Default Sound Device will not be selected

Similar Questions

• Portege R500 - error message "sound device is not supported" THotkey

  Hello

  Whenever I have start up my Portege R500 I get THotkey message error "sound device is not supported. \
  The same error message repeats when I touch the volume icon. There is also no sound.

  Any idea what causes this? I have tried to uninstall and reinstall the driver most that can affect the shortcut key and the sound.

  Thank you

  Nico

  Is it Vista or XP?

  Have you installed Windows yourself or it was preinstalled?

  Maybe the wrong driver was installed (of another model for example).

• BlackBerry Smartphones after upgrade attempt for 8310, device will not - restart only flashing red

  Problem: I tried to upgrade the software of the device to 4.5 and now THE DEVICE WILL NOT RESTART at ALL. Not with a hard reset. Not using the SIM card and the battery of my 8310 and put in his. Nothing. Just a red light that flashes in a model: two quick flashes then pause; two quick flashes then a pause, etc.

  Reminder: This 8310 got to. 4.2.2 software device and something like 2.6 on the desktop. I have downloaded/upgraded to 4.6 for the office and 4.5 for the device since the AT & T site. The Director of office prompted me to install the new software for device... good. After a few minutes, I get an "unknown error" message and it stopped the installation. Following a support article, I uninstalled reinstalled two updates, but then the problem occurred: NOTHING happens on the screen of the device at all, just the red light flashing when the unit is plugged.

  The AT & T store told me that it's the tenth 'dead' curve he is seen in about a week, apparently all occurring when people tried upgrading the software. All the thoughts/help to offer?

  Help, please!

  Check this instruction:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

• Apple devices will not print not to 6700 Officejet, including the MacBook Pro and iPad

  I'm helping someone to implement their MacBook Pro and iPad to print wirelessly on their Officejet 6700. I have recently set them up with a new Apple Airport Extreme for their router. The printer connects to the wireless network. During the installation process of the printer is fine, that the MacBook can easily see the printer. The appropriate driver is installed. They also have a laptop Windows 7, which prints instanteously and has no problem whatsoever.

  When I try to print from the Mac, nothing prints. I open the print queue and it says 'Printing - a printer' and nothing ever comes of it. When you try to print from the iPad, you can see the printer and I select. However, after saying in print, said only dialog box: 'Connection to the printer' and he never - it just times out.

  Things I've tried:

  • Everything in this article which corresponds to Macs (10.8).
  • Reset the printing on Mac system.
  • Reset the printer to default settings.
  • The definition of the static IP address of the printer through the printer settings.
  • Setting the IP address of the printer via the Airport utility (after changing the automatic printer).
  • Restart the Mac after each attempt to remove the printer and adding again.
  • Using the official HP Officejet 6700 driver.
  • Use the Airprint driver.

  Other info:

  • Successfully, I can ping IP address of the printer from the MacBook Pro.
  • I can easily see the web page of configuration of the printer in the printer settings both by entering the IP address.
  • The printer is only about a month.
  • They bought this printer because the earlier had problems printing from all of their wireless devices. It is with a previous router in their ISP.

  At this point, I'm completely puzzled as to why the printer will print not these Apple devices. We have addressed all the issues that might be causing it: the network, the printer and the MacBook itself. I looked online and can't see any problem with people not being able to print to a wireless printer connected to an Airport Extreme. I saw some problems when the printer is connected via USB to an Airport Extreme, but this isn't our installation program.

  Any help would be greatly appreciated!

  Wow, I must admit, I had to do a lot of research to find something that you have not already tried! Thanks for your efforts so far @derick03 I accept the challenge of helping you get this to work.

  I have a vague feeling that the problem may have something to do with the router settings and to test my theory, I would like to try something for me.

  Please, open the preferences system, printing and scanning, click on the + symbol to add a printer, but this time, instead of the default tab, click the IP tab. Now let's add the printer using HP Jet Direct Protocol instead of the standard Hello.

  

  You can enter the IP address here, choose the HP Jet Direct and then select the printer driver, and then try to print. You will not be able to analyze this way, I just do this for diagnostic purposes. If you can print, it confirms the Hello Protocol is, and you will need to call Apple to make them turn on Hello, multicast and ensure that all the necessary ports are open.

  Not all wireless routers take load Hi or all features of Hello. Hello being the default method for the discovery of printers on a network, you must ensure that your wireless router supports Hello.

• Bluetooth devices will not connect after a long period of absence

  It started in the last 3 months, I'm not sure of that OS upgrade specifically.  I currently have Version 10.11.3.  I have a MBP late 2011.  I use a keyboard, trackpad and bluetooth magic, bought the same time as my mac.

  Whenever I come back from a business trip (usually a day or two max), my bluetooth keyboard and trackpad will not connect.  They appear in the drop down bluetooth devices, but when I select Connect, nothing happens.  I did everything the new standard batteries, SMC/PRAM reset, nothing helps.  I then manually have to pair them up with difficulty using Set Up Bluetooth Trackpad/keyboard.  It will show "found", then say could not pair.  I have the power on the devices several times his cycle, and then hold the power button 'on' to the pair.  Usually, it takes 5-10 minutes and is terribly frustrating.  Once I get the paired, as long as my stays Mac in the same room with the devices, they pair very well.  Appreciate the advice.

  99 + % of the time, there is a previous event - you indicate that this has been the case for «...» 3 months... »

  What event would it? Upgrade to El Cap? Nothing at all you can think of that has occurred "3 months ago"

• error code 19; TSSTcorp CD/DVGW TS-H652M ATA Device will not load at startup upward due to incomplete or registry problem? What can I do from here now, Windows VISTA-32 bit; gives this code problem also 00000013, thanks for your time.

  error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load.  E is my player device on the windows vista operating system to 32-bit.  I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Surround Sound Device do not appear in Windows

  Hello

  I have my PC running via HDMI to a Denon AV amp, out for my LG Plasma and through the eye of the TV to my 5.1 system stereo. The problem is that Windows sees only the TV speakers, so I can't set up the skin in Windows. I can't use the PC output optical directly into the stereo, because she is disabled with HDMI output. Is it possible to select optical for audio in Windows when you use HDMI for video.

  I was hoping that the AV amp would be a solution, but it detects that it is connected directly on, so when I hit the "Speaker" button, it proudly displays 'TV - Stereo' and also will not output sound other than through the HDMI - in this case.

  I can't just plug the stereo speakers to the amp AV or because they have taken non-standard and the rear speakers are wireless.

  If anyone has any suggestions, they would be greatly appreciated

  See you soon.

  Hi André,.

  Sorry for the late reply.

  I suggest you follow the advice given by Nathan Pachmayr July 20, 2013 from the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-Media-Player-and-51-surround-sound/1ddd1018-39cc-4608-aa83-b935af226741

  You can also consult the advice given by Afzal Taher April 21, 2010 from the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-7-surround-sound-problem-51-surround-sound/74a2327f-8b71-4C6C-b359-50174c646be9

  Hope this information helps, get back to us if you need further assistance.

• Created Audition the sound file will not be read.

  I created an audio file of the hearing and saved. When I come back later and open the file, it will not play. I can listen to the file in the Finder and I can import it into iTunes and listen to it. I can change the hearing file and save the change, but he will not play again. Any ideas?

  At first glance, it seems that hearing is disconnected from your audio device. Go in Edition > Preferences > hardware Audio and make sure she assigned correctly. The other thing you should know is that other applications can 'capture' your audio device and refuse access to hearing, even if it is correctly assigned - you must stop anything that could do this (including the sounds of Windows in the operating system itself) before it will play.

• My IOS devices will not synchronize wifi with my MacBook air

  My devices will be simply not sync over wifi with my Macbook air. The message that appears on iPad, iPhone etc. is that they will be synchronized if the Mac is connected. I tried, but it did not work.

  "My devices will be simply not sync over wifi with my Macbook air."

  Via Wi - Fi requires the use of iCloud to synchronize data between your devices iOS a your Mac.

  http://www.Apple.com/icloud/Setup/

• Device will not be displayed in iTunes!

  My iPad 2, iOS 9.2, will not be displayed in iTunes. I looked for answers online, and I can't find anything. My device is allowed in the iTunes account and my iPad 2 is allowed on computers. I checked the USB ports, etc and I can't find anything! I hope someone can help me!

  If iTunes does not recognize your iPhone and iPad, or iPod - https://support.apple.com/HT204095 - https://discussions.apple.com/message/29983567#29983567

• My Safari tabs opened by other devices will not update

  I have tabs open other IOS and devices Mac OS and they will not regenerate on my Mac. Is it possible to update manually? No idea why it cannot be auto refreshing/getting updated?

  Thank you.

  Try the settings/iCloud and remove the synchronization. Wait a few minutes and then resynchronize.

  Try to go into System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing.

  Have you tried the signature to iCloud and then reconnect?

• Satellite P200-1JV of music rises like a sound card will not play

  I have a toshiba Satellite P200-1JV and I'm on spotify (music player)
  Music is coming as a flaw of the sound card and will not play. Little play and it's a little bit distorted.

  Are there updates/drivers sound card I should be downloading?

  Sorry to be thick. And thanks for any answers

  Stretchmo

  Hello!

  To be honest, it looks like bad equalizer settings, so try to reset as Akuma said.
  And by the way, do you have the same problem with external speakers?

  In your case, I will try to update the audio drivers. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I hope it works for you!

  Good bye

• Y570 Sound device does not

  Hi people,

  No sound in my Y570. When I play music from windows media, he said that Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it may not work properly. Although I can always cut, disable, and change the volume I have always not able to receive all the sounds. I already check the installed drivers are up to date and they are working properly. There are 3 of them on the tab (audio, video controller and game) cyberlink virtual webcam driver, intel (r) display audio and high definition realtek finally audio.

  Please help me... I have a presentation power point on the way...

  You can download and install the drivers from the link below?
  http://consumersupport.Lenovo.com/UK/en/DriversDownloads/drivers_list.aspx?CategoryID=867235

• Sansa Fuze - device will not start error 10

  I know that it's all over the forums and believe me, after trying the support of Sandisk I scoured the entire internet and put into service each available remedy.

  Here's the deal. I have a brand new Sansa Fuze 4 GB. After taking its packaging, I plug it on my desktop (Windows XP, SP2) and I get the message "USB device not recognized". I tried every single USB port, including a self-powered USB hub.

  I am the administrator on this computer and I added myself as a "Net localgroup Administrators local service' - whatever the hell that means.

  I have installed and reinstalled WMP 11 and the MTP Porting kit. I tried all of the fixes in MSC mode. I tried all the fixes on three separate, all computers running the same operating system - one is a laptop.

  I contacted the helpdesk of SanDisk and their corrections were more extensive that I found on the internet, the results have not changed.

  So, if someone can help me. I don't understand why this unit is so full of bugs. I don't understand why it will not work right out of the box as announced. It's actually a Christmas gift for a friend, so the clock is ticking. I wanted to have this thing set up before unleashing it on it. I'm sure that some bugs he get up and running should be echoed on his computer!

  Brand new? Bring her back. You probably have a lemon. Or have SanDisk replace it. \

  Edit: You could also have a bad power cord. But this the heck, replace all the way.

• peripheral mass storage USB "unplug safely device" will not be released

  I plugged my camera memory chip and it does not load so I check the Device Manager and says USB Mass Storage Device "probably delete material" and I had not removed the chip... I had already deleted... that it will not come out... I tried to reboot so far with no results and tried to put the chip in and out to try to put in place the "surely remove device" to come and he did once but that didn't help... I will try to shut down the system and see if it works... has someone else had the same problem?

  Hi Jamievee,

  1. don't you make changes to the computer before the show?

  Follow the steps in the link given below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  If the steps above did not help, then you can try to format the chip on another computer and then check if the chip is detected.

  See the link provided below in order to format the drive.

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

  Note: Formatting erases all existing files on a hard drive. If you format a hard drive with files it contains, the files will be deleted.