Delete all partitions

Similar Questions

• Toshiba-CD recovery deleted all partitions on satellite M50 181

  Hello

  After that I discovered that other images than the OEM Windows XP Image do not have driver for my laptop satellite M50 181 support, I decided to install the old Version-OEM.
  I had also installed a linux ubuntu, grub as boot loader.
  After you insert the recovery cd, there is no questioning what I wanted to do. The recovery process begins automatically delete all partitions and creating a large NTFS Partiotion ITERATE OVER ALL CONNECTED DEVICES (ipod, 500 GB backup drive).

  WHY DEVIL IS IT POSSIBLE? WHAT CAN I DO?
  Kind regards

  Cornelius

  After booting from the recovery CD, you should get 2 options;
  -Standard mode
  -Expert mode

  Using the Standard mode, the whole HARD disk will be formatted. Also al partitions will be erased.

  In expert mode, you may have chosen was the XP must be installed.

  I put t know what you did, but I presume that you have chosen the first method satandard

• Satellite U840-10R: is it possible to delete all partitions + install Win 8

  Hello everyone,

  I bought a labtop U840-10R yesterday and I would like to know if it is possible to delete all TOSHIBA partitions and create a single partition SSD (for windows 8) and another 500 GB for files?

  I met some difficulties to understand how SSD technology is currently used, so if you have information...

  Thank you

  Before you remove anything from the HARD drive, I recommend the establishment of recovery disk.
  The recovery disk allows you to set the system back to factory settings.
  After these disks have been created, you can do whatever you want :)

• Reset hardware g580 (delete all partitions)

  I recently bought a g580 with windows 8 is installed. He didn't get any installation media.

  I tried to install linux (the wrong way) and now I messed up my hard drive. The reader has like 8 different partitions and the boot loader invite you to charge me linux, even if it is not currently installed.

  I want to reset my computer to factory settings, delete all my partitions and keep windows 8.

  IE I want to make the computer exactly as it was when I got it, I am more conserned with the hard drive and I want to own, with only the necessary partitions installed.

  Thank you!

  Hi and thanks!

  I actually just installed linux over everything and it works fine so I won't do much to solve this problem immediately.

  I think it is strange that it is so difficult to "reset" a partitions of hard disks. But in any case, thank you for your answer!

• Can I delete all partitions and leave only the BONES? What are the implications?

  Hi all!

  I just bought a HP Pavilion desktop computer and I want to create a primary partition to install Linux and another to store my files, but I can have only 4 partitions on a drive, and the HP Pavilion comes with 3 partitions already.

  So, I think that the only partition required for Windows 7 is the appointed a "BONE", right?

  I imagine that if I delete the SYSTEM and HP_RECOVERY partitions? Windows will always start after I remove them?

  (I'm more worried about this SYSTEM partition... What is it anyway?)

  Thank you!

  OK, I was able to create 2 extended partitions and do what I wanted without having to remove anything... Thanks anyway!

• Impossible to delete the partitions of a table with the number of rows is zero

  Hi all
  
  I want to delete all partitions on all the tables in a schema having the number of lines equal to zero.
  
  I use the queries below to get a solution.
  
  Select 'EDIT '. '' || 'TABLE ' | TABLE_NAME | 'DROP '. 'PARTITION | Nom_partition from dba_tab_partitions where TABLE_OWNER = "xyz";
  
  Select count (*) in the table table_name partition (nom_partition).
  
  Edited by: 887563 October 17, 2011 13:39

  If you trust your statistics, you can simply use the stat num_rows in dba_tab_partitions:

  select *
  from dba_tab_partitions
  where table_owner = 'MY_SCHEMA'
  and num_rows = 0;
  

  But I think what you try to get some code like this:

  declare
    v_rows number;
    v_statement varchar2(500);
  begin
    for c in (select *
              from dba_tab_partitions
              where table_owner = 'MY_SCHEMA') loop
      v_statement := 'select count(*) from '||c.table_name||
                     ' partition ('||c.partition_name||') where rownum=1';
      --dbms_output.put_line(v_statement);  --for debugging
      execute immediate(v_statement)
      into v_rows;
      --dbms_output.put_line(c.table_name||' '||c.partition_name||' '||v_rows);  --for debugging
      if v_rows = 0 then
        v_statement := 'ALTER TABLE '||c.TABLE_NAME||' DROP PARTITION ' || c.PARTITION_NAME;
        dbms_output.put_line(v_statement); --shows the drop statements
        --execute immediate(v_statement); --remove comment to execute
      end if;
    end loop;
  end;
  

• Create a mapping of partition will delete all my data?

  I have serious problems with a hard disk. I have vital data and do not lose them. After much research, I have concluded that the partition plan is down. My question is: create a map of partition will delete all my data? "I found this app ' iPartition" who is able to create an apple partition map but warns me that my data will be lost. I remember from my research that people were saying that the data will be fine. Could someone help me! I think I'm losing it: p

  Creating a new partition map will not physically destroy the data on your HARD drive, but it will make it inaccessible. You need to start some recovery/restore software tools to recover your data. But the 100% success is not guaranteed. You are most probably going to lose some or all of your data in this process.

  Before trying anything, get an another HARD drive of the same size as the original, and create a clone (e.g. using dd in the Terminal). It must be a clone like that would give you an exact copy of the original, including the partition table broke and all the data on all partitions.

  When you have your clone store the original HARD disk in a safe place and carry out all repairs and attempts at recovery on the clone. In this way whatever you do degrades the original HDD already weakened.

  An alternative to the above process would be to find a company that specializes in restoring the data. But who can become very, very, very expensive.

  BTW, if you do not have a backup of your data, it cannot be so important. I suggest that start to implement a backup procedure now.

• Want to m6: HP Envy M6 recently install - I deleted all readers - now no partition

  Hello

  I deleted all the partitions of my because they were out of order and I was trying a really clean install.

  Now hard drive only shows no disc computer does no boot device.

  I lost my MBR? I win 10 on USB and could run partdisk, but do not know how and if my key of the OS also went. IS your key WIn 8 (or 10) saved to drive hard or in the material?

  Hi @Quikstix,

  Thank you for posting. I read your post, and I understand that you were trying to do a clean install of Windows 10.

  If you delete the operating system on your hard drive, you must use the support/recovery disks to restore the system first. Then you can upgrade the system to Windows 10 and perform a clean installation.

  HP computers - performing a recovery of system HP (Windows 7)

  HP computers - performing a recovery of HP (Windows 8) system

  HP Notebook PC - upgrade to Windows 10

  How to clean windows install 10

  To say thank you, click on the "thumbs-up". Accept the post as a solution, so problem solved, so that other people that you have the same problem can see.

  Kind regards

• How can I delete a partition and get all the free space?

  I have a partition on my computer, Local C drive and the Local disk D.  C drive is extremely low, free space and disk D is very high with free space. I am trying to delete the partition and have all the free space from D to C. is there someone who can help me maybe?  It would be greatly appreciated!

  Download the free Easeus Partition Master of http://www.easeus.com .  Keep in mind that there may be files on D: to restore factory settings, so do not delete if this is the case.

  I hope this helps.  Good luck.

• Help, please? I can't delete these Partitions OSX

  I can't delete these partitions of my macbook pro, can someone help please?

  All currencies and the readers are disconnected - I know not what/dev/disk1 is but the rest I'm just not sure what who or where it came from.

  -bash-3.2# diskutil list
  /dev/disk0
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:      GUID_partition_scheme                        *1.0 TB     disk0
    1:                        EFI EFI                     209.7 MB   disk0s1
    2:                  Apple_HFS Macintosh HD            999.3 GB   disk0s2
    3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
  /dev/disk1
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:     Apple_partition_scheme                        *1.3 GB     disk1
    1:        Apple_partition_map                         30.7 KB    disk1s1
    2:                  Apple_HFS OS X Base System        1.3 GB     disk1s2
  /dev/disk2
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:                            untitled               *5.2 MB     disk2
  /dev/disk3
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:                            untitled               *524.3 KB   disk3
  /dev/disk4
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:                            untitled               *524.3 KB   disk4
  /dev/disk5
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:                            untitled               *524.3 KB   disk5
  /dev/disk6
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:                            untitled               *524.3 KB   disk6
  /dev/disk7
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:                            untitled               *524.3 KB   disk7
  /dev/disk8
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:                            untitled               *6.3 MB     disk8
  /dev/disk9
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:                            untitled               *2.1 MB     disk9
  /dev/disk10
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:                            untitled               *1.0 MB     disk10
  /dev/disk11
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:                            untitled               *524.3 KB   disk11
  /dev/disk12
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:                            untitled               *524.3 KB   disk12
  /dev/disk13
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:                            untitled               *1.0 MB     disk13
  /dev/disk14
    #:                       TYPE NAME                    SIZE       IDENTIFIER
    0:                            untitled               *6.3 MB     disk14
  -bash-3.2#
  

  You must use the disk utility to remap your partitions, while the drive is connected.

  Some partitions are partitions to restore using the restore of Mac OS X internet functionality.

• delete a partition

  I have an external hard drive which had three partitions. My goal is to keep the contents of a partition on the disk and eliminate the other two. I deleted the partitions unwanted using disk utility but I can't well a way to totally eliminate the partitions. How to totally eliminate leaving them a disc without any partition.

  .

  I deleted the partitions unwanted using disk utility but I can't well a way to totally eliminate the partitions. How to totally eliminate leaving them a disc without any partition.

  Disk utility and repartition your hard drive 1 partition. You select the real drive, not no matter what partition under. Then click Partitions. From there, select the partition you want to delete, and then click the sign less. When you select a partition should be fired to blue. Utility disk in El Capitan is very confused.

  I guess your pie chart partition can do appear 3 partitions. Select one at a time, and then click the minus sign. When all 3 are deleted, SOME may appear as untitled 1 partition which should be all the space on your external drive.

• Recovery of a Satellite A100 (PSAA9) - deleted the partitions and XP Home no Pro

  We have recently had trouble with our laptop and decided to restore the settings from the manufacturer with the recovery CD from Media. My son decided to do when he started the program, he chose the option to delete the partitions the crash

  Now, he has completely formatted the HD remove the operating system (Windows XP Pro).
  When I bought the laptop, with what he came already installed WXP Pro and comes from the Certification sticker on the bottom of the laptop.
  Is there anyway I can receive an installation of Windows XP Pro CD?

  Generally, all models of Satellite laptops are delivered with the operating system Windows XP Home edition or Media Center Edition home. Toshiba's Satellite Pro series, and under this name, you can get WXP Pro operating system.

  Can you tell us what model you exactly A100-xxx?

  If your laptop has been in the showroom by the dealer, it is possible they are using clean installation of OS instead of supplied recovery media.

• You can delete a partition on Equium A200 without losing your OS?

  I have an A200 Equium with a partition on the disk hard drive is possible to delete the Partition without losing the Vista OS

  Can you please tell us what you mean exactly? What partition say you exactly?

  Please open computer management, and then click Disk Management. On the right side you will see the status of your HARD drive and all available partitions will be displayed here.

  At first he is shown with 1.46 GB of capacity (EISA Configuration) partition this partition belongs to Vista and please do not do something with it. There must be also the C for pre-installed Vista OS partition.

  Is there another partition (something like main D Partition)?

• How to delete the partition CDFS on PX1267E - 1 32?

  Now how can does anyone I delete the partition on that disk (PX1267E - 1 32) CDF?
  I want this disc using as an external USB without the CDFS partition hard drive.
  I do not use the REGEN backup software.

  Is this possible? I've tried several programs to delete this partition, but now, we did get the job done.
  Thank you

  Hello

  To be honest I ve no experience with these external hard drives, but generally the scores of all would be removed from the HARD drive if you want to format the HARD drive.

  Try to format it!

• Can't find/delete Bootcamp Partition

  Tried to use bootcamp to create a partition for my copy of windows, that I just got. He was suspended for a while creating the partition, so I force-quit it as several users online said to try to resolve the situation. Tried then to find and delete the partition, he tried to create. Ended up crashing the disk utility or something so I force restarted the computer to see if that helped. Now I can't find the partition on the disk utility at all, it shows the drive as having 1 TB less than expected (the size of the partition, I created or attempted to create), and he does it for some reason, introduce yourself when I press 'alt' on my keyboard on the computer.

  Is there a way to delete this partition and try this again without any reformatting my hard drive and restore from backup? I have a time machine backup, I don't want to wait 12 hours for 1 TB of data to be transferred...

  Please see the solution in doesn't have windows via bootcamp 8.1 installation .