Default encoding for new notebook XP UTF-8 documents

Similar Questions

• By default the encoding UTF-8 for new notebook documents

  Short with the help of a third party editor, is it possible to configure Notepad so that new documents are automatically saved in Unicode without having to manually change the encoding every time default ANSI to UTF - 8?

  Typical scenario:

  -Start typing text without extended characters
  -Save the file: it is automatically in the ANSI format
  -Open the file again to edit, add extended characters, save again:
  Notepad shows you the extended characters will be lost if you confirm the save operation.

  The last message offers the possibility to backup and "save under" to choose UTF-8, but 1) it's very heavy and 2) with any of the extended characters, the files will always be saved in default ANSI.

  Windows will be really fully Unicode if the default Notepad encoding is always obsolete ANSI code page, but, even though I admit reluctantly changing default behaviours is sensitive for reasons of compatibility, should have at least a user option to select the default encoding for new documents, as other third-party offer , like Notepad ++.

  Currently, Windows forces me to replace the file associations notebook to use other text editors. Not a bad thing, given the bad set of features in the notebook, but it would have been nice to have this option in the standard operating system

  1. right click-> New-> text Document
  2. open "new document texte.txt. Do not type anything!
  3. go in "file-> save under...". "and choose UTF-8 slot" Encoding: ", press 'Save' and replace the existing file. Close the file.
  4 rename "New document texte.txt" to "TXTUTF - 8.txt.
  5. copy 'TXTUTF - 8.txt' to 'C:\WINDOWS\SHELLNEW.
  6. go to «Start-> Run...» "and the type
  ---------
  Regedit
  ---------
  Press OK.
  7. navigate to
  -------------------------------------------
  HKEY_CLASSES_ROOT\.txt\ShellNew
  -------------------------------------------
  8. right click in the right window-> New-> "String Value" and rename it to
  -----------
  File name
  -----------
  9. double-click on "Filename" and put
  ----------------
  TXTUTF - 8.txt
  ----------------
  in "value data:"on the ground, then press OK. '
  10. it's over.
  11 test: create document .txt (right click-> New-> text Document). Open and go to "file-> save under...". "and see the encoding is set to UTF - 8 by default. :-)

  Credits go to Robert Clemenzi and his explanation of the string "FileName" (and its links with the "directory") in the registry:
  http://MC-computing.com/WinExplorer/WinExplorerRegistry_ShellNew.htm

  NOTE: These steps are ONLY for create .txt UTF-8 new and blank documents. If .txt is already registered with ANSI encoding, it will stay ANSI when recording it next time - if UTF-8 is required (in this case), so it must be assigned manually.

  PS Also modify values DWORD "fSavePageSettings" & "fSaveWindowPositions" to "1" in the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Notepad

  Info: http://www.pc1news.com/saving-changes-to-notepad-configuration-1216.html

• change default location for new virtual machines programmatically

  I know that you can change the default location for new virtual machines through the preferences GUI, but I want to be able to change it for all those who use VMWare Workstation in my company, so that it is more advanced to the personal folder of the user.

  Where exactly is stored?  I don't see in the registry.

  Thank you!

  WS does not use the registry to store settings.

  Set the path in UNK for each user:
  prefvmx.defaultVMPath = "F:\. »

• How to set a default calendar for new events in the calendar on Macbook Pro

  Although I have studied this issue in forums, I'm still without resolution. New default event for the calendar of 'Calendar' in the game on my Mac of calendars even when it is initially unchecked and hidden in the calendars list.

  I don't see a place in the calendar preferences or in system preferences > iCloud to make changes. I would like new events, write in the default calendar for "Calendar" calendar in my iCloud.com account.

  Any thoughts?

  Well, here's the scoop:

  To set the default calendar, open the calendar, choose calendar > Preferences, and then click general.

  Default calendar

  The calendar where new events are added by default. If you choose "Selected calendar", then the calendar highlight in the calendar list is the default calendar.

  

• Change the default value for new messages of the 'paragraph' in "text" format the answer currently online because it does not work

  The answer currently online for this problem said to follow the sequence "tools-options-composition" and then change the default value, but this sequence "tools-options-composition" does not exist in Thunderbird (at least in the version I have, 45.4.0). Under 'tools', there is no option 'options... '

  It can depend on what menu you look and which operating system you are using.

  Tools | Options | Composition refers to the menu bar on top old.

  You can use alt or F10 to make the menu appear temporarily. Go to the view of . Toolbars and check the boxes if you want it constantly on the show.

  If you use the button 'Menu of the Application' new fashion (with three horizontal lines - see the attached picture) then it's probably Options | Options | Composition -I say 'probably' because I'm on Linux where 'Options' are replaced, I think that, by "Preferences". Another complication with this infernal Application Menu is that different things happen depending on whether you click or hover. Place the cursor on the Options of the first and the second appears after some time.

  See http://kb.mozillazine.org/Menu_differences_in_Windows, _Linux, _and_Mac of the differences in Windows, Mac and Linux menus.

• Can I change the default folder for new documents Pages?

  When I run the application Pages, the first thing I see is a Finder window. For some reason, this Finder window invariably opens, not with the Documents folder, but in a specific subfolder of the folder images. Sometimes I use this folder as source for the photos that I insert into documents, but I don't want to see this folder every time I run the application Pages.

  How can I control this behavior? I see nothing in the preferences page to set a default value.

  When you launch Pages, you will be presented with a file picker (not the actual Finder). The left sidebar will be a folder of Documents, you must select. At this point, you can simply stop Pages. He will remember to open in the last selected folder and on the content of the Document folder, you will see a file chooser. As long you open, edit, save, or export documents in the Documents folder, it will remember this folder.

  If you change the location of the folder memory, whether it is in the file picker, or save or export to another location of the folder, and then the next launch of Pages will direct you to the last used folder location and not the location of the Documents folder.

  There is no user parameter which can be set to always override the behavior of Pages above.

• Change the default options for a NEW virtual machine in ESXI 5.1

  Hello

  I am looking for a solution change the 'default' options for a new virtual machine created in ESXI 5.1

  I want to have parameters such as 'cpu/memory HOT-add' default to enabled instead of disabled.

  There may be more options to change to a new virtual machine.

  All those who have an option to change the 'default' options for new virtual machines?

  THX

  You can change the/etc/vmware/config of vSphere host file and add the lines mem.hotadd = 'TRUE' and vcpu.hotadd = 'TRUE '.
  The settings then apply to any VM on this host when virtual machines are turned on...

  I just tried this on a 5.1 ESXi host and it seems to work perfectly...

  / Rubeck

• Default directory for the creation of new virtual machines

  Is it possible to change the default folder for new virtual machines in the data store? Then, instead of esxi always create virtual machines directory under / you can have create the folder in a subfolder.

  Must be removed. I just watched ghetto HA script a lamw to see if she could be easily adapted to do. I don't think it would take a lot. It would automate the task of the cancellation of registration, travel and re-entry.

• CP5 - time default view for text captions

  Hello

  I am using Captivate 5.0.1 and trying to figure out how to do something that has been in Captivate 4. In CP 4, I could change the preferences and set a time to default view for new text captions. By default, it is set at 3 seconds for all new text captions, but you can replace it. CP 5, that the default is set to 3, does anyone know how to change it?

  Thank you

  Mark

  Hello

  It is exactly in the same place as in Captivate 4: preferences, Global, default values. See screenshot. Or maybe I do not understand your question? If you're looking to apply to all, go to properties, but I did not understand that it was your question.

  

  Lilybiri

• How can I change the default zoom for the new tab only?

  The new tab in Firefox 33 zoom is too high to see all 12 of my thumb nail. I changed it using ctrl - but the next time I opened a new tab, the zoom is 100%. How can I change the default zoom for the new tab only?

  I posted a style rule to shrink the tiles, which allows several of them on the page, but naturally reduces their legibility. You can experiment with the dimensions to find a look that works for you.

  https://userstyles.org/styles/106326/shrink-new-tab-thumbnails

  I use the Stylish extension to experiment because of its preview function that allows me to see the effect quickly. You can install it from the site of modules, then after restart of Firefox while searching for his "S" icon in the toolbar to manage Styles so you can edit and experiment.

  https://addons.Mozilla.org/firefox/addon/stylish/

• How to change the default setting for Australian News & Sport?

  How to change the default setting for Australian News & Sport?

  What setting, probably your browser home page, and how you do that depends on what browser you ar using.

  If using IE opens this page, then click on the "gear" icon to the rt at the top of the page, select Internet Options and look in the general tab

• The default for new VMs

  Hi all

  In vmware workstation is anyway to set the default options for all new virtual machines? For example, when I create a new virtual machine, I always remove the floppy drive and go into the BIOS and the value numlock on.

  Is there to do on a global setting?

  Thank you for your time.

  NO.
  suggestion: create your own templates and store the file nvram with her - that stores this parameter, you mentioned

• Form - different default value for each new line needed

  Hi all
  
  I'm a newbie in the APEX and now I am struggling with a problem in the form of tables.
  
  On my page, I report master detail, where the detailed part is created in a table form (I used the Wizard).
  
  Now I want to implement the following:
  
  When I click on the button that adds the line of tabular form, I want to assign the default value for the column 'LOGNO' in my tabular form. Value for this column is table extraction and I this value already stored on the page to display one element 'P210_LOGNO_ACT '.
  
  When I click on the button for one second third etc.) times I would like to set the default for the column LOGNO as LOGNO = P210_LOGNO_ACT + 1.
  
  Y at - it something simple, or is - this difficult to attribute the different value to each new row of tabular form?
  
  Version of the apex 4.1.0.00.32
  
  Thanks in advance!
  
  Jiri

  Inspect your column and find out the name of your column attribute, it must be something like fxx (f01, f02, f03... etc) and use this column instead of f11 (in my case, the name attribute is f11)

  Create a JavaScript function in your page header

  function myaddRow() {
  //perform standard addrow
    addRow();
    //set default value here
  //make sure you replace the P5_X with your page item name
    $s('P5_X',parseInt($v('P5_X'))+1);
    $('input[name="f11"]')[$('input[name="f11"]').length-1].value=$v('P5_X');
  }
  

  Change your button to add a line and call the function above, as shown below

  javascript:myaddRow();
  

  See this example of work http://apex.oracle.com/pls/apex/f?p=46417:5

• Definition of "First view" options by default for new PDF files

  I usually want most of the PDFs I create to open the displayed pages Panel and "adjust to the window. Currently I open each PDF file and change it in the properties of the document under the "first view", save and close.

  There must be a better way.

  Is it possible to set the default type for all PDF documents that are newly created as part of the definition of job options?

  I searched in the components of different settings, but nothing helped.

  All advice appreciated.

  The initial view (IV) parameters are not part of the options when you create a new PDF, either in Acrobat or the Distiller.

  There are several options to apply IV depending on the version of Acrobat you are using. You can create an Action in Acrobat X that applies IV to any file open according to your needs and possibly save it as well. In Acrobat 9 or an earlier version, you can do a similar thing with a sequence of batch process.

  If you need to reach IV in the context of the creation while you can use a "epilogue.ps" script to add commands that Distiller will add to the PDF and link PS file to one of the presets of distillery distillers.

  Lori Kassuba has a blog post about this method.

• How to make a default encoding

  I would like to make default encoding of unicode-8 character, but when I try to do as the value, it does not work. Remember all the other settings that I use and it's the only one who doesn't.

  I don't have this problem often, but it's often enough to want to change permanently. Any help would be appreciated.

  I can't set the coding or the other, if I remove ISO-8859-1, it is automatically added. But thanks to advice on cor - el
  See also tools > Page Info > general

  When the html code for a page includes < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
  I see the text in UTF8. So I can see my Greek characters.

  ozman812, that's what we need to help to perhaps? I'm experimenting myself a bit with html these days.