Deletion of images when the external drive is disconnected.

Similar Questions

• Cannot restore the image of the external drive

  I got a bolt of lightning and the factory hard drive needs to be replaced. I created a DVD boot disk and a current backup system on a USB external drive. Everything goes as planned; I boot on the DVD, Windows loads the files and the cranks Recovery Manager. I go through the guests to restore from system image, that I created earlier and the Manager believes the USB image. All is well until the system tries to install the image and then I get an error: failed to restore of system image. There is no drive that can be used to recover the system.

  The new drive is 500 GB, the old is 650 GB. Is the small size of disc the question?

  I caught a 1 to, a disc, which annoyingly I wants to go to the origin but rather picked up a 500 GB and the restoration seeks to advance. It has at least not out crapped on the date and is trying to restore the image to the new drive. With the fast error when restoring to the 500 GB drive, it seems the image was to remember the size of the partition and reluctant.

• 2014 MBP crashes when the external drive connected

  • MBP 2014 15 "El Capitan running.
  • Connected crush 3 TB Seagate GoFlex Desktop drive.
  • When I connect, drive starts, is recognized by Finder but the system locks and then hangs and then almost immediately.
  • Was OK until I tried to transfer a large file of MPB to drive recently, but now accidents as described above on each connection attempt.
  • (From startup using CMD - R) disk utility reports the MBP and external drive are good.
  • I have the system event log recent accident this morning if it helps (if need to tips on what part of the content to send).

  Thank you!

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• What is the best solution when my external drive for Time Machine is full?

  Hello

  I use the latest version of Mac OS X on my iMac 27 ". I use a drive outside of 3 TB G-Tech for Time Machine backup. Due to my recently many RAW photo images, I have less 8% left storage on my external hard drive, so I'm trying to figure out next steps in what concerns the strategy of external storage and have the following questions:

  • When my external drive for Time Machine is full, it is my understanding that older backups on external hard drive will be deleted to make room for newer backups. If the oldest backups contained pictures (whose records have not changed since the time they are initially stored), then I guess that these photos will be removed from the external drive - correct?
  • If I had to replace my external drive for Time Machine with a new external drive which is as big or bigger than the one it replaces, what should I expect on the size of the initial backup on the new drive? I guess the size of the backup would be exactly equal to the current amount of storage used on my drive hard iMac - correct?
  • Would it not be possible to connect the external drive for Time Machine existing at a new Time Machine external drive so that when the original disk is full, the overflow will be automatically stored on the new external hard drive for Time Machine? (If feasible, it seems that this strategy would maximize my external storage capacity vs just replace external drives.)

  I realize that my first two questions are rather basic, but I don't want to make any false assumptions. The third idea is intriguing and I would like to know if this is a viable option.

  Thank you

  Brian

  older files are starting to get deleted because the disk fills up then Yes, they went

  the backup drive should ideally be 4 times the capacity of your current drive, twice is good but has its limits. Also factor in what you store: a jpeg from the web and a raw photo file are the two images, the size of a is very different. If you work in high-resolution or large native files, or audio files (record pro, no music files) or video production twice the disk fills up very quickly. If you collect photos and JPEG and mp3 files or a handful of videos not so much is necessary.

  I would keep the old drive intact if you want to replace and start over with a new drive, if that's the plan. You have the old data, you can keep it somewhere safe and have a redundant backup which you can reconnect at any time to restore from. Let the new index drive itself with new data and take if from there, in the case otherwise you can copy the backup to the new drive and set the drive as the new source of backup but personally I wouldn't copy of the data, that's my preference, it may not be yours and that's fine.

• I copied the folder iPhoto to my 'images' on an external drive and all photos disappeared both external drive and the iPhoto library. Do you know where they are?

  Hello! I have a big problem!

  I copied the folder "Images" that is default in my Mac on an external drive.

  Inside the 'Images' folder, there is the iPhoto folder.

  When I reopened iPhoto, all photos disappeared from the iPhoto library and the external drive. I left alone with very little, very old photos.

  Do you know where my pictures maybe? Photos in iPhoto has also lost all the flags...

  Thank you in advance for the answer...

  Julie

  What software (name and version) are you using? What format is the EHD? How is it connected? What exactly did you do step by step

  Bottom line is that correctly copy a package does not remove anything so you did something wrong and we need to know exactly what you have and what you have done to help

  LN

• Shaking image on the external monitor when the Satellite A200 is running on AC

  Hello

  I have this problem that drives me crazy... I bought an external monitor for my laptop Toshiba Satellite A200-1 9 s, but the problem is that the image on the external monitor, shakes. I tried another monitor, the same, another cable, same problem; the only way to stop it is to unplug the AC of the laptop.

  I also tried to move the monitor further away from the laptop, but nothing.
  I can stop shaking so hard that if I switch to the profile AC from FULL POWER to save power... but even with this image is still shaking a little.

  So basically there is a magnetic field around here, probably in the portable, which makes my picture shaking like crazy... someone knows how to stop it?
  TX

  Hello

  Hmmm...
  I don't think it has to do something with magnetic fields.

  Cause she is related to the energy consumption of the computer, it seems that there is a problem with the AC adapter.
  If he needs to deliver all the 'juice', this is capacitors to keep absolutely stable voltage may be too low.
  These instabilities (with the frequency of 50 Hz supply) can parasitize the signal on the screen.

  A solution for this?... If you know how to solder some fat capacitors somehow between the two...

  Or:
  It is a grounding problem
  I have never heard of such problems with the LCD (VGA monitors?) monitors. Generally, this is the case when you use an analog video output,
  leading to no color on TV.
  You have an annoying hum when you connect the audio output to an amplifier? It would be a sign for it.
  I had such a problem and solved by plugging my laptop on the sector on another circuit in the House as my audio devices
  So experiment with it.
  First: unplug all the other stuff (printer, Poles, antennas, all) these are unpleasant problems with a lot of possible interference.

  Let me know!

  Welcomes Matz

• When you drag the file on the external drive I get the error code-43? What it means? How to fix? Thank you!

  When you drag the file on the external drive I get the error code-43? What it means? How to fix? Thank you!

  Restart the computer and try again.

• Media Player 12 losing library when the external hard drive is disconnected.

  I have all my music from an external hard drive. If the hard disk is on and I have Windows Media Player 12 to scan the drive, he built the library very well. However, I do like to keep this external hard drive on all the time so I must say Media Player to stop monitoring the disk in order to disconnect and power off. The problem is, the next time I reconnect the drive for music, I open the media player and the library has disappeared. I make sure that the reader always connects with the same drive letter, so it can't be the problem. Is it possible to keep all the information in the library when the hard drive is not connected to the pc. I'm sure that I was able to do this with previous versions of media player.

  WMP12 does not store the music files. It stores only the location of the files. If you are using a temporary drive, files disappear when the source goes away. The only solution for this is to put the files on your disk or hard drive connected all the time.

  To store your files on your hard drive in a place where the player plays automatically, go to the icon of (i.e.: C:\users\ ) when the folder opens, there is a folder named My Music. It is one of the files that WMP reads.

  If you don't have room on your hard drive to store all of the music, you can choose a few favorites or turn the music on your hard drive. You can just leave it to refill whenever you connect the WMP player.

• Use LR5. Because of volume and the size of the photos, I use an external hard drive. When opening LR5 it references only the local hard disk. How can I change the refernce to read the external drive. Thank you

  Use LR5, due to volume and the size of the photos, I use an external hard drive. LR refers only the Local Drive C not outside. Where do I change this by LR read the external drive. Grateful for the help.

  Thank you

  LR is not a file Explorer. He knows only the disks that you imported photos of.

  If you have previously imported these photos, then later moved into the external hard drive, go to the library files and "update location" Panel on the files that you moved.

  If you have never imported these images on the external hard drive, perform an import by using the option 'Add' (not ' copy') to keep the images on the external hard drive during import.

• Window Vista Ultimate 2007 backup files empty on the external drive.

  The computer is a desktop HP running Windows Vista Ultimate 2007, 32 Bit OS, RAM 400 GB and Intel Quad CPU 2 .4GHz.

  I ran Windows Vista backup for a full backup and a backup of the file.  When I look at the external disk to verify the backup files are empty.  There are two created on the external hard drive, but both files are empty.  The program indicates that the backup routine successfully on the external drive. I have not received any error message.

  I use a Toshiba external drive with 500 + GB.  I have a lot of room.  I tried twice.  The first time I reformatted the external drive using Windows and revived the full backup only.  Once again the image file on the external drive shows 0 bytes, 0 files.

  I wonder why the backup files are not getting moved on the external drive.

  Hi BEM Consult,.

  1. are you allowing Windows to choose recommended backup or you choose "Let me pick" option on the backup configuration window?

  We recommend that you connect the external hard drive on another computer and check if the size of the backup file is in the list.

  Check if you have selected all the items in the backup settings to create a backup file. Try to create a new backup file by selecting all items on the Backup Wizard and check the result.

  See set or change automatic backup settings

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Files copy automatically to the external drive to the basket.

  Hello

  Q.1

  Whenever I'm copy/move files from my computer to a disc external hard or vice versa, I often had the message prompt "are you sure you want to copy this file without its properties?  The XYZ file has properties that cannot be copied to the new location.  YES/SKIP/CANCEL.

  Please advice why I got this message and what it means.

  Q.2

  Very that often, when I left and I deleted my external thumbdrive or a portable hard drive to my computer, I noticed that the trash on my desk was filled with a lot of files/folders that I have recognized that they were things of mine, but I did not understand how they appeared in the trash at the time when I did not remove my external hard drives before I left my computer.

  Then, when I plugged my external hard drives to check if these files/folders had been accidentally deleted quickly, I found that they were still there.

  This kind of incident occurred in Windows XP-based computers and Windows 7.

  Please indicate why/how this could happen.

  BTW, I couldn't find a correct classification for my two above questions in your Inbox "subject and Windows applications.  Therefore, I selected no matter how one.

  Thank you

  glemel

  Hello

  It's something the files or settings on the external pilot, I recommend you to perform a full backup of the data of the external driver and then format the external driver and check if it helps.

• Starts the Powerbook g3 pismo of the external drive?

  Hello, all,.

  
  

  I want to start my Powerbook G3 (Pismo) running OS 9.2.2 since the restore in one disc external hard drive. (PB knows he has a drive hard internal , but the drive does not read discs in there.) The computer goes up the disc - its own restore disk - when it comes starts with Macintosh HD as a player start, but when I try to use the restore disc as commissioning, starts to drive to go up, but the door opens. Even if I hold the door closed, the computer starts low to halfway and glued in place: first, the question mark flashing, then commissioning with Macintosh HD but then freeze it.

  This happens even if I chose as the startup disk restore disk in the startup configuration panel. This means that I can't even begin to use disk utility to clean the hard drive of the computer. I did that with two other computers (reset several times), but those who had internal functioning disks. Is it possible that I can do this computer using the external drive as the boot? I read that the G3 Pismo that allows. I know I can get someone to take out the hard disk and smash, but I expect much prefer to destroy it myself. And I can understand how to remove the hard drive, but it seems to imply a boatload of maneuvers and some tools that I have, at the present time. I would not completely destroy the computer. It would be good for recyclers to be able to retrieve some parts, though they might be useful to someone.

  It is possible that I can't boot from the restore disc in the external drive, but maybe there's something that I have not yet tried. It seems crazy that the external hard drive with the restore disc appears on the desktop with a normal restart, and I can choose as boot drive but can't seem to complete commissioning. If anyone has any ideas on this subject, I would appreciate it a lot.

  Thank you.

  Jenny

  Are you trying to boot the PowerBook to an external optical drive that is connected to a USB port or your external drive connectivity FireWire?  If it is USB, that is the problem.  The reading of an optical drive connected by USB is one thing, but start since it is a different matter.  Unfortunately, your Pismo is not capable of this.

• New itunes install. All the songs are on an external hard drive. A lot of songs do not show up in itunes, but they are in the folder on the external drive.

  This seems to be a common problem:

  Recently I had to reinstall Win 10 & then itunes. All the songs are on an external HD iTunes does not show a large number of songs that are in the folder on the external drive. I copied the .itl to the new itunes folder. I also tried holding down - from itunes shift - select a library. Any ideas how to be able to see the songs in the itunes on the hard drive folder in the itunes library?

  Thanks in advance

  Steve

  See make a library of portable split. Have you copied the correct .itl file, or should you connect an external hard disk .itl file? If you can find the correct .itl, it should have all your songs and playlists. See the empty/corrupted after upgrade/crash iTunes library when the library has been altered for the first time with the new system. If you have to start creating your new library in an iTunes folder to the root of the external drive and move all the media inside... \iTunes\iTunes Media before adding to the library.

  TT2

• How can I initialize with a previous osx of the external drive?

  About 4 years ago I installed Snow Leopard on an external drive while I was running Snow Leopard on the main drive. I wanted to load a lot of video on this player to be able to use the version of Snow Leopard of iMovie when I updated the main drive. However, when I upgraded to the Mavericks (recently in Yosemite), he would list is no longer the disc of Snow Leopard when I pressed down option. And when I went to preferences/Startup and chose to start with Snow Leopard, it would not be completed the boot process.

  If I use disk utility and create a partition to use for initializing with Snow Leopard, space-how much should I assign this partition? The external drive is 1 t and it is full of 50%.

  Also, I have a 500 GB internal drive I removed a Mac deceased and put in an envelope. There are also Snow Leopard. After the partition is created, can I exchange the two external drives to be used on the same partition? What I want to do with the box HD's boot up with it, then install Mountain Lion.

  I want to give to anyone who helps me the credit, but I have 3 questions under one heading. Is there a way to get triple credit?

  I'm starting to get lost with all these drives, partitions and 4 versions OSX.

  I wonder what happened to your old Snow Leopard.  You always use the same computer that you used with Snow Leopard? A Mac can start only in the operating system with which it is originally came or newer.  Your profile information from computer to the bottom of your post mentions a 2012 MacBook Pro which is not a Snow Leopard machine.

  How much space depends on how you'll use it and how you configure.  I would like to make at least 30 GB so there is a little space, wiggle but if you start to install the applications then 60 + GB.

  I know most recent disk utilities are supposed to be able to resize partitions without erasing but I'll make sure you have solid backups first.

  You can assign a 'resolved' and two "helpfuls".

• Can't burn music on the internal CD player so how do we change to use only the external driver to burn CDs?

  My CD drive doesn't work, so I bought an external CD drive.  I can rip music from the new drive, but when I want to burn I don't have the option to burn on the internal drive that no longer works.  How can I switch (permanently) to my external CD drive?

  Hello

  · What is the number and the model of the external drive that you use?

  · You use windows media player to burn the disc?

  · If so, what is the version of windows media player on the computer?

  You can check the link below: how to copy music to and from an audio CD in Windows XP: http://support.microsoft.com/kb/297015/en-us

  How to copy information to a CD in Windows XP: http://support.microsoft.com/kb/306524