Default insertion for missing items using DBMS_XMLSave.insertXML

Similar Questions

• BlackBerry Bold 9000, Sync smartphone for missing mac using Sync

  just upgraded to a 8800 with a 9000 and I see no end of questions

  I try to sync my 9000 to my macbook using the missing sync, the 8800 t - it no problem just plug-and-play.

  When I try to do with the 9000 the lack of synchronization screen, the battery symbol indicates the load for about 2 seconds and then it comes down to just showing the battery symbol that the phone is not connected to the load.

  When I try to sync the phone missing sync returns an error indicating that the phone is not connected, in the finder, the phone does not appear as a drive.

  So far, I did a soft reset on the 9000, out the battery and restarted.

  I have reset and restarted the Mac.

  I checked to see that I have the latest version of the missing sync software

  everything seems to be in order, but can anyone come up with any other suggestions, I slowly come to the conclusion that the phone is down

  Please see the other thread we have going on this.

  Missing Sync does not work with the "BOLD", even though they say that they "support"... all they do is opening tickets error for all the world and indicating that they cannot understand it. At most, you might be able to get your calendars and tasks synchronization and notes if you only use MarkSpace notes. Nothing doesn't sync properly to the Entourage from, so only use your applications native mac. Contacts are damaged. Sync once and never sync them again - will erase your office contacts.

  If you are using a Macbook (late 2008), Macbook Pro or macbook Air, there is NO support synchronization at this time for Missing Sync and the BB "BOLD". Lack of precise timing are aware of this, they have no estimates for an update.

  If you get no link at all - try to open Missing Sync first, then connect. Try a different USB port. Try to uninstall your old version of MS, and reinstall a new copy after a restart of your computer.

  See the other thread for suggestions and advice. People are displayed the same questions without reading the other, and now we have 3 of them. There is one that is two pages with ideas and experiences of others.

• How can I get mozilla be my default service for sending items when using the internet?

  Currently send an internet article I outlook that emphasizes not the article so that the person who receives the article only has copy and paste. I want to use Mozilla to send internet articles.

  There's an add-on free called PasteHyperlink 1.5.2 you can use. Find it here: https://addons.mozilla.org/en-us/thunderbird/addon/pastehyperlink/?src=cb-dl-recentlyadded

  Once you have installed the add-on, you right-click the URL of the article that you want to send, that highlights the URL. In Thunderbird, you click on "Write" write a new email. You'll see two new options appeared: 'Remove link' and "Paste Hyperlink." Click on 'Paste the hyperlink'. The URL is selected will then appear in your email. When your email is received, the recipient simply clicks on the hyperlink to the linked page. It works very well!

• How change the default resolution for windows to use when the monitor is not connected

  Hi, how can I set the resolution by default that windows uses when the monitor is turned off or not connected at all? My problem is that normally I use 1920 x 1080, but when I put the pc to sleep or just turn monitor and leave it like that for a while with a few app maximized, when I get back and turn the monitor on the resolution is correct but the enlarged window is resized to 1024 x 786 resolution. I tried to change in the registry DefaultSettings.XResolution a DefaultSettings.YResolution in all instances and it worked fine for a long time. Then some update that happened and now it no longer works. I reinstalled the system, but it still does not. How can I force windows to use always the 1920 x 1080?

  It seems that TMM disabling did the trick. Maximized windows are not yet moved to the left edge of the screen, well, those who have been maximized is maximized correctly as they should. I had to disable TMM through registry as I had no MMR in Task Scheduler.

  If anoyone is interested I've followed the instructions described here:

  http://superuser.com/questions/120983/how-to-disable-monitor-auto-detection-in-Windows-7

• Win7 always tries to connect by using the default profile for the Native WIFI

  Win7 always tries to connect by using the default profile for the Native WIFI
  I defined a new WIFI profile for my home WIFI network. I use a USB of NETGEAR WNA1100 adapter. The profile is configured to connect automatically. I also moved over the default profile for the Native WIFI. Win7 always tries to connect to the default Native WIFI profile and not the profile that I created. Also, when I restart Win7, the default profile for the native WIFI moves to the top of the Profiles list. Also, when I try to change the default Native WIFI profile to use security WPA2 - PSK (AES) instead of WEP, it allows me to make changes, but he comes back to WEP after it treats changes and attempts to connect to the network. How can I fix so that Win7 will use my profile to connect to my home WIFI network and not the Native WIFI as the default profile. Win7 still connect using the default profile of NativeWIFI despite installing a different profile in Control Panel 'Wireless Networks '. I know that I can edit this profile by default, but anyone know how tell Win7 to use a different profile than the default? I tried to change the positions of the profile so that I want to use is facing up, but no, still uses the default. If I try to remove it, it comes back.
  After removing the two profiles and adding the profile for my home network, Win7 automatically added the default profile for the return NativeWIFI. My profile is configured to automatically connect to the network using WPA2 - PSK (AES) security and the default profile for the NativeWIFI (use WEP security) is the Win7 Setup to manually connect. Also, Win7 puts the default profile for the NativeWIFI above my profile. Also, when I delete the profile by default the NativeWIFI, Win7 it always puts back and he goes over my profile. This is starting to resemble the Win7 manage wireless mechanism for allowing users to add and prioritize the profiles of school boards does not work. Here's another thing that happens: when I try to change the security for the profile default of NativeWIFI to WPA2 - PSK (AES) of WEP, Win7 allows me to make changes, but it is up to the WEP after it processes the changes and tries to connect to the network. This seems too much for me, it's a problem with Win7. If I could do this job, so I need not to set up a second profile.
  The adapter I use a NETGEAR WNA1100 works correctly and I use it without any problem. I have is with Win7 and the interface to 'manage wireless networks '. It will not honor the fact that the WIFI profile that I created for my home network must be connected to automatically I installed. He always wants to connect to the default profile NativeWIFI even if I set up my home network profile to connect automatically. I can do a manual connection for my home network without problem. It seems to me that it is a question of Win7.
  Kind regards
  QRP

  Thank you very much - Netgear seems to have finally accepted as the default network!  If all goes well it will stay like this

  MAS

• Type/conditional default value for a form element

  Hello
  
  I have an interactive report with a form on the table 'A' who 'Who' has columns like 'CREATED_BY', 'LAST_UPDATED_BY '. Now, I'm auto these columns in the form with the & APP_USER. function. The scenario occurs when the 'P' user clicks on the button 'CREATE' on the report, these columns of the report get populated info P. After committing this recording, the "Q" user edit this record even with the link 'Edit' in this folder. The two columns get populated by the Q news, ideally only LAST_UPDATED_BY should get populaed by the news of the Q and not the CREATED_BY column, as it is the 'P', which created this record.
  
  To do this, I guess that in the type of default value for these items, I have to use "Body of the PL/SQL function" instead of "static text with Session of Substitutions in State". Problem is to know how to code the filter: If the user pressed 'create' button or the button "Edit". Help, please
  
  Thank you
  Mary

  Hi Mary

  Usually, I would do this sort of thing on a trigger. However, you could do the conditional CREATED_BY field on the primary key of the record is null (which is itself a new record, but it must have a value of an existing record). The LAST_UPDATED_BY field should not be conditional, as it should be the name of the user who recorded the record.

  Andy

• Can someone tell me the default settings for the internal speakers (Realtek HD Audio Manager) on HP G62 454TU laptop pls?

  I had problems with IE11 and Outlook, both kept gel (not answer) more and more each day.  Outlook is still difficult sign in, I have to sign at least two times and once I got to sign on 7 times.  The drafting of emails, I'd get msg "cannot connect to Outlook - try again later. IE11 is also unstable permanently "unresponsive" my sound stopped working also and I found that he lacked Realtek HD Audio Manager.  It took nearly a week trying to figure out how to reinstall.  (I am 60 years old and not informed techno) Finally, I downloaded and installed (with no help from HP) but speakers still does not.  I approached then Microsoft Help Desk who suggested that reset IE11.  I did it yesterday and now all seems ok with IE11 and Outlook but I have still no sound.   Where to find the default settings for programs that use audio ie itunes, youtube, etc?

  I have only a couple of theories left to isolate the problem, but have no idea how to go on this issue.

  1. I received a msg when I lit the notebook from HP saying storage battery was low and the battery can be replaced.  I've never used this notebook on sector so I ignored msg but with freezes and random low cut that I removed the battery which seems to solve that problem, but I wonder if firm random downs could have damaged files, software or anything.

  2. Windows updates put things here that seem to be more for Windows 8 for example. Touch screen program.   Can we update caused problems for the sound on my laptop?

  I have run virus/malware programs with no threat found.  I also installed Glary to find and fix registry problems, but still no sound.

  Can someone help me please?

  Hello

  I'm sorry for the delay in response and for the inconvenience this problem did you. According to the description of the problem, you can't access your account and receive the error message "unable to connect to Outlook - try again later.

  I suggest you check the service state on https://status.live.com

  Note: you must identify yourself on the site to find out the exact state of the server, your account may be placed on

  I also suggest you to optimize your browser and check if it helps.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Setting by exporting the default value for Max in Quality program

  Hi Zac,

  I'm trying to find a way to define a default value for the 'Maximum use rendered quality' box located on the dialog window export settings. Is it possible to programmatically set a value for this box (maybe in the call to exSDKGenerateDefaultParams)? Or would a value 'default' for this box be treated by creating a "Preset"?

  Thank you
  Josh

  It is the exporter to use the setting provided by the host in exDoExportRec.maximumRenderQuality.  The exporter must define SequenceRender_ParamsRec.inRenderQuality and inDeinterlaceQuality to kPrRenderQuality_Max, if the value.

  Zac

• You can use "NERO 8" to change the default settings for playing music and viewing photos?

  Original title: ideas: insert an error code or give a brief description of what you're trying change default setings in automaticlly reading page and use "NERO 8" for some of devaises accomplish or difficult. ?? __

  automaticlly/game change default setings for CD, DvD, s, play music, photos of nathalie, instal, softvar, play games... I need to know where I can use "NERO 8 esentials" and I use NERO 8 for the whole of what is on the page "automaticlly play"?

  Hello music79,

  Thank you for visiting the Microsoft answers Site.

  You can check the link below for the information of the Nero 8 Windows 7 Compatibility Center:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/details.aspx?type=software&p=Nero%20Suite&v=Nero&UID=8&l=en&pf=0&PI=4&s=Nero%208&OS=32-bit

  In addition, to set a default program to use when you open a specific file type, please see the link below:

  Change the programs that Windows uses by default

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I try to insert key it says its the key by default and can not be used. Sticker on the bottom of my laptop is all cleared off the coast.

  I recently installed Linux, now I have installed Windows 7 Hp 36 bit now when I try to insert my key it says its the key by default and can not be used. To make it better. My sticker on the bottom of my laptop is all set off but I Got the serial number and product and model. What should I do?

  I did install the ISO wrong or my key has expired?

  You can't just use any key, the product key for your computer is unique. If the product key on the COA sticker at the bottom of your laptop is damaged, you will need to purchase a new product key for Windows 7 Edition Home Premium and use:

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

• field default hierarchy is missing for the PO and the form of document types SPOin req

  Hi gurus,
  
  Please help me find the error in the implementation of the approval req.
  field default hierarchy is missing IN Req and standard purchase in the form of document type order.
  I checked the box 'use the hierarchy' on the human resources in the financial options tab.
  what I need to do any other configurations...

  Hello

  Please uncheck the 'Use approval hierarchy' flag and save the changes.
  Again, check the indicator of "Use trust hierarchy" and save the changes.

  Run the following query to check the value of the flag of the 'trust use hierarchy"for the problematic control unit.

  Please provide the id of operating as the query entry unit.
  Select USE_POSITIONS_FLAG from financials_system_params_all where org_id = '& org_id;

  It must return a value 'Y '.

  Now, log out of the application and log in again & check types of documents.

  Thank you
  Seddik

• Shares of CS5 how to insert 'save for web' item of menu with break

  Hello

  I did a simple crop, resize, sharpen action today, but when I added the registration for the web stage that I couldn't work out how to get a break to allow the user to manually insert a file name change prior to registration does not happen. On the contrary, upon registration of the action, it seems I can only insert the item of menu Save for web with step registration enabled. To then change the name of the file, I need to go to the directory and rename the file manually.

  I wish that my action to make a break in the save for web window and devices so that I can make the change file name, tweaking the compression settings and sometimes change the type of file (for example the png or gif rather than jpg)... and then save.

  Probably very simple to make...

  When you save your action, instead of

  Insert the menu item to save for web,

  Use save for web and save a picture.

  Then in the Panel actions, turn on the toggle dialog box.

  Now, when the action is played, recording the web dialog box will open

  and you can change the settings.

  

  MTSTUNER

• How to use my default format for my signature settings also

  Hi all

  Please explain how can I use my settings to default format for my signature, too.

  For Ex:

  I use times police with 12'. I want to use the same settings of my signature so police.

  Kind regards
  Siva.

  You can include html code in the Signature text formatting. An option is to learn the desired code and enter it by hand.

  However, I would suggest you start a new message and compose your signature as if you were writing an e-mail message, but save it as an HTML file. In the account settings, you can refer to this file to provide your signature.

  If you need multiple signatures, I suggest that you look at the Signature Switch addon that allows you to select a signature file when sending.

  A useful feature of Signature Switch is that it allows you to include variants of html text and the pain of your signature. In general, there is also rude to answer a message composed in plain text with a response using HTML. Your correspondent has indicated implicitly that he prefers plain text.

  GIYF: https://support.mozilla.org/en-US/kb/signatures

• In XP, what are the default fonts and font sizes by default under advanced appearance for these items listed below?

  What are the fonts by default and default font for these options size? I've changed them - problems. Also why can't you post a record of original fonts for users of xp with all the fonts required default? It helps users strongly tempted to extract did not work properly.
  Need default font and size for each Option below
  3D objects
  Desktop
  Caption button
  Title bar active for example. (Arial - 8) or NA if nothing
  Resident of the active window
  Context of the application
  Title bar inactive
  Inactive window boarder
  Icon
  Title bar inactive
  Menu
  Message box
  Palette title
  Scroll bar
  Selected items
  ToolTip
  Windows
  Icon spacing:
  Icon spacing V
  Thank you

  Hi Scott,.

  If you change the settings in display properties, you can change it to default by selecting the Windows XP default theme. This will change all default Windows fonts and their sizes.

  To do this, follow these steps.

  a. right click on an empty space on the desktop and then click Properties.

  b. on the themes tab, click Windows XP in the theme box.

  c. click OK.

• Default password for LDAP sync accounts that do not use LDAP authentication

  We use CUCM 10.5.1.  We have enabled LDAP and installation directories.  I can see the previous local users and new users sync ldap.  I know that if there was a previous local user with the same user as the new ldap user ID, this account is converted into an ldap account and I guess the password stay the same before ldap integration.   But what of the new ldap sync protocol accounts?  I see that there is a field of password for them, but what is the default password for these newly created accounts and where I can edit this default password?

  I do not have a 10.x here, but on previous versions, "credentials political default" sets the default password.

  It was under the management/diploma default user policy. Choose the 'end user' political 'password' and put the default value you want here. It may be in a slightly different place from 10.x

  Aaron