Defragment the scan error in file C:\i386\ AGT041F. DL_

Similar Questions

• Executable cannot find the custom error code file

  I'm building a LabVIEW 2013 application on a Windows 7 computer and deploying it to a Windows XP computer. My application has a custom error code file, stored in -- errors.txt, but my executable on the Windows XP machine can't find the custom error file and returns only the string of appeal for all errors that occur.

  When you use is not an installer, I tried to copy the error code at all locations listed here: http://digital.ni.com/public.nsf/allkb/6077DBEDA4F9FEE3862571F600449501 but the application still does not load the custom errors. I have the box checked to "Error Codes customized Include" in the construction specifications.

  When an executable of construction and the development of Windows 7 to XP, where do I put the custom error code file? It is found in Program Files (x 86), but find not because it's XP?

  It's been a few months that I posted this question and I do not know if someone cares about this track, but the solution I found was to put the custom in error code file \National Instruments\Shared\Errors\English\

  There are other places that the runtime will look for the custom error codes (I tried all the ones listed above), if the same error codes exist in 2 places the error popup will appear two error messages. Error default 1, it looks like:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: Command requires GPIB controller charge controller.

  So if you have a custom error code file and it is available in 2 places that LabVIEW RTE check error codes, you will get the same message before and after the =.

  List the error as "still included" file when building the executable or by checking the box to include files in error did not tour, obviously. Unless you create a Setup program to distribute the application, the error code file must be moved manually. Shared\Errors file works best for me because it's a place that makes sense.

  Also, don't worry - it doesn't me taken 5 months to understand this point, I do not update all my loyal followers (ha) with a solution.

• App does not start on the Simulator, error: (this file could not be opened. Make sure you have the proper permissions and try again).

  I get an error when I try to run my application after packaging and loading on the Playbook Simulator.

  When I try to start my application, I get a white screen for 1 second, it flashes black for a second before leaving white and then I get this error message: "this file could not be opened. Make sure you have the proper permissions and try again. »

  

  I have in my source folder:

  config. XML

  Icon.PNG

  Index.html

  Load.js

  Progress.CSS

  I don't think that my code using anything that requires permissions. (that is to say, does not use the shared files, or camera, etc.)  At the moment it is simply a text box and a button that calls code that retrieves data from the database I have. API reference, he said that I don't need permission for the use of the HTML5 and sql database.

  This is my config file:

  
  http://www.w3.org/ns/widgets"
          xmlns:rim="http://www.blackberry.com/ns/widgets"
          version="1.0.0.0">
  
    Test
  
    
      A simple test app.
    
  
  My Name
  
    
  
  access_shared
  
  
    
    
  
  
  

  I don't have any uses which I put in the "access_shared" to test, but it did not help.

  My app works very well in the Opera browser, and also in the training Simulator, I don't understand why it does not work on the playbook Simulator.

  I read something on the extension of the Javascript and exporting to a JAR file. Do I need to do? I have only a single .js file with a few defined variables and functions that implement the functionality of database/sql.

  I can't think of anything...

  Make sure that the index.html file referenced in your config.xml file has exactly the same name as the index.html file in your application.  You list all of your files with the 'I' for 'Index.xml' in capital letters.  The Tablet OS applies a case-sensitive file system.

  If this is the case, I suggest rename Index.html index.html, reconditioning and try again.

• What are the causes "error of file photoshop-37".

  I saw a post for this problem 4 years ago, but he had no answer. So I was hoping a response has resurfaced since then.

  When you import a menu again in again in Photoshop, you receive this error message.  I start with a submenu of model again, making minor changes to the first button in Photoshop, do a save as in Photoshop, import of the menu in still and changes come in fine.  I make the same changes to the subsequent buttons, except in Photoshop, and the changes will be fine.  But after several cycles, I get the error "File error Photoshop-37" message and I am dead in the water and cannot continue. I use this method for years and this is the first time I met this error message.

  First of all, I apologize: the mistake of photoshop only we see often is - 1. I totally missed your - 37 and in the text - 45. I don't find any success on the web with-37.

  Secondly, I am surprised that you get results positive working out of google reader. Try the local files only to see if that fixes the error.

  Thirdly, if you want to use one save slot, do it outdoors yet fully (copy the model of the library to change open, another location, then save under), then import the file.

• Download of the slightest error of file system on mime_header w "digital error or value".

  I am trying to download a pdf (and xls) file from the linux file system by using this procedure. I have a directory defined for "OFFICIAL REPORTS" in Oracle, and I can verify that the file exists in this directory. The length of the queue is returned, but we get an error on the statement of owa_util.mime_header. Here is the procedure:
  
  CREATE or REPLACE procedure Web_Download (file_in IN VARCHAR2)
  AS
  l_filename BFILE.
  V_LENGTH NUMBER;
  
  BEGIN
  
  l_filename: = BFILENAME ("OFFICIAL_REPORTS", file_in);
  V_LENGTH: = DBMS_LOB.getlength (l_filename);
  
  dbms_output.put_line (' length of file: ' | v_length);
  --
  BEGIN
  -implement the HTTP header-
  
  -dbms_lob.open (l_filename, dbms_lob.lob_readonly);
  
  sys. HTP.init;
  
  OWA_UTIL.mime_header ("application/octet", FALSE);
  
  sys. HTP.p ("Content-length: ' |") v_length);
  
  sys. HTP.p (' Content-Disposition: attachment; filename = "" | ") file_in | '"' );
  
  OWA_UTIL.http_header_close;
  
  WPG_DOCLOAD.download_file (l_filename);
  
  exception
  WHEN no_data_found
  THEN
  BEGIN
  dbms_output.put_line (' end of file reached.) Closing file ');
  END;
  
  WHILE others
  THEN
  dbms_output.put_line (' error num: ' |) SQLCODE. "message: ' |" SUBSTR (SQLERRM, 1, 64));
  dbms_output.put_line (' another error has occurred.) Closing file ');
  -DBMS_LOB. Close (lob_loc);
  END;
  DBMS_LOB. Close (l_filename);
  
  END web_rs_download;
  /
  
  When we run the package in Oracle, we get this dbms_output:
  file length: 2819089
  error num:-6502 message: ORA-06502: PL/SQL: digital error or value
  Another error has occurred. Closing file
  
  In APEX, we see a download dialog box to open or save the file, but the download is 0 (empty) bytes. We checked the network ACLs, we checked the APEX body for print server settings, we are at a loss. Help, please.

  Not sure what your question is, but it works fine for me view the PDF in a page.

  html text area
  -------------
  < object data = "f? p = & APP_ID.: 1: & APP_SESSION. ": APPLICATION_PROCESS = DO_SHO_PDF:P1_FNAME:test.pdf ' type = ' application/pdf' width ="500"height ="500"> alt: < a href =" f? " p = & APP_ID.: 1: & APP_SESSION. : APPLICATION_PROCESS = DO_SHO_PDF:P1_FNAME:test.pdf "> test.pdf < / a > < / object >"

  Anonymous application, pl/sql block: DO_SHO_PDF

  DECLARE
     l_blob    BLOB;
     l_bfile   BFILE;
  BEGIN
     DBMS_LOB.createtemporary (l_blob, TRUE, DBMS_LOB.SESSION);
     --l_bfile := BFILENAME ('MY_DIR', 'test.pdf');
     l_bfile := BFILENAME ('MY_DIR', v('P1_FNAME'));
     DBMS_LOB.fileopen (l_bfile);
     DBMS_LOB.loadfromfile (l_blob, l_bfile, DBMS_LOB.getlength (l_bfile));
     DBMS_LOB.fileclose (l_bfile);
     OWA_UTIL.mime_header ('application/pdf', FALSE);
     HTP.p ('Content-length: ' || DBMS_LOB.getlength (l_blob));
     OWA_UTIL.http_header_close;
     WPG_DOCLOAD.download_file (l_blob);
  EXCEPTION
     WHEN NO_DATA_FOUND
     THEN
        NULL;
  END;
  

  The file download is similar:
  HTP.p (' download the bin file < a href = "f?) p ='|| v ('APP_ID') | » : 20 :'|| v ('SESSION'): ': APPLICATION_PROCESS = DOWNLOAD_FILE:P20_BINFILE :'|| v ('P20_BINFILE'). ("" "> Download < / a > ');

  Anonymous application, pl/sql block: DOWNLOAD_FILE

  pkg_name. SAVE_FILE;

  -- snippet of pkg
     PROCEDURE save_file is
         l_blob    BLOB;
         l_bfile   BFILE;
      BEGIN
           DBMS_LOB.createtemporary (l_blob, TRUE, DBMS_LOB.SESSION);
           l_bfile := BFILENAME (g_tmp_dir, v('P20_BINFILE'));
           DBMS_LOB.fileopen (l_bfile);
           DBMS_LOB.loadfromfile (l_blob, l_bfile, DBMS_LOB.getlength (l_bfile));
           DBMS_LOB.fileclose (l_bfile);
           owa_util.mime_header('application/octet', False);
           HTP.p ('Content-length: ' || DBMS_LOB.getlength (l_blob));
           htp.p('Content-Disposition: attachment; filename="'||v('P20_DISPLAYNAME')||'"');
           OWA_UTIL.http_header_close;
           WPG_DOCLOAD.download_file (l_blob);
      exception
        when others then htp.p(SQLERRM);
      END;
  

  Published by: maceyah on March 9, 2012 15:03

• Reformat a fron of system XP 2002. almost finished, but can not get windpow update or IE8 for the 404 error, invalid file or dir?

  Have a memory of 512mg Dell DM051, Win.XP, Media EditionSP2, 3.99gz by car.

  Started to run so slow I couldn't stand, 1/2 hours of operation, and I have to restart.  Tried several tips, no change, decided to re-formatt without being able to back up my drivers/utils.  Now, almost everything I touch needs to be revised to tours / modern, cannot get Windows update in to pick what suits him! Help!

  I am pleased to have been of assistance.

  Tricky

• Scan of a file only works on the first line

  Hello

  I'm new to Labview (see 8.6) and I'm running on this problem.

  I use the Scan of a file to get a certain amount of information for the installation of test.txt.  The data of the file looks like this:

  AAA 1

  BBB 2

  REC 3

  I noticed that the Scan of the file works for only the first line.  Trying to get data that are not in the first line results in an error 85.

  Any ideas? Thank you

  

  It's all in what the scan of the file reads, and what is the next cgaracter in the file.

  Your first analysis of the file reads up to but NOT including the first newline in the file.

  The second read readings where the first reading was arrested and is expected to see 'B' as the next character, but sees the new line instead, and if the analysis fails. You must specify second reading formatted to await the return line.

  You can do this by making the FIRST character of the format string space, that will tell it to expect a number any of charaters 'white space '.

  Yo can indeed put a space at the beginning of the format string in your first analysis of the file and it will match with zero white space characters before you see the AAA. By doing this he also tolerate to see the spaces and tabs before your AAA or BBB identifiers.

  Rod.

• How to restore the documents now say "error reading file"?

  I have a certain recorded documents I can't view... They are still there, but when I try to view them I always get the message "error reading file" many of them are imprtant to me and Iunfortunately cannot replace them. Even when I find out my back up, I still cannot get them.

  Help!

  Hello

  1. what documents do you speak?

  2. were you able to view these files before?

  3. don't you make recent changes?

  I suggest you try to restore the computer to an earlier point and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  It will be useful.

• Error - backup file is not found or is not the file you requested.

  Original title: restoration of Windows XP utility gives "file not found error.

  Hello
  I have Windows XP SP3 on my system. I tried to restore my backup file I had created a few months back. and I get the following error:
  "Backup file is not found or is not the file you requested.
  even though I am pointing to the correct file.

  It is possible (although I'm not sure) can I have left my backup file a different location for a more current. However, in the Restore Wizard, I'm still that it points to the current file.

  I followed the instructions of Dena in the following post:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/cannot-restore-files-from-computer-backup-on/4c3ac6eb-c8f5-4DB9-BA56-e158e057f828

  However, it does not help. When I try to catalog them by following the steps, an hourglass appears, but there is no algorithmic activity event. So if I move my mouse even slightly, the hourglass disappears and is replaced by the pointer. Then when I try to work with the backup file, I get the same error as above.

  Please help me with this restoration! There is a huge amount of data which suddenly went 'pfoosh' one morning. people say we should have backups for buffering against these events, but a pity that my backup doesn't even work! Help, please! I would really appreciate it.

  Thank you

  Hello

  ·         You receive a specific error with the error code: "the backup file is not found or is not the file you requested"?

  ·         Is the backup stored locally or on an external drive?

  You try to run chkdsk on the drive that contains the backup. Later, check to see if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• Error: "file beam (Alarm.bar) was rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in the bundle of original file. »

  I am trying to submit a new version of my application "awakening."

  I'm on "Presentation of new Release" screen and when I click on the pencil under the column "Files" icon and select my new BAR file, I get the following error:

  File bundle (Alarm.bar) was rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in the bundle of original file.

  Because of this error, I am unable to submit new versions of the application.

  This error occurs generally if you:

  n ' have not increased the number of output

  -try to connect with the new signing keys

• Error copying file or folder: cannot read the source file or disk.

  My problem occurs when you try to copy on the same computer I am on (or to a remote drive).  I get one of these messages in the dialog "error copying file or folder.

  box:

  Impossible to copy 'Filename': data error (cyclic redundancy check).
  Impossible to copy 'Filename': cannot read the source file or disk.

  Hey Norton victim,
  
  (a) what is your operating system?
  (b) what program file you are not able to copy?
  
  As the files are copied, Windows verifies that the data that has been copied are the same as the source files. The cyclic redundancy check (CRC) error occurs when the copied data does not match the original.
   
  This could be down to a mistake of the DVD, the disc goes wrong and has failed to 'read' the file properly or the file was placed on a bad sector on your hard drive. (Could be just down to a scratch or some marks on the dvd, maybe clean it if necessary and try again).
   
  I would run a check disk (CHKDSK) against the drive to rule that, although lacking - you have another dvd player to try the disc again? If so, try the dvd in another drive, or even a completely different machine to try to pin-point the problem.
   
  At the command prompt, type the following command and press ENTER:
   
  Chkdsk /r
   
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.
  
  FOR INFO:
   
  Data error (cyclic redundancy check)"Error Message When Outlook downloads E-mail
  http://support.Microsoft.com/kb/319128
   
  Aziz Nadeem - Microsoft Support

• Almost every time that I do a right-click to display a menu to do something such as delete or copy, the following error message appears: program internal error:.\Src\IntegrationToolsHolder.cpp,21

  Original title: internal program Errror

  I use XP Professional 32-bit.

  Almost every time that I do a right-click to display a menu of something for example delete or copy, you receive the following error message.

  Program internal error:.\Src\IntegrationToolsHolder.cpp,21

  If I click OK on the error message, it goes & I can then right click New & the appropriate menu appears and works correctly.

  Any ideas, please, as to what is the cause?

  Kind regards

  I told you I want to talk to you soon as you try these things.

  How to boot in Safe Mode and Clean worked for you?  Not at all useful?

  You said about this 2 weeks ago?

  Yet once, I fell in this place and the time and effort wasted because MS Answers forums invite to no system information when a new question is asked - but I digress.

  Update of security 908513 is included in Service Pack 3 update.

  Since forums MS Answers asks you any information from system when a new question is asked, we don't even know what Service Pack you have.  If you have SP3, you already have the update.  Two weeks and we don't know what is your Service Pack, what is your antivirus/antimalware environment...  We know that you have XP Pro 32-bit however.

  What you're likely to have is an extension of the Explorer Shell with a malfunction, and you can usually understand as follows:

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  If you can really achieve almost everytime you do a right-click and choose something like delete or copy, you're well on your way to understand.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success about the errors with the extension and to what other people have done on it... Maybe just to get an update of the program that adds the suspicious extension.

  You can Google something like:

  Explorer XP crashing

  (you must complete your suspect on behalf of add on)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the extensions one at a time non-Microsoft keep a list so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately turned off, to disable an extension does not require a restart, but if you find the problem, I reboot and retest in all cases to be sure that the problem has disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

• I have a new Apple and made a Migration of Applications. data etc old Apple Apple again. Creative cloud gives error re damaged and to download and install again, however, after doing this installation starts but keeps giving the same error re C

  I have a new Apple and made a Migration of Applications. data etc old Apple Apple again. Creative cloud gives error re damaged and to download and install again, however, after doing this installation starts but keeps giving the same error re file creative cloud. How to solve?

  Uninstall, use the CS cleaning tool, and then reinstall.

  Adobe Creative Suite Cleaner Tool allows to solve the problems of installation for CS3 thru CS6 and creative cloud

  http://www.Adobe.com/support/contact/cscleanertool.html

• media player does not open. Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Itried the benchmark tool, it did not help. I tried the scanning from the prompt, it says that some files were corrupted and could not repair them. There is no error message at all

  Maybe the info will offer something that you haven't tried:

  First, launch... Task Manager...

  How to launch the Task Manager instantly in Windows XP or Vista?
  http://www.XP-Vista.com/tipstricks/how-to-launch-the-Task-Manager-instantly-in-Windows-XP-or-Vista

  The Task Manager / processes tab select (highlight) any which instance of:
  "wmplayer.exe" and left click on the button "complete the process".

  If you see a dialog box 'Warning'... left click Yes.

  Close the Task Manager.

  Try Windows Media Player again.

  And... the following links may be worth a visit:

  (925704) when I try to use Windows Media Player 11, the program
  does not start, or some user interface elements are empty
  http://support.Microsoft.com/kb/925704

  Please see the following article for info on opening a high command
  Prompt in Vista

  Windows Vista - command prompt: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/command-prompt-frequently-asked-questions
  (scroll down to: how to run a command with elevated privileges?)

  Good luck...

• How to defragment the drive d error: some files on this volume could not be defragmented. Please see the report for a list of these files defragmentation.

  Original title: how to defragment the d drive

  Defragmentation is complete for: (c :)) some files on this volume could not be defragmented. Please see the report for a list of these files defragmentation.   I solve this problem with pagedefrag but same problem with the D: drive. What can I do? is a D: disk defragmentation program at system startup? Please help me :(

  Its a simple but problem ongoing with the pagefile... The hd is in use & cannot defragment parts of it

  because of this, use to defrag times. To fix the files fragmented on any hard drive, open the system

  Properties, performance, advance, the page file, change the button, select the hd, press "no paging file" value

  Enter 2 X, close, restart the pc. Once in xp, open cmd, type: CLEANMGR then select the hd,

  type: Defrag D: D: being fragmented, once through, hd output cmd, return to system properties, set

  the swap file for hd to "let the system manage", click 2 x game, close, you get a couple of windows

  saying: 'replace the file' say Yes close... Sometimes you have to try several, but you will succeed...