Delete already installed updates this Dungeon reappears in download

Similar Questions

• A later version of the Apple software update is already installed on this computer.

  Recently, I had a new iPhone 5, so I had saved my old iPhone 4 with iTunes so I could transfer all my information. But when I connected my iPhone 5 it came with this message: "the"Rachel's IPhone"iPhone cannot be used because it requires a newer version of iTunes. Go to www.itunes.come to download the latest version of iTunes. " The iPhone 5 is iOS9.2

  So, I went on the website to download iTunes, since this was the 12.1.2 version and should be downloaded 12.3.2, went to do the implementation, then it came with the message: "a later version of the Apple software update is already installed on this computer." So, I tried to uninstall it (after each step on the Apple Support to do) but when I went back to uninstall all apple programs, I could not find "Apple Software Update", it wasn't in my programs...

  I did all the steps anyway, and the same message of "a later version of the Apple software update is already installed on this computer." came after I tried to reinstall iTunes.

  So, I guess my overall question is, what should I do? How can I fix?
  Please answer quickly.

  Try to repair the Apple Software Update of the programs and features Panel, remove it and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Windows 7 update does not see the already installed updates

  When I restarted Windows 7 after that my firewall, Zone Alarm Pro, gave an error to start the true vector Service I did and then restarted.  Now the update of Windows do not show my previously installed updates.

  It is said that I never installed updates but do show that updates optional 34 language.  What happened to all the other updates I've installed beforehand?

  PA Bear wrote: Why did you start another thread and why you don't mention the error 80072EFE in this thread?

  FOR INFO:

  0X80072EFE - ERROR_INTERNET_CONNECTION_ABORTED

  You may encounter temporary connection [e.g. 0x80072EFE] errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  If these errors persist, I had very seriously question the security of your computer, Ackman, especially considering what you said in this thread. YMMV.

• BlackBerry Smartphones Blackberry Desktop Software: "a newer version of this application is already installed on this computer."

  Hi, I am having a very frustrating problem and I can't seem to find any information or help.

  Running Windows 7 x 64, I had to update my blackberry a few weeks ago desktop software. Unfortunately, the update crashed during the update. I tried the update again, but Setup now stops at the message:

  

  However, there is no trace of any application of Desktop software on my computer. I tried to manually remove all RIM/Blackberry folders as well as the removal of all keys to register RIM/Blackberry. I tried to use Revo unistaller, several of the registry cleaners, all with no success.

  Now, I have to use Blackberry Destkop Manager 5. XX since I can't install anything higher than that. It gets really frustrating (that and the fact I had to Exchange my Bold 9900 for the 7th time in less than 6 months - and the one I use now has a * beep * ty button which doesn't always work) and extremely boring.

  If you can help, thanks.

  Whatever Sdgardne, layout of computers is not a solution. It is:

  Download and install jv16 Powertools of http://www.321download.com/LastFreeware/index.html. Launch the software, on the Uninstall tab, find the entry of Blackberry 7.0 now visible. Select this entry, and then uninstall it. In addition, check the other tabs to erase any trace of remaining registry Rim or Blackberry. Download and reinstall Blackberry Desktop Manager 7.0.

  Thanks for nothing.

  You would think that with a mobile phone $600, a customer service would go with it.

• Automatic Update keeps wanting to install the same 5 updates every day even after what they are already installed.

  The automatic update keeps eager to download and install the same 5 updates daily. These 5 updates are KB979909, KB982168 KB982524, KB983583, KB2418241. I looked at the log of update and it showes them already installed. This has happened since November. What can I do?

  See this response archived from a previous thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/32ba77cb-cff2-4155-b70d-e31b7ba4c8df >

• Impossible to uninstall Quicktime «a newer version of Quicktime is already installed...» »

  I have Windows Vista Home Premium 64-bit with SP1. I tried to update Itunes and it told me that I needed to uninstall the current version and then reinstall. I did this several times without any problems. This time, when I uninstall it won't let me not uninstall Quicktime, Apple Application Support, or Apple update software.

  When I try to uninstall Quicktime I get the following message. "A newer version of Quicktime is already installed. This cannont installation proceed so that the most recent version of Quicktime is installed".

  When I try to uninstall the Application Support Apple and Apple update I get the message "the feature you are trying to use is on a network unavailable resource."

  I installed Revo Uninstaller and it has removed a from there, but Quicktime and Apple programs are always in my programs on my computer. When I try to reinstall Itunes it says I already have a newer version of Quicktime and do not complete the installation.

  I'm completely frusterated. Help, please.

  Thank you

  Jana

  Hi Jana,

  We checked for the error message on the Apple discussion forums and found a similar question. users were able to solve the problem by manually deleting the existing components of iTunes.
  "See the steps posted by 'black b' on June 23, 2009 06:26 ' in this link:http://discussions.apple.com/thread.jspa?threadID=2051425

  Note: We recommend that you follow the manual procedure to remove iTunes and check the result.

  The manual procedure to remove iTunes is also mentioned in this article in chapter "Verify iTunes and related components are completely uninstalled":http://support.apple.com/kb/HT1923

  For further assistance on iTunes, please post your request to 'Installation & Upgrading iTunes for Windows Forum':
  http://discussions.Apple.com/forum.jspa?forumid=792

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update error 80071 error code has 91. Cannot install updater

  Hi all

  I can no longer install Windows updates.

  Im trying to install this update:

  KB3080079, KB3083710, KB2952664, KB2999226

  I still have this error: Windows Update error 80071A 91 error code.

  I get the error even if I try to install the updates one by one, do not use Windows Update, but after their download from Microsoft of the site.

  The last update, I installed successfully is (KB3069114)

  My sysemt is Windows 7 x 64 Home Premium SP1.

  I already tried the System Update Readiness tool descrivbe KB947821 but the problem is still there.

  Can someone help me?

  Thanks in advance

  Hello Bishop,.

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause and to check the health of your system, to solve the problem permanently.

  According to the description you posted in your message seems that you can not install updates, this problem may occur if one or more of the following conditions are met:

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  If it helps, try the methods and check them off below.

  Method 1

  If I'm wrong, you tried not Troubleshooting Windows Update below to solve your problem and if this isn't the same link, then try to run the troubleshooter.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2

  Step 1

  If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Step 2

  Try to follow the steps in the Microsoft Article and check if it helps.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows/troubleshoot-problems-installing-updates#1TC=Windows-7

  Method 3

  If after completing the two steps issue persists trying to follow the steps described in the following Microsoft article different methods.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Registry warning : This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

  Important:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Windows XP Pro does not install updates. They fail repeatedly.

  UPDATES WINDOWS DOWNLOAD OK, BUT THEN WHEN I TRY TO INSTALL ILS HANG. MOST UPDATES THAT ARE HANG WITH A NET. I TRIED THE FIX FOR UPDATE TOOL AND HE COULDN'T FIND ANYTHING WRONG.

  Hello

  1. What is the description which are impossible to install updates?

  2. What is the message exact error do you get when installing windows update?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to reset components to update Windows from the following link and then try to install the updates.

  http://support.Microsoft.com/kb/971058

  Method 2:

  Also try to set up your computer in a clean boot state, and check if the same issue occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

   

  Method 3: If the problem persists then try to install updates manually from the Microsoft Download Center.

  a. go to the Microsoft Download site, type the number of "KB" of the update in the download search box and then click OK.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Hope this information is useful.

• After that 'stop and install updates' on restart it happens to "configuration" 3/3 then restarts then does "configuration 3/3" again and restarts in a loop ""»

  This is windows vista business.

  After that 'stop and install updates' on restart it happens to "configuration" 3/3 then restarts then does "configuration 3/3" again and restarts in a loop. ""» I tried to find out latest fashion good and safe, but still the same. Help, please.
  Is it possible from a different drive to boot and then by applying some changes that would stop it. At the time when the computer is unusable, it just starts to "configuration updated 3/3" then restarts.

  Hello

  Try these methods.

  Method 1:

  You have to do a cold start, press and hold power for a few seconds (10).

  Wait a minute or two and turn it back on.

  Make sure that "all the" non-essential devices are disconnected. (USB keys (for example, flash drives) or any other external media like this takes place.).

  If you can, start safe mode.

  Start your computer in safe mode with network.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  NOTE: see 3 from the link above, Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Select Mode safe mode with networking.

  Method 2:

  Use the system restore feature:

  (a) click Start, type system restore in the Search box or search programs and filesand then click on the system restore under the programs section.

  (b) on the System Restore page, click Next.

  (c) select a restore point during which you know the operating system works, and then click Next.

  The restore point should be a date that precedes the first time you encountered the problem.

  NOTE: If you use system restore when the computer is in safe mode, you can't undo the restore operation.

  See also: error: configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer when you try to install updates for Windows

  http://support.Microsoft.com/kb/949358

  Data loss caveat:

  Be sure to back up data that you want to keep before you begin. This is to ensure that there is no loss of data.

  Method 3:

  Step 1:

  To avoid this problem on Windows Vista, obtain and install update 937287 from the Microsoft Download Center separately from all other updates on Windows Update site. Install the update that applies to your version of Windows Vista so that you are able to install future updates.

  A software update is available for the Windows Vista installation software feature

  http://support.Microsoft.com/kb/937287/en-us

  The following files are available for download from the Microsoft Download Center:

  Windows Vista x 86 systems

  http://www.Microsoft.com/download/en/details.aspx?amp;displaylang=en&ID=15287

  Windows Vista x 64 systems

  http://www.Microsoft.com/download/en/details.aspx?amp;displaylang=en&ID=23732

  Step 2:

  Save the update to a location on your hard drive, you can find and then install the update from there.

  Download, *Save* and install the update with no security (antivirus/security suite) software installed, disconnect from the Internet, disable the firewall & close all non-essential processes in the Task Manager.

  Disable antivirus programs and firewalls.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I also recommend taking off of USB keys (for example, flash drives) or any other external media, as this takes place.

  When the file is downloaded, see these steps.

  (a) right -click on the file and

  (b) select run as administrator from the menu.

  Check if it helps.

• How to upgrade to VISTA already installed after 5 years of use XP Pro

  I bought a Dell Vostro 200 in 2008, using XP Pro as operating system.   Apparently, Vista Business 32-bit SP1 is already installed on this PC - I have a DVD of resettlement for this.

  How can I move from XP to Vista?    I have no idea as to where he is or how to access Vista.   Problems to watch?

  Many kind thanks to the Dell Community for your help.

  K

  You can install Windows Vista 32 bit, an upgrade, however I do not recommend to do as far as the performance is usually a bit more severe if 'upgraded' through 'upgrade '.

• Cannot install updates in Windows 8 due to the error Code 80240016

  I can't be updated too Windows 8.1 also. I think that this error has something to do with this problem as well.

  Original title: when trying to install an update from Windows to Windows 8 I constantly get an error 80240016 Code and would like to know how can I do to fix this problem?

  If you see the Windows Update error code 80240016 0 x or 80240016 while trying to install updates, this means usually another installation is in progress.
  http://Windows.Microsoft.com/en-AU/Windows-8/Windows-Update-error-0x80240016

  Why I can't update in the store?
  http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

• Repeated version already installed installation requests

  using windows XP Pro with the version of flash player currently installed 14.0.0.145 - pop guard asking to install the latest version of Adobe - made a download and then made an installation with the error message saying error permissions - but no problem with permission and the latest version is already installed - done this for years

  I looked at one of my other computers with identical permissions and not get the same message by looking at the Setup log file - so I deduce that the xp operating system is the problem - there is internet solutions on how to fix a framework for permissions xp corrupted - I'll have to try this possibility - just to tell you thank you again once

• I install photoshop on desktop when his laptop computer already installed on?

  I install photoshop on desktop when his laptop computer already installed on?

  OK, simply download and install Creative Cloud Desktop app on the laptop, and then from there to install Photoshop and sign in with your id and password to activate.

  Download Adobe Creative cloud apps | Free trial of Adobe CC

• On Firefox 4.0 when I try to play a video, I get "You need to update your Adobe Flash Player to view this video." But Adobe Flash 10.1.102.64 is already installed, and it's the only version I have. In addition, all the videos work fine in Internet Explo

  Firefox does not apparently see that a high enough version of Adobe Flash is already installed (there is no downgrade). Other applications are able to run Flash without any problems.

  The Flash player for Firefox is 10.2.159.1 that the fixed Zero Day exploit in the previous version, see: Adobe releases update of Flash Player Security.

  What I suggest you do is to go to http://kb2.adobe.com/cps/141/tn_14157.html and download Adobe Flash uninstaller, and that (first close Firefox). Then, go to http://get.adobe.com/flashplayer/ to obtain the current version.

  Uninstaller will also uninstall IE8, so you'll have to use that to download and install it again I'm afraid. This is because the version of Firefox does not have the ActiveX control that is required to operate the Flash in IE8.

• I have lr 5 installed on my mac, I want to buy photographer cc (lr and ps) monthly subscription. How this will affect the already installed lr version... it will update my current version. I'm worried about all the files and it works

  I have lr 5 installed on my mac, I want to buy photographer cc (lr and ps) monthly subscription. How this will affect the already installed lr version... it will update my current version. I'm worried about all the files and work that I already have in my current version of lr 5? Thank you

  You can make reference to: Lightroom and Creative Cloud FAQ   using Adobe Photoshop Lightroom | Lightroom / Common Questions

  Concerning

  Baudier