peripheral mass storage USB "unplug safely device" will not be released

Similar Questions

• Peripheral mass storage USB is recognized as DVD player while the original disc is missing

  Hello

  I use windows vista Home premium (32 bit) on my HP pavilllion laptop. After getting updated for service pack 2 for vista my dvd player was absent. I was using Microsoft fixit to solve the problem and the use of the internet by wireless USB reliance data card and my laptop has recognized this usb mass storage device, dvd player and I have uninstalled this usb device several times as I tried to restore to their original factory condition, but my problem has not been resolved. Help, please

  Hi ss_gour,

  Please see an additional post that resembles your problem with a possible fix:

  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/d416cfcd-366B-4B50-B976-29b5edc169c1/

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• USB 2.0 devices are not recognized on Satellite L

  Hello

  All of the usb 2.0 device is not recognized on my laptop.
  I got a message stating that the driver are not installed. I'm looking for the driver on the support site, but could not find them...
  I've updated the bios and chip set utility, but still nothing.

  Any idea?

  Hello

  What model of laptop do you have?
  What operating system do you use?
  Since when you noticed this problem?
  Did you test all USB ports?

  Have you tested with different devices USB ports?

  Please post a little more information.

• Hung up on the bad test page port (LPT1) and tail blocks to HP C4200 w/USB connect... will not erase

  Hanging test page to the wrong port (LPT1) and tail blocks to HP C4200 w/USB connect... don't delete.__How cancel?  Pls help.  TKS Ron Moore
  

  Ideas page: hanging in wrongly Test prt (LPT1) and tail blocks to HP C4280 w/USB connect... will not erase.

  How to cancel?  Pls help.   TKS, Ron Moore

  Hi Ron,

  1. how many printers is connected to the computer?

  2. did you of recent changes on the computer?

  3. what happens when you try to change printer (LPT1) port

  Method 1

  See the link below and run them the fixit tool available, check if it helps.

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us?EntryPoint=lightbox

  Method 2

  If the previous step fails, then I suggest that you restart the computer the print spooler service and check if it works.

  A print spooler is a system service that temporarily stores the disk printing hard or in memory until the printer is ready to print.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) right click on the print spooler service, and then click Properties.

  (d) under the tab general , next to Startup type, make sure thatAutomatic is selected.

  (e) if the service is not already running, under Service status, click pie Sand then clickOK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• BlackBerry Smartphones after upgrade attempt for 8310, device will not - restart only flashing red

  Problem: I tried to upgrade the software of the device to 4.5 and now THE DEVICE WILL NOT RESTART at ALL. Not with a hard reset. Not using the SIM card and the battery of my 8310 and put in his. Nothing. Just a red light that flashes in a model: two quick flashes then pause; two quick flashes then a pause, etc.

  Reminder: This 8310 got to. 4.2.2 software device and something like 2.6 on the desktop. I have downloaded/upgraded to 4.6 for the office and 4.5 for the device since the AT & T site. The Director of office prompted me to install the new software for device... good. After a few minutes, I get an "unknown error" message and it stopped the installation. Following a support article, I uninstalled reinstalled two updates, but then the problem occurred: NOTHING happens on the screen of the device at all, just the red light flashing when the unit is plugged.

  The AT & T store told me that it's the tenth 'dead' curve he is seen in about a week, apparently all occurring when people tried upgrading the software. All the thoughts/help to offer?

  Help, please!

  Check this instruction:

  http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

• My Celler mass storage device will not work on Windows 7

  I have a storage device mass of Celler that has always worked with several computers, now on Windows7 home premium 64-bit, that it says it can't find the drivers. I had Windows search for drivers, but the attempt failed. All solutions? It's most basic 2.0 mass storage device.

  Contact the manufacturer of the device on the drivers for it.

  The manufacturer has written drivers for their products, not Microsoft.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 Hardware/Software Compatibility Center.

  http://www.SevenForums.com/tutorials/316-compatibility-mode.html

  How to run a program in Compatibility Mode in Windows 7 is at the link above.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forums.

  There is a list of the Windows 7 Forums at the link above to help you.

  You get the help you need there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry Smartphones there is no option on my Blackberry mass storage / USB to aid to export photos to computer.

  I'm trying to transfer photos from my Blackberry. I don't have a data plan or a micro sd card, so the usb mass storage option is (I think) the only way for me to get my pictures on my computer and my phone.

  I plug the usb cord into my computer and the phone, but my computer does not recognize the phone as a storage device, so when I click on "removable disk (E)" in my computer, I am asked to insert a disk in the drive.

  I read that, so that it works, I need to turn on my Blackberry mass storage. I go to options and storage device; However, there is no option "Mass Storage" even that are listed. Only two options with checkboxes are 'Enable Compression' and 'Media Card Support.'

  Is the storage option of mass elsewhere on the Blackberry Curve? I tried to restart my phone, computer, using different usb ports, and using usb different cords nothing helps. How can I get my pictures on my phone?

  Hello

  You can still use BlackBerry Desktop Software for it!

  If your media or Images are stored on the memory of our device then first install BlackBerry desktop Software here BlackBerry desktop software after installation connect your device using the USB cable and run the Desktop software.

  Select images from software then you can import the Images on your PC.

  Good luck.

• PlayBook of Smartphones blackBerry Desktop Software does not recognize. not recognized as peripheral mass storage

  Work Machine - Windows XP question: I installed, removed, close and re-installed the latest version of the Software Desktop 6.0.2 B45, but failed to get the Office to recognize my Playbook.  As the system does not recognize the computer as a mass storage device either

  Home Machine Windows XP problem: I did as above and now not only the softare does not recognize the Playbook but it charges 6.0.2 B45 whenever it is connected.  The computer recognizes the Playbook as a mass Storage device, but 570 MB 100% full (it is a machine of 64 G)

  Ideas for one or both?

  Sorry, I was in the wrong community section

• Device will not be displayed in iTunes!

  My iPad 2, iOS 9.2, will not be displayed in iTunes. I looked for answers online, and I can't find anything. My device is allowed in the iTunes account and my iPad 2 is allowed on computers. I checked the USB ports, etc and I can't find anything! I hope someone can help me!

  If iTunes does not recognize your iPhone and iPad, or iPod - https://support.apple.com/HT204095 - https://discussions.apple.com/message/29983567#29983567

• Sansa Fuze - device will not start error 10

  I know that it's all over the forums and believe me, after trying the support of Sandisk I scoured the entire internet and put into service each available remedy.

  Here's the deal. I have a brand new Sansa Fuze 4 GB. After taking its packaging, I plug it on my desktop (Windows XP, SP2) and I get the message "USB device not recognized". I tried every single USB port, including a self-powered USB hub.

  I am the administrator on this computer and I added myself as a "Net localgroup Administrators local service' - whatever the hell that means.

  I have installed and reinstalled WMP 11 and the MTP Porting kit. I tried all of the fixes in MSC mode. I tried all the fixes on three separate, all computers running the same operating system - one is a laptop.

  I contacted the helpdesk of SanDisk and their corrections were more extensive that I found on the internet, the results have not changed.

  So, if someone can help me. I don't understand why this unit is so full of bugs. I don't understand why it will not work right out of the box as announced. It's actually a Christmas gift for a friend, so the clock is ticking. I wanted to have this thing set up before unleashing it on it. I'm sure that some bugs he get up and running should be echoed on his computer!

  Brand new? Bring her back. You probably have a lemon. Or have SanDisk replace it. \

  Edit: You could also have a bad power cord. But this the heck, replace all the way.

• Apple devices will not print not to 6700 Officejet, including the MacBook Pro and iPad

  I'm helping someone to implement their MacBook Pro and iPad to print wirelessly on their Officejet 6700. I have recently set them up with a new Apple Airport Extreme for their router. The printer connects to the wireless network. During the installation process of the printer is fine, that the MacBook can easily see the printer. The appropriate driver is installed. They also have a laptop Windows 7, which prints instanteously and has no problem whatsoever.

  When I try to print from the Mac, nothing prints. I open the print queue and it says 'Printing - a printer' and nothing ever comes of it. When you try to print from the iPad, you can see the printer and I select. However, after saying in print, said only dialog box: 'Connection to the printer' and he never - it just times out.

  Things I've tried:

  • Everything in this article which corresponds to Macs (10.8).
  • Reset the printing on Mac system.
  • Reset the printer to default settings.
  • The definition of the static IP address of the printer through the printer settings.
  • Setting the IP address of the printer via the Airport utility (after changing the automatic printer).
  • Restart the Mac after each attempt to remove the printer and adding again.
  • Using the official HP Officejet 6700 driver.
  • Use the Airprint driver.

  Other info:

  • Successfully, I can ping IP address of the printer from the MacBook Pro.
  • I can easily see the web page of configuration of the printer in the printer settings both by entering the IP address.
  • The printer is only about a month.
  • They bought this printer because the earlier had problems printing from all of their wireless devices. It is with a previous router in their ISP.

  At this point, I'm completely puzzled as to why the printer will print not these Apple devices. We have addressed all the issues that might be causing it: the network, the printer and the MacBook itself. I looked online and can't see any problem with people not being able to print to a wireless printer connected to an Airport Extreme. I saw some problems when the printer is connected via USB to an Airport Extreme, but this isn't our installation program.

  Any help would be greatly appreciated!

  Wow, I must admit, I had to do a lot of research to find something that you have not already tried! Thanks for your efforts so far @derick03 I accept the challenge of helping you get this to work.

  I have a vague feeling that the problem may have something to do with the router settings and to test my theory, I would like to try something for me.

  Please, open the preferences system, printing and scanning, click on the + symbol to add a printer, but this time, instead of the default tab, click the IP tab. Now let's add the printer using HP Jet Direct Protocol instead of the standard Hello.

  

  You can enter the IP address here, choose the HP Jet Direct and then select the printer driver, and then try to print. You will not be able to analyze this way, I just do this for diagnostic purposes. If you can print, it confirms the Hello Protocol is, and you will need to call Apple to make them turn on Hello, multicast and ensure that all the necessary ports are open.

  Not all wireless routers take load Hi or all features of Hello. Hello being the default method for the discovery of printers on a network, you must ensure that your wireless router supports Hello.

• My IOS devices will not synchronize wifi with my MacBook air

  My devices will be simply not sync over wifi with my Macbook air. The message that appears on iPad, iPhone etc. is that they will be synchronized if the Mac is connected. I tried, but it did not work.

  "My devices will be simply not sync over wifi with my Macbook air."

  Via Wi - Fi requires the use of iCloud to synchronize data between your devices iOS a your Mac.

  http://www.Apple.com/icloud/Setup/

• My Safari tabs opened by other devices will not update

  I have tabs open other IOS and devices Mac OS and they will not regenerate on my Mac. Is it possible to update manually? No idea why it cannot be auto refreshing/getting updated?

  Thank you.

  Try the settings/iCloud and remove the synchronization. Wait a few minutes and then resynchronize.

  Try to go into System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing.

  Have you tried the signature to iCloud and then reconnect?

• Bluetooth devices will not connect after a long period of absence

  It started in the last 3 months, I'm not sure of that OS upgrade specifically.  I currently have Version 10.11.3.  I have a MBP late 2011.  I use a keyboard, trackpad and bluetooth magic, bought the same time as my mac.

  Whenever I come back from a business trip (usually a day or two max), my bluetooth keyboard and trackpad will not connect.  They appear in the drop down bluetooth devices, but when I select Connect, nothing happens.  I did everything the new standard batteries, SMC/PRAM reset, nothing helps.  I then manually have to pair them up with difficulty using Set Up Bluetooth Trackpad/keyboard.  It will show "found", then say could not pair.  I have the power on the devices several times his cycle, and then hold the power button 'on' to the pair.  Usually, it takes 5-10 minutes and is terribly frustrating.  Once I get the paired, as long as my stays Mac in the same room with the devices, they pair very well.  Appreciate the advice.

  99 + % of the time, there is a previous event - you indicate that this has been the case for «...» 3 months... »

  What event would it? Upgrade to El Cap? Nothing at all you can think of that has occurred "3 months ago"

• error code 19; TSSTcorp CD/DVGW TS-H652M ATA Device will not load at startup upward due to incomplete or registry problem? What can I do from here now, Windows VISTA-32 bit; gives this code problem also 00000013, thanks for your time.

  error - coded 19; involved device is CD/DVGW - TSST Corp. CD/DVGW TS-H652M ATA DEVICE. does not load at startup, nor do I have an icon E:\drive on my related 'Computer', only C and D of backup disks, since it has failed to load.  E is my player device on the windows vista operating system to 32-bit.  I tried the driver down load and FIXIT online program, they say that my drivers are repairable, but the problem is in the registry and device instructions at the beginning upward. What should I do next!

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Normally the above will solve this problem otherwise working your way down through them, even if you did
  them before.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.