Deleted the drivers! Help, please!
I had not used my old laptop Alienware M17x R4 for some time and there were a bunch of junk on it I didn't need and the computer is slow, and it could be a virus on it. So, I decided to do a cleaning of the computer one night later. I read a guide on how to do it and I reinstalled Windows 7 Home Premium with save or save the old unwanted files. When asked which driver to install Windows on, the guide was ambiguous and a mixture of fatigue and dyslexia led me to remove all the drives except the DATAPART (c :)) driver which has 29.8 GB of storage. I now have those 29.8 GB of storage and not the 1 TB driver that is on this computer. All graphics and video cards have been lost and I can't even connect to the WiFi on the PC.
What I tried:
Reinstall the driver updated the Dell Web site
Restore the computer to factory settings (I can not, I do not have the storage)
Is there anywhere I can download and install the drivers, I need or my computer is just screwed?
I don't know how to solve this problem, I know it was a terrible mistake, but can someone please help
1 you seem to have misspelled readers and/or drivers as long as it is not possible to be completely sure what happened & what is the current situation. Check and correct your post so that people can help you better.
2. If you have installed Windows 7 on a disk of 29 / GB in your computer then "partition" has probably stored files Dell Factory Image Restore [DFIR]. This would explain why, you can't run now that the easy, but your comment, I have no storage is meaningless to me.
- You could have supported DFIR to a USB port, but not many people take this precaution - do you have?
- You may have a Windows 7 reinstall drive provided by Dell with your computer - do you?
- What did you use to reinstall Windows 7?
3 I don't know if your computer has multiple hard drives in it, or if a single hard drive has been "compartmentalised" into separate sections so that each behaves as if it were a separate disk drive. It is essential to know because you or another
need to remove the installation of Windows 7 and then reinstall on a larger drive,
or
You must increase the size of the partition in the partition you installed Windows 7 on [to, say, 100GB]. Then you will be able to partition off the power then format the rest of the hard disk as a data reader to separate your own operating system data files [this is a very useful to have Setup].
Instructions for making these two things are radically different. Whatever it is, you will need a good amount of computer skills to perform the task, and you might be better to ask someone else to do it for you. You will need to use a partitioning tool [the built-in tool is called disk management , but many people prefer third-party tools such as Easeus Partition Manager]. The work is actually pretty easy if you know what do everyone you know who did this just before time would be able to do so or stand over your shoulder and will guide you.
4 on the hardware drivers - Dell has all the drivers you need. Just go to their website and enter the 'Dell Service number' that you will find on a label somewhere on your computer and in your purchase documentation. Reference Dell then you can download all the latest drivers for your computer [not only for your computer model but specifically for your computer]. Each update Dell will have a page of instructions, so we'll tell you how to install. While you are there, find the Dell support Web page called Driver install so that the desktop computers and laptops because the sequence of pilot facilities is very important.
Tags: Windows
Similar Questions
-
I reinstall xp on my toshiba laptop Dungeon wonders for SDBUS. SYS file that is not on the cd help please, I did once before without this problem
Please try to use different CD or simply remove the CD then insert again the installation request for the files.
-
I checked the print queue. I tried to delete the document does not have several times without success. There is no error message given. The printer is just the print requests in the queue with answer oout. Nothing will get the printer to answer. Help, please.
Try this procedure (Note: you must be an administrator to do so):
1. click on the Start button.
2. right click "My computer" on the left side, then select 'manage '.
3. click on "Continue" to popup security message that appears.
4. in the middle pane of the window that opens, double click on "Services and Applications".
5. double-click on 'Services '.
6 scroll to find "print spooler".
7. right click and select 'Restart' (Note: make sure that you have not opened during this operation the printer print queue window).
You should now be able to delete the print job (or it may have been deleted automatically).
Rifdhan
If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.
-
All the classic blackBerry sent emails deleted - can someone help please?
Can someone please help me quickly? As of today, any email I send is deleted as soon as I send it. I see sent and then once it is sent, it will be removed immediately.
I use Googlemail. Checking my account Googlemail online I see that the elements are not in sent items or Bin, but appear if I look at all points. (I don't know why they show here but not in the deleted items - is not at all helpful more.)
I checked my folder view settings / mappings and they seem to be OK.
I have not knowingly changed settings and tried to restart my phone. I have a classic BB running the most recent version of the operating system and am on the network Giffgaff on the United Kingdom.
I'm really at the end of my wits and finding it rather stressful.
Thanks to all who can help.
In case it might help others, thanks to some very helpful people and patient on the Crackberry for one I was able to cure the problem, which has been and is a fault with Gmail/Googlemail - well, it is sort of to halfway between a solution and a solution that we have never identified the cause says, but I have the functionality I need :
http://forums.CrackBerry.com/BlackBerry-10-OS-f269/all-sent-items-being-deleted-help-please-1048411/In short:
1. change my e-mail address for Googlemail to Gmail solved "items being removed", BUT
2. what he meant that the calendar was not recognized, so
3. I had to install the calendar manually on my BB using "CalDAV" and my OLD identity Googlemail (not Gmail).At least, it works so far...
I hope this helps someone.
-
I deleted the drivers of HP and my dvd/rw no longer works
I removed my 64-bit Windows 7sp1 computer HP drivers. Shortly after, I noticed that my DRV/rw not working. Recognozed of Windows in like the DVD-RAM Device Manager and it appears when I start the computer if I want to start from, but I can't boot from it and Windows cannot read anything on a disc that I put in the drive.
Unfortunately, I have more restoring the system when I removed the drivers...
I checked and you don't have any filter higher or lower in the registry.
I deleted the dvd/rw in normal mode and safe, but it does not solve the problem.
I bought an external dvd/rw usb that runs slowly, but it cannot start a disc if I when you restart the computer.
This can be corrected?
Hello Libra,
Please keep us updated on the status of the issue.
Windows vista is currently installed on your computer?
I suggest you try using the steps described in this article and check if it helps.
Your CD-ROM or DVD drive is not recognized by Windows or other programs
http://support.Microsoft.com/kb/314060Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756I hope this helps.
Thank you
-
I deleted the files (ntoskrnl.exe drivers system32\; hal.dll;) KDCOM. DLL, how to recover?
10/30/2010 12:19 AM, malenstwo wrote:
I deleted the files (ntoskrnl.exe drivers system32\; hal.dll;) KDCOM. DLL, how to recover?
There is no drivers, they are base operating system files and they are quite impossible to delete because they will be immediately replaced by the mechanism of Protection of Windows (WFP) files. Ntoskrnl.exe is the core, the heart of the operating system, how exactly would you have removed these basic system files?
John
-
I am trying to download the drivers for another program, and no tray will read the disk... it does nothing, as tho it is not even a disc in
Please click on the link below and follow the steps outlined on the page, this will solve the problem:
http://support.Microsoft.com/kb/314060
MD MOEEN AJAZ KHAN - MCP, N +, A +.
-
Original title: change file attributes
I'm updating some drivers help Driver Whiz from HP. The new drivers download but will not be installed. Apparently, I need to remove the read-only file attributes, but no matter what I do it continues to change the next time I have access to the file to read-only. Any ideas?
Hi keuller,
You can read the following article and check if it helps:
You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7
http://support.Microsoft.com/kb/326549
Hope this information is useful.
-
Windows will not start since the update :( Help, please
Windows could not start. a recent hardware or software change might be the problem
file\windows\system32\config\system
status: 0xc00000e9When I try to start the system restart that nothing happens
When I try to restore the computer to factory settings it says that the necessary files are not there.
My computer was working fine until I installed an automatic update from microsoft. Help, please
For any problem with the recovery of software/process to factory settings, you will need to contact the manufacturer of your computer.
This isn't their recovery process, Microsoft.Windows Update Forum:
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
How can I delete the browser history please
Cannot find a rope in order to delete the browser history.
See you soonYou can find this:
Menu > more > settings > Clear Private Data
(It's on a gingerbread device, but I am sure it should be under settings on Android 4 + as well).
-
Air the fan runs all the time help please
Hello
my air fan macbookbook just Can not stop, its rotation at high speed that I can't use my laptop comfortably
I tried to reset the SMC, but did not work it runs fast even before the charging system
I've included screenshots of istat cpu and sensors please take a look
any help would be appreciated
-
Hi, I bought 6 Iphon from another country and it does not work in the USA help please!
Hi recently I went to South Korea and I bought the iphone 6 in there and used it
And I'm back to try from the USA at the same use iphone 6, but it does not work with my verizon sim card
So I went to the verzion store to find the problem but they could also solved the problem
Can you help me please?
N ° do not use this phone on Verizon. Verizon is a CDMA carrier. It can be possible to operate on the Verizon LTE network, but they don't will not activate it on their CDMA network. Only unlocked iPhones they will activate on their network (excluding those sold specifically for Verizon) are the 6s and 6 s more.
-
Problem installing the program. help please.
Good day everyone,
I try to install iTunes. Here's the mesg: there is a problem with this installation package. A program required for this install to complete could not be run. Contact your personal support provider or packaging.
then a new massege appears saying: Installer a insuficient privileges to modify the file C:\Program Files\Quicktime\QTInfo.exe.
I also try to install firefox, but after I restarted my computer the icon become currupt saying the program was chnge or displaced.
even in ventrilio, he is a voice chat for online games. It will install, but after, the icon becom currupt or somethingand another problem I had is when I try to uninstall a program a message will appear saying: I have no Annie sufficient to remove or modify this option. but im in my admin account on my laptop.
I don't know what to do, I tried almost everything I know, even make F8, I tried to use: last known good config or repair your computer.
Please help me, I can't install anything in my laptop.
Thanks... x)
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads
Kindly forward your question in the correct Forum for Vista programs on the link above.
See you soon. Mick Murphy - Microsoft partner
-
Creating Windows dvd displays error at 99% of the finalization of the dvd - help please
Please help me... I've been using windows, create dvd with windows 7 a few months had no problems until recently an error appears almost 99% of the finalization of the dvd? Some days it works others it does not I need a program or a new burner? Finally, I brought on a model man, he says, a coin has been blocked in the slot dvd... but everything works fine just a mistake shows upward... what should I do?
It is possible that you may have hardware problems and
one or more of your source files may be incompatible
or corrupted.but by disabling all filters in DVD Maker
before burning the DVD can be worth a try...See the following articles:
How to burn DVDs with Windows DVD Maker
http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
(scroll waaay down for...) What to do in case of problems)Windows 7 - video filters in Windows DVD Maker: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/video-filters-in-Windows-DVD-Maker-frequently-asked-questions -
A few missing drivers help please!
Hi there my girlfriend has gave me his HP Compaq nc6120 with windows xp professional to fix when it starts there are some missing drivers I identified the following:
PCI simple communication controller
mass storage controller
Ethernet controller
multimedia audio controller
any help to fix this would be greatly appreciated!
Hello:
I found this solution to the problem by performing a search. If you do, you must back up your registry and create a restore point before you make changes to the registry:
Paul
Maybe you are looking for
-
How can I synchronize multiple users information while it's still the same?
I don't want to synchronize the information of a user with multiple devices. I want to synchronize multiple modules so that all users on a computer see the same configuration of Firefox - menus, extensions, etc. How can I do this?
-
My Skype on Windows 7 screen seems awkward (photos)
I have been using Skype on my Windows 7 PC for the past year until I learned that my current version is outdated. I installed the latest version only to find out that it does not work. Skype screen seems clumsy and does not connect with my Skype name
-
I was contacted today by an Indian accented man representative that it is Microsoft. He said you got a problem with my PC and proceeded to guide me to an area to 'My Computer '. I just listened for awhile and did nothing to my PC. He said he had to d
-
Original title: the specified network folder is currently mapped using a different user name and password.__To to connect using a different user name and password, first disconnect any existing mappings to this network share. I am trying to connect t
-
Hi all! I am working on a Dell XPS M1330 computer for a friend. When I got it, it was equipped with Windows Vista at a very slow pace and was inflated with the PUPPY and malware. He had a few strange bugs too, as the fact that he made a high-pitched