deleting the old file

Similar Questions

• Time Machine, delete the old files from MacAir?

  We had a MacAir and a MacPro at home and both were using backups time machine on our 2 TB Time Capsule. I sold the MacAir and replaced by a new MacBook. Can I delete the backups Time Machine of old MacAir and make room on my time Machine 2 TB for Macbook? I get a message of disk space for the first backup of the MacBook.

  Can I delete the backups Time Machine of old MacAir and make room on my time Machine 2 TB for Macbook?

  Yes you can.  Your next question may be 'how' to do it.

  Use the Finder to open the disc Time Capsule, named "Data", except if you have renamed the reader

  Here, you will see two files sparsebundle, each bearing the name of Mac, who has been the object of a backup

  Click on the name of the sparsebundle file on behalf of the Mac to highlight the file

  Click the gear just above the window, and then click place in the trash

  He is not coming back, so make sure that you delete the correct file.

  Once the deletion over... it should only take a few minutes... Turn off and restart the time Capsule and you should be all set.

• I get a widow in my lower toolbar that rpet low disk space, and when I click it to try to delete the old files, it does nothing... so what do I do... ?

  I get a window in my toolbar lower repeating me low disk space and when I click it to try to remove the old files, it does nothing... so what should I do to get rid of the files in a "D" file...?

  Please perform these steps and the back of the report.

  Click Start, click computer, and it will display your hard drives and their letters. Normally C: is your operating system and where everything is stored (user: files, programs, Documents, photos, etc.). The D: is your RECOVERY partition and contains a copy of the first installation of the plant. The D: is small, about 9 to 15 GB, depending on the version of Windows.

  For example, my C: displays 306 GB free (unused) 374 GB (hard disk capacity). D: shows 2.11 free 11.5 GB GB. This is normal for HP, Compaq and others. New HP (Win 7) include an E: with less than 1 GB of capacity, to store a program utility tools. These so-called hard disks are in fact partitions installed on a physical hard disk, but not to concern. The c: partition free space is your important answer. BeAware that the D: and E: (if you have the configuration described above, are never to be used as restore points, or your personal files, they are allocated by the manufacturer to support the reinstallation of the operating system.) My example shows that my C: partition made only 68GB used on the disc, 306 GB is free (unused) 374 GB capacity.

  (1) report with numbers, and you can be helped.

  (2) Vista writes copies ghosts of all your documents (previous versions of the files). These can take many GB.

  (3) when he gets less than 20 percent free, you start to have problems with the disk defragmentation. Less than 10% results in critical problems, the problems of performance and for the worse.

  (4) if the number of free GB is really a low disk space issue, you need to move some of the large data files (pictures, videos,...) out on CD or DVD.

  If it helps, let me know. I'm not a moderator, just a user trying to use simple language to help others.

• phishing filwhy run a DLL as an app get when I try to delete the old files and the browser cookies each time?

  Why run a DLL as an application encounters a problem and needs to close whenever I try to delete my browser cookies and old files?

  Hello
  Markets or cookies were made that changes in your browser please reset the internet settings for your borwser.

  http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settings-in-Internet-Explorer-9?OCID=ie9_bow_Google&WT.srch=1&MTAG=SearGoogle

  Kind regards
  J Chadnrasekar.

• Can I safely delete the "Old files Firefox" file from my laptop?

  within this file is this one: 7tmo2rs4.default

  It contains a lot of files, including sqlites

  Hi fourtwojaw, the old data of Firefox folder is created or updated when you use Refresh in Firefox. The semi-randomly-named folder inside contains your old settings, which some have been preserved in the refresh (such as bookmarks) and some are only in this folder. If you have not noticed something important missing, you can remove the folder, but I suggest allowing a few weeks because you will not notice the loss immediately.

• I installed Windows 7 on a Vista machine. I want to delete the old files of Vista but system requires the permission of Mike-PC\Mike to make changes to this file. How can I get this permission?

  I am convinced that the old program gives me a message about more than 500 fonts are installed everytime I open a works file.  This is my understanding of Windows 7 there is no limit on the installed fonts.  The old Vista file is more than 90 GB.  I already a copy of the file on a separate drive if something of him is never necessary.

  If the Windows.old folder, the best way to remove it is with disk cleanup.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

• Delete the old log files from IDS4210

  Is it possible to delete the old files of the IDM event log? If this is not the case, what is the best way to remove them.

  Thank you

  Maged

  By default, the old log files are deleted automatically because the system fills the disk and the file age.

  You can manually "clean" by using the following procedure:

  Sign in as netrangr and cd in the/usr/nr/var directory.

  Run idsstop

  dump/usr/bin/RM-f / * errors / * iplog / * iplog/news / * iplog/dumpster / * new / * log.* erreur.*

  Run idsstart

• I created a new profile and copied the files from my old computer inside firefox. How do the new profile, just delete the old one?

  I am running windows 7, I had to recover my files on an external hard drive when my old computer crashed. I created a new profile as described in the Web site of firefox and copied all the files into it. I just need to know how to use the new profile when I open firefox, just delete the old profile? Or do I have to reinstall firefox.

  If you no longer have need or intention to use this older profile, then you can use the Profile Manager to delete this profile and delete the files.

  • http://KB.mozillazine.org/Profile_Manager
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• After updating a Web site always appear the old file

  I have a site for my bowling club. When I update for instanse a result file it seems wrong - it's the old file that appears. It does not help to restart Firefox or delete the file (yes I try to open it and then I got the usual error message) BUT if I download the file again and then try to open Firefox still displays the old. There is no problem in Internet EXPLORER or Chrome.
  ??? of ganitaa

  Please update Firefox 19.0.2 Firefox updated to the latest version

  So please clear your cache and cookies, How to clear the cache of Firefox

• How can I delete the old images payne so I can start a new project?

  When I open the program WMM old files may appear in the payne.  I don't know how to delete the old images, so I can start the project.
  Can you give me some advice?

  Hello

  Follow these steps to delete old projects in Windows Movie Maker:

  a. open Windows Movie Maker.

  b. click on open.

  c. now, select the project.

  d. right-click on the project and click on delete.

  A confirmation prompt will appear on the screen, click Yes.

• Is it safe to delete Windows.old files after doing a system restore?

  I would like to know if it is safe to delete Windows.old files after doing a system restore. I did two restorations system in a year or two, and I have two files labeled "Windows.old" and "Windows.old.000" which are just take a lot of space on my computer. I heard that it is safe to remove them, but only if some files are copied correctly. How do you know if those files are copied on?

  Thank you!

  Hello

  It is safe to delete

  but get your data off it 1 if necessary

  you are the one who has to decide if you have recovered your data from the windows.old folder, until you remove

  Here's how to recover data from it

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  and here's how to remove

  http://www.Vistax64.com/tutorials/240390-Windows-old-folder-delete.html

• Cannot delete the old folder separate disk windows

  I had a system OS 3 for a while, Vista, Win7 RC and Win7 Pro.

  Win7 RC is pleased and I want to delete records from his drive to free up space.

  I took possession of the folder (including subfolders) windows and my account is an administrator with full control account, BUT when I try to delete the old directory of windows first it says I need give permission, I click on continue, she goes through the files, and then a box indicates that I need permission from account owner Joan to continue.

  I'm logged into this account. This account is me, but when I click on continue, it says access denied.

  It's the same with the old directory program files.

  I can't delete, or the old directory of users.

  None of them is used. All are owned by mey account (there are only two accounts put in place on my PC and mine's administrator.)

  I am running windows 7 Pro 64 bit installed on my E drive.

  The files that I want to delete are on the c drive.

  How this computer to recognize that my admin account has full right, remove the obsolete operating system?

  Thank you

  Can archaeologist, you access the OS Win 7 RC?

  If so, use it "Folder Options" in the control panel.

  To all the "hidden files" readable.

  You say that you are the administrator, you should be able to do.

  You also try to remove Vista, as well?

  Do the same with this.

  Why you be "denied access" is... because these system files 'hidden '.

  Once this has been done, you can now in Win 7 (the one you want to keep!).

  In administrative tools, select 'Create and format hard disk partitions.

  Right click on the BLUE bar, drive hard 'in question.

  This will give you... .with a drop-down window, containing...

  Opened.

  Explore

  Mark the Partition as "Active".

  Change drive letter and paths.

  FORMAT!             -(Third, make just... use this format.)

  Extend Volume... (This will be the second to be used, if the button remove one has not already removed those'hidden Files/Folders!)

  Reduce the Volume...

  Delete Volume---(Ces 4 sont ce que vous êtes après, surtout celui-ci)< to="" start="" with.="" you="" should="" be="" able="" to="" delete,="" being="" the="">

  Properties

  Help

• How can I create a new user account any movement towards it and delete the old

  Win7 need to create a new user ACCT. move all the Info for it because want to rename the computer, and then delete the old user account

  To create a new user profile

  To create a new profile, you must first create a new user account. When the account is created, a profile will also be created.

  1. Open a user account by clicking on the button start , by clicking on the Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click on create a new account.

  4. Type the name you want to assign to the user account, click an account type, and then click on create an account.

  To copy files to the new user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  1. Log on as a user other than the new user that you created or the user that you want to copy the files.

  2. Open Documents by clicking on the button start , and then clicking Documents.

  3. Click on the Tools menu, and then click Folder Options.

     If you don't see the Tools menu, press ALT.

  4. Click the view tab, click hidden files and folders, clear the Hide protected operating system files check box, and then click OK.

  5. Find the C:\Users\Old_Username folder, where C is the drive that Windows is installed, and where ancien_nom_utilisateur represents the name of the profile you want to copy the files to.

  6. Select all the files and folders in this folder, except the following files:

     • Ntuser.dat

     • Ntuser.dat.log

     • Ntuser.ini

  7. Click the Edit menu and then click on copy.

     If you don't see the Edit menu, press ALT.

  8. Look for the C:\Users\New_Username folder, where C represents the drive Windows is installed, and New_Username is the name of the new user profile you created.

  9. Click the Edit menu and then click on paste.

     If you don't see the Edit menu, press ALT.

  10. Sign out and then sign back in as a new user.

      If you have messages in e-mail, such as Windows Mail, you must import your e-mail messages and addresses to the new user profile before you delete the old profile. If everything is working properly, you can delete the old profile.

• Can I delete the old name of properties?

  In Adobe Captivate 8, I created a group. Then I went to properties and baptized. I made a change to the Group and thought that I deleted the old name of properties. However, when I try to give the same name to Captivate 8 properties says I can't. Where can I delete the old name of properties?

  Thank you

  

  I'm sorry, that Captivate memory can be very stubborn. For most of the names, even if the object with the name has been deleted, you can not reuse them. They are stored in memory "file."

  There are a few exceptions (such as shared action names), but groups is no exception. My solution: change one of the characters of a capital, or insert underscore. Almost the same name.

• Web publishing by publishing the OLD file?

  This is hard to explain, because it seems to defy logic.
  
  I did an authorware project. During the creation process, I published the web regularly see the changes. Great! No prob! However, when I finally made the last changes and settings, when I published, it maintains publication of the version that existed BEFORE I made the most recent changes. When I play in the authorware environment, it's OK. When I saw the Web page after the publication, I see the OLD version.
  
  I detached the file settings. Published again. He published the old file.
  
  I have "saved as"another file. " Published again. He published the OLD file.
  
  I even DELETED the original file. He published the DELETED version.
  
  I posted on another computer! You guessed it! He published a version that doesn't even exist anymore!
  
  I'm obviously missing something... a "cache" or something I don't know?... Can someone help me?
  
  Jeff

  Dear Jeff,

  The solution is to ask your crazy question on a discussion forum. The authorware program will wait until you make a fool of yourself. Then, the next time you post, it will work, in spite of doing nothing differently from the previous 25 times. Just an info!