Delay when opening the screen 'computer '.

Similar Questions

• When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  Hello

  Let us try these methods and check if that helps.

  Method 1.

  You can try the last good known Configuration and check if that helps.

  Using the last good known Configuration: http://windows.microsoft.com/en-in/windows7/using-last-known-good-configuration

  Method 2.

  You can use the restore points for Windows 7 to return to a previous state, when your computer was working properly.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• PAVILION 15: BLACK SCREEN WHEN OPENING THE LID ON WAKE UP

  THE LAP TOP SHOWS A BLACK SCREEN WHEN OPENING THE LID.

  THE SCREEN WORKS WELL WHEN PUT ON, BUT ON CLOSING THE LID FOR A WHILE AND RE OPENING STARTING THE ENGINE AND THE LIGHTS FLASH BUT THE SCREEN IS BLACK.

  TO RETRIEVE THE SCREEN POWER BUTTON MUST BE PUSHED AND WHEN FLASHING JUST AGAIN PUSHED THE SCREEN THEN WAKES UP.

  THIS FIRST STARTED WINDOWS 10 CHARGE BUT WHE I GO BACK TO THE FACTORY SETTINGS AND WHICH IS 8.1

  I TRIED TO REMOVE THE BATTERY TO RESET AND REMOVE AND REPLACE MEMORY CARDS AS SUGGESTED BY SOME SITES I RELOADED ALSO BIOS AND I STILL HAVE THE PROBLEM.

  I WOULD BE VERY GREATFUL FOR ANY HELP.

  Hi @lily-springer,.

  Thank you for your update.

  I am pleased that now when you close the lid, it does nothing.

  You don't have the possibility to contact the HP support for assistance. They can access your system remotely to help overcome the difficulties.

  Contact HP to Contact HP Support assistance

  Good luck!

• PHANTON Drive; When I try to open the my computer Explorer window is white and I get a message that I need to format the drive F.

  Hello

  I have a laptop running Windows 7 Home Premium 64-bit.  The HARD drive is configured to have a small partition for reserved system, Partition C for the system and the Partiton E for my files.  D drive is the DVD ROM Drive.

  Very occasionally when I try to open the my computer Explorer window is white and I get a message that I need to format the drive F.  I did not have a permanent Drive F and when this happened had no other connected devices.

  Drive F is often used, as are other drive letters, by various devices from time to time, such as external hard drives, Flash, my TomTom SatNav players, camera, readers of cards etc.

  Can someone explain why this happens and if I can do something to stop what is happening in the future?

  Eric

  Some Dell computers hard drives are extremely sensitive, if your computer is DELL' consider the technical service. Because if you run recovery, you have a headache.

• After closure, mac opened my account instead of open the screen of welcome with other accounts.

  After closure, mac opened my account instead of open the screen of welcome with other accounts. How can I fix?

  Disable auto login info the system prefs users and groups.

• got black screen when changing the screen background images

  got black screen when changing the screen background images

  can any one help

• I am a new user. The trial version ch & LR have been donloaded 2 fair days and he was attuned to the monthly plan. However, when open the LR, there all the same show PS with one day left and trial version with 29 days. Please please advise and would l

  I am a new user. The trial version ch & LR were uploaded 2 days ago and just joined the monthly plan. However, when open the LR, there all the same show PS with one day left and trial version with 29 days. Please please Advisor and would like to know if other apps like bridge etc. are included in the plan. Thank you very much.

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• I downloaded creative cloud with CC Photoshop, Premiere Pro CS6 and DC Acrobat install however Premiere Pro does not open. When open the button is on the other app, the first Pro app said only "up-to-date". If I click this, nothing happens?

  I downloaded creative cloud with CC Photoshop, Premiere Pro CS6 and DC Acrobat install however Premiere Pro does not open. When open the button is on the other app, the first Pro app said only "up-to-date". If I click this, nothing happens?

  check your directory program files adobe > first pro cs6 > first pro.exe file.

  (restart the cc app will probably also work.)

• Message received when openning the Adobe Premiere elements 12 'not possible to initialize the services online' what should I do?

  Hello

  How can I solve this problem?

  Message received when openning the Adobe Premiere elements 12 'not possible to initialize the services online' what should I do?

  Thanks in advence

  FL

  FLOureiro

  What operating system is running your 12 items first? Have you updated to 12 to 12.1 update using Help Menu/implementation of an open project? If this isn't the case, please do.

  For your immediate problem, did you update Online Services in the preferences?

  Where are you in the program when you get the message "failed to initialize the services online.

  You are in a country outside of the USA?

  There are some online services that are simply not available outside the United States.

  Please check and review and then, based on your details, we will consider what then.

  Thank you.

  RTA

• Satellite C855 1QQ started working when I open the screen

  When I turned off my pc and also close my screen. Then, when I open my pc my screen starts to work automatically.

  How can I close this property?

  I also found another useful document:
  + Why my laptop Windows 8 start automatically when you open the cover of the display? +
  http://APS2.toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm

  There are two possibilities. A hybrid shutdown occurred in Windows 8 (default option) or the "open Panel - Power On" is activated.

  "If this function recommended by the first document above, you can disable the hybrid stop or you would also disable the open screen - Power On.

• Download Google earth, but when I try to open the screen freezes and he says he's just GE initialization are not open

  I tried to open Google earth for months it downloads, but when I try to open the box with half the globe top freezes saying it's initialization. I press control/alt/delete and it says that the program is not responding

  Google earth used to be on my computer, but it disappeared. I tried everything suggested by Google forums burt without result

  Hello Terry,

  Check the log of the events for more details:

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

  Please check the boot to find the cause of the problem:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup.

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• When I click on the start menu, I can open one of the programs listed, but cannot open the Documents, computer, Control Panel, or whatever it is on the right columnetc.

  Well they open but block minimsed on the taskbar lower... cannot be opened. However, if I try and access the Documents or any other object through a program for example, open Word, then documents... or attach a file to an email everything works fine... Thus, the folders are there are fine, just cannot be opened directly... Clues!

  Your problem could relate to Associations of files, namely the right program is offered and used to open the file...

  You may need to show hidden files. Type the Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.

  In Windows Explorer, note the file of your selected file extension. Right-click on the file and select open with. Note the recommended program and view the details, including the extension of file here.

• LabVIEW crashes when opening the project

  Hey guys,.

  I'm running into an interesting issue where LabVIEW crashes when you open a project. This is the second time I encountered this problem on the same project. To get around it the first time, I simply deleted and remade my project, but since it happened again, I need to find a way to debug it. The symptom is that LabVIEW will crash at the opening of the project (sometimes I can see the screen "loading the vi") with no indication that the accident occurred. It does not even launch the reporter of the error, the process just dies. Anyone know how I can go about debugging it?

  xkenneth86,

  What version of LabVIEW? Have you had previous versions of LabVIEW on your computer? You can attach a screenshot of the accident?

• Reader crashes when opening the pdf while UAC elevation

  Hello

  I'm a developer who has a package installer for our software which, of course, requires UAC elevation to perform the installation.

  On the last screen of the installer, we try to give the user the possibility to open a .pdf of our user manual.  Any other than .pdf format works very well, but Adobe Reader will not open, and once this has happened, Adobe Reader does not work at all until the user opens a session and return to.

  Comments of the vendor of the package install (Setup factory):

  > >On Windows 8 and 8.1, Adobe Reader does not start correctly when it is called from the high count (after UAC has been shown and has been granted access). If you perform the same script from a facility that has been manifested to run "as applicant", you will see the PDF document opens correctly, which suggests that there is some kind of problem with the Adobe sandbox. If another application PDF, such as Foxit or SumatraPDF, is installed on the target computer and saved for the manipulation of PDF documents, you will see that the file opens correctly, even when the viewer of documents is launched, after the elevation of the user took.

  This seems to be a bug in Adobe Reader?  Or am I missing something?

  Scott

  Eve software postage

  I'm not saying that it was designed to work that way, or that everything is fine. But it can be good for you (and me) to review, it's a good idea to run Adobe Reader unnecessarily high. Similar considerations apply to the choice that many installers are doing "run applications now?" at the end.

  (Security scenario: lock PC.) Admin comes to install your software, between the password for UAC. Installation in competition, starts. The user now has a copy of Adobe Reader, where they can record in tight areas, perhaps compromising safety).

  (Privileges Scenaro: elevation software creates a file of preferences, as an administrator.) Later runs, not high, can not overwrite the preferences file, leaving the user to have preferences).

  (System scenario: I read that communication with the shell does not work for a higher app and shell not higher.) No further details).

• When from the screen is filled with vertical lines. How can I stop this anomaly?

  When I start the computer the screen shows verticl lines. I stop and restart and the computor starts normally. What is my problem and how to cure it?

  Hello

  • What is the brand and model of the computer?
  • Do you use the computer laptop or desktop?
  • Will there be any changes made on the computer before the show?
  • You get the error message?

  It seems that the video card driver is malfunctioning. The device driver is disabled in safe mode. To resolve this problem, we recommend to uninstall the existing video card driver and then reinstall it. To do this, try the following steps:

   

   

  Method 1:

  I suggest to start in safe mode and check if you are facing a similar question.

  A description of the options start Safe Mode in Windows XP

   

   

  Method 2:

  Download the latest video card driver on the manufacturer's Web site and install it on the computer.
  How to manage devices in Windows XP

  a. Click Start, click Run, type devmgmt.msc, and then click ok.
  b. in the list of objects, expand display adapters.
  c. make a right-click the sub element and click on uninstall.
  d. once it is uninstalled, restart the computer and reinstall the latest video card drivers.

  e. Once you have installed the driver, check if the problem persists.

  If you use control of the desktop computer connection cables and if the problem persists try to contact the computer manufacturer for assistance.