Definition of each level of internationalization

Similar Questions

• ActionScript 3 - Save and load for each level

  Can someone help me
  I create each level in different places.
  Stage 1 for level 1,
  Scene 2 to level 2... so now.

  I want when player push the home button on android hardware, it will save level or charge when the player wants to play the next time.

  I'm already searching the Internet and understand that I must use sharedObject to save and load. But I have found no code example appropriate for me to study.

  And now I don't know how to solve this problem.
  

  Create the SharedObject class and give it an instance in the first frame of the project:

  var mySO:SharedObject = SharedObject.getLocal ("myProjectID");

  var theScore:Number; It's the score of the player.

  if(!mySO.Data.myScore) / / check the shared object data if there is no data in the name myScore the value to 0, because the first round will not be any data in the shared object, we will write the data later.

  {

  theScore = 0;

  }

  on the other

  {

  theScore = mySO.data.myScore;

  }

  if(!mySO.Data.myFrameNumber) / / same thing here, we will check if there are data to the name myFrameNumber, if there is no, don't do anything.

  {

  fake;

  }

  else / / if there is

  {

  Stop (mySO.data.myFrameNumber, mySO.data.mySceneName);

  }

  All code above must be in the first image.

  NAW every time you want to update the data, for example when you go to the next level using:

  mySO.data.myFrameNumber = currentFrame; the current frame has been preserved in the name "myFrameNumber".

  mySO.data.mySceneName = currentScene.name; the current scene has been preserved in the name "mySceneName".

  mySO.data.myScore = theScore; the score was kept in the name "myScore.

  mySO.flush (); the new data has been written in the class of the shared object.

  You can write any value in the same way

  And if you want to delete the data for a use of reason:

  mySO.clear ();

• Definition of the level drive shares with PowerCLI does not

  I am trying to build a quick script that pulls a cluster of virtual machines from a text file, then changes the value of their share of disc normal level to high. I've never used this before command in powercli then that I was just trying to get the syntax right in a single line to the console. I can use the Set-VMResourceConfiguration command to set the CPU shares successfully and memory to high, but when I try to define the actions of high disk command has been executed, but the actual value does not change in the virtual center of normal to high as it does for CPU and memory settings... Has anyone ran into this behavior before? Virtual machines are running version 10 hardware and have updated tools. Thanks in advance.

  

  You must specify the actions by disc

  Maybe not the best way to do it, but it works

  Get - VM VM | Get-VMResourceConfiguration | Game-VMResourceConfiguration-drive (HardDisk Get VM) - high DiskSharesLevel

• Definition and top-level varialbes appellant

  Is it far from call and set a variable of higher level of a child element in this way I can access the variable no matter I come from inside the app. For example, I have a connection component that gets the user ID. Then I would set this username to a scope that is accessible from any other component that I use the user ID to validate other cfc calls and so on.

  perfect

• Levels of raid Volumes Compellent

  Hello.

  We are looking into buying a Bay Compellent, Dell, but before I look for in its technology.

  Unfortunately, the few public records on the SC8000 are very brief.

  I'm looking for information how the table handles its raids, from what ive understood, when you create a volume, some data will be placed on raid 10, some on raid 5 and some might end up on raid6 (prioritization).

  But the definition of these levels of raid? They simply come from all disks of a certain type, say raid10 ssd and SAS - NL's raid6. or are they built raids more as how 3par manages the CPG, creating mini-raids out of pieces of different discs?

  HP also has a wealth of easily accessible information about the paintings of 3par, I can't find anything for compellent :(

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/manualsResults?sp4ts.Oid=5044394&AC.admitted=1388181376886.876444892.199480143

  OK - if really it's better done in person with someone who can demo and animate the allocations of blocks for you.

  BUT

  Compellent storage virtualized Tier - so, for each level of storage (which are defined by the disks of like I/O features such as speed control, flash type, etc.) all of the devices used to treat each IO.  HDS let each LUN to have several RAID algorithms in use at the same time. The ideal on this would be to have write operations occur in RAID 10 (fastest to write) and read operations to get the RAID5/6 (more effective space). RAID types reserve NOT a specific amount of physical disks - but rather function as a method of organizing for blocks of different LUNS across all the disks in a pane.

  Data Progression (Tiering) extends this feature to allow volumes exist with blocks into several levels based on age and the activity of each block. The LUN is presented as there is no difference for servers based on the location of the data and the blocks can be shifted dynamically as criteria. Recently given Progression has been expanded to allow the mixing of writing optimized and read optimized Flash SSD levels that revolutionize the market tables around without resorting to the use of SSDS as a front-end cache. Data is transferred more quickly, then a normal progression among the readers of optimized for reading writing optimized SSD to keep performance levels greater than 100 K IOPS / s while valuing the cost differences inherent in MLC drives (they are cheaper).

  http://www.Dell.com/learn/us/en/qto08/shared-content~data-sheets~en/documents~Dell-Compellent-software-suite.PDF

  One thing that really sets storage Compellent, is that the license is NOT related to the material. If a controller SC8000 can be replaced without purchase of multiple licenses or invalidate the original license. The license is perpetual and abstract the hardware that is used. So if I have a HDS I bought 5 years through a license for all the features for 16 disks I can apply this license to SC8000 controllers and SSDS (up to 16 spare non-pieces) and start using it.

  I think that if you use this site as your jumping off point - http://www.dell.com/learn/us/en/04/dcm/flash-storage you will find a lot of information just look at software storage Center rather than the specific hardware building blocks.

• Configure the read-access via user-defined privilege level

  Hello everyone,

  I m looking for the best configuration to restrict a user read-only. The restriction must be configured through CLI not GANYMEDE.

  Material: 3750 (probably not interesting for that matter)

  More old IOS: 12.2 (53) SE1

  The user should be allowed to:

  • See the running configuration
  • trigger all sorts of orders-show
  • Ping and traceroute of the device

  The user should not be allowed to:

  • Download/delete/rename files on the flash memory
  • Enter the level 15 (not sure if I can avoid it)
  • all orders despite those level 1 and those specified above

  Can someone help me with this?

  Thanks in advance!

  I have won´t forgotten messages useful rates

  Hi Tobias,.

  You can

  set up multiple levels of privilege on a switch as explained below.

  By default, the Cisco IOS Software has two modes of password security: user EXEC and

  Privileged EXEC. You can configure up to 16 levels of commands for each mode.

  By configuring multiple passwords, you can allow different sets of users to have access to

  specified commands.

  For example, if you want many users to have access to the clear line command, you can

  He attributed a level 2 security and distribute the level 2 password fairly widely. But if you

  want more restricted access to the command configure, you can assign security to level 3

  and distribute the password to a more restricted group of users.

  Definition of the level of privilege for a command

  Beginning in privileged EXEC mode, follow these steps to set the privilege level for a

  control mode:

  Purpose of command

  Step 1

  Configure the terminal

  Enter global configuration mode.

  Step 2

  level privilege mode level control

  Set the level of privilege for a command.

  For mode, enter set for the global configuration mode, exec to EXEC mode, interface

  for the interface configuration mode, or the line for line configuration mode.

  For level, the range is from 0 to 15. Level 1 is normal user EXEC mode privileges.

  Level 15 is the level of access allowed by the enable password.

  For command, enter the command that you want to restrict access.

  Step 3

  activate the password level

  Specify the password to enable for the privilege level.

  . For level, the range is from 0 to 15. Level 1 is normal user EXEC mode privileges.

  Password, specify a string from 1 to 25 alphanumeric characters. The string cannot

  start with a number, is case sensitive and allows spaces but ignores leading spaces. By

  by default, no password is defined.

  Step 4

  end

  Return to privileged mode.

  Step 5

  Show running-config

  or

  Show privilege

  Check your entries.

  The first command shows the level of the password configuration and access. The second command

  Displays the privilege level configuration.

  Step 6

  copy running-config startup-config

  (Optional) Save your entries in the configuration file.

  When you set a command to a privilege level, all commands whose syntax is a subset of this

  control can also be programmed at this level. For example, if you set the show ip traffic command

  level 15 show commands and show ip commands are automatically set to privilege level

  15 unless you set them individually at different levels.

  To return to the privilege by default for a given command, use the no privilege mode level

  control of level global configuration command.

  This example shows how to set the command configures to focus on level 14 and set

  SecretPswd14 as the password users must enter to use 14 level controls:

  Switch (config) # level 14 exec privileges set up

  Switch (config) # enable password 14 SecretPswd14 level

  You can also change the default privilege for every user level.

  Change the level of privilege by default for lines beginning in privileged EXEC mode follow these steps to change the default privilege for a line level: complete order

  Step 1 Configure terminal enter global configuration mode.

  Step 2 line vty select the virtual terminal line to restrict access.

  Step 3 privilege level change the default privilege for the line level.

  For level, the range is from 0 to 15. Level 1 is normal user EXEC mode

  privileges. Level 15 is the level of access allowed by the enable password.

  End of step 4 back in privileged mode.

  Step 5 show running-config or show privilege

  Check your entries. The first command shows the level of the password configuration and access.

  The second command shows the privilege level configuration.

  Step 6 copy running-config startup-config (optional) save your entries in the configuration file.

  Users can replace the privilege level that you set by using the privilege level line configuration command

  you connect to the line and enabling a different privilege level.

  They can lower the privilege level by using the disable command.

  If users know the password to a higher privilege level, they can use this password to enable the higher privilege level. You can specify a privilege for your console line level to restrict the use of the line or high-level.

  To restore the default line privilege level, use the no privilege level line configuration command. Also I send you a document for your reference.

  http://www.Cisco.com/univercd/CC/TD/doc/product/LAN/cat3750/12225see/SCG/swauthen.htm #wp1154063

  HTH

  Concerning

  Reem

• What is the level of output voltage of the NI 622 X

  There is no clear definition of the level of output voltage of cards X NI DAQ 622 in the spec.

  Are they drain open output? What is their level of voltage? The programmable ETC, voltage level is able to be configured to 3.3 or 5V?

  Look at the graphs on page 8.  This is not the usual way of Voh specification, but is is very informative. Other charts display different values from the DMV.

  

  Lynn

• Each scale minimum and maximum for each slide table slides

  Hello

  is it possible to set values mini/maxi different scale in a group of slides via property nodes? As far as I know that's not possible. All the slides in the table must have the same minimum and maximum value. I only find a way to change all the scales at the same time. Are there any other ideas?

  Thanks in advance

  LVW

  Hi lvw

  You are right on the table, it is not possible to have different scale values. If you don't have a small number, you may be able to use a cluster of sliders, then you can set each individually. You can use the table for cluster and cluster to table to convert data types. You can also use cluster control references to define each level individually.

  Ian

• Question on connect by level 2 records

  My query begins with the records of two pairs and continues with the rank and adds two records to pair again.

  However, the unwanted extra each level (mbc 11, 12 wtc...) in the result.

  would you help me.
  

  My request;

  SELECT CUT (SUBSTR ("abc 11 12 11 22 33 kbc vbc wtc mbc mbc 17 45', INSTR kbs (" abc 11 12 11 22 33 17 mbc kbc vbc wtc mbc kbs 45 ', ' ', 1, level) + 1, "))

  INSTR ("abc 11 12 11 22 33 17 mbc kbc vbc wtc mbc kbs 45 ', ' ', 2, level + 1)-INSTR (" abc 11 12 11 22 33 17 mbc kbc vbc wtc mbc kbs 45 ', ' ', 1, level)-1)) AS PAIR

  OF THE DOUBLE

  CONNECT BY level < = LENGTH(' abc 11 mbc 12 wtc 11 vbc 22 kbc 33 mbc 17 kbs 45 ') LENGTH (REPLACE ('abc 11 12 11 22 33 17 mbc kbc vbc wtc mbc kbs 45', ' ', "))-1

  Outcome;

  ABC 11

  MBC 12

  WTC 11

  Vbc 22

  KBC 33

  MBC 17

  KBS 45

  Problem result;

  ABC 11

  11 mbc

  MBC 12

  WTC 12

  WTC 11

  11 vbc

  Vbc 22

  22 kbc

  KBC 33

  MBC 33

  MBC 17

  17 kbs

  KBS 45

  Hello

  Jimmie_M wrote:

  I thank very you much for your time. Thank you!!!

  is it possible to keep my request to get the result without regexp_substr.

  If I run regexp_substr in the table, the slow performance.

  Thank you

  You were on the right track with your first message.  The problem with this request was that you were each pair of words:

  • Word 1 and 2,
  • Word 2 and 3,
  • Word 3 and 4,
  • Word 4 and 5,

  and so on.  You don't want that every other pair:

  • Word 1 and 2,
  • Word 3 and 4,

  and so on.

  Here's a way to do it:

  WITH the data AS

  (

  SELECT ' abc 11 12 11 22 33 kbc vbc wtc mbc mbc 17 45' AS str kbs

  OF the double

  )

  got_space_pos AS

  (

  SELECT 1 * LEVEL AS n

  , INSTR (str, ' ', 1, (2 * LEVEL)-1) + 1 AS start_pos

  , INSTR (str, ' ', 1, (2 * LEVEL) + 1) AS end_pos

  FROM the data

  CONNECT BY LEVEL<= (="" length="">

  -LENGTH (REPLACE (str, ' '))

  ) / 2

  )

  SUBSTR (str, start_pos, end_pos - start_pos) SELECT as a PAIR

  OF got_space_pos

  JOIN CROSS data

  ORDER BY start_pos

  ;

  Output:

  PAIR

  -------------

  ABC 11

  MBC 12

  WTC 11

  Vbc 22

  KBC 33

  MBC 17

  KBS 45

  Are you regular expressions of course are initially slow Paulzip query?  That's maybe something about your data you have not shown or explained.  As said by ground, you must always follow the Forum FAQ:

  Re: 2. How can I ask a question in the forums?

  so that people who want to help you can recreate the problem and test their ideas.

  In addition, the sample data (CREATE TABLE and INSERT statements), be sure to upgrade your version of Oracle.  A recursive (available in Oracle 11.2 and upwards) WITH clause might help in this problem. or maybe CROSS APPLY (Oracle 12.1) would be useful.

  Simplify the prblem as much as possible; for example, you generally need not show all columns in your actual tables, only those involved in the problem.  But make sure that you validate the example data illustrate the real problem.

• AP INVOICE approval line level

  Hi all

  My business requirement must have AP invoice approval of line level based on the applicant at each level of the line.

  I created the approver group which will be applicant ID of all the invoice lines. I joined the line level, rule.

  When launch approval, fires of workflow for the first line, and after the applicant approves the first line, the workflow triggers the process for the second line.

  (1) However, our requirement is to launch when the approval, the approval process should trigger for both lines (line 1 and line 2 in this case) at the same time.

  Please help how to achieve this goal through the installation of the SOUL.

  (2) as only one matching row details must be sent to the respective applicant when sending the notification of the approval.

  For example, the line 1 / amount USD 500 / applicant's name: ABC

  Line 2 / 200 USD amount / applicant's name: XYZ

  As of now the details of the two lines will ABC and XYZ when we need to send only line 1 with 500 USD to ABC and Line2 with 200 USD to XYZ.

  It would be really great if we get a quick response on this. Thank you very much!

  Thank you

  Partha

  I don't think that is possible with current/seeds of invoice approval workflow design.

  Approval parallel for invoices of purchases is a new feature in 12.2.4 and may be extended to the return of 12.1.x by applying the hotfix referenced in this document:

  R12: New feature approval parallel processing invoices (Doc ID 1904137.1)

  However, the new invoice approval workflow currently supports parallelism at the header level only

  Concerning

• Is it possible to create the formula at the level of the hierarchy?

  Dear all,

  In case, I've dimension branch consist of region, sector, branch

  And I have 3 measures Region_target, Area_target, Branch_target

  I want to create new metrics and check if members at the level of the regions, would like to show Region_target measures

  And also for the region and the target.

  So I tried to write the case where the formula, but impossible to refer to the level of the hierarchy, Ho can I do?

  Something like

  Case when the level. Branch_Hierarchy = region then Region_target

  When the level of . Branch_Hierarchy = area, then zone_target

  of other Branch_target

  end

  Please advise, my problem is to only synchronize the targets for each level. Target of all the branch cannot amount to area and target of any region cannot amount to the region.

  Please notify.

  Thank you

  What you're looking for, it's 'level based on measures '. Basically, you'll logical columns called 'Target' that has 3 sources from 3 LTSS - one for each level.

  LTS 'Target area' level 'Région' is the physical column "Region_target."

  LTS 'Target area' level 'Space' is the physical column "Area_target."

  LTS 'Branch target' level 'Branch' is the physical column "Branch_target."

  You are faced with one of the main features and capabilities of OBI: the power of the LTSS and levels in the business model and of the mapping layer. It is crucial to understand these concepts. It's what separates OBI of all other solutions out there.

• Installation of pressure level n

  I just got a demo of adobe version animate CC, because I wanted to check how it works. I used adobe flash cs6 when he was present and now it has changed. I have a problem on the definition of the levels of pressure on Pro Intuos big Mr. I don't see any possibility of using a pressure level as it was in flash cs 6 or at least is wisible me nt. Previously, it was just under the Brush tool, and now he's gone. I tried to check the help of adobe, but the advice that it was just the text without saying where are the options I should enable or change. If anyone can send me help with screenshots, I'd be very happy.

  The options of pressure and angle of brush are in the same place to animate as they were at Flash CS6. Once you select the Brush tool, look to the bottom of the tool palette and you will see the options that are available. The icons are different in Animate, but the functions are always in the same order and in the same place. The pressure looks like a bulls eye now.  You may need to adjust the size or the shape of the tool palette to see the options below.

• Formatting through properties of hierarchy level - Can you apply to entire column?

  Hi, I'm looking at the functionality of the hierarchy in 11g. I see that in the criteria tab where it is possible to give the dimension of the formats different members based on what level of the hierarchy, they run (using the 'Level of hierarchy properties' dialog box). This formats the lables of appropriate size, but I also want the numbers associated to inherit the same formatting. Is it possible to do this? I wish that all data in the line of a certain level of hierarchy to carry the same format in order to easily distinguish one level on the other. I don't see a ton of value to add this option, if it applies only to this column.

  
  

  If this can be done through the properties of a hierarchy level, is there another solution?

  
  

  Thank you

  
  

  Trevor

  Is not possible. If the number of items at each level is inferior in number, apply conditional formatting manual on the measurement column.

  Thank you

  ~ KKT ~.

• Addition of approval in vCAC levels

  Is it possible to set up permissions in this way as if we have the hierarchy like this

  Level1

  Level2

  Level3

  If Level1 is approve or reject any application for approval should go to level 2 and then level 3

  Yes.  In the approval policies, you create multiple levels.  These levels shall be in the order of your management hierarchy. You will then define your policies around which and how many approvals are required within each level.  After level 1 approved the request will go to level 2 for approval.

• each of the elements of the Summit differ according to the value

  I have a lot of elements in the form box, how to tell the difference between the entered value and not the elements with a colored background.

  I try to apply the attributes of each level of items, but I couldn't reach. for example P3_SAL

  my workspace: ram_r & d

  username/password: aramani/apex

  application: 29288:3

  I've been trying

  http://Apex.Oracle.com/pls/Apex/f?p=73000:17

  Statement of JS

  var requiredFields = new Array();
  requiredFields[0] = "P1_REQUIRED1";
  requiredFields[1] = "P1_REQUIRED2";
  
  function f_chk_required(pThis) {
  
  console.log('pThis.id:'+pThis.id);
  if (requiredFields.indexOf(pThis.id) != -1) {
  
    var clear_val = $x(pThis).value;
    console.log('Value:'+clear_val);
    if (clear_val == '')
      $x(pThis.id).style.background = '#FFFFCC';
    else
      $x(pThis).style.background = '#FFF';
  
  } // indexof
  } // function
  

  Run when the page loads

  for (var i = 0; i < requiredFields.length; i++) {
      f_chk_required($x(requiredFields[i]));
  }
  

  I'll blog a more complete description of this at some point, it expanded even more.

  Scott