HD will not start from host organization but will be of a different MBP

Similar Questions

• CD player passes all tests but the computer does not start from cd player

  CD player passes all the tests, but the computer does not start from cd drive. entered the bios and it specifically indicate to boot from the cd drive. Windows 7 installation disc does not start. Win 7 disk works in another computer to start. Why is it not this cd player read the disc and from the win 7 installation process?

  I see this problem on systems having older IDE and SATA drives requiring firmware updates and assigned to the region 1 aka they boot from XP CD, but not DVD windows 7or media.

• My C50 - B Satellite does not start from the HARD drive

  Details of the machine: -.

  Model number: PSCMLA-03F07Q
  Serial number: XE343127P

  Computer does not start from hard drive. No error message, just the start Toshiba at the end of self-test screen.

  Sometimes a reinstall of the operating system seems to correct the problem, but then he would go again, now the problem is consistent.

  I reduced the possibilities to a fault of BIOS, reasons.

  System boots from USB with no problems. Installation of operating systems is done without error. SMART hard drive data indicates a perfectly healthy hard drive. Memcheck will return no error.

  The obvious solution is to reload the BIOS, just reset it doesn't help. But that is the problem.

  1.4 BIOS update that the Australian site offers is a Windows program and the computer cannot start Windows.

  Obvious answer is to use a bootable USB key with an operating system 'live' on this issue, but all of these systems are Linux and the update of the BIOS is a Windows program. So much for smart solutions.

  Downloaded Bios version 1.7 of the European site but the iso inside the rar file is empty, 25 MB in size but nothing in there according to Linux. Tried to run his program on a Win7 64 bit computer and it returns an error that it could not find the correct iso file.

  I submitted a support request by email to Toshiba, but they believe that it could take three days to get a response, so I thought I would ask here as well. Can someone tell me please to a working copy of the latest BIOS update disk for a laptop Satelite C50 - B? Note: this model does not have a CD player so iso should be compatible with USB boot.

  See you soon,.

  Andrew.

  Hello

  From my experience that I n think that BIOS update is the final solution for you. When you set the default settings of the BIOS disk HARD appears correctly in the BIOS settings?
  HARD drive is also offered and listed as boot device when you enter in the start using F12 at startup menu?

  What happens when you start using recovery image installation created recovery USB key (I hope that you have created a)?

  Offer BIOS updates are versions of WIN and can be performed by running the Windows operating system.

• Portege R100 - does not start from CD player

  I have Toshiba Portege R100. I want to format and start all over again

  I use killdisk, excellent utility program, normally takes place the disc cd but the machine does not start from cd player, even when it is said in the bios, it says 'error of cable' & drive still works fine when the system is installed & running

  I want to remove unbuntu & just xp, thought that I would start plus-plus easy or simply to remove unbuntu?
  If remove unbuntu, how can I do this?

  Best regards, TIM

  Hey Buddy,

  If you want to have XP only, try to boot from a XP disc. You can format the drive HARD whole with XP disc that even Ubuntu is installed. I put t understand why you use another program to format the HARD drive

  Then boot from a XP disc and follow the instructions on the screen. If it doesn't work, it seems to be the material of your player to malfunction.

• most programs now get error message "could not start from this location after a mail there is session 2 nite".

  After a session 2 nites E-mail there, many programs said message error "could not start program from this location. In addition, long delays after you clicked on a link, a large display hourglass for up to several minutes. Have tried to rebuild, but I think that the problem is still there. Any suggestions?

  What is a "mail session?

  What is, "have tried to rebuild?"

  Edition with Service Pack of Windows XP _ _?

  What anti-virus application that you use, and if she slept in day?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Satellite L300D - 12L does not start from CD/DVD drive

  Hello.

  I noticed a couple of threads on L3x who sometimes won't start but have a blinking cursor.
  I also have this problem with my daughter satellite.

  It occurs when there is a disc in the DVD player. The PC does not start, I get a black screen with a cursor and the DVD flashes regularly as if she is trying to determine if there is a bootable disc inserted.

  I tried several discs with similar results.
  Everything that happens the DVDRW ejects, and I have to force a shutdown, then eject the disc immediately when I start her for it boot on Vista.

  Any ideas greatly appreciated.

  Hello

  Have you tried to boot from the recovery disk Toshiba?

  Fact is if you try to install the Windows operating system on the new laptop series, you must install either the drivers SATA or you must set compatible SATA to AHCI mode in the BIOS!

  That's why check first before you would contact any ASP guy to replace the STRANGE.

  See you soon

• VM does not start from CD/DVD

  Hello

  I just finished installing Hyper-V on my windows server 2012 and I created my first VM. I try to install the operating system of the CD/DVD drive, but it does not start. It displays "Boot Failure. Restart from a proper boot device... ».

  I tried setting up another server in the same way and the virtual machine on the other server also shows the same error.

  I have the CD as first option in the BIOS to boot. I have only one CD drive on my server that I put my VM to start stand with.

  So, what could be the problem?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Blue screen of death! Will not start at all. Every time, it's a different error.

  Several times, I get the BSOD. Whenever it happens that there are various STOP codes and errors. I haven't added a new hardware or software on this computer. Just performed an automatic update Micrdosoft and restarted on its own and the BSOD appeared. I rebooted several times and get the BSOD every time. I can't get the system to boot at all. He's coming to my office for about 30 seconds, then BSOD!  I tried starting my CD-ROM and using the last configuration that worked but I still get BSOD! Here are some of the things that I got:

  STOP: 0x0000008E (0xC0000005, 0xAE29D527, Ox00000000) SSMEVENT. SYS-address AE29D527 base at AE288000, time stamp 4f1DAD9c

  FltMgr.sys PAGE_FAULT_IN_NONPAGED_AREA B9E4CA23 base at B9E4C000 datestamp 480251da

  Still, whenever I restart I get all the new info! Help, please!

  Karen

  Hello

  See the following steps and check:

  Step 1:
  

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. System Restore helps you restore system files from your computer to an earlier point in time.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Note: Trying to back up all important data before you perform a custom or clean installation

  Step 2:

  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Note: Trying to back up all important data before you perform a custom or clean installation

  Hope this information helps.

• Left without head does not start from the phone.

  Hello

  I have a problem with the part without a head.

  When I try to launch the app to Eclips, the app will be charged for phone and rotate the UI and parts without a head.

  Now if I restart the phone, headless part does not start even when I open the UI part,

  The headless part is to call the block function.

  Any idea will be very appreciated!

  Thank you!

  Your HL will start automatically in these two scenarios:
  (1) the application is installed on the device (there is no front)
  (2) the phone is restarted-> which is the magical part where your file bar - descriptor.xml is to record your target without head to call when the OS up bb.action.system.STARTED action.

  If you want your HL to be launched at the start of the user interface, you must manually call.

  Look here for an example of coding:
  https://github.com/RodgerLeblanc/HeadlessLight/BLOB/master/HeadlessLight/src/applicationui.cpp#L34-L...

• WIndows 8.1 does not start from the HARD drive

  Put a new WD HDD in a Samsung laptop. Install windows 8.1 form DVD and restart get an error "tried all options press F4 to start recovery.

  He wants to boot from the DVD, but I have the HARD drive as the number of boot option in the bios. What's new?

  The symptoms you describe seem to indicate that the startup information has been lost of the HD.  The HD is faulty or something destroys the startup information.

  Try to do a repair from the installation DVD.

• Organizing element does not start from the 12 EP welcome screen

  Organizing element refuses to boot from the first item welcome screen 12. I had the same problem with PSE12, which was solved by systematically starting from the taskbar. I failed to get the screen of welcome to PSE12. Ss12 and PSE12 parpadean normally also. I could produce a film without difficulty. Pluggable 8.1 Windows on an ACER Aspire 8920 32-bit with 4 GB of memory. Although having as bought PSE12 and ss12 together I only install ss12. Plug-in these Adobe products for several years.

  My catalogs are all in C:\Users\All Users\Adobe\Elements Organizer\Catalogs.

  Drag-VId

  A few considerations...

  1. How did you get your 12 elements Photoshop and first screens welcome of the 12 elements that set up

  First elements welcome screen

  

  2. If you open first elements 12 to the Expert workspace and click the Organizer tab at the bottom of the workspace Expert, can you open the workspace elements Organizer 12 from there? If you add multimedia/Organizer items, it works?

  3 have you tried to delete the elements Organizer 12 parameters to remedy any malfunction of the elements Organizer?

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  Elements Organizer

  12.0

  Organizer

  and in the record of the Organizer is the file psa.prf that you remove or disable. Folder Option show hidden files, folders and disks should be used to see the full path.

  Please review and then let us know of your progress.

  Thank you.

  RTA

• VM does not start from 95%

  I have a Windows Server 2003 VM, I had running in VMware Server 1.0 for the past year or so on one of my servers.  I'm trying to move it to a new physical machine with VM Server 2.0, but I have questions.

  It does not start the VM spent '95% ' started.  Y at - it some part that I could look at for more information, logs, etc., about what it does?  Is this a problem that someone else had?

  Please take a look in the following thread:

  http://communities.VMware.com//thread/171066?TSTART=135

  Several people have this problem and there is no one in trouble for him.

• P7 - 1520t: PC does not start after a stop, but it will be after a reboot

  Since the last update March 1, my pc went all black screen and nothing happens, so I downgraded to its original condition with w8, with all fees have not kept what it is, I'm back on w10 and my problem remains the same, I can't start windows , not even with the recovery DVD or USB support. I have to remove all the power of my motherboard, so that I can boot and F1, I have install all the latest drivers available for all my components and remove all my material added always the same, if I restart without problems, but if I stop it when the CPU turns on, but windows will never load.

  Thank you in advance to those who can save me!

  P7 - 1520t - Intel i5-3330

  -16 GB of ram

  -64-bit W10

  -Integrated intel hd graphics

  H-Joshua-H61-Μatx (MB)

  I installed W8 if UEFI and everything worked well, have store 8.1 trough upgrade of windows, and I'm happy, all my stuff is working properly, is not going to install 10 tho... was good OS, but with all that is happening I will stay at 8.1, I put more money on fixing W10, they didn't even know what to do.

• Lately when I try to download a game, that it will not start using is selected but when save and run selected will be installed

  Lately when I try to download a game from a trusted site, it will not hold when EXECUTE is enabled but when SAVE & RUN is selected

  It will download. What I want to do something for my computer (I just downloaded explore 10 - who would have something to do with it)

  I am on Windows 7

  Hello

  Thank you for the information. Follow these methods.

  Method 1: Try to access the site in compatibility mode and check.

  (a) open Internet Explorer in view of the office.

  (b) click on Tools, internet options , then compatibility view.

  Method 2: Disable GPU rendering.

  (a) open Internet Explorer in view of the office.

  (b) click on Tools, internet options , then Advanced tab.

  (c) under Accelerated graphics , uncheck the option made software use instead of GPU rendering.

  (d) click on apply and ok.

  Method 3: Clear the data cache in Internet Explorer.

  (a) open Internet Explorer in view of the office.

  (b) click on Tools, internet options General tab.

  (c) under the browsing history area, click on delete.

  (d) delete cookies, history, and temporary internet files.

  (e) click on apply and ok.

  Method 4: Disable Add-ons.

  (a) open Internet Explorer in view of the office.

  (b) click on Tools, internet options and programs .

  (c) click Manage Add-ons and disable them. Click ok.

  Reference: Manage Add-ons in Internet Explorer

  Method 5: Reset the Internet Explorer settings. Follow these steps:

  (a) open Internet Explorer.

  (b) click on Tools, Internet Options.

  (c) click the Advanced tab.

  (d) click reset , and then click on apply and ok.

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• 5600: my 5600 printer will not print from my computer, but it will print a test page

  Hi I bought this printer new from 2016 Christmas e - bay.  But for some reason any I have no guarantee.  Everytime I try to use it there are problems.   So I rarely print anything.  Still, it prints pages test but never with one less word documents an hour for me to play with her or photos.

  I have a Dell Latitude 7 windows, 64 bit. I've done everything asked is why I get the test pages. Even disabled my firewalls.  He loses the connection to the network, but my wifi connection is 150. ??

  Can someone please tell me what to do, I can't afford a new printer now.  I have months of ink cartridges HP I've ever used

  Y at - it a cord that I can buy to do this.

  Thanks in advance for your help.

  HI, thanks for the response.

  A few reports have been generated automatically & they were incomplete, due to the questions - I then called Xfinity (Comcast) to see if they could help because my wifi router/modem is through them.

  He told me my DNS numbers were wrong & gave me their numbers, I had to hang up for an appointment.  Later that day, I changed the DNS numbers but it still does not.

  And for some strange reason, he would not save the old DNS numbers in the report.

  What I ended up doing was a complete uninstall & reinstall everything associated with the printer.  Despite recording only not all parameters (I wanted all the parameters to be entered automatically) the new DNS numbers were there & I couldn't get rid of them.

  So I did a restore to get rid of the Xfinity DNS numbers.

  "But instead of using my password I pressed a button on the modem Xfinity so he would automatically find the printer.

  Now, it works fine. "the next time or if I have another printer, it's the only step I'm taking.  He automatically added my password and I guess that numbers correct DNS.

  Thanks for the offer of help.  It's very appreciated.