Defragmenter - When I defragment, he says, "navigation cancelled".

Similar Questions

• Defragmentation runs of himself when he isn't scheuled. He begins to scan the C drive when he wants and won't run a defragmentation when I click on defrag now.

  Original title: the tool Defrag

  Defragmentation runs of himself when he isn't scheuled. He begins to scan the C drive when he wants and won't run a defragmentation when I click on defrag now.

  I put it on a timed m.o. and it ran for about two seconds and said that it is complete.

  Hello fossil man,.

  You have a set schedule in place to defragment at certain times?  If you do, go to the Planner and that cancel out.  Then see if you are able to reproduce this problem.

  Schedule disk defragmentation:

  http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-Disk-Defragmenter-to-run-regularly

  Please let us know status.

• When I defragment I get message "suspended for the shadow copy of volume.

  Original title: Defrag problem

  When I defragment I get message 'suspended for the shadow copy of volume' whatever that means?

  The VSS Service should not be run unless you do some kind of a backup that uses it.

  Are you using any kind of third-party backup software that would force the VSS Service to run all the time?

  If defrag used to work, what do you think might have changed since the last time it worked correctly?

  I have my VSS Service set to "Manual" - in this way, it not start with XP on a restart and run all day to do nothing, but he will start by itself when I do a backup and stop when the backup is complete (it runs when you need).

  You check the VSS Service, click Start, run and enter in the box:

  services.msc

  Click OK to open the Services applet and find the Volume Shadow Copy Service.

  Select the status and Startup Type columns.

  If you do not have a backup at this time there, the Status column must be empty (not started) and the Startup Type should be set to manual.

  If this is not the case, let a right-click on the VSS Service, properties, Stop (to stop it), change the Startup Type to manual and OK your way out (ensure that it is reactivated by itself).  If it starts up again without a valid reason, you need to understand why and fix it.  Restart to make sure the changes 'stick '.

  See if your defragmentation works when the VSS Service does not work...

• Impossible to open the defragmentation, get error Defrag - mmc.exe - bad image

  Could not open the Defragmenter - error message: Defrag - mmc.exe - bad image. "The application or DLL C:\Windows\System32\mmcbase.dll is not a valid Windows image. Please check this against your installation diskette. »

  Hi ELCC.

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. do you have security software installed on the computer?

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• How can I see the cluster move in Disk Defragmenter, when I run the program

  How can I see the clusters move in Disk Defragmenter when I run on my old computer I could see and my step dad had told me that anyone who has a computer can display when they run this program

  Due to popular demand, is no longer a part of Disk Defrag in Vista.

  Disk Defrag in Visa works quietly in the background.

  People complained the old Disk Defrag in XP style interface, as they had to do on her computer, not to watch the little squares moving.

  You can use 3rd party defragmentation products:

  http://www.SnapFiles.com/reviews/Auslogics-Disk-Defrag/adiskdefrag.html

  http://www.SnapFiles.com/reviews/IObit-SmartDefrag/iobitsmartdefrag.html

  http://www.SnapFiles.com/reviews/Diskeeper_Home/Diskeeper.html

  See you soon.

  Mick Murphy - Microsoft partner

• In the latest Version of FireFox 9 Page Starup of Mozilla Firefox, pls which is the default home page no longer works, when you click it says invalid link, look at this and fix it...

  In the latest Version of FireFox 9 Page Starup of Mozilla Firefox, pls which is the default home page no longer works, when you click it says invalid link, look at this and fix it...

  Can be caused by a corrupt installation of Visual C++ (several versions can be installed-by-side; SxS) it lacks certain runtime components (Redistributable Package).

  See:

  • [908165/questions/908165] The URL is not valid and cannot be loaded

• I try to play a game online game and when it loads it says that the firewall is bloacking it helped me

  I try to play a game online game and when it loads it says that the firewall is bloacking it helped me

  Hello
  You can turn your firewall on and outside:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  hope this helps,
  B Eddie

• When I defragment my system it only only only 17%

  WHEN I DEFRAGMENT MY SYSTEM IT ONLY 17% THEN STOPS HOW CAN I SOLVE THIS PROBLEM. THE OPERATING SYSTEM IS WINDOWS XP 2000

  How does this relate to the features of Windows Update?

• IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot op.

  IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot open the device because the configuration (in the registry) is incomplete or damaged". This a recent phenomenon. I reloaded the latest Camerawindow software nothing works. Recommendations to solve this problem?

  Problem solved. Recommendations by e-mail has helped. I had to use 'Device Manager' from the Vista Control Panel for adding new hardware. I also need to add a new driver. The Kodak in Windows Vista camera driver worked. The camera is now recognized. Thanks for the help.

• We have made no changes to our computer that runs windows XP suddenly when we start it says that we have 3 days to activate windows again.

  We have made no changes to our computer that runs windows XP suddenly when we start it says we have 3 days to re-activate windows because of major changes to the system.  We have not changed.  What's the deal, our copy is valid and has been for years.

  How our copy of windows valid suddenly become invalid?
  Is it possible that some programs of virus/spy stole our code systems disconnected from our system to make our windows inactivated?  I didn't know how it would be possible, just try to guess.  What should we do? reactivate? Call and have our system enabled somehow?

  Could be a Windows update that caused the problem, try to activate the phone.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the letters and numbers (number 8 for the)
  Letter B, etc.).

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Users of Windows XP - Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• When I start it says it can't find hotkeys.sys

  Original title: keyboard shortcuts

  When I start it says it can't find hotkeys.sys

  Someone at - it an idea how I can help it find it.  I tried searching and help.

  Hi Alan RT,.

  ·         You did changes to the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check if the problem persists.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.

• I can't open my camera of withdrawal because it asks to format when inserted, but when format us windows says it can't complete the format

  I can't open my camera of withdrawal because it asks to format when inserted, but when format us windows says it can't complete the format

  This problem is usually caused by

  1. problem with the connecting cable
  2. the problem with USB port
  3. problem with the device itself.
  I suggest you try changing ports and cable. If this does not work, the problem is with the device only.
  In addition, note that the option to remove is not necessary to be used if you use Windows XP or a higher version of Windows and the device has an indicator of activity.
  
  As you can see, most USB storage devices are configured for the fast-moving, which means, no need to use the option remove safely. If you are sure of a use, for example, a file transfer operation is complete, you can remove the device directly.

• I'm trying to download the media feature pack for windows 7n and it tell me to validate using GenuineCheck, but when I do it says that I should download the most recent version uses 64-bit window 7n

  I'm trying to download the media feature pack for windows 7n and it tell me to validate using GenuineCheck, but when I do it says that I should download the most recent version uses 64-bit window 7n

  You must use internet explore 32 bit.

• I need to re - install CS5 after having my hard drive has changed. But when I try it says ' serial number [removed] is valid but the product was not found on this computer HELP!

  I need to re - install CS5 after having my hard drive has changed. But when I try it says ' serial number [removed by Mod] is valid but the product was not found on this calculation? Help!

  More information about this error is also available onhttp://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html who can refer you to contact support if necessary.

  Concerning

  Stéphane

• SQLdeveloper said when at the beginning of navigation in C:\Program Files\Java\jre8\bin: "cannot find a Java SDK SE to the path C:\Program Files\Java\jre8\bin.

  SQLdeveloper said when at the beginning of navigation in C:\Program Files\Java\jre8\bin: "cannot find a Java SDK SE to the path C:\Program Files\Java\jre8\bin.

  Runs as an administrator.

  I'm administrator of my PC with Windows 7 64 bit.

  Installed the Java jdk-8u11-windows - x 64 .exe.

  You're VERY close - just remove the part "\bin".