deleting files and index recovery

Similar Questions

• How to delete files on the recovery disk?

  I'm running out of space on my recovery disk.  I noticed that the compress and the index of the boxes are both checked.
  I would like to know what to do and how to delete files on the recovery drive.

  Thank you for your help.

  It is very unwise to delete these files, because it is your ONLY way to recover your PC in the event of catastrophic problem with the operating system that cannot be repaired by returning your PC to set up "out of the box.  In fact, most of the PC with a recovery partition you cannot save data on that partition.  If you are still determined to do the easiest to remove these data is boot safe mode with command prompt.  Set up the focus on the recovery partition and delete everything form the command line.  I'm not trying to be insulting, but if you don't know how to do that you probably shouldn't be remove your data from the recovery Partition because without falling back on you should have to be pretty savvy to reload Vista and install all the drivers on your own.  Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!

• I get an error message that my memory is low, but when I go to delete files from my recovery disc it will not allow me too.

  Original title: recovery Partition

  Stays of complete recovery partition may not free up any space. I get an error message that my memory is low, but when I go to delete files from my recovery disc it will not allow me too. There are 6 total folders on my drive:

  Dell, Program files users tools and windows sources.

  The Windows folder and the program are the most important concerts of 6-7 piece. But when I try to delete them or move only to the recycling it is bin-error right and says Destination folder access denied and I need permission for this action... Any idea would be deeply appreciated. Thank you

  I apolgize if I look tense. That's the way I read your phrase... > if I try yo run an app download anything I get this error...

  I suggest that you contact the manufacturer of your computer. Ask to speak to a technician and explain to that person of the situation.

  I'm afraid that I have no idea why your recovery partition gives you message "not enough memory" If you have never touched him.

  Maybe you'd wait for people with better computer skills to help you.

  Thank you.

• I was deleting files and delete something that now I can't play my music files... and my Youtube videos are no longer in sync with the songs. HD playler / Flash...? What I've done. ? How do I get it back

  I was deleting files and delete something that now I can't play my music files... and my Youtube videos are no longer in sync with the songs.  HD playler / Flash...? What I've done. ?  How do I get it back

  Hello

  As you are not sure of what you have removed for cause of your problems, I suggest that do you a system restore to a date before you start deleting these files, and then start carefully again, before to remove any file of dual control.

  How to make a XP system restore:

  http://pcsupport.about.com/od/fixtheproblem/HT/system-restore-XP.htm

  See you soon.

• I accidentally deleted files and even deleted from the Recycle Bin. Is there a way to retrieve them using MS DOS?

  I accidentally deleted files and even deleted from the Recycle Bin. Is there a way to retrieve them using MS DOS?

  Thank you both of you who tried to help. I just found out that Dropbox keeps deleted files images for 30 days. I just need to go in their undelete function, choose the files that I deleted and restore them. It has been easy.

  Thanks again

• I can finf a log of deleted files and folder in Event Viewer

  can I finf a log of deleted files and folder in Event Viewer ARE ANY TOOL

  Hello rameshkumar_11240,

  Thanks for the reply.  For the question that you described above, please transfer this issue to the address provided below in Microsoft TechNet Forums.

  Microsoft TechNet forums

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• find any newspaper of deleted files and folder in Event Viewer

  find any newspaper of deleted files and folder in Event Viewer OR any tool to find

  AFAIK there is no newspaper.  Do you need to recover deleted?

  If so, try a third party called Recuva application.

• Deleted files and folders in Dreamweaver keep reappearing

  Help! After that I deleted files and folders in my Dreamweaver sites, they come back! This has happened for the last few weeks and I don't know why!

  I've deleted coming from within Dreamweaver, deleted from the Windows Explorer of Microsoft (on a PC - Vista) even the trash and when I click on a site in Dreamweaver, a small box appears real quick and they all show upward.

  Boxes say: link info from cache... and the other cargo box pops up and says: looking for new or changed files. You can safely stop this, if you have not modified files outside Dreamweaver... 4800

  Could it be and how can I disable this?

  I have Dreamweaver CS4 and CS5.5 and happens in both. Thank you!!!

  1. Open the Site Manager to the top, and then select your Web site.
  2. Click the Advanced tab and local information to the title of the category.
  3. Uncheck the box "Enable Cache". Yes leave it off, it is more of a resource than an asset hog.
  4. Go to the bottom of the list of the Remote Info category and uncheck the "Maintain synchronization information" if it is enabled.
  5. Go to the bottom of the list of categories in Version control. Are you using and control solution version which could be the last recorded together rebuild? Solved? Isn't it? Continue.
  6. Under category, select Design Notes. Uncheck the box keep the Design Notes and then click on the button "Clean up...". ». Leave unchecked.
  7. Click the OK button to save your changes and exit the Site Manager. Release of Dreamweaver.
  8. Download CleanWeaver site GniDesign. This is a free tool from GniDesign who hunts on the _Notes on Windows systems files and removes them safely!

  

  CleanWeaver 1.0

  You are welcome
  

• Finding deleted files and folders

  I have a woman living under my roof, which has decided to delete the value for the year of my photos and my files into oblivion...

  Any way to recover files that were not only sent in the trash but empty from there?
  I tried to restore my system to a date earlier and all records were back, but they were all empty.

  Is it possible to recover these files and folders still intact?

  Thank you

  Shawn

  It depends on how your file has been deleted.

  If your file was shreded using third party software so it is not possible...

  If it was simply window option Removing guy then... you have a restore option... You have not installed or copied all the files etc in the same place has PROVIDED...

  The best third party tool, you can use is the recovery of the PC a third-party tool...

  If you copied or whatever installed to the location where the files have been deleted... then stop trying you Cann't get back them...

  Yes...

• Cannot delete files and music always there but not display upward when I connect to the computer?

  Hi all

  Recently, I had a lot of problems with the music does not or don't play not I decided to delete all my e260 music and start again.  That's where the real problem started.

  For some reason I can't delete three of the albums on my player.  Each of the albums have what appear to be corrupted in them files. My computer does not recognize the file type and file extension is given so I don't know what they are.  Each file "appears" to 4 GB in size but that may not be appropriate for my e260 is obviously only 4 GB in size!

  Whenever I try to delete them I get an error message reading "cannot delete file: cannot read the source file or disc»

  I tried to update the firmware, reset e260 to factory default settings and made 'restore' thingy (where you hold registration and plug it into the computer, etc.) and these files are still there.

  After reading this thing of disk checking on this forum, I did this.  I was then able to remove two of the albums, but when I tried to delete the third album renamed 'a' and the damaged file shows 0 bytes in size, but I still can not remove.  However, I can move it to the folder music to any other folder.  I just can not remove!  When I do, I get an error message saying "cannot delete f: cannot find the file specified. '.  Be sure to only specify the path and the correct name.

  After all that I started my e260, and now I find that 2 other albums are always on it, even if they do not display any where when I connect it to the computer.  I can see and read these albums on the drive, and they seem well, they do not appear to be there when I plug it into the computer and look for them in windows Explorer.  The music folder is not hidden also.  These two albums are not part 3 albums that I could not remove, they are actually part of the new substance started sort of all these problems with the music does not and is not only now that they are the display upwards and play but are not appear when connected to the computer!

  I know it's probably not a lot of information but can someone tell me how to fix this?  If not, can I just format the * bleep * thing or I'll then have an e260 dead?

  See you soon,.

  PKFFW

  PS: Sorry for the long windedness of this post.

  Format will not remove the firmware, which is the operating system of the Sansa. It removes only the content that you have added. It will go back to what it was when it was new out of the box.

  MTP does not matter if you have never used it. The ghost album can be just a list remains in your database file. Nevertheless, we must get rid of this corrupt file, so Format is probably your best option.

  For what it's worth, to connect with the PSG, your computer needs Windows Media Player 10 or 11 is installed. XP comes with WMP 9, so he will not see the Sansa in MTP mode. unless you have updated.

• Impossible to read only to delete files and folders.

  read-only cannot be removed some of my folders and files and I need to do that for my win7 upgrade moved to a new folder, so I can start to install, anyone who can help?

  Hi JornSoer,

  We can try 2 things...

  1. click on start-> run, type &-> cmd-> ok. Now browse the path where your readonly file (easy to open file in my computer and copy the address, now in the command prompt, you can paste the path prefix cd.) It will be c:\ > cd .

  now Type-> attrib - r *. *

  This will remove all files readonly in the folder.

  You can check it by typing-> attrib

  now refresh your folder in my computer and check if it is not marked as readonly.

  2. you can try to take ownership of the folder again by the method listed in http://support.microsoft.com/kb/308421.

  I hope this helps. Option 1 can work for you...

• Attention please: recovering deleted file and window gone corrupt

  Hello

  I had a HP PRO s 4530 in Sept 2011, next day recovery file has been deleted by mistake. Now after 2 months my window stop working suddenly and asking me to retrieve the window.

  I bought the laptop on the local market and told me that we cannot recover the window because you don't have the recovery file.

  I live in PAKISTAN and obtained the laptop in the international interest. I will be grateful to the HP support if they will let me know the solution so I can recover my window recorded.

  Enter the BIOS by tapping/holding immediately F10 key after turning on. Use Diagnostics test your hard drive and memory.

• Is there a way to reovery deleted files and photos of my garbage after trash has been accidentally empty?

  I had images files in my trash which were dleted. Is there a way of recovering these files now?

  Hi TheBanbys,

  Thanks for posting the question in the Microsoft Community. It seems that files have been deleted from the Recycle Bin and you want to get it back.

  You should maybe use your favorite search engine and the search for a third party recovery tool and check:

  NOTE: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  If you have any questions with Windows do not hesitate to answer and we will be happy to help.

• How to recover files and folders RECOVERY DISCS? (hp pavilion hpe / windows 7)

  
  

  GOOD GRIEF!  I found my problem! Thanks for your help and advice, I now know what I've done... I did the DVD to backup my FILES (5 DVDs) and after that was done the RECOVERY DVD (3 DISCS), my dad put the 5 file DVD side and thought what we had were the 3 DVD recovery... my moment of panic when I couldn't find a way for files...  SO THERE WE GO, PROBLEM SOLVED! BUT WITH A BETTER KNOWLEDGE OF HOW TO SAVE / SAVE AND RECOVER!

  THANKS AGAIN

  Spoiler (Highlight to read)

  

• I can't rename files and folders, or delete files and folders. Please someone has a solution, I run vista 64 k bits.

  The window in which I try to rename a file or folder freezes after I'm done typing the new name as soon as I right click or press enter.

  The same effect occurs whenever I try to delete a file or a folder as well. The window hangs and won't let me use the pc, but for internet browsers only and retarting the pc renaming it scheduled and are deleted. So basically, whenever I have to rename/delete a file or folder of the pc freezes and I have to restart to be able to use the pc for internet access. It's very frustrating and I would appreciate help, please.

  Hello

  1. Since when are you facing this problem?
  2. Have you logged as administrator?
  3. You did any recent changes?

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.