On Firefox 4.0 when I try to play a video, I get "You need to update your Adobe Flash Player to view this video." But Adobe Flash 10.1.102.64 is already installed, and it's the only version I have. In addition, all the videos work fine in Internet Explo

Similar Questions

• When I try to view a YouTube video, I get "you need to update your Adobe Flash Player.

  When I press on & quot; Download adobe & quot;. He's going through the motions and ends with a display of a screen of Flash Player. When I go back to watch the vidio, I get the same question.

  I use Windows 7 on a 64 bit system.

  I use IE 9 on a 64 bit system.

  I tried to remove Adobe flash player and load the 32-bit version.

  I tried to remove Adobe flash player and load the 64-bit version.

  I tried to remove Adobe flash player and loading of version 11.

  I tried to remove Adobe flash player and loading of version 10.

  Nothing seems to work.

  I have asked this same question before, but can't find any reference.

  See http://forums.adobe.com/thread/867968

• I have a problem. Update of Flash Player required you must download and install the latest version of Adobe Flash Player to view this content. but my Flash player is up-to-date. I use ubuntu10.4, firefox 8.0

  I have a problem. Update of Flash Player required you must download and install the latest version of Adobe Flash Player to view this content. but my Flash player is up-to-date. I use ubuntu10.4, firefox 8.0

  You are welcome

• Windows media player and error message when I try to play a video

  When I try to play a video, I get error message --a encountered an error and needs to close.  The video starts to open and then I get the message.  I am able to open the video with other programs.  It seems to happen when I try to open a video of an i phone or my new digital camera.

  What format is the video in? He will not play MP4 without codecs. Or if you have installed Quicktime

• iTunes can't locate my music. When I try to play a song one get an exclamation point and the message "the song could not be used because the original file cannot be found. You want to locate?

  I don't know if I am posting this in the right place. If she must be somewhere else please let me know.

  When I try to play a song I get an exclamation point next to the song and a pop up that says: "the song could not be used because the original file cannot be found. You want to locate? »

  I use Windows 10 and iTunes version 12.3.1.

  It's the path statement where the music is currently located on my hard drive:

  

  If I click on a single song from within File Explorer, it opens iTunes and the song plays without problem.

  To try to solve this problem, I went in 'Advanced' in 'Préférences' and changed the iTunes media folder location to match the location of the files on my disk hard as you can see below.

  

  Unfortunately, it did not work either. iTunes is always gives me the same message that it cannot locate the original files. I REALLY hope someone can help me finally tried for weeks to solve this problem.

  Thank you!

  Now iCloud is down, if something happens on the end of apples.

• Windows Media Player Vista when I try to play some videos, including some film my daughter loaded on a usb key that I encounter the error code cood11d1

  I presume that I have windows media version 11 of the drive and when I try to play some videos, including some film my daughter loaded on a usb key that I encounter the error code cood11d1. My attempts appear so far have confirmed that I have the latest updates available for my drive, and after you run the fix it program tell me no error or problems when identified. Appreciate any help that can be offered

  Hi at Rob Merci for the quick reply, but before that I followed one of your suggestions I confirm the error message I get when trying to play some movies is certainly cood11d1 so your thoughts before going further with thank you bob.

  ==========================================

  Followign links may be worth a visit:

  (935336) Windows Media Player 11 cannot
  read content protected by DRM on Windows Vista
  http://support.Microsoft.com/kb/935336

  (925705) when you try to use Windows Media
  Player 11 to play a digital rights management
  (DRM) - protected media file media cannot play
  http://support.Microsoft.com/kb/925705

  The security component upgrade
  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  Windows Media Player: Mini WMP FAQ
  http://zachd.com/PSS/PSS.html
  (scroll down a bit to the 3rd entry that said: Vista only)

  Windows Media Player error c00d11b1 resolved
  http://Strom.WordPress.com/2007/04/06/Windows-Media-Player-error-C00D11B1-solved/
  (it's a long discussion on the error 0XC00D11B1)

• When I try to play a video I have a video with no sound

  original title: Windows Vista/windows media player/videonosound

  my windows media player will play a dvd with the sound when I try to play a video that I have a video with no sound. I tried to upload an ogg codec so I can get a little sound of my video.

  Help please.

  Angie line Graham

  Although Microsoft does not provide a feedback about which codecs you need, you'll probably want to install a free app called MediaInfo that will analyze the file you are trying to play and to determine what exact codec you need to play the file. I walk through the process of fix codec errors in this tutorial on MediaInfo.

  If it's an OGG file as you indicate, the best thing to do is to play any other application, but Windows Media Player, new support for the codec for OGG in WMP is ugly, but I would check double what you need first.

• When I try to play a DVD I get the following error: C00D1163 indicating a digital license incompatibility. How can I fix it?

  When I try to play a DVD I get the following error: C00D1163 indicating a digital license incompatibility.  How can I fix it?

  Hi ratdogmw,

  1. what kind of file contains the DVD?

  2. If it works well before? If so, then remember to make changes to the computer, after which the issue started?

  I suggest you to take a look at the following article link and check if it helps:

  Windows Media Player Error Message help

  I hope this helps.

• I have a plan with adobe photoshop and lightroom.  The lightroom works fine, but I can't get the photoshop to run.  I have to go back to an old copy of photoshop to do the work.  All thoughts

  I have a plan with adobe photoshop and lightroom.  The lightroom works fine, but I can't get the photoshop to run.  I have to go back to an old copy of photoshop to do the work.  All thoughts

  Thank you for your help.  I just downloaded the Photoshop CC2015 for the 7th time and it now seems to work fine.  Sorry to have bothered you... It is good to know that there are people like you who will help if necessary.

  Thanks again.

• You need to update your Flash Player and enable Javascript to view this content"

  I have recently updated for CS4 to CS6... all my Web Sites & pages still work... But now I get the message "you need to upgrade your Flash Player and enable Javascript" I'm on the last level of Flash Player and JavaScript is enabled?    This could be one that is Version 8 thing? Thank you

  Thanks for the help... I took your clue. Once I saw he worked in Live but NOT design... Who told me my Mgr Extension.   Somehow? DW passed the link to the SSv4_DW_ext.mpx. After I reinstalled it... works very well.   Thanks again.

• Try to plug it into the router which is already installed and running with the other computers in the House.

  My computer says "Windows cannot find the certificate to connect to the network."  This computer is working - and an administrator.  This person could not help me.  Hope someone here can...

  The 'certificate' this computer is looking for is something that is used in networks wireless business and almost never in home wireless networks.

  The following assumes that you have given to your home network wireless (SSID of the router) "name" which is recognizable as yours and different from the network name to your work.

  The following also assumes that you are using Windows XP service pack 3 and you use to control your wireless Windows Wireless Zero Configuration (WZC) adapter.

  If none of these assumptions are not correct, provide the relevant information.

  If all of the above assumptions are correct, then

  • Open network connections (start > run > ncpa.cpl > OK)
  • Right-click on the icon for your wireless adapter and select Properties
  • Click the "Wireless Networks" tab.  This is where you confirm that "Use Windows to configure my wireless network" is checked. If it is not checked, stop here - you need to identify the utility that controls your wireless adapter before continuing. a good place to look is the icons in the Notification area (next to the time display)
  • Select your network (SSID of your router) from the list of "Preferred networks", and then click Properties
  • Click on the "Authentication" tab and uncheck the box for "enable authentication IEEE 802. 1 x for this network. "
  • OK your way out.

  If "allow authentication IEEE 802. 1 x for this network"is checked, but grayed out, so you can't change it, click 'Cancel' to return to the"Wireless Networks"tab and"Remove"the entry of your router.  Then click on "View Wireless Networks", select your router, click Connect and enter your password when you are prompted.

• How to get the key for windows 7 already installed and supplied with the laptop.

  I bought Lenovo laptop, 2 years back, and he had windows 7 Home premium.  Now it is showing my windows cannot be real and asks for the key for verification. Key was written on a label on the back of my laptop. The key is now unreadable on the sticker. I'm looking for the key to verification?

  If the product key on the COA sticker is damaged, then your options include:

  Reinstall Windows 7 using the supplied with your laptop Lenovo recovery partition:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-4HWSE3

  Computers laptops Lenovo include a function called the Lenovo OneKey Recovery button, which is used to boot into the recovery environment and to reinstall Windows.

  If this does not work, contact technical support http://www-307.ibm.com/pc/support/site.wss/homeLenovo.do and request replacement CD-ROM

  If these options are not available, you will need to purchase a new product key for Windows 7 Home Premium.

  You can also try to do a restore of the system before you start, facing this problem to see if suits him.

• Recently, when I try to play Youtube videos they start and after about 2 seconds I get ' year error occurred. " "Please try again later".

  I have the latest version of Firefox and also the latest version of the flash player.
  YouTube videos play fine on internet explore and google chrome.

  Thank you for that, but have you seen a difference when using the HTML5 player by turning off Flash?

  There was a change in the default drive that youtube has used this week to other latest browsers and this can affect you.

• Windows media player is lagging after reactivation when I try to play HD videos!

  When I wake up my pc in mode 'sleep' and trying to open HD (h.264 or whatever he calls mov) video my computer freezes, shifts and so on WMP12 starts with the high CPU usage no video or anything that could be done... just unusable... my mouse lag... can restart only! After I restarted my laptop my hd videos play fine, but as soon as I put my pc on wake and mode 'sleep' to the top of my habit of hd videos more play.

  Windows 7 Home Premium 64-bit.

  I tried sfc/scannow 'he says Windows did not find any breach of integrity resources .

  Hi dennyy77,
   
  Welcome to the Microsoft Answers community.
  a. Since when are you facing this problem?
   
   
  I suggest you to update the video driver and check if the problem persists.
   
  Steps to update the driver:
  1. click on the Start button.
  2. in the search box type devmgmt.msc, and then press ENTER.
  3. Select the audio device and right click on it
  4. now, select Properties.
  5. in the Properties window, on the driver tab, click Update driver.
  6. After installing the updates, restart the computer.
   
  For more information visit http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
   
  Try the methods below and let me know if this helped.
   
  Method 1: Set the hard drive to stop a minute or 2 before sleep.

  1. click on the Start button and select Control Panel.
  2. click the Power Options icon.
  3. click on the link Edit plan settings under your power plan. (See screenshot below)
  

  4. click on change advanced power settings. (See screenshot below)
  
  5. click on change settings that are currently unavailable.
  NOTE: This will allow power options that are grayed out to work now and not be gray.
   
  6. now click on the button "+" next to the hard drive.
  Now set the time if that hard drive goes to sleep 1 or 2 minutes before going to sleep.
   
  Method 2: Perform the clean boot your computer.
   
  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  To perform a clean boot on a computer, follow these steps.
   
  1. click on start, type msconfig in the search box and press ENTER.
   
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
   
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  Please follow the system in the boot environment. If the problem does not occur, it indicates that the problem is related to an application or a service, we have disabled. You can use the MSCONFIG tool again to reactivate the disabled one by one element to find the culprit.
   
  If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
   http://support.microsoft.com/kb/331796 . In addition, refer to the section on how to restore your computer to a Normal startup mode
   
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• When I try to play a DVD, I get video but no sound.

  I HAVE WINDOWS XP SP3, I RECENTLY USED FIX IT IS A FUNCTION OF MEDIA PLAYER TO DETECT ANY PROBLEM. HE POINTED OUT THAT MY DVD DRIVE IS NOT DETECTED BY MEDIA PLAYER, EVEN IF IT IS LISTED IN THE DEVICE MANAGER AND WORK FINE ON OTHER MEDIA PLAYERS. I TRIED TO PLAY A DVD MOVIE BUT I COULD ONLY SEE THE VIDEO AND HAD NO AUDIO, THE DVD EVEN WHEN I PLAYED IN VLC WORKED WITH AUDIO-VIDEO BOTH. WHAT IS THE PROBLEM? Help?

  original title: MICROSOFT DIFFICULTY IT REPORTS DVD PLAYER NOT DETECTED BY MEDIA PLAYER

  Hello

  Were there any changes made on the computer before the show?

  Method 1:

  In Windows Media Player.

  a. click on Tools and select Options.

  b. click on devices and click on DVD , then select Properties.

  c. make sure that playback and Rip are set to digital.

  Method 2:

  I also suggest you check out the link and try to update the Codecs on the computer:

  Package of Installation of codec

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=507

  See also:

  Player Windows Media for Windows XP supported Codecs

  http://support.Microsoft.com/kb/291948