delete the corrupted workflow

Similar Questions

• Cannot delete the corrupted/unreadable file in mode without failure or BACK

  Instructions Web software to solve my problem was to remove the user files, uninstall and reinstall the program. I was able to delete the 5 files 4. The 5th is damaged and unreadable. It will not remove in safe mode and cannot be found in the BACK. When the path is typed in the BACK the following message; _ is not recognized as internal or external, command an executable program or a batch file.

  1. try running Chkdsk. How to use Chkdsk - http://tinyurl.com/2obcd

  2. If this does not work, try to remove the file from outside of Windows. Start the computer with Linux Livecd such as Knoppix. If the file system is FAT32, you won't have a problem. If it is NTFS, you can use the NTFS driver. Google to find out how. Or try with a Bart PE.

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder MS - MVP - Elephant Boy computers - Don ' t Panic!

• How can I check and delete the corrupted files?

  I was told that my laptop performance could be carried out by missing or corrupt files. I can't find the system check in the Panel, and it is not found when I try to kick it and run. I don't have the original recovery or installation disk disk.

  According to the page I've linked in the other post: Hard Drive16 GB (Solid State Drive Flash Module).  Solid State Drive SSD =

  You can always do another:

  Check and repair corrupt files is to open cmd in the start menu, then right click "Run as Administrator".  Then type chkdsk c: / r

  • If you get an error "Chkdsk cannot run", type in, ChkDsk runs on your next Windows startup

  Who will eventually fix any corrupt system files, but not others.  You suspect corruption in the other or all of the files, then probably the SSD is having problems.  That can be fixed with conventional methods, as far as I KNOW.  Maybe time to replace it with a new SSD or hard drive classic, if possible.  Don't know how HP implimented the SSD in the mini.

  Since there is no DVD/CD drive integrated into the unit, get an external hard drive or USB key and backs up all data that you consider important before things get worse.  You can buy 16 GB flash drives or bigger, so that would be my suggestion.  Just copy everything on a flashdrive before anything else is done.

  BTW: I found a recovery here media: http://www.computersurgeons.com/SearchProducts.aspx?sbt=hp%20mini%201030nr%20&bkm=Results#Results

• How to delete the corrupted registry key

  I try to install the Excel 2010 beta, but it says Office 2003 is damaged and must be repaired or removed and will not be installed (I have several versions of Excel is installed, including 2003).

  So I tried to run a repair of Office 2003 from the Office 2003 installation, but it says:

  Error 1402. Setup cannot open the HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Run\OptionalComponents\MSFS registry key. Make sure you have sufficient permissions to access the registry...

  I tried:

  -Deletion of the key in regedit. It won't do. FWIW, it does not make changes to it as an added value and does not remove the key from its parent.

  -Assignment of permissions for the key myself. It won't do.

  -Taking possession of the key. It does not.

  -Execution 'Free Windows Registry Repair 2.0' and do a full scan. There are lots of things to fix, but it does not solve this problem.

  -Run PSEXEC PSTOOLS of to run regedit under the system account and appropriate by the system account. It does not.

  -Execution of RegDelNull.exe and make full analysis focused on HKLM and analysis. In both cases, he found nothing to fix.

  Is there a way to make a deletion of the brute force of a registry key? What can I do?

  Thank you

  Greg

  FWIW, in case someone found this looking for an answer to the same question, you gave me the answer on answers.yahoo.com. The answer was to log on under administrator account (not just any account which is part of the Administrators group, but the account specifically named 'Administrator') and assign permissions to this account. It worked.

  Greg

• Deleting the files corrupted in the recycled folder

  I am running Windows XP and I have tried to run the defrag program.  The program will not work until the end because of corrupted files (4) in the recycled folder.  I can view the list of files by going to the command prompt, but no action that I have tried there will allow me to delete these files.  How can I delete these files in the recycled folder?

  You have left out some important information and may not have read material thread the Tom very carefully.

  Represents the drive on which this basket located in NTFS or FAT32 format?

  On NTFS, XP drives, the name of the file from the Recycle Bin is DRIVE: \Recycler

  On the FAT, XP drives, the name of the file from the Recycle Bin is DRIVE: \Recycled

  (The name change again in Vista and Win 7, but you said you have XP)

  If the drive is NTFS, it was converted to FAT32 or formatted directly?

  If you used the CONVERT command to convert a drive to the FAT format on a disk formatted in NTFS, you will always have the directory drive: \Recycled old, but he is no longer the basket.  If this is the case, you can delete the whole directory (if ensure that a directory C:\Recycler exist, just in case) using rmdir /s in a command prompt window.

  You can read all documents under the "basket" at http://www.kellys-korner-xp.com/xp_abc.htm

  There are several methods to remove otherwise undeleteable files.  In ascending order of the drawbacks:

  Method 1
  Open a command prompt window (start > run > cmd > OK)
  Type the following commands in the command prompt window and press ENTER after each line

  CD C:\Recycled
  ATTRIB s h - r *. *
  Del *. *

  If the last command was NOT successful, then

  Method 2
  1 always open method command prompt window, start the Task Manager
  Find explorer.exe in the processes list, right-click and select end process
  Return to the command prompt window and see if del *. * will now delete the files
  If the files are deleted, return to the Task Manager, click on file > new task (run...), type explorer.exe, and then click OK.

  If the files still do not remove, then

  Method 3
  Redemarrer restart in Safe Mode, and then follow the steps in method 1

  If the files still do not remove, then

  Method 4
  Download the iso file to a live Linux such as Knoppixdistribution.
  Burn a CD using a tool like the free ImgBurn
  Boot from the CD (you may need to change the boot order in your BIOS)
  Remove files from Linux

• delete the contents of the workflow

  I received a request to remove the contents of the workflow.
  If the content is rejected, we always want to save if needed later.
  
  So my plan was to change the type of contect and approve the content.
  
  But the only way I can see to approve, is to go to the active workflow and approval stages.
  E-mails are sent to approvers to each step. I would avoid the email of workflow for items in these locations.
  
  Thank you

  You cannot refresh SG during WF criteria. So forget that one.

  Why not use the event to update in the Windows Firewall to monitor a specific indicator to be defined in the metadata - for example xWithdrawFromWorkflow if the value is true (in a patch) and then use the wfExit function to get out of the WF immediately without approval. Otherwise there is little to separate a real pleasure of an approval which took place just to get an element of WF.

  Tim

• FFis already running but not responding do not mistake... Cannot delete the parent.lock "in use" what to do now?

  I keep getting FF or error that responded to the questionnaire. When I close it I get "your FF profile cannot be loaded.

  I read about the removal of the parent.lock. When I try to delete told me "can not delete the file because it is being used.

  So what do I do now to get FF going

  You can delete the file immediately after the computer starts?

  Help if you start Windows Explorer as an administrator?

  You can create a new profile as a test to see if your profile is the source of the problem.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile already used in the new profile, but be careful not to copy files corrupted to avoid transporting more problems.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Cannot delete the sparsebundle apparently empty

  • I have an old Sparsebundle flying over form a defunct Time Machine (created by OSX 10.10.5 on a mounted AFP network drive. Not a Time Capsule from Apple).
  • I AM able to mount AFP player and cd in the sparsebundle... However, I can't get the sparsebundle as a disc image (corrupted... not recognized as valid a picture).
  • chflags nouchg < sparsebundle_dir_name > succeeded.
  • I tried to delete the sparsebundle to the command line and the finder. It fails to delete saying EITHER "directory not empty" or "directory in use. Most of the content was removed with the exception of the repertoire 'bands '.
  • I CAN cd into the directory of bands in the sparsebundle directory.
  • The directory of "band" seems to be empty (ls - la gives me nothing... not even '.) « et »..')
  • 'Du - sk bands' shows that it takes 6 GBs)
  • Try to remove the "strips" directory directly gives an error of 'Repertoire in use' to the CLI.

  Completely lost at this point.

  THX

  Remove the disc.

  Try to remove the directory via SMB instead. A lot of non-apple devices adds AFP as after the fact, and there are limits to its use.

  Have you tried Windows? Or internal installation of the computer or NAS or whatever it is which the sparsebundle is activated.

  Could you move the drive to the Mac and connect directly via USB, which can also function to allow you to remove the directories that have permissions issues.

• access code will work no - has rejected the correct password, deleted the data

  Hi people

  Had a problem with the iPhone OS 9.3.1 (6 s)

  The password was rejected, even if she did the same every time: it worked randomly.  This question has followed a request to change the password to another.  I put in an alphanumeric password with a special character, as he refused to let me use the previous password.

  I tried to change the password but failed at each point and wouldn't let me delete the iPhone either.  He decided to spontaneously clear the data while it was in my pocket.

  I restored the iPhone and will monitor.

  I was wondering if anyone else has had this problem and it could be a virus or something.  Could it be spyware? Or simply corrupted software?

  Your thoughts appreciated

  Unless your phone has been jailbroken (and I doubt it was) it wouldn't get a virus.

  It's a working phone? Is there an exchange account or an email from work?

  The request came via a pop-up of Safari?

  If the request came from Safari, I would follow the steps below. If it's a working phone that I would like to talk to your people in TI.

  Close Safari completely from the window of the selector app by double clicking the Home button and slide up the preview pane of Safari until it disappears from the display. You may need to search the Safari part covering scribbles to the left. Then go to settings > Safari > clear the history and data from the Web site. Then perform a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears.

• WARNING: iCloud library deletes the original photos on Mac

  Recently, I turned on the library to iCloud in the Photos app preferences. I chose the option "Download this Mac originals," not "optimize Mac memory" so all my original full quality photos will remain on my Mac and probably be safe. After uploading to the cloud ended (took a while), I made a backup of my Mac using Retrospect. I noticed that a lot (almost all by the number of GB) photos were being backed up, what happens if the file or its attributes modified. I was wondering why to send photos to the cloud would change my photo files. I decided to review individual cases to see if there were differences from the original versions. (Luckily, I had a clone of my HD last week, which had all my photos some before iCloud photo library has been activated.) So I could compare the originals on the clone for the pictures changed on my Mac's hard drive.)

  To find files modified more easy, I used sync Pro, which gives me a list of files that it thinks are different. I discovered that more than 150 of my 9500 photos have been deleted after turning on iCloud photo library! It was shocking, but it is good news.

  I have carefully reviewed the photos maybe a decade or two that had been deleted. If they had any duplicates which were not deleted. In other words, apparently Photos, trying to send photos to iCloud, reviewed my photos and remove duplicates from my hard drive. By comparing these duplicates, I have found not all were an exact replica, as follows.

  • Several photos appear to be identical files with the same size and file modification dates. Actually duplicates, thus eliminating one is without real loss, although I don't like deletions of software that Apple all of my original photos at first.
  • Some 'duplicates' had different size files. It's relative. In all these cases, examine photos of GraphicConverter revealed that Photos had deleted the photo of lower quality, depending on the quality of compression ratio or %. (The photo of lower quality is not always a smaller file size.)
  • Some "double" had same file sizes but different modification dates. I think that, in these cases, pictures kept the old file, which would probably be the original.
  • Some have had different file size and date to change different.  In these cases the Photos deleted the photo of lower quality.

  Based on examination of a small percentage of the total number of deleted duplicates, Photos seem to be taken of intelligent decisions on how to remove duplicate.

  What I don't know, is how or why most photo changed during the download process to iCloud, such files as revealed by Retrospect. But looking at my photos, I did not notice any obvious problems.

  Implementation of Apple to iCloud library caused similar problems when I tried first. He changed most of my files of songs (according to retrospective). When this happened, I have restored the original files of the song from a backup and off the musical library to iCloud. I gave Apple several months for bugs and the week last tried railway. This time, it seems to go smoothly and none of my songs files have been changed. Now I'm enjoyimg music Apple and the possibility to add streaming music to my playlists.

  I like to be able to view my pictures on all my Apple devices, and when the next tvOS comes out soon, I'll be able to view my library on my Apple TV iCloud too. So I won't restore all my photos from a backup, then off iCloud photo library. Here's hoping that I find out later that one of my favorite photos are definitely missing or altered.

  El Capitan 10.11.3

  1.3 photos

  iMac (24 inch, early 2009)

  Based on examination of a small percentage of the total number of deleted duplicates, Photos seem to be taken of intelligent decisions on how to remove duplicate.

  I noticed similar symptoms.  When I import a picture that is a duplicate of one already in my library of Photos, both copies will share the same original image file in the folder of masters. Photos allows you to import duplicates, but will store only one version. This makes it almost impossible to replace JPEG corrupted by the restored versions of a backup.

  You can watch iCloud checking for duplicates while you download new photos. Launch the Console.app and look for the process 'photomodell '. You will see many entries like this:

  

• Delete the folder of recovery on Satellite L300D

  Hello!

  For the error I deleted file recovery on the second drive and now when I try to retrieve the full Windows operating system to its original state, I get the following error: the recovery of the operating system is impossible! Could not find file recovery HARD drive on the second disc of the first hard drive.

  I still have the Eisa partition intact, I think that the backup is located on this partition, and just the installation folder is missing.

  The exact model is L300D-10U.

  Help, please.
  THX

  Hello!

  If you have deleted the recovery file, you cannot recover your laptop, this is no longer possible.

  In the user manual is the following information:
  > If the preinstalled files are corrupted, use the product Recovery DVD-ROM to restore

  If you created the recovery disc, you can restore these files. If you didn t this and want to find your laptop, you need a new drive.
  You can get this drive to an ASP.

  Good bye

• name of file is damaged and I can't rename or delete the

  I'm on a MacBook Pro OS 10.11.2.

  I use Carbon Copy Cloner to backup over a year with no problems.  She always did exactly what I expect from him and I don't know how it is related to this problem, but it is the program that revealed the problem.

  I ran a CCC backup tonight, and for the first time, I got a message saying that it had been a mistake.  I watched the news and he said that a mistake had occurred during the transfer of a file.  The file is buried several folders deep on my desktop and so far it was still named "10/12/94.  However, the file has now acquired the name "10/12/94␀ [email protected] ␀Re 4 '-it now contains special characters and it may contain invisible special characters as well.  (Note that the file is a text file of email, so the "[email protected]" in the corrupted name is probably the beginning of the e-mail address of a message in the file).

  I don't know what caused the change of name - if just CCC discovered or that it caused the problem.  I ran my last backup 6 days without any problem, and I not did something weird to my computer since then.  The file that causes the problem is that I haven't looked over the years, and I was not in four or five levels of this Bank, since I copied it on my computer from my old laptop.

  I tried to delete the file from the finder, and I get a message that "the operation cannot be completed because an unexpected error occurred (error code - 50)."  I tried to rename the file from the finder, and any new name I type, I get a message that the name cannot be used.

  I tried to delete the file from the terminal with rm and I get an error "Invalid Argument".

  I tried to delete the file using the Recycle Bin option in the utility application of Onyx, and I get an error "Invalid Argument".

  I tried to delete the file using the trash it! request for utility and I get an error "Invalid Argument".

  I also tried all of these options of deletion on the record encompassing both, and they all fail in this case.

  I ran disk on the drive utility and it found no error.  I also ran check disk of Onyx and it found no error.

  I tried a variety of Google search terms and I have tried many different suggestions that came, but nothing has worked.

  Anyone have an idea how I can rename or delete this file?  After performing backup of tonight I have it now on my laptop and my support.

  Thank you.

  Have you tried to change the protection on the file? This can be done from the finder with "Get Info" or from the command-line if you are savvy of Unix. Give you access to R + W and try to rename or to delete again, you choose.

  In addition, if the file is located on the boot disk, boot from the recovery partition and run the tool again to drive from there.

  Kind regards

  Trauts

• nilibddc dll: opening files tdms with the corrupt index files

  Hello

  I have a question about the error handling when using the nilibddc.dll.

  I want to use nilibddc.dll to open the .tdms file. At the time I experimented with some error cases and got stuck in a case:

  When I try to open a file with a corrupted file .tdms_index .tdms I get code error-6211 (DDC_StorageCouldNotBeOpened).

  The file .tdms_index is corrupted due to errors during the copy of the file.

  The problem I've noticed is that I have a lock on the corrupted file .tdms_index file after DDC_OpenFile (...) (I can rename it, but I can't delete the file!).

  As you can see in the code snippet - it is not really special...

  int ddcError = 0, length;
  
  DDCFileHandle	file = 0;
  
  ddcError = DDC_OpenFile (file_path, NULL, &file);)
  Here, I get ddcError is-6211
  
  If (ddcError == 0)
  
  {
  
    do something with the file...
  ddcError = DDC_CloseFile (leader);
  If (ddcError == 0)
  
    {
  
      < "no="" error="" -="" everything="" done"=""><>
  
    }
  
  }
  System ("pause");

  I miss something here? Should I use DDC_FreeMemory in somehow to free open handles?

  I also tried to use the DDC_OpenFileEx (...) with readOnly set to true. But that doesn't change anything!

  Thanks in advance for the help,

  Daniel

  You are right. The sample file you attached to your message causes an access violation. If no normal flow program and apllication in undefined state.

  I will direct the file to developers. I tried to generate a file that causes the same by beating some index files, but has failed to create one on my own. It happened to your site more than once?

  What can we do?

  In the first place, simply copy the PDM. The index file will be recreated when the file is accessed. What is lost when the index file is not copied, therefore the time required to create the index file by scanning once the PDM file.

  I hope this helps a little

  Andreas

• TDMS-2503 error recovery - delete the index file does not

  My team worked an acquisition of data on some test machines, and I went today to begin the analysis of the data.  It turns out that two of the TDMS files that we generated cannot be opened in Diadem, Excel or use the controls file TDMS Opend in LabVIEW.  I also tried the repair of PDM tool, with the same result.  The test machine has since been demolished, so there is no way to re - run tests.  Is it possible to have the files was looking to see if all the data can be recovered?

  The files were generated with LabVIEW 2013 SP1.  Attemtped to open them in the same version of LabVIEW, and Diadem 2015, and the importer of excel (excel 2010).

  TDMS files are rather large (> 1 GB), but the tdms_index files that were generated with them were 0kB.  Delete the tdms_index files and re - open the TDMS files had no effect.

  A first look into files (using the primitives to open the binary in LabVIEW), the initial section of the appearance of correct files (readable metadata that matches from a work file in a non-working file).

  He seems to have no notable connection between the two files that will not open, nor the differences in the situation of these files for work files.

  Any help would be greaty appreciated.

  TDMS files are written in chuncks.  At the beginning of each chunck belongs to the human readable semi which is data such as channel names and groups, but contains no actual data.  Then follows the binary data.  The index is intended for all semi human readable file and any data.  This should make the reading of the file easier because the file offset and such are in the index file smaller.

  This being said if you have some sections corrupted in your DDHN file you can always get the data out of it.  There is a code floating around that pull each of the segments and find out what is the problem, then all allows you to get all the data before the wrong section.  This thread talking about it, and a short code displayed around page 3.

  http://forums.NI.com/T5/LabVIEW/corrupted-TDMS-file/TD-p/2165954

• Cannot delete the cDaq MAX devices

  I got a new device cDaq today and plugged into pc.

  It appears in MAX as cDAQ4 as I have already had 3 more before all shipped to a customer.

  The question is how can I delete the old ones on MAX.

  If I choose to remove by a right click or button on a panel of MAX, he asked me if I would like to remove it but nothing happened after that.

  I could remove devices in a chassis in this way, but not the frame itself.

  I tried to restart MAX after that and the devoces are still there. Did not attempt to restart the PC again, but don't think it would help.

  What is the solution of this problem.

  Hi Sergey,

  Is - this never happened to you before? What version of MAX, DAQmx and which OS are you using? If it's Windows XP, have you recently installed a Service Pack? Here are a few steps you can try:

  (1) open the Task Manager and ensure that there are no running LabVIEW or VI applications, that is sure to try to communicate with the device (although you would your cDAQ unplugged from your PC in any case)

  2) go to add/remove programs in the Control Panel, down to National Instruments software, click on edit, select the DAQmx driver and click on repair.

  (3) then try to remove the cDAQ, it can work.

  Otherwise, it could be a corrupted Max database, in this case you can follow the steps described in the following KB that you will guide them in creating a database MAX: How can I clean corrupted MAX Database and start with a new One?

  Please let me know if one of these help to solve the problem.