of users and safety.'
Hello
Have you read what on what to do?
http://Windows.Microsoft.com/en-us/Windows-Vista/protecting-your-kids-with-family-safety?SignedIn=1
After that the above then read this
http://blogs.msdn.com/b/ie/archive/2006/03/01/family-safety-on-Windows-Vista.aspx
Tags: Windows
Similar Questions
-
HP P6130Y: Secondary hard drive does not appear in Windows Vista - 64 Bit
I installed the second SATA drive in my HP 6130Y, a 1 TB WD Black. HE appears during startup, is displayed in the home page of the BIOS password HP PC-Doctor and SMART BIOS tests.
But he does not appear in Windows Vista 64-Bit.
My current setup is configured as follows:
- SATA1 - Seagate 750 GB SATA drive
- SATA2 - DVD
- SATA3 - new WD 1 TB drive.
- SATA1 controller is set to RAID.
Thanks for any help you can provide!
Hello
Go to Administrative Tools--->---> Disk Management in the computer management and expand the screen entirely.
Now, look for the new drive, right mouse click on it if you see initialize and then format the new hard drive.
-
My DVD drive does not appear in Windows Explorer
This morning my computer ran a scan virus and other things, and when this was done, my computer will not respond to any type of CD. No DVD, CD or even disks with files stored on them.
When I open windows Explorer, the drive from DVD (e) is not even more appear. I was wondering how to fix this.Hello
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good. -
Combo DVD/CD drive does not appear in Windows Explorer or the Device Manager
The combo DVD/CD on my laptop drive isn't in Device Manager or Windows Explorer. The door is not ejected. You must use a paperclip, poking into the hole to open it. I also re - it sitting, but it changed nothing. We had this laptop for 1.5 years and the disk worked great until yesterday when trying to install Starcraft II. Installation failed and it has messed up also the DVD/CD drive.
We read some other difficulty advice and tried the upper and lower filters in the registry, but there was no entires of upper and lower filters in the key.
The specifications of the laptop are:
HP Pavilion dv7
Processor Dual-Core Mobile RM-72 2.10 GHz AMD Turion X 2
4 GB OF RAM
64-bit Windows Vista
Hello
Check with HP Support, their online documentation and drivers, and their known forums
questions.Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Question
better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
DetailsIn current versions of Flash you can also do this via the control panel.
- Control Panel > Flash Player, click on remove and erase data
-
sound does not play when windows vista starts or stop
sound does not play when windows vista starts or stop
Hello
- When the issue started?
- Will there be any changes made prior to this issue?
- Otherwise, the sound works well?
Step 1: Refer to "the startup sound is not played correctly when you start Windows XP or Windows Vista
' http://support.microsoft.com/kb/321735 '.Step 2: To change the sound on closing down.
Audio a.Open and Sound themes by clicking the Start button, clicking Control Panel, hardware and sound, and then clicking sound.
b. the sounds tab and then, in the list programs, select the event you want to change the sound.
c.Under sounds, click the sound you want to associate with the event. If the sound you want to use is not listed, click Browse to locate it.
'Change the sounds of the computer '.
": http://windows.microsoft.com/en-US/windows-vista/Change-computer-sounds "Diana
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Why CRYSTAL_REPORT program does not work with windows Vista? __
Why CRYSTAL_REPORT program does not work with windows Vista?
http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx
Windows Vista Compatibility Center
First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/
If this is not Vista compatible, read the info on the link above.
It works for some programs, but not all.This applies to software programs, NOT hardware drivers.
If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.
See you soon.
Mick Murphy - Microsoft partner
-
Windows displays the device works correctly. However, the device does not appear in windows Explorer. also, I can not format disks.
What should I do next
Hello
- Are you referring to the NEC USB Floppy Driver?
- You try to format floppy disks?
- Was - this earlier work, if so, did the chnages on the computer before this problem?
If it worked, I suggest the following methods and check the status of the issue.
Method 1:
Open the hardware and devices troubleshooter.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
Update a hardware driver that is not working properly.
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
-
CD/DVD drive does not appear in Windows 8
My CD/DVD drive no longer appears in Windows Explorer in point 8.1 of Windows on my desktop HP Pavilion Slimline 400-034. The disc rotates during startup. I tried the troubleshooting of Microsoft Window 8 with no luck. I would try the HP troubleshooting which requires access BIOS when booting, but by pressing F10 at startup me does not BIOS but Windows load normally. Any suggestions to at least help me get the BIOS?
Solved! No. thanks to HP. Even if I had never opened the file on my PC and make sure that the cable DVD could not be disconnected, I decided to look for. Much to my surprise, he has been disconnected - but not by me - by a HP technician. I remembered that I had to return the PC to HP to replace the power supply warranty in June 2014. Not only have they not reconnect the cable SATA DVD, they put the cable from the hard drive in the MB connector where the DVD cable was supposed to be. After trial and error and insert the DVD cable in the 3 open SATA connectors with no luck, and finally move the cable from the hard drive to another connector and put the cable DVD where the cable from the hard drive was, the DVD has been recognized by Windows and working correctly. Thanks to HP for the many hours I lost to try to correct their mistake.
-
Original title:
Everything was fine until yesterday. Juice now, when I plugged the external HD into the USB port it does not appear in the 'my computer' window. It is recognized by the computer as it is present on the list of the "Disk Clean Up" and it also appears when I click on ' Safe Remove Hardware ' on the taskbar. But if she does not appear in the 'my computer' window I can't work with it or don't even know what it I have arquived in it.
Trying to find a solution, I realized that same 'information system' to 'System tools' is also not available. Pops up a window saying that "Windows cannot open help and Support because a system service is not ongoing enforcement. " To resolve this problem, start the service named help and Support '. OK, I tried to open 'Help and Support' ' Start Menu ' and the same window appeared again to "not have a system service that runs". I don't know what her soul precisely and I have not the slightest idea of what I need to do to correct this 'disappearance' of Service 'system '. There is nothing without the appearance of HD in the window of thw work? Everything else works fine and the calculation is virus-free. What should I do?
Hello
You did changes to the computer, before the show?
Solution A:
For the problem with the external drive not appearing is not in Windows Explorer, see the following methods.
Method 1:
Check out the following link.
A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
http://support.Microsoft.com/kb/925196
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 how to back up and restore the registry in Windows
Method 2:
Connect the external hard drive on another USB port and check.
Solution B:
For the problem with the help and Support, check if the service is enabled.
a. click Start, click run. In the Open box, type services.msc and press ENTER.
b. right-click on the service called Help and Support , and then select Properties.
c. under the general tab, set the type Startup to Automatic and click Start.
d. close the services window and check for the issue.
-
USB key does not appear in windows 7 sys.
When the USB key is inserted it does not appear when the "computer" is selected. I can not get information outside or inside. If I go to "defraggler" it appears in the list readers here.
Help, please.
RBMaybe this drive letter is hidden. You are able to access the drive by typing the path or the drive letter in the address bar to explore or the run [Windows key + R] dialogue box?
-
OSX Yosemite, DW CCS, does not appear the window 'Title' on the TOP BAR
The "Title" window does not appear on the top bar. And I could not find how do.
If you make reference to the title bar on a web page, look in the mode code for this couple of tag
Insert page title here -
Essbase server does not appear in windows (11.1.2.1) services
Hi all
Essbase server does not show in windows 11.1.2.1 services. When I checked the Task Manager processes, it is there.
Kind regardsThe windows service for essbase in 11.1.2.x is an OPMN "Oracle process manager...". »
See you soon
John
http://John-Goodwin.blogspot.com/ -
Little Larousse 2010 does not work in Windows Vista
I installed the software the little larousse dictionary 2010. But when I want to run it I discover the error that I have to reinstall again. But when I reinstall the error appear again. For the first time the program has run but with bad Graphic. What should I do or change in windows to run it?
I don't know why the program will not install correctly. Maybe it's not compatible with Vistahttp://www.microsoft.com/windows/compatibility/windows-vista/default.aspx. Try running it in compatibility mode to see if that makes a difference:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-compatibility-mode/.
If not, what is the EXACT error message during installation? When you say bad graphics, hear you text is fine and it is only the graphics that are a problem?
When you perform the installation, right-click on the installation icon and click on run as Admninstrator to see if that makes a difference.
If this does not work, try a boot minimum http://support.microsoft.com/kb/929135. If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem. Follow the procedures described in the article. Once found, remove, delete, disable or uninstall. Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
? Photoshop elements 8 Organizer does not open on Windows Vista?
I installed Photoshop Elements 8 on a Windows Vista computer and saved. The organizer has opened with thumbnails broken throughout and I couldn't update the thumbnails. So, I closed the organizer and opened it again, hoping it would clear up. Instead, the organizer would not open at all, and I was not able to open the organizer since.
Despite several requests for Support, Technical Support could not help. They said to uninstall components and reinstall, but when I uninstalled it, the screen of the software disk says I must first disable my serial no throwing items 8 and will help > deactivate.
However, when I launched 8 elements, a screen will appear with a choice of either a free trial or to enter my serial number. I have entered my serial number and got a red 'X', and it would not accept the serial number. Technical support says that there is nothing wrong with my serial No.
Technical support then said to download the Evaluation Version. I did it, but could not open the trial either!
Message:
"The files currently in use. Some issues that needed to be updated are currently in use. »
"The following applications use files that ORT should be updated by this Setup.
Close these applications and click Retry to continue.
Organizer - Photoshop Elements.
So he thinks my organizer is open and using files, and it is not open. I can not open!
I clicked on try AGAIN and got the same message.
I clicked IGNORE and it was installing files, arrived almost at the end, said 'product registration', then said "roll back the action" and started to go backwards.
I had uninstalled my Elements 7 software because I intend to use now 8 elements. I decided to reinstall 7 elements to use while I was dinking autour with version 8 and now it gave me the same message:
the serial number is an error, or is already in use by someone else!
Now I can't use either 7 or 8.
Help! Does anyone know how to disable a serial No., when the software has already been uninstalled? Can it be done?
Hello
The error message that you've shared below will come where say for some reason any Organizer.exe is still running in the Task Manager and you try to install the PES.
If installation is back up to the end, then delete the cache.db which is located at the following location and try to install again. This step has fixed the problem for many users.
C:\Program Files\Common Files\Adobe\Adobe PCD\cache\cache.db
Also, before trying to install PES 8 new, delete the files in the folder folder and then try again to install. Since then, the serial number is already checked as correct, that you shouldn't be running on these issues. If you are still not able to move forward after following instructions above, then please reply back and we can connect through internet session and I can try to look into your machine and see what all I can help you.
Kind regards
Ankush
Maybe you are looking for
-
Hello, I have an iPhone 6. I was using my iPhone today, and it worked normally. I blocked the phone and about two minutes later, click on the home button to check the time. The screen was black with a series of mobile, horizontal, white lines going d
-
recently, yahoo mail want to visit my home page every time I connect
Recently, yahoo mail wants to make me my homepage I see not my email until I close or agree. This happens every time, I made my home page and the message disappeared changed it back to my old home page and the message appears. It's firefox or yahoo t
-
Sharing family. Why can't someone be more a family member?
Sharing family. Why can't someone be more a family member? i.e. My daughter in my family and, as part of its family of partners.
-
New object VI - constant variant [VI script]
Hello world I write very important program for me and I have a problem. I use the script VI component and I'm trying to generate constant Variant. I use the special function as new object VI to this task. This very simple look, but... This implementa
-
Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly. How can I rebuild the icon cache solves this problem