Definition of Boolean text with nodes proberty

Similar Questions

• How is scale 2 scales with node proberty?

  Hello world

  I have a problem with the xy-graphs with 2 different scales there.

  What is already done:
  I have a chart with a scale xy y on the left side and a scale are on the right site. I have also 2 locations inside, one is associated with the left and the other with the right y-scale.

  What is my problem:
  I want to set the range programmatically both sides. the left site needs a greater range than the right. but this does not work for me. I can set the range left or the right, but not both at the same time. I tried it with a knot proberty cause I use it already to associate the plots of the scales, but insert "y-minimum" and "maximum-y" to the node affects only a ladder there.

  I work with LV 8.6 (Base)

  any suggestions?
  Thanks in advance.

  Try this. Maybe this will solve your problem.

  You can select active scale and change its range. Change the active scale, then repeat the procedure.

• How to create a custom control for a button where the look apply to everyone else but not the Boolean text?

  Hi all

  I would like to create a button custom as a master, so that if I change the look of the master all other buttons are changed.

  I did it with a custom control, such as a 'type strict def' otherwise the look will change , BUT if I do this as a strict type def I can't change the Boolean text more which should be different on each button.

  How to create a master control of a button where the look apply to everyone else but not the Boolean text?

  Steve Chandler wrote:

  I don't think that you can do. I just looked and as I suspected the Boolean property text is read only for strict typedefs, you cannot use the nodes property to change the text.

  As a just solution make it a typedef. When you want to change the open look the typedef and strict rendering, make your changes, then make no strict again. You will need to update the text Boolean yet once for all instances. Kind of pain. This is perhaps something for the exchange of ideas.

  Alternatively, remove Boolean text and replace with legend

• How to read a stock of Boolean Boolean text?

  Hi all

  I had the help of the forum to read the label, Boolean or a legend given Boolean check or tick. But in my project I have to read Boolean text only. There are about 40 option and that I'll never choose, its Boolean text must be read.

  My project is on that I should read excel file all the names, and these names must text Boolean and who ever has is selected from the list with the name that the file should be saved. So why should I read Boolean text only. As at runtime, I can't change the Boolean label or legend so when reading excel I can edit Boolean text and read it.

  I enclose the my code to read from excel and give those names to check Boolean. Further, I need save the file with this name only.

  Thanks in advance

  Pals

  Does that help?  I'm not sure I understand your question.

• Boolean text disappeared after the creation of the exe

  Hello!!!

  Deploy an exe of a National Instruments touch panel touch panel. The exe contains a value Boolean LED indicator which is supposed to is set to display the Boolean text (multiple string function is also checked). However this function does not work it means that boolean works properly but no text is visible. If anyone can help with this?

  Thanks in advance

  Good morning thorfano,

  I happened to notice that none of your Boolean texts are on the indicator, while mine are.  If you move your boolean text on the indicator or simply right click the indicator and choose "Text" lock at the Center, you should be able to review your text.

  A variant of this bug has been reported to R &D; I am trying to add this specific case to our documentation.  I apologize for any inconvenience this issue may cause you and hope that the solution to moving your boolean text is acceptable.

• Siri in him sending text with the value 'NULL '.

  When I say, "Siri, text my wife, 'X', ' Siri responds correctly,"here is your message to Jill: 'X'. "" "  "Ready to send it?"  I say 'Yes' and sends the message.  As soon as I get a text from my carrier saying the recipient of the message was invalid.  100% of the time, I see that Siri has sent a text with the value NULL.

  I tried to restart my phone.  I tried to remove and re-add my contacts.  Anyone else having this problem?  Someone knows how to solve?

  If it's by the carrier, you should contact them and see what they receive in return for their side. Ive had Siri send messages for me and I have never seen this one IOS.

• I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TV says wrong user

  I have Apple TV gen 1. I changed my iTunes password and now I can't the Apple TV in the House. It will connect to iTunes. I type my Apple and a new password. My phone Gets a text with a verification code, but the Apple TVsaybadusername password or.

  Your ATV1 has an old software system not updated for years.  You have 2 factor (6 digits) or authorization of step 2 (4 digits) enabled for your Apple account.  Here are the characteristics of the latter.  I disable these on your Apple account and try again.

  For Apple ID - Apple Support two-factor authentication

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

• HP ENVY 7640: Jobs of text with images - printer cancels

  When I print a text with images document the printer stop printing and cancels the print job when it starts to print any image.

  Help

  Hey @sudiegal!

  Thanks for posting on the HP Forums!

  I would be happy to provide you with some suggestions that may fix the problem.  I see that the printer cancels jobs when you add a photo to you text document.  The first thing I suggest is to remove the printer by resetting the printing system.  After removing the printer add printer and then try printing the document again.

  To reset the printing system:

  1. click on the Apple in the top left of the computer icon

  2. click on System Preferences

  3. click on printers and Scanners

  4 press and hold 'Ctrl' on the keyboard and click with the mouse in the space below the printer

  5. click on reset the drop-down list printing system

  6. we may request for Mac ID and color wheel for a while until the printer is deleted

  

  To re-add the printer:

  1. click on the Apple in the top left of the computer icon

  2. click on System Preferences

  3. click on printers and Scanners

  4. click on the plus sign (+) icon in the list of printers

  5 Select your printer

  6. choose HP ENVY 7640 series in the drop-down list next to 'use' or 'print using '.

  7. click on add

  

  If please, after back and let me know if it works for you!

• Receive the text with peak & have to download it?

  Front of JB when we (by 2 with DRM) would receive a text with a pic we could tap or hold the pic view you or save a picture. On the DRM from my wife, she has only the possibility to download or delete with no overview of the attachment window. I looked in the settings of text and see nothing there. Mine still works as it did or similar to when I was on ICS. Any help would be grateful

  happy to help you. Be sure to choose the best answer if this solves the problem

• Selectively underline character to the Boolean text

  I am full of unusual requests lately...

  Here goes...

  I need to be able to highlight a single letter of the text Boolean a button.

  For example if the Boolean text is Select, I would stress the S in Selected. Maybe 'fat' he too.

  I thought about the legend, but if I overlay on top of the switch, it hampers the functionality (obstructing the button).

  There's no place to fit the legend (or label) next to the button itself.

  Any suggestions?

  Thank you.

  
  

• Boolean text of multiple buttons

  Is there an easier way to read several Boolean texts? Possibly by a loop for, but would need to be able to change the reference to accomplish this task.

  

  It looks like almost all of your buttons are in a cluster, then you might do something like this instead.

  (If the cluster contains also other controls, a TI little more code is required).

  

• Boolean text in table

  Hello

  I wonder if there is a much easier way to do it.  Basically I have a few Boolean checkboxes associated frequencies.  If the user wants to test the frequency, then they can check box.  I need to take these frequencies and put them in a table.  The example I show has only 3 frequencies.  However, the real program a lot more.  Y at - it a faster way to get the Boolean text label in order to convert the label in a frequency table.

  Thank you.

  Put only the frequency selected in the table, you can do as in the VI attached.

  Ben

• How to set the size of text with the report generator

  Hello.

  I'm trying to set the size of the text with the report generator, but I find that I can't do this. Here is an example of the code that I use. Can someone tell me what I'm doing wrong please?

  Thank you, Alec

  

  I was generation from a word template.

  I hacked my version of the Toolbox to give me maunal indicator control "model? He had obtained his permenatly self stuck on "T". I exposed this flag outside the API, so I can control under certain weather conditions I may or may not use the model police.

  Does anyone know how to use this toolkit, or I did the right thing?

  Cheers, Alec

• typedef red dot coercion cluster with node property value

  Hello!

  I have a project more vast, where I have parallels of DAQ and other calculations. In the project that I have spend all my relevant data between different parts of the program by using a typedef cluster control, so if I need to add the new element, it updates everywhere in my project. My problem is, when I want to update the items of this control on the graphical interface of typdef in what concerns changes in different places in my program, I use the property for this node. It works normally, but sometimes, I get a really strange behavior... sometimes the enum element not updated and so on...

  I have attached a simplified version, only including the party concerned...

  No idea what I did wrong?

  Thank you very much!

  The attached file and the picture shows a way to write about the control with nodes of property.

  Run the program. You can change the "current GPIB Subvi" selection or select a control (via index) and set its value.

  

  You can use a def enum type to select the desired control if you know that the order of the controls will not change.

  Steve

• HP DeskJet Ink Advantage 1515: prodlem print text with black letters

  Hello. I have the Hp DeskJet Ink Advantage 1515 AIO for 3 months. In the last month, I have a problem with the color black. When I print the text with black letters that some lines are not printed, but if the same row is a different color than black, the line is printed correctly. What could be wrong? I installed the latest drivers and I run cleaning and second level cleaning. I send you some samples of prints (I printed that document several times with the same result). Thank you.

  

  

  Hello @geopap,

  I saw your post about the problems you are having with your black cartridge and I might have some suggestions that you might try.

  1) are you using genuine HP ink cartridge? HP recommends that you use genuine HP cartridges. HP does not guarantee the quality or reliability of the ink cartridges not HP or full HP ink cartridges. If you don't use a genuine HP ink cartridges, the steps in this post could not solve the problem you experience. We could also see how supplies no HP compared to reloaded cartridges or reconstructed according to the buyers lab report.

  I also see the limited warranty for cartridges HP ink and print heads replaceable by the customer of consumable inkjet HP.

  (2) you mentioned that you had this printer for 3 months - is always the original ink cartridge that came with it? Is is possible that the cartridge is empty, you have tried a new cartridge yet?

  The following information is in this article; Using ink in ink jet printers - it addresses different aspects of using ink with HP printers.  Ink is used in a number of ways throughout the inkjet printing process. In general, ink in a cartridge of ink is used for printing of documents, photographs and these other materials. Some ink, however, must be used to maintain the health of the print head; little ink is residual; and little ink evaporates.

  HP offers two models of General inkjet print head: integrated into the ink cartridge (integrated print head: HPI), and a long lasting printing head integrated to a printer that has individual ink cartridges (IIC).

  There are several circumstances where color ink may be used mainly to improve the print quality and sometimes improve printer reliability, even if the document appears to be just black text-and-graphics. Many printers HP uses chemical interactions to improve the quality and permanence of the black paper text-and-graphics by adding a small amount of color ink in some black areas. A few dark images that have black air may contain a combination of inks, black and color. For photos and images in black and white, a mixture of colors called 'composite black' can be used to achieve the image quality greatly improved and more fluid gray tones that can be accomplished with only black ink. Some inkjet printers use black ink, Pigmented, which is incompatible with a bit of photo inkjet paper. In this case, the dark or black areas are composed of color inks. Page performance test is carried out with all the cartridges (black and color), installed in the printer. For more information, see inkjet by page .

  (3) you can also try the suggested steps:

  • Solving print quality problems
  • Printer prints a blank Page or doesn't print black or color ink

  Please let me know if any of these steps has resolved your problem, or if there is anything else I can do to help.

  I look forward to hear from you!

  Thank you