deleted printer USB001 and USB003 port... help!

Similar Questions

• Cannot print with hp psc 1300------tried to delete print queue and it showed that the "deletion" for more than 24 hours

  my daughter tried to print out a list and it printed a page, then sprayed upward. We tried of the deletes the remaining queue, and the State showed 'delete '. It is on this status since yesterday, I can't print.

  I rebooted and off voltage & power of taking off. I don't know what else to do. Help :-(

  Thank you

  Hello

  The operating system that you are running on your machine?

  Follow the steps in the article below and check if it solves the problem:

  Print jobs are stuck in the print queue and Will not print using a USB connected product
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c00843712&lang=en&cc=us&TaskID=135&ContentType=SupportFAQ&prodSeriesId=306884&prodTypeId=18972

• printer says: "command error, processing" and will print on "restart", or "will it delete what is on the reel-Help?

  All printed on July 20, 2011, but not July 21, 2011, so I did a restore of the system to 17 July 2011 and she removed only a 'Pause' on the printer, but not this following error message: printer says: "command error, treatment" and will print on "restart", or "will it delete what is on the reel-Help?

  1)

  Start > type services.msc

  Scroll down and click on print spooler

  Click on stop the service

  Click Start the Service

  Close the window

  Go to control panel > open the Printers folder

  Right-click on the printer, and then select open

  The documents are displayed in the queue?  If they are, click on the printer and select Cancel all Documents

  Close the window and restart the system

  2)

  Uninstall the printer software/driver

  Restart the system and install the software/driver

  Update driver software

• B9180 printer on and offline cycles have tried to delete and then re-add printer

  MacPro.  Software up to date.  B9180 line offline cycles.  USB connection.  Have you tried to delete and then re-add printer, did a power reset on the printer.

  After these steps, a photo will be printed, and then the trash again.

  Help

  I don't know if the hub is the reason or not - but a powered hub is the better of the two options in the case of a USB connection.

  If it was me, I connect the printer (temporarily) and remove the hub of the mixture just to see if it is the cause or not. If this isn't an option, what to connect to your home via ethernet and withdrawal/re-adding network as a network printer?

  Remove the hub of the equation is just standard troubleshooting - get rid of the 'intermediaries' so to speak. Factors less in the equation, it is easy to sharpen the first cause (ideally the narrowing down to printer hardware or software of the computer/workstation). From what you have said so far, I doubt very much that the mac or the mac software is the issue. However, we need to refine the material until we can find the component that is causing the problem.

  Other things to try to understand:

  -Try a different outlet (remove the outlet, as the question)

  -Try a different power cable (eliminating the feeder as the question)

  -Try a different cable USB (USB cable like the question to eliminate)

  -Try another port on the USB hub powered (port currently used on the hub so that the question of eliminating).

  Because of the limitations of distance, looks try an ethernet configuration could have the least impact on your configuration, because the ethernet connections do not require a Repeater cable up to 100 m distance.

• Printer does not print after canceling a print job even if I deleted the queue and stop the printer and the computer.

  Re Vista - printer does not print after canceling a print job even if I deleted the queue and stop the computer and the printer and restarted.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• My dell printer and Windows 7 help

  I recently installed Windows 7 a update my windows vista and I have a dell printer AIO 964 that I'm unable to download the driver. Help, please? I'm not savvy computer :)

  LeilaniBorne,

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Start, Panel, programs and features, your printer, uninstall

  Restart your computer. Make sure that the printer is deleted. Deleting Manual printer driver

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to drivers to...

  Dell 964 Photo-All - In - One Printer owners thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• I deleted my pictures and videos to free up space on my iPhone 6, but the settings and iTunes still say that I've not left storage. Help, please.

  Hello

  I have an iPhone 6 and uses iOS 9.3.2,and I recently deleted all my pictures and videos to free up space, "Manage the storage" in still however said circles I 23.4 GB of photos/videos like iTunes when I connect my iPhone to my Mac. I deleted my recently deleted folder and follow the instructions of a guy showing a year, which suggests to set my phone date about two years back and deleting the photos recently deleted the file and both of these solutions do not work. I have reset my phone (home and power button operation / stop) and also, it does not work. I don't want to wipe my phone and restore it if possible, but it's the only option I can think of next.

  Are there other solutions before I try this?

  Thanks in advnace

  Ben

  Hey Ben,

  Thanks for stopping by the communities Support from Apple! Looks like you are trying to free up space on your iPhone by deleting all the photos and videos, and you still see 23.4 GB absorbed by these files. You have already made sure to empty your recently deleted album, fix the date of return on your phone and performed a hard reset on your device. You did an excellent job so far, and I'll be happy to give you some ideas to move forward from here.

  Before diving into other troubleshooting procedures, it would be useful to ensure that you have a recent backup of your iPhone is available. This will help us ensure that all your important data is stored safely for you. Here is an article with information on how to backup your device:

  The backup of your iPhone, iPad and iPod touch

  Once it is in place, I recommend you to reset the settings on your phone. This is not the impact of your personal data, but you will have to perhaps adjust the user specific settings, but also re - enter passwords and Wi - Fi networks. To complete this step, go to settings > general > reset > reset all settings. When you restart your phone, check if the local storage on your phone has updated to reflect the changes you did related to your photos and videos.

  Beyond that, you want to look at your phone erase and reset to the factory settings. It is possible that some kind of software corruption causes the divergence of storage that you are experiencing. Set up your phone as a new device via iTunes install a new copy of iOS and also to exclude the corrupted files, etc. in your user data. This is a resource for this process:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  For later use, it may be useful to use iCloud photo library to transfer and store your photos. There is a feature that allows you to optimize the storage on your iPhone so that your photos and your videos do not have as much local storage space. Check out this resource to learn more about iCloud photo library:

  iCloud Photo library FAQ

  Have a fantastic weekend!

• Hello.. I've forgotten the answers to my security questions... I do not have the chance to remember the... What can I do now? No idea how delet old questions and put the new ones? PLEASEEE help me

  Hello.. I've forgotten the answers to my security questions... I do not have the chance to remember the... What can I do now? No idea how delet old questions and put the new ones? PLEASEEE help me

  Hello

  If you set an alternate e-mail address, you can reset your security questions. Follow the instructions here to check if this option is available:

  If you forgot the answers to your questions of security of Apple ID - Apple Support

  Otherwise, you will need to contact the Apple Support. The information is available here:

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• Someone can help me when closed Firefox randomly it deletes all cookies and cache, and I'm not able to restore the lost tabs...?

  For some time now, Firefox stopped randomly for unknown reasons. Sometimes, windows reports the error, but not always. When I launch Firefox upward once again, it does not restore my tabs. Also as a bonus, it deletes the cookies and cache, and I don't know why. In addition, this event became more frequent. Just in the last hour along before writing this complaint, Firefox crashed three times that I have change user, but not every time I went. I'm a taboholic, addicted to the tabs, sometimes 70 +, and it's the final straw. This frequency became more important a few days ago. When it crashed first, Windows has had enough let me know the error first one or two weeks ago. It has become the scourge of my internet browsing very. Someone please help, or I have to renounce my allegiance to Firefox and switch to the dark side which is Crome.

  ... or I have to renounce my allegiance to Firefox...

  There is no oath of citizenship involved by the use of Firefox, it's a piece of software.

  Look, if Firefox is not generate incident reports, more likely to have an operating system or a hardware problem. If Firefox generates incident reports, you can retrieve this information and display numbers report here.

  https://support.Mozilla.com/en-us/KB/Firefox+crashes#Getting_the_most_accurate_help_with_your_Firefox_crash

  Type of Subject: hangs in the URL bar and press ENTER.
  Click on the hyperlinks to display the pages of the Crash report and copy' only paste the URL of each of these reports in the message here box. Let's see if we can help figure you out what is causing those who fails to happen.

• Cannot scroll to delete several email messages-just one at a time and very slow-help?

  MacBook

  10.10.5 Yosemite

  Can not hold the command to scroll down and delete send several messages, just one at a time and VERY slow-help?

  If the emails are side by side, select one, then hold down the SHIFT key and select the last one. Hold the command key and clicking on the individual emails should work. What happens when you try?

• I filled my printer with an hp1200 cartridgeworld cartridge and now the printer always says "check printer cartridge? any ideas help please

  I filled my printer with an hp1200 cartridgeworld cartridge and now the printer always says "check printer cartridge? any ideas help please, PS is not the first time I used these cartridges, but this is the first time I had no problem

  Hello

  Follow these steps and check if that helps:

  Method 1:
  Try to run the printer Troubleshooter and check that if it helps, here is the link:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:
  Try to run the below fixit and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  It will be useful.

• With the help of old Windows CD to install the optional component deleted Outlook Express and I need to get it back!

  We have received a Windows XP laptop from a friend and use Outlook Express for e-mail. We had a number of other things such as pilots with the laptop but not the Windows CD.  Then we wanted to reduce the size of a jpg image and I wanted to use MS Photo Editor to do what I then read on the Microsoft site that I could get by installing from any Windows CD.  Therefore, I used an old Windows XP CD from another PC, choose to install an optional component and chose as accessories to the next screen, ensure that all other options were struck down, assuming that so they would simply not be installed.  One of them was Outlook Express and Internet Explorer.  Instead of THIS the wizard DELETED Outlook Express and Internet Explorer.  When I tried to get him back by checking these options, asked me for the 2nd day of the original installation CD - which of course, I did not!  I have managed to re - download IE8 from Microsoft Download site, but of course do that for Outlook Express - and we don't have Office on this computer: (.)  Help!  (a) is it possible to reverse this process to remove/uninstall Outlook Express? (b) we now lost all our emails? (c) I already tried to go back to a previous good configuration, but that has not worked.

  Thank you in advance for advice, answers or help.

  First, make sure that OE has actually disappeared.  Go to start | Run and paste this and see if OE starts:

  "c:\program files\Outlook Express\msimn.exe".

  Including the quotes and see if OE starts.  Very often "withdrawal" OE removes just the shortcut to it.

  If this does not work, you can try reinstalling XP SP3 (http://windows.microsoft.com/en-US/windows/help/learn-how-to-install-windows-xp-service-pack-3-sp3), but you should probably uninstall IE8 first and then reinstall it later.

  You can also go to the c:\windows\inf directory and locate the msoe5.inf file and right-click on it and choose Install and see if that fixes things.

  See if that works.

  Steve

• Windows XP SP3 - Outlook Express receives and sends mail but do not delete received messages. Can you help?

  Windows XP SP3 - Outlook Express receives and sends messages, but do not delete received messages.  Can you help?

  You have corruption of dbx files.
   
  Spend most of your messages out of the Inbox and move the messages you want to record off deleted items, and sent items. Locate the OE message store and then close OE.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the Deleted Items.dbx and Sent Items.dbx files and delete them. New files will be created automatically when you open OE.
   
  Compact all folders as described below.
   
  To avoid this in the future:
   
  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.
   
  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095
   
  After you're done, followed by compacting your folders manually while working * off * and do it often.
   
  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.
   
  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

• Error 0 x 00000709 when you try to delete the print job and/or pritner.

  Original title: error 0 x 00000709.

  I have a dell laptop running windows vista Home premium SP1 with a 64-bit operating system.  I tried to remove a printer HP 1310 on my computer and it is stuck on "suppression of 1", I stop, then restart the printer spooler and now I have error 0 x 00000709 when you try to delete the print job and/or pritner.   What can I do to remove this printer.   I installed a Canon MX330 printer, but due to the printer HP being locked, I can't print with a PictBridge compatible printer.

  Hi LauraD,

  You can try to remove the printer from the safe mode and check.

  Step 1:

  You can read the following article to start in safe mode:

  Start your computer in safe mode

  Step 2: Remove the printer.

  You can read the following article to remove the printer.

  Add or remove a printer

  After deleting the printer, you can start in normal mode and try to install Canon printer.

  Hope this information is useful.

• I need serious help please... We do translations of textbooks, I searched an excessive type function but have been unable to find, we are working in indesign CS 5. It takes allot of time to delete the text and type in the new language.

  I need serious help please... We do translations of textbooks, I searched an excessive type function but have been unable to find, we are working in indesign CS 5. It takes allot of time to delete the text and type in the new language.

  Argh it's frustrating! I never noticed that the key was not working in InDesign.

  A bit of research and it turns out that the MS Office has this as an option in their software. But I can't find an option in the InDesign preferences to make it work.

  However, somethings do not appear in the shortcuts and preferences and are hidden triggers in InDesign that are accessible via a script.

  I'm not saying that it is possible to activate the button insert by using a script, but it is plausible that he can be activated.

  Maybe ask on the forum script? Scripting InDesign

  I know that this may be a possibility as with InDesign prior to export PDF documents interactive versions, there was previously no way to export PDFs interactive as unique pages if the gaps of.

  But the option to toggle this setting was scriptable.