Similar Questions

• schedule meetings with the TMS and CTManager on the same endpoint

  Hello everyone

  I explain my problem, we have a CUCM with CTManager to plan meetings of the CTS, we have 2 VCS with a TMS to plan meetings of TC endpoints also.
  Our TC end points are saved in venture capital using H323, recorded in CUCM using SIP and exchange of email to can program using the CTManager. And TC endpoints are supplied by our TMS.

  As endpoints of TC may appeal to the endpoints CTS sometimes we have meetings planned between TC and CTS endpoints in the CTManager, but if schedule us a meeting by using the TMS, meetings of CTManager disappear and endpoint show TMS meetings, if we do a resynchronization of the electronic mail room in the CTManager We can see again in the meetings of CTManager in the touchscreen.

  We tried not to allow bookings for this endpoint of TC in the TMS, but later there is no way to schedule a meeting for this endpoint, even using the external call.

  You know any workaround solution to activate the two calendar options running on the same endpoint without removing the CTManager meetings? We don't need the BBFRR for the TMS meetings, only for meetings of the MLC.

  Best regards

  Hello

  Disabling power of the TMS write calendars 'Meetings' on managed systems is not supported. If an endpoint is added to the TMS, TMS assumed that endpoint is not used in another system of planning (such as CTS - man) and could replace any parameter that depends on the other system of planning.

  Kind regards
  Kjetil

• Purge schedule on the TMS/TMSXE

  TMS is 14.3.0

  TMSXE is 3.1.2

  We gave up on the recording of our telepresence on the CUCM, we work to keep away them from the CUCM and their inclusion in the VCS - C (see here). But when you remove the CUCM non-registrant endpoints off the TMS and add it as registered endpoint C - VCS, TMS causing problems on all scheduled meetings.

  After the now the rebinding VCS - C saved telepresence endpoints for room calendar changes in the TMSXE, it

  1. Add the 'new' (actually modified) end for the calendar of meetings
  2. maintains endpoint (previously saved CUCM) former listed as a "shadow" unknown endpoint
  3. clear the multipoint resource MCU/TP server allocated meeting
  4. send an email to the host of the meeting, saying: "information your administrator is migrating to a new system of conferencing reservations." During the migration, your conference was made. Cautions due to limited resources of routing, automatic routing could not be set up for your conference. A participant dial-in/out external added to the call is not connected. To ensure that the Conference will connect and the delivery of resources are available, contact your administrator to videoconferencing. Road is not valid.

  But all meetings are internal, and there are many resources available on the telepresence Server

  I wonder if there is a way to solve this problem and what we should do. Is there a way to purge all the TMS meetings so that the TMSXE re - synchronize all the information meeting of the TMSXE.

  Hello

  There is unfortunately no history of migration in TMS between a CUCM-centric and a deployment centered on VCS. If you make a change like that, you essentially need to manually update all future bookings.

  Kind regards

  Kjetil

• Automatically deleted from the storage of the DSO after data files using the command cp ASMCMD... why?

  I installed Oracle database on Linux 6.6, Virtualbox 11.2.0.1.0.

  I used ASM for database storage.

  When I want to perform a backup in offline mode. I stop the database data files and copy to the filesystem as follows (for example).

  ASMCMD [+] > cp +DATA/ora11g/datafile/system.270.883592533/u01/app/oracle

  The files copied with success and also any other data files, logs and controlfiles files. Then, I also rename all the files in editing mode.

  After that, I used the backup files to start the oracle of backup (storage non - ASM with new pfile edited)

  Open successfully from a backup database.

  But when I want to use old spfile to open the database for the storage of the DSO again, a few errors have occurred as no data files in ASM storage.

  I check the contents of the ASM storage with ASMCMD commands. And realize that there only spfile and controlfile located ASM storage and other files: data files and online redo logfiles automatically deleted.

  Why the data files and log files deleted ASM storage? Is this normal? I have no delete all files of the DSO.

  It is actually deleted from the use of the cp command?

  Exactly what we say.  Data in ASM files are OMF (Oracle managed files).  The RENAME translates the DSO by deleting the original file.

  Hemant K Collette

• Why did you move the button Delete in the messages pane?

  You play with my muscle memory! V38.0.1

  Who took me out a few times as well.
  I discovered that if I customize this area of the toolbar and put a space between "delete" and the buttons 'More', in some way I read that space as the end and it kept me acidentally hit 'more' when I went to "Delete".
  I know that this is only a workaround, but it is solved my problem of finger, then perhaps that this idea could help you.

  In the message header area where it shows these buttons: "answer, transfer, Junk, delete archives, more '."
  Right-click on these buttons and select "Customize".
  a 'customize' window will open.
  Drag and drop the icon of 'space' between 'delete' and 'More' buttons.
  (I actually try the dividing line, but found the space worked better for me).
  Click 'Finish' to close the window.

• SX80 CE8.2 remove the button from the Touch10 meetings?

  The old API was a command:

  xConfiguration video OSD TodaysBookings: Off

  who deleted the calendar of meetings for the reservations that are defined in the TMS.  I need this feature.  "User has" should not be able to see that 'User B' has a next meeting. A custom background removes the overlay "Todays meetings" of the screen on, but 'Encounters' on the Touch10 button still shows future reservations.

  According to the guides API for software CE, the configuration that you mention has been removed.

  An alternative is to use: xCommand clear reservations.  However, once you plan what in the TMS, it will send that reservation to the endpoint, and the meeting icon will reappear again.  Right now, there is no way to remove the icon from the 10 touch.

• I do not agree to the Match, so why are my songs loaded remained stuck with a cloud of dots, indicating that they are being put in correspondence (and I can't access it?)

  Hello - I've subscribed to the game, in order to have my library is available with several devices.  I also had a lot of songs to convert from vinyl but 128 Kbps.  I hope that the game would IMPROVE those at 256 kbps AAC.   It didn't happen, and so I left my lapse of a year subscription.  Now, most of the songs in my library always show a dotted line Cloud icon, indicating that they are evaluated for the match.   Why?   And, in this situation, I'm not able to access (play, download, move to the playlist, etc.) these songs.  Once again, why?   What Miss me?   Thanks in advance.

  Hello

  This suggests that the tracks were not on your hard drive when you remove match. Did you delete the originals so you can stream from the cloud? You save the originals before signing up?

  Jim

• FlashGot suddenly causes FF hang after closing. Takes about a minute to stop the execution. Why?

  During 2 days, I noticed that FF does not close the output. The process continues to run for about a minute, using up to 100% of my resources. After the suite Mozilla troubleshooting guide, I found the culprit to be Flashgot. I can run ALL my extensions and plug-ins and don't have this problem. But at the point where I have activate Flashgot, this problem occurs. What is strange is that I've been running FF and Flashgot for a year with no problems. Even after updating both versions the latest, everything was fine. It was only a problem in the last 2 days. In addition, exactly the same thing is happening on my wife's Office, as well. Once again, that in the last 2 days. I tried uninstall/reinstall the two FF and Flashgot, but to no avail. What is going on?

  Create a new profile and delete the old one seemed to solve the problem. Why the problem occurred in the first place is beyond me. But after creating the new profile, restore all my favorites and reinstall Flashgot, everything seems to be a behavior wonderfully. For anyone else having similar problems, I recommend that you create the new profile. It is easy to do, as long as you save your old, then you can copy all of the files required to restore your preferences and bookmarks.

• After you download Firefox 4, my Google toolbar has disappeared. The new F4 page has no opinion, etc. to tools at the top. WHY I would risk this again by accepting the invitation to download 5?

  After you download Firefox 4, my Google toolbar has disappeared. The new F4 page has no opinion, etc. to tools at the top. WHY I would risk this again by accepting the invitation to download 5?

  Changes in the toolbars:

  I don't like the changes made to the user interface either, rather than to save toolbar space, they would have much more space with 1/10 the functionality. But the important thing is that it's Firefox and you can customize things yourself. Your complaints about the Firefox toolbars are the top 10 items in what follows and they are quickly fixed.

  You can make Firefox 5.0 looks not like Firefox 3.6.19, see numbered 1 to 10 points in the next topic difficulty Firefox 4.0 UI toolbar, problems (Make Firefox 5.0, or 4.0.1 resemble 3.6). If you make changes, you must be aware of what has changed and what it takes to use changed or missing features.

  • http://dmcritchie.MVPs.org/Firefox/Firefox-problems.htm#fx4interface

  hostage to the third party toolbar:

  Why you would bind your use of any third-party toolbar browser, which was never really necessary, and even less be hostage to not update to Firefox. Google has had over a year to update their toolbar for Firefox 4 and changes for Firefox 5 could have been tested for several months. Google has waited very long before for finally stating that they would maintain is no longer their toolbar for Firefox, claiming that it was not necessary, and that the items were in Firefox. Also be aware that the features are also in their own browser that also do not need or use the Google toolbar. Not only is Mozilla open source, but all the information is available to anyone - you can even listen online meetings yourself or wait for a printed reviewa.

  There is no change to the user interface of Firefox 4 to 5 and probably even not through Firefox 7

  Life without the Google toolbar:

  You can read this article, on the basis of assessment of own Google features were already in Firefox and expanded from there.

  • http://KB.mozillazine.org/Using_Google_Toolbar_features_without_toolbars

  Kicking a dead horse:

  The Google toolbar is no longer supported by Google in Firefox 5 and more ', you may be able to get what you want from him for a limited time, the instructions to install the Google toolbar have been posted before that Google has actually announced a fall support.

  • Activate the Google toolbar in Firefox 5
    http://GoogleSystem.blogspot.com/2011/06/enable-Google-toolbar-in-Firefox-5.html
  • The-edmeister published a brief assessment of the situation
    https://support.Mozilla.com/questions/841736

  Please mark solved the problems, so based on the best response to your posted question that solves or helped you to find a solution.

• I deleted my phone after the backup of photos were also deleted from the computer and iCloud

  I have an iPhone 5 and after upgrading my phone and transfer pictures, my computer screen went to sleep while he was removing all transferred photos off my phone as I walked away. When I went back and opens the screen, deleting was stopped, and even if I tried to have the iPhoto to delete 517 photos that were transferred, it would not be. So, while my phone was still connected to the computer, I scored manually 88 photos on my phone, following on the computer, ensuring that each photo that I retreat the phone had been transferred to iPhoto. Then, I went in the "recently deleted" on my phone and deleted those as well, so they do not take place. When I got back to the computer for the next round, I realized every photo that I had just deleted my phone also disappeared from iPhoto! I even checked iCloud and they weren't there. How can I recover these 88 pictures I deleted from my phone and why the hell did remove it from the computer?

  Any help would be appreciated. Thank you!

  Note: My operating system is OS X El Capitan 10.11.3 / / iOS on my iphone version 9.2.1

  iPhoto or the new Photos application on your computer?

  Note that if you have settings > iCloud > iCloud library enabled in your phone and if you have the menu Apple > System Preferences > iCloud > Photos - Options > iCloud library enabled in your Mac, all the photos you delete phone, the Mac, or directly on iCloud will be removed from all 3 places. Intend to iCloud photo library must synchronize all your pictures on all your devices and iCloud. More information on iCloud Photo library FAQ - Apple Support

• Photos deleted from the Photos app after importing and deleting off iPhone

  As the title says, today I was importing my photos and video of my iPhone for free space and to save my photos of my MacBook Pro. After everything has been imported, I deleted all the photos from my iPhone. Began shortly after the deletion, all the pictures I imported "up-to-date" and by removing themselves from the Photos app (on the macbook) and the iCloud photo library.

  I'm a bit frustrated because it was the exact opposite of why I import me my pictures and video on my computer. What is happening and is there a way I can retrieve media? Thank you.

  iCloud photo library has a single purpose - to share a library among multiple users to keep all the identical libraries so nothing added, it is added, removed or modified in a deleted or changed in all - it is a solution for streaming to the synchronization of all libraries - it is not a backup or a place to store a part of a library

  iCloud Photo library FAQ - Apple Support

  deleted photos should be in the album recently deleted and if you select them here and right click and replace what they should go back to where they were

  LN

• How can I retrieve expression 3.0 files that have been deleted in the breast of the program?

  In trying to change a Web site, we have open Expression Web 3.0 and tried to import an exixting site so it could be run on the new computer.

  The pages of the Web site were placed on the desktop. When expressions opened the files on the office filled the list of Expressions of pages.

  We have removed the pages we didn't need in the site, but some pages were outher things in the office and when we removed the sit expression seems to have deleted from the computer as well.

  We tried to recover the documents making it in the trash and pulling outwards deleted things, we needed, but these documents and records were not in the trash.  In addition, some of the files that did us find on the desk not can be opened when we clicked on them.

  Why are they all elements does not appear ransacked so they coluld be restored from that?

  Why can't we open files where we found them, except it says the program designated by the shortcut cannot be found.

  You can help us to recover these important files?

  Thank you. Mother of Tara & of Tara.

  Hello

  I suggest you to send your requests in Microsoft Expression Forums for assistance.

  Here is the link: http://social.expression.microsoft.com/Forums/en-US/categories

• Event Viewer Windows 7 'Administrative events' can not clear the log? Why and is there a solution?

  Window 7 has many error logs in the "Event Viewer", but all seem to have the ability to "Clear log" except the Administration? Why? I looked at some of the entries, and they you are referencing my "security cameras" this automatic restart after a power/Brown power. Yet I have not found a way to "clear a log this ' under 'Administrative events?' Is there a way to clean this newspaper? It's more than 1100 events, and none are major.

  Thank you

  Hank

  Hank

  Delete all log files, including the journal of the administrator combined, by running this command as an administrator file save it to the desktop and right click to run it. The link is here http://www.sevenforums.com/tutorials/25480-event-viewer-one-click-clear.html?ltr=E

• Smartphones from blackBerry BES Question: when emails deleted from Outlook/exchange inbox why not email get removed from BB?

  Is - this b/c, the Exchange is only 'forwarding' mail for BB, do not receive any communication in return? But then why can the BB delete an e-mail message at the same time the BB device and the exchange server (if this option is selected)?

  I really need the BB to update the same as my Inbox with my exchange server, I will not be a happy camper if it does not recognize the emails that I moved into or deleted from the outlook/exchange Inbox subfolders, as my old Treo did... Is there some setting I am missing?

  Or is this what work of BB?

  Well hallelujah, is a tech BB saw my post and fixed a few BES script, or, I solved the problem by changing the setting in the options to "HIDE MESSAGED after HAVING REMOVING", I think it's the only setting I changed and I don't know if fixed it or not, but its not working as it should now.

• Developer Mode error: outdated., the xxAM.xxVO1 view object contained no trace. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  Hi all

  I'm creating a Maunal search page.

  To do this, I created a view based on a custom display object.

  Page contains 2 parameters.

  If I give all settings and click the OK button.

  It gives the following error.

  Developer Mode error: outdated data

  
  

  This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.

  
  

  Cause:
  The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.

  If I don't give any parameter and click go Button.The content of the view are displayed.

  So if I pass all parameters and click Go, then the corresponding record is displayed.

  Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?

  Please help me.

  Grateful for your help!

  -Aren

  You use the object of the view for the search criteria and search results fields.

  I suggest you to remove references of VO fields of search criteria, item1 and item2.

  And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.

  String buCode = pageContext.getParameter ("item1");

  String lsiCode = pageContext.getParameter ("item2");

  Thank you