Definition of wrong answers on a custom quiz

Similar Questions

• Reports custom Quiz, answers correct by Pool

  Hi all

  Question about custom quiz reports when using the pools. I don't know how to ask the question without example, so here:

  Let's say you have a quiz with 3 pools, A, B and C, and each pool has 20 questions each.  The quiz itself uses only 20 total questions. (It's only a 3rd questions! «(But this allows users to take the test several times and get a different questionnaire each time).»

  So, is it possible that I can activate the reports to inform the user of the questions how they are wrong on the A, B and C at the end of the quiz questions?

  Something like:

  Final score: 75%

  Pool A correct Questions: 5/7 (71%)

  Pool B correct Questions: 7/7 (100%)

  Pool C correct Questions: 4/6 (67%)

  Thank you!

  Do not use the event drag enter.  Which will tell you if the user gets this question just or not.

  You must use the event on success for each slide of the question randomly to execute advanced Action, which increments the variable for the pool that pulls the slide.

  The alternative event for these same slides is the event on the last attempt.  This is the event you have to use to run and the fast Action if you want to have a different variable that followed how many wrong answers by question pool.

• Personalized and customized quiz feedback slide menu slide

  Hi all

  I was wondering if anyone can help point me in the right direction as to how I can use Advanced Actions/Variables to produce two things, a slide in menu that displays a check when an article is complete and feedback simple quiz slide that displays a summary of the issues with correct/incorrect.

  Slide Menu

  I am trying to build a menu so that the learner can go into any unit in any order. When they finish the slides in this unit, they are returned to the Menu slide and a checkmark against that unit. There is an example below to give you the idea.

  

  Quiz feedback Slide

  I also try to create quiz feedback slide to allow learners to know what questions they got wrong in a quiz. I don't want to use the revision Quiz feature like that shows me the wrong answers and questions. I would like to just a summary slide, as in the example below.

  

  For the course menu, I use some useful posts of Lilybiri and try to adjust his tutorial on dishes customized to the http://kb2.adobe.com/community/publishing/855/cpsid_85530.html to show ticks instead of hide links of the unit. I don't know where to start with the feedback of quiz slide.

  I hope that someone with a little more experience stocks advanced/variables will be able to intervene here and let me know if I'm going in the right direction with this.

  Many thanks in advance,

  Loraine

  Hello

  I thought that my blog post on the menu template was doing all what you want with the menu.

  Need more time to explain about your second question later.

  Previous! For the slide of Feedback, you need to maintain for each answer, if he had answered correctly or incorrectly, each in a user variable. To this effect, you could use cpQuizInfoLastSlidePointScored.Create action upon entering the next the question slide and stores its value in a user variable (because the system variable will change after each question), it will contain the value 0 (incorrect), or something different (correct). ATTENTION: you need to repeat this action also after the last question, perhaps by inserting a short blade just before the slide where you want to display the result. Entering into this 'result' slide, which must contain the correct and incorrect checkmars, in hidden state, you can trigger another advanced conditional action that checks each of these user variables and makes the symbol not visible. You get the idea? Need more help?

  Lilybiri

• Captivate 9 wrong answers

  Hello. Captivate in 9 if he made a true and false question quiz. How to do if a user got a wrong answer, he will go to the quiz results and put an end to your quiz? What I want is to not go through all the questions. If I missed a question, it will end the quiz right here.

  Thank you very much.. It worked perfectly... and thanks for the quick reply

• For random glitch of today '... wrong answers are all gone.

  After work through a problem with the results page continue button does not, I now have a comprehensive questionnaire (10 issues, no breaks) which lacks the legends of wrong answer.  I KNOW that I did not delete these... and I can't find a way to get back them.  I tried to copy the caption of a new question slide with no luck.

  Any help would be greatly apprecated.

  Thank you

  Brian

  Can you check levels of failure Quiz properties, accordion of the Action? Maybe it is set to 0, then you lose the legend of failure.

• Wrong answer of the Windows Calculator

  Scientific calculator option gives the answer of rigth for example, 2 + 3 * 4, it gives = 14, which of course is 2 + 12 = 14.   BUT the Standard Calculator option gives the WRONG answer = 20 WHY?   There is no media so tell arithmetic rules don't multiply it all first, then add.  It's so bad that children at the school and everyone will be getting wrong answers and affect their learning?  This is false in all versions of Windows why?

  Hello

  To add to the excellent info from Linney:

  The scientific calculator uses the hierarchy of mathematical operations and the Standard Calculator
  covers the features 1 both in the order entered.

  Hierarchy of mathematical operations
  http://www.tpub.com/content/DOE/h1014v1/CSS/h1014v1_36.htm

  http://www.tpub.com/content/DOE/h1014v1/CSS/h1014v1_37.htm

  ---------------------------------------------------

  Karen - free Calculator - calculator precision
  http://www.KarenWare.com/PowerTools/ptcalc.asp

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How can I interrupt audio on the slide when the user selects the wrong answer

  Hello world

  I tried to find a way to pause audio into a slide when the user does NOT click on the click box.

  I put a text caption, an audio file (1) and click box that has an audio (2). The user must choose a suitable location on the slide, if they err, a legend, failure, which includes an audio object (2) is displayed. The problem occurs when the user wants to answer the question before the end of the audio (1). If they get the right answer that's fine, but if the answer is incorrect, the two audio files overlap. I have a recon, I'm looking for a solution where audio (1) is paused or stopped if the user gets the wrong answer. Could someone me referring to the best way to overcome the problem?

  Why not replace the slide with an Audio statement audio play on enter for the slide?  And then you will need a box of extra click that covers the entire slide, under the present click box and attaches an action standard success him "Stop audio triggers. No legend of failure, nor the fact that for this second click box.

• If the declaration for a wrong answer and right

  
  OK, Hello and thanks for posting. Includes the project

  1 breakdown of the ISSUE

  2. you enter your answer in a text ENTRY box

  3. click on enter - button.

  4. There is a wrong answer which is Ox and the correct answer is O

  4. According to your response it jumps you to the screen wrong answer or congratulations!

  
  the inserted code is different from the book,

  It shows that;

  on (release) {}

  If (½la is "Ox")

  (_root.answer.gotoandplay (5)})

  Then theres another

  on (release) {}

  If (response == Ox) {}

  gotoAndPlay (5)

  (5) = the good screen and (10) is the incorrect screen if they choose = O

  the variable for the input text box = response

  Thanks for your help

  only a fool would require coding attached to your button.  If it's your teacher, you have an incompetent teacher unless they're trying to make a point about the problem how it is for attaching code to objects.

  Use a real (not a movieclip) button:

  {We (Release)}

  {if(iTF.Text=="OX")}

  _root. Answer.gotoAndPlay (5);

  } else {/ /}<- this="" is="" probably="" what="" you="" want="" instead="" of="">

  _root. Answer.gotoAndPlay (10);

  }

• Do not advance after incorrect answer quiz (quiz uses the user variables to show the wrong answers)

  Hi all

  Long time lurker, first time poster. I hope someone can help me.

  After watching this excellent video about adobe captivate blog "so what were the right answers in any case" I created a quiz with user variables and conditional early action. It displays a red x next to each question answered correctly at the end of the quiz.

  • I created the variable user for each question to a value of 0. On an incorrect answer, the variable would be set to 1.
  • At the end of the quiz is a blade that question and shows a red cross next to each question with a variable set to 1. uses conditional action that is triggered 'upon entry.

  It works, but my problem is when I saw the quiz (in the browser or SWF), on an incorrect answer, the legend of the failure appears but does not really advance the question when I click anywhere or press o. It works well on the correct answers.

  Can I sovle this by adding a next button, but I'd like to understand what I'm doing wrong.

  • Using captivate 6.0.1.240 (copy in box)
  • Windows 7
  • images on the quiz properties and conditional action below

  Any help appreciated.

  Concerning

  Jacob C

  

  

  I tested this workflow on 6.1.319 and it works fine. If a little guess in the wild... No 6.0.1.240 around at the moment. Seems strange, because a simple action like your Assign action should normally release the read head. But of course, it's a question slide and they do not always behave as expected. Could you try to replace the action of the beneficiary by a standard tip with 2 statements, like this action:

  • Assign the var_question_1 with 1
  • Continue

  And please, let me know if it works? This could be a difference between the two versions, but not sure at all.

  Lilybiri

• Navigator custom quiz

  I'm building a custom browser quiz in Captivate 5.0 as shown below that will be displayed on question slides

  

  They consist of static widgets taken button display for the rest of the project. There are three buttons for each question placed on top of the other and they will show/hide according to the success or failure of a question. Each has the action «jump to slide...» ", so that the user can access any question in the questionnaire that he wants.

  My only problem is that I want that the user has two attempts for each question. If a question is an incorrect answer to the first attempt, and then the user leaves which, upon his return from their previous answer (which is obviously incorrect) is locked and they can not change (as shown below).

  

  This does NOT happen when browsing using the value default 'back' and 'skip' buttons that Captivate quiz normally. What is different about how work these default navigation buttons and my buttons "jump to slide...". » ? Is it possible to stop what is happening?

  Thank you

  Rick

  I just tried this in a Captivate project 5.5 with 5 slides of true/false and widgets of static button for the next and previous buttons.

  With each question set to 2 attempts and 2 levels of failure, even if I got a question wrong and the static button widgets to navigate away from the slide, then again I could always answer the question for the second time without problem.  It does not lock the first answer.

  Maybe what you're having is a bug in Captivate 5 or the static button widget that came with Captivate 5.

  Try to download and install the trial version of Captivate 5.5 to see if the issue still exists. But a word of warning... If you use Cp 5.5, only use it on a copy of your project file as it will definitely change the file format and make it impossible to change back into Cp 5.0

• Advanced shares custom quiz does not

  I am creating a quiz that is customized by using the advanced actions and checkbox widget improved Jim.

  Features of the quiz:

  • Three buttons: Try Again, then submit. The Try Again and next buttons are hidden initially.
  • Final score: name of the variable "TotalScore.
  • Attempt to count of each question: variable 'Q1Att' is initially set to 1
  • v_null the value 0

  Three good answers about 5 options:

  • Years1 - name of the variable "varAns1".
  • Years2 - name of the variable "varAns2".
  • Years3 - name of the variable "varAns3".
  • Years4 - name of the variable "varAns4".
  • Years(5) - name of the variable "varAns5".

  Shares advanced on the "submit" button:

  1 the decision: Correct

  If

  Q1Att is 1 AND

  varAns1 equals years1 AND

  varAns2 equals years2 AND

  varAns3 equals years3 AND

  varAns4 is equal to v_null AND

  varAns5 is equal to v_null AND

  then

  TotalScore of increment of 10

  Show Next button

  It works very well.

  Decision 2: Try again

  If

  Q1Att is 2 AND

  varAns1 is not equal to years1 or

  varAns2 is not equal to years2 or

  varAns3 is not equal to years3 or

  varAns4 is not equal to v_null OR

  varAns5 is not equal to v_null OR

  then

  Show the Try Again button

  It does not work. The Try Again button does not appear.

  Please notify.

  After these two decisions, I have two or three other decisions, checking for the attempt on 2nd response and failure, in that order.

  Anthony

  Fixed, got it works, with 3 decisions. My values are different (Dutch), will post screenshots, easier.

  Fundamental difference: I started the variable attempts with 2 as a default value, it was labeled v_number (got that one already in a scratch project) and is decremented by the Try Again button. Have 3 Decisions:

  • For every correct answer, which means that the variables of the checkbox must be checked:
    
    Had to hide the button once again, since he could be included in the second attempt. You see in the phrase why I value '2' for the first attempt, and '1' for the second attempt.
  • Second decision "SecondTry" displays the Try Again button if the condition is met.
    
  • Third decision is if the answer is still wrong after the second attempt
    

  I could have grouped button Again and submit to have two less statements.

  Try, my tests were positive. Bit thinking out of the box, sigh, love this kind of cleaning.

  And the measurement Standard for the Try Again button:

  

  Lilybiri

  PS You may have to add if you want to enter in the scoring of this question for a total score slide, you will know how to do this.

• Custom Quiz results page mapped for quiz interaction question IDs

  We use 9 Captivate and we want to create a quiz results page customized with five categories (each question in the quiz is tagged with 1-5 interaction IDs) each question in the module will have the points assigned to one of five categories. Each question will be worth 10 points. Each question uses an integrated in multiple choice or reactive quiz question slide. We want the results to calculate and display screen the score of the learner in each category. Thus, for example, if there are three questions in class 1 and I get two right, we want that results screen to view it: category 01:20 / 30.

  In short, we want to create five numeric variables. Each question will be assigned to a variable. Each correct answer should add 10 to the numeric variable. The results screen should display a count of five numeric variables.

  How can we do this? Please help :)

  In this case, you have the second approach. Create 5 user variables v_cat1, v_cat2... v_cat5 with a default value of 0. Create a shared action that you can attach to the success events and failure of the glide of the question. It will be something like this (didn't try, little busy at the moment):

  • Expression v_cat1 = v_cat1 + cpQuizInfoLastSlidePointScored
  • Go to the next slide

  Only the v_cat1 variable must be a parameter. When you apply this action to both events of a question, you only have to indicate the correct variable.

  On your score slide, insert this user variable in a text container.

  You want to have the maximum calculated also? Then you will need 5 user additional variables v_max1, v_max2... v_max5. Add an order more to your shared action:

  • Expression v_max1 = v_max1 + cpQuizInfoPointsPerQuestionSlide

  This means that now two parameters (variables two user).

  Good luck!

• Move forward again on the wrong answer to the infinite attempts?

  Hello

  I want to use captivate to a summative assessment where students can have a micro tent to each question and are able to move forward and backward in the quiz. From what I see at the moment when I put the question tent level infinity the slide never correct progresses until they get the answer. I want them to be able to change their answer but go ahead to submit even if their answer is incorrect? At the moment I can't see a way to do this? Is my only option to use custom slides?

  Thank you.

  You are right if you set infinite attempts on an issue, then Captivate will assume you want the student to stay on this issue until they have obtained is correct.

  Developers often find it difficult to understand how Captivate work quiz questions. There are many ways, you can configure the options of the question.  In fact, there are good reasons for seemingly odd behavior, but these reasons are often hidden by the way settings are configured.

  As a sample: once the participant sends a response to a slide in questionnaire (good or bad), and then progresses to another slide, their response to this slide is locked.  If you have several attempts on this issue enabled, AND you need to step back authorized, your attendee can go back to the previous question and try it, but if you do not have the legend to try again or on failure levels, Captivate will then appear to allow them to present a correct answer.

  If you want the user to be able to go forward even if their answer is incorrect, just turn on the key jump on the question slide.  The user can then choose to click this button to proceed to the next question.

• People are emailing me with the wrong answer to a different question

  First of all I already know and have tried to go into the menu programs to uninstall this little of the Essetials Microsoft I had (MAIL ONLY) but in this menu there is no trace of LIVE MAIL on my mail to unde C drive is listed as a file or a folder but if I try to remove it it says that I need a special Setup program

  If I try to do a clean install with firewalls, systems of told me that I have all the programs in Live Essentials installed except in parachute

  Now, I've learned that I'm missing a dll file that goes with MSN Wldcore.dll I downloaded this file twice since the announcement of two sites when I typed in the line after hitting the race he did not work, had a fight with my mother because she doesn't know that outlook express which she uses has not been done or offered that why my windows live was put out there for free

  Hello

  I suggest you for the link and check if that helps.

  http://answers.msn.com/thread.aspx?postid=c420840e-2162-42c0-b43e-bda653d3ddf1#'c420840e-2162-42 c 0-b43e-bda653d3ddf1'

  If the problem persists, contact MSN support for assistance on this issue.

  MSN support

  How to contact MSN customer service

  If the problem is specific to Windows Live Mail, I suggest you send the request in Windows Live Forums for assistance.

  http://answers.Microsoft.com/en-us/windowslive/forums

  Please post back with the results and we will be happy to help you further.

• calcuator supplied with windows 8 not giving wrong answers some calculations

  The next sum is tried in standard mode of windows 8 calculator.

  The amount is 1.00, 000 * 9% / 12 750 is the right answer. But it shows 75,000,000. Haven't tried all kinds of useless. The same problem is also with windows 7, Nokia Lumia 530. Are there settings to change? Please answer.

  Nope, see order of operations - Wikipedia, the free encyclopedia to learn why your calculation goes wrong.  You need parentheses so that he knows what order to perform the calculation.