my cd burner and player d will not work, do not know if I have inadvertently deleted the drivers (like I don't know what drivers they are / were)

Similar Questions

• I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset on AEC

  I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset to factory settings and it still doesn't load. There's just 1%. Help, please.

  Thank you

  Katie

  It is under warranty. Suggests taking it for an Exchange.

• Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any w

  Update trial version, but got and even that will not open because my email associated with the account configuration has changed, so I can't get into it at all. Adobe said that I can't change my email that I have to close my account and start a new. any way around this? sounds to me ridiculous

  Contacted Adobe Support and they recommended to configure the new Adobe ID?

• How redir to C:\ TEMP > unwanted dir dir is empty but will not remove. I can't delete the dir eighter. Any ideas?

  How rmdir C:\ TEMP > unwanted dir dir is empty but will not remove. I can't delete the dir eighter. Any ideas?

  Hello Ssmith331,

  Welcome to the Microsoft Answers Community!

  Try adding a/s in front of the path of the directory you want to delete. For example: rmdir /s C:\Temp\Test

  For more information about the Rmdir command, follow the link below:

  RMDIR

  Hope that helps, I look forward to hearing from you.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Help..! I got the blue screen and other issues, do not know what to do...

  Signature of the problem:
  Problem event name: BlueScreen
  Please help me, I got the blue screen and this message today while I was trying to solve a problem with the backup of my pc...
  Don't know what to put here, if you need more make me know... Thank you

  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 8086
  BCP1: 00000000
  BCP2: 00000000
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini030513-01.dmp
  C:\Users\Andy\AppData\Local\Temp\WER-59483-0.SysData.XML
  C:\Users\Andy\AppData\Local\Temp\WERF871.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hello

  Thanks for posting the question in the Microsoft Community!

  To help you better, we need more information.

  What is brand and model computer?

  To work with the issue, I suggest you check out the site:

  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Note: When you format a disk, all data that it would disappear.

  It would be useful for us to identify the problem, if you could upload the dump file.

  You can use the Sky-drive to download the dump file. See the link for the steps on how to download Sky-Drive.

  Download pictures and files:

  http://Windows.Microsoft.com/en-in/SkyDrive/add-photos-files-FAQ

  The location of the dump file is C:\Windows\Minidump\.

  If the problem persists, or in the future if you face problems of Windows let us know and we would be happy to help you.

• When I install FSX SP2, the box of the menu showing the plan chosen and also in the game, the graphics are all messed up (black, black with lines on the screen and so on) do not know what to do? I need help.

  I have FSX Deluxe. When I installed FSX SP1, it was all fine, but when I installed FSX SP2 graphics were messed up. So I uninstalled FSX SP2 and tried again, and it was the same thing. So I uninstalled FSX all together and reinstalled fresh and put on FSX SP1, it was going well until I put FSX SP2, the same thing happened again, messed up graphics.

  So I uninstalled FSX SP2 and updated my drivers graphic and tried again and the same thing happened.

  I need help please.
  Thank you

  Hi Mmarshall_1993,

  Welcome to the Microsoft Answers site.

  We would like to get a better understanding of this issue, so we can better help not only you but other users with similar problems.

  (a) what operating system do you use?

  Method 1:

  Adjust display settings

  Many recent Microsoft games require a card video and monitor that can run a resolution of at least 800 x 600 in color (16 bit). Set the resolution of Windows display on 800 x 600 in color (16 bit), and then test the game. To do this, follow these steps:

  1. in Windows XP, click Start, point to settings and then click Control Panel.
  In Windows Vista, click on start to reduce this includes personalization thtype in the Search box and then click on personalization in the programs list.

  2. in Windows XP, double-click display.
  In Windows Vista, click display settings.

  3. click on the settings tab.

  4. move the slider of the desktop area or screen area slider to 800 x 600 pixel definition.

  5. in the Color Palette box or in the color box, click colors (16 bit).

  6. click OK and then click OK again.

  7. click Yes to accept the setting.

  Method 2:

  Adjust graphics hardware acceleration

  To adjust graphics hardware acceleration, use the method described for the operating system that you use:

  ·         Windows Vista

  1. click on start to reduce this includes this ima, type personalization in the Start Search box, and then click personalization in the list of programs .

  2. click on display settings.

  3. click on Advanced settings.

  4. click the Troubleshooting tab, and then click change settings.

  Reduce this includes this imIf that you are prompted for an administrator password or a confirmation, type the password or click on allow.

  5. move the notches on both Hardware Acceleration slider to the left of full (the parameter disable the accelerations of cursor and bitmap ).

  6. click OK and then click restart now.

  7. once the computer has restarted, test the game.

  ·         Microsoft Windows 2000 or Windows XP

  1. click on Start, point to settings and then click Control Panel.

  2. double-click on display.

  3. on the settings tab, click Advanced.

  4. click on the Troubleshooting tab.

  5. move the notches on both Hardware Acceleration slider to the left of full (the turn off all cursor and advanced drawing accelerations setting).

  6. click OK and then click OK again.

  7. test the game.

  Method 3:

  Check or turn on Direct 3D

  To check or turn on Windows XP Direct3D acceleration, follow these steps:

  1. click on Start, click run, type dxdiag , and then click OK.

  2. on the display tab, verify that all DirectX features are enabled. If all the features are disabled, click enable next to the feature.
  Note If some DirectX features are unavailable, verify that your video card meets the minimum requirements.

  For more information, follow the below mentioned articles.

  How to resolve display issues in Microsoft games

  http://support.Microsoft.com/kb/263039

  The Flight Simulator X game display flickers and are damaged on a Windows Vista-based computer that is connected to multiple monitors

  http://support.Microsoft.com/kb/933590

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I've recently updated shockwave and now videos will not play in firefox, it says that the addon stopped working

  Can you tell me which version of shockwave, I should have and how to upgrade to make it work correctly

  The videos are often in formats other than just that Flash Player provides. The majority of Firefox users use FlashPlayer. There are still a lot of content that need unfortunately, so it depends on what you're trying to watch.

• I download my this program and that it will not set up I have used it before on this program, but since the restoration he won't let me not re-download it

  Hello if anyone can help me I use windows 8 I recently did system restore and restored the last point, but who was previously had cloud of creative... it was working fine before the restoration, but since restoring I can't so he can set up again the installer said installs then gets to the desktop icon then disappears as I did a search of files on my computer and nothing is on my pc just the whole upward please help me, it was on the free trial version but I got another 25 days to go with the free trial version

  Run the Creative Cloud ( http://www.adobe.com/support/contact/cscleanertool.html ) cleaning tool to remove all/all CC products installed.

  Also delete Adobe Application Manager. Download the MAO from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773

  And then install the product.

  Concerning

  Baudier

• my windows media player 11 will not rip music. He used to rip very well, but I got comp. recovered, and now it will not. What's wrong? everything else works fine, it is burning, play music, etc.

  look to the top title. my windows media player won't rip music. used to RIP is fine, but I'm me comp. recovered, and now it will not. It's all fine.

  Hello

  ·          What happens when you try to extract?

  Step 1: Try the following steps:

  a. open Windows Media Player. b. click on tools, Options, then choose Devices tab. c. Select the CD drive, and then click Properties d. Select digital and use the correction of error on the part of reading both Rip. e. click on apply and then click Ok. f. try to rip music and check.

  Step 2: If the steps above fail, try the following steps to change the settings for Windows Media Player:

  a. open Windows Media Player. b. click on tools, Options, then choose tab music Rip. c. under Rip settings, change the format to MP3 or WAV. d. then set the Audio settings for best quality. e. click on apply and then click Ok. f. try to rip music and check.

  See also: http://windows.microsoft.com/en-US/windows-vista/Change-settings-for-ripping-music

• Windows Media Player 12 will not play or burn music CDs!

  Running Windows 7 Home Premium-Windows Media Player will play a DVD but will not play an audio CD, which begs the question: why it does not burn the CD using Roxio Burn (which just sits there doing nothing) just like WMP 12.  I tried uninstalling and reinstalling and suggestions in this forum, but nothing is done.  Microsoft has really any solution of constantly failing to player?  In addition, reinstalled my computer back to the State factory and Media Player STILL will NOT play or burn music CD.  Hello, Microsoft, I would rather download Media Player 11, which at least has worked, so tell me how to get that back.  Thank you.

  Are normally given CD detected?
  If not, the problem is probably with the drive itself - CD and DVD is access differently if we wouldn't necessarily affect each other.

• I can't install adobe flash player. Will not take my password

  I can't install adobe flash player. Will not take my password... I tried several times. Before I had no problem a few months ago. Now, he hangs up and jitters just when I put my password. What I am doing wrong?

  Calvin

  Read the following article and then decide if you really want to continue to use it or not.

  See > http://krebsonsecurity.com/2015/06/a-month-without-adobe-flash-player/

• Windows Media Player 11 will not play video

  Windows Media Player 11 will not play DVD-video or video files from a SD card.  I tried several update codec options, but none were successful, including the option offered by Microsoft (http://www.microsoft.com/windows/windowsmedia/download/AllDownloads.aspx?displang=en).  Windows tells me that a more recent update has been installed and refuses to go forward.

  Hi RonMcCulloch,

  ·         You receive an error message or error code?

  ·         What is the type of file you are trying to play?

  ·         The DVD I get recognized by the computer?

  ·         Did you do changes on the computer before the show?

  In the meantime, you can try to reduce hardware acceleration, and see if it resolves the problem. (Only if your video card supports hardware acceleration)

  a. open the screen resolution by clicking on the Start button, click Control Panel, and then under appearance and personalization, click adjust screen resolution.

  b. click on settings Advanced , the Troubleshooting tab and then click change settings.

  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.

  d. click OKand then click restart now.

  Let us know if it helps.

• When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave

  problem title: original accessory

  When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave.  Help!

  When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave.  Help!

  What do you say "he's not leaving"? He kept playing with his only non-stop?
  If it is 'yes' or 'no', you can always he kill 'soft' media player.

  Take a look at your video accessory. What are the last 3 numbers, such as avi, mpeg, mov etc. ?
  It is possible that your video accessory is in a format unsupported by Windows Media Player.
  Save it in a folder of your choice.
  Googe for a FREE video converter (if you do not have one) and convert the video file toWMV.
  Now you should be able to read in the drive media with images and sounds.

  t-4-2

• Media Player 12 will not remain full screen for more than 5 min.

  Upgrade Vista Ultimate to 7 Ultimate. Media Player now will not stay full screen for more than 5 minutes during movie playback. How can I fix this please?

  When presentation settings are turned on, your mobile PC stays awake and system notifications are turned off. I would not advice you constantly running in presentation mode because it does not allow your computer becomes idle (and display the screen saver) even when you do not do anything. He probably solved your problem because one of your application does not perform certain actions as before, because it's always 'think' that your computer is not idle.

  You should do something like this: check the settings for these two applications: Vaio update and Trend Micro (probably you can get there after right-clicking on the icon in the notification area and choose the appropriate context menu position). There should be some options when these applications are performing the update process. No doubt, one of them made when the computer becomes inactive if it may affect the mode full-screen. I guess that might be Vaio update, because I read that since version 2010, Trend Micro has been improved and should not cause this problem, but you should check the two of them. You should change the appropriate settings, so it will play the update process in another moment.

  There is also something else you can try. You can read this article: How to prevent the flight home in Windows programs . You can find how to prevent theft of focus programs, then perhaps it can also solve your problem. Maybe after the upgrade to Vista, specific registry key does not contain the appropriate value, and you must follow these steps to fix that:

  1. Click Start and then click run (or you can press Windows key + R )

  2. In the text box on the run window, type regedit and click OK. This will open the registry editor program.

  3. Find the folder HKEY_CURRENT_USER under my computer and click the plus sign (+) after the folder name to expand the folder.

  4. Continue to expand the folders until you reach the HKEY_CURRENT_USER\Control Panel registry key.

  5. Select the key of Office under Control Panel .

  6. On the right side of the screen, locate and double-click ForegroundLockTimeout DWORD.

  7. In the Edit DWORD value window that appears, set them value data: field to 30 d 40 .

     Note: Make sure that the Basic option has the hexadecimal value, when you enter the DWORD value.

  8. Click OK , and then close the registry editor .

  9. Restart your PC for the changes to take effect.

  10. From this moment on, programs should no longer steal focus from the window you are currently working.

• Workstation XW8000 with XP recognizes the new DVD player but will not read DVDs

  I just added a DVD player for my HP xw8000 workstation. It is being prepared to try installing Windows 7. Windows 7 Upgrade Advisor says that my machine calls brilliantly... all green. Also, because many new software products are released for MSDN on DVD, it is necessary for me to be able to use this DVD ROM.

  I installed the DVD drive is recognized by WinXP Pro with all the latest service packs. Shows up as drive E in Explorer, it appears as a CD ROM In Device Manager it is listed as E - IDE DVD - ROM DVD-8212. However this player will not read a DVD!  I tested the DVD media in another more recent machine and it reads very well in a same DVD ROM.

  Is there something wrong with the xw8000 it cannot read from a DVD ROM drive?

  Thanks for any help.

  Weird that you receive notifications by email of responses. Usually, this is the default setting. When you type a response, it is usaully a box that is checked to receive notifications by e-mail. (Top right)

  I agree, the DVD player seems to be defective. It should work with only Windows drivers. The only additional files that you need would be to play movie discs, etc.

  Are your jumpers on both drives positioned same_If the cd drive is jumper as master, the other slave as you. If the other player is cavalier CS (cable select) the dvd player must be linked, CS. I think most of the HP machines are CS. Try that to see if it solves. If this isn't the case, maybe time to try another drive.