Delay in starting from

Similar Questions

• I replaced my original Apple Watch with a watch of S2. When I install and associate the new shows, is there a way I can restore all applications, configuration information and data of the original of the new shows so I don't have to start from scratch?

  I replaced my original Apple Watch with a watch of S2. When I install and associate the new watch and my iPhone 7 more, is there any way I can restore all applications, configuration info and data between the original and the new shows, so I don't have to start from scratch?

  Try this procedure

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Spend your Apple Watch a new iPhone - Apple Support

• Y at - it an indicator to show how much my mac started from?

  I just cloned my internal hard drive, so I should have 2 bootable volumes now.  I went to test (to ensure that the cloned disk works and is able to start properly my iMac).  I restarted the iMac using the down option. I chose the clone of startup, but now I can not tell how much actually started.

  I mean, if my cloned drive did not work, my iMac would automatically go to the next to start from option (which would be my original internal drive), and I don't know the difference.

  Y at - it a flag somewhere showing me my iMac is running the operating system out of the volume?  I just want to be sure that my cloned drive works before you make changes to the internal drive...

  I use OS x Lion 10.7.5 on an iMac of mid-2011.

  Launch the Terminal (Launchpad: other: Terminal).

  Type the following text in blue to get the boot drive (where both are Macintosh HD).

  bless $- info - getboot

  / dev/disk0s2

  Otherwise, Apple Logo: about this Mac: boot disk

• Sometimes during random playback of music, next song starts from the Middle

  This has happened for about 2-3 months now. It is usually a rare event. Maybe its just me, but I feel that slowly becomes more frequent...

  In any case what happens is, while I'm listening to my iphone the shuffle, it starts the next song as usual, but sometimes this song will start from the middle. It's weird. It also happens when im jumping songs manually.

  -A.L.

  Start with the basic troubleshooting steps.

  First, try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

  If this does not help, you may need to restore your iPhone.

  https://support.Apple.com/en-us/HT204184

• notifications are not correctly rejected when several downloads are started from priv├⌐s.

  When a download is started from a private tab notification is automatically rejected at the end.
  If several downloads are active, it won't.
  notification by the full download will show the status and the name of the current download, while the notification belonging originally to the current download will keep displaying the % the current download had when you have finished uploading else.

  Thanks for the report! I filed a bug in Bugzilla to track this issue.

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=921776

• Cannot start from the CD in my Satellite P300-23F

  Hello

  I'm trying to fix the old laptop from my brother. It's a Toshiba satellite p300-23f. The laptop did not work well, so he bought another. I think he might have a problem with the HARD drive, but I'm not sure about this and want to try to format the HARD drive and reinstall the operating system.

  When I start from the disc HARD I have no problem, insiders of OS normally, and I can 'use' laptop. The problem is when I try to boot from the OS CD. I get this message "Media test failure, check cable". I know the CD works, because recently I have instaled the operating system with this CD on another computer. I know that the CD player (not sure if it is called like this, but I think you understand what I mean) also works very well, because I tried different CD and it worked.

  I've tried pressing F12 and boot from CD it and also tried to change the BIOS and put the CD in the first place, but it does not work.

  No idea what's going on? Is it possible to make it work?

  Stand by.
  When Windows is completely loaded, you can use the optical disk drive and it reads all CDs and DVDs?
  When you put your Windows Windows installation disc can see the contents of the disc in Windows Explorer?

  Maybe you can use the CD but not DVD. check it out please.

• I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  Sorry, but you can't activate an iPhone without a SIM card installed. It is simply not possible to do.

• Error code 5 when starting from CD/DVD - Equium A200

  I am trying to boot from the CD/DVD and get the message: cannot start from the CD - Code 5
  With the help of a cd of Windows Vista startup family.
  The CD/DVD-station is ok. Have you tried another station.
  Have also tried another HARD drive.

  Sorry, but we can't discuss on this path.
  Can you please tell us what model of laptop do you have?
  When this error pops up?
  Are you using the original Toshiba Recovery disk?

  Have you tried to start and test the functionality with different bootable disks?

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

• Portege R100 - does not start from CD player

  I have Toshiba Portege R100. I want to format and start all over again

  I use killdisk, excellent utility program, normally takes place the disc cd but the machine does not start from cd player, even when it is said in the bios, it says 'error of cable' & drive still works fine when the system is installed & running

  I want to remove unbuntu & just xp, thought that I would start plus-plus easy or simply to remove unbuntu?
  If remove unbuntu, how can I do this?

  Best regards, TIM

  Hey Buddy,

  If you want to have XP only, try to boot from a XP disc. You can format the drive HARD whole with XP disc that even Ubuntu is installed. I put t understand why you use another program to format the HARD drive

  Then boot from a XP disc and follow the instructions on the screen. If it doesn't work, it seems to be the material of your player to malfunction.

• Can satellite U500-10V - I start from a SD card?

  Hope someone could help me with this problem.

  I have updated the BIOS to the latest version and still cannot boot from SD
  Unable to boot from the SD model?

  Thank you.

  Hello

  (1.) I put t know what to say! Who said that the Satellite U500 can start on SD or SDHC card?

  2.) check your user manual!
  You can start from the following devices:
  Hard drive
  CD/DVD drive
  USB floppy drive
  Network (LAN)
  As far as I know e-SATA too

  But I can t find all information on starting Flash Media

• HD will not start from host organization but will be of a different MBP

  ((Two Mbit/s: 1) mid 2010 i5 model 1) Middle model i7 2011.

  From here, I will call them as "i5 and i7.

  The i7 was having starting problems. The taskbar would charge about 2/3 of the way in which it would "hang up" then the screen turns off. Unsuccessfully trying to boot in safe mode. Verbose mode would freeze as well. Tried the single user mode and run ' fsck - fy "and it made no difference. No idea how fix permissions with the utility El Capitan disk but I'm not sure it would make a difference. Doesn't it?

  I then did a backup/clone of the i7 to a new external storage disk. All programs and files are successfully transferred.

  Then I wiped the i7 with a clear three-pass and reinstalled OSX.

  Error #1) I have not test to see if the hd now Virgin began its host computer before you restore the old files.

  Error #2) I put the clone on the i7 copy using Super Duper.

  When installing the i7 to its host computer, it wouldn't boot in any mode just as before.

  * Comment: The i7 will start the i5 laptop when connected via USB in system preferences > startup disk.

  I am currently using the i7 connected to the external i5 as I type this.

  Disk utility has been run on the i7 at this point by indicating zero problems.

  Onyx has been run through all the options and check marks with no problems.

  Always the i7 will not start its host computer.

  I am very confused.

  Issues related to the:

  (1) why/how this phenomenon occur?

  (2) in making the i7 clone for external storage, if there was a hidden virus or something on the i7 origin, is the now compromised storage device?

  I read it twice and I'm still a little confused.

  When you cloned the i7, you do it from the other computer?

  I get the i7 disc starts from the i7 computer when it is connected to the outside. Is this correct?

  If the player starts in an external of the i7 box, but not in the computer the case most likely is the SATA cable to the hard drive.

  Try to replace.

  Kim

• Incompatible VISA read starting from 3458

  See the attached screenshots. My goal is to capture 4000 datapoints to a ramp of output voltage of 0 to 5v, with 3458A in LEVEL triggered 1v level, starting from the SALT ON signal that allows the output of the unit. I confirmed all signals are OK with a scope, but I can't get the 3458 to SYSTEMATICALLY capture the waveform. Whenever I run the screw, I get random numbers of datapoints varying between 5 and 4000 desired. Why can not always get my 4000 datapoints? In the screenshots below, the TrigELoadramp, vi immediately following the Setup3458.vi. In vi of this last paragraph is copied from the driver notes Agilent 3458 A, which makes no sense to me.

  

  Use a property on the VISA reference node.  Property, you need to define is the Message-based settings-> allow termination character.

• Scan a multi-page document starting from the plateau of HP Officejet Pro 8600?

  Before Windows/7, which I use in 64-bit mode, we had Solution Center HP, which has supported the scanning multipage documents starting from the tray (e.g., scanning several pages of a document linked (for example, a book)) in a single PDF multipage doc.  HPSC has apparently been replaced by HP Scan, et al.  I have a new HP OfficeJet Pro 8600, and there seems to be NO WAY to SCAN SEVERAL PAGES OF A BOOK IN A SINGLE PDF DOCUMENT of several PAGES.  Help me to solve this problem or give me HP Solution Center.

  Thank you

  Jim

  No problem at all. It's understanbable. If you encounter other problems, feel free to ask.

• Cannot start from 2nd default player

  My problem: can not start from second default drive

  I have a HP Pavilion dv7 1451NR, product NV204UA #ABA number.

  I have two drives installed.

  I have Windows 7 64 bit is installed on disk 0 and Ubuntu 32-bit installed on disk 1.

  I can boot both operating systems successfully by following these steps:

  1. Turning the power on

  2. Press the ESC key for BIOS

  3. Press F9-go to the start menu

  4. Menu of startup watch two disks named "internal hard drive.

  5. If I select the first entry named "Internal hard drive" I start to Windows 7.

  6. If I choose the 2nd entry named "Internal hard drive" I boot to Ubuntu.

  I turn on if I do NOT press escape, the machine boots to Windows after the timeout.

  My problem: I want to start on default Ubuntu.

  I checked the HP bios and I do not think there is a way to do it by changing the boot priority in the BIOS. The BIOS does not seem to tell the difference between the two drives. I have only has an entry for "internal hard drive.

  In my view, is an approach that should work:

  1. Use bcdedit or easybcd to create a BCD record that points to GRUB.

  2. Create a configuration file GRUB that 'the chain' charges Ubuntu.

  3. Use bcdedit to put the GRUB entry as the default value.

  I tried various permutations but cannot make it work.

  Question: Should my idea work?

  Detailed question: How to find out where the original boot image is for GRUB? I know I need the copy of sector 0 of the drive and the partition Ubuntu and GRUB on. Since Ubuntu I tried permutations of ' dd if of=/NST/grubsdXX.bin = / dev/sdxx bs = 512 count = 1 "to generate the boot image. Not worked.

  Detailed question: What exactly should the BCD record look like? What commands are used to create it. I tried various permutations of

  ' bcdedit / create /d "GRUB" / application of the BOOT sector.

  bcdedit/set {60e1c218-a9b3-11e0-89b8-00235abb6d44} device partition = C:

  bcdedit/set {60e1c218-a9b3-11e0-89b8-00235abb6d44} path \nst\grubsdXX.bin

  bcdedit displayorder {60e1c218-a9b3-11e0-89b8-00235abb6d44} /addlast»

  I think I'm close, but can't make it work. My guess is I do not get the image of the right sector 0 in grubsdXX.bin or I am not the "partition" or the path correctly, or maybe I need to install GRUB on disk 0.

  Any help would be appreciated. Thanks in advance.

  Refinement: I discovered how to avoid having to change the menu item, whenever you update the Ubuntu kernel. When it is updated Ubuntu creates a link in the root of the root partition that points to the latest kernel and one that points the last initrd. So if you replace the reference to a specific core (example: boot/vmlinuz-3.2.0-48-gereic-pae) and initrd (example: boot/initrd.img-3.2.0-48-generic-pae) with "/ vmlinuz" and "/ initrd.img. Your menu will always be able to start the last installed Ubuntu.