deletion of the batch files
Reference: HP Photomart C7180 all-in-One
Vista operating system
Error 1905
How to remove my computer HP batch files?
According to Bob_Headrick,.
The General procedure goes something like this: download the full driver for your printer from HP here. Run the Setup program, but abort the process (or just stop respond to guests) when you get to the section on the selection of options. Now navigate to the temporary directory of the system, in general you can find it by opening 'My Computer' and type folder in the address bar. In this search for a new directory starting with 7z... directory which are created when Setup was run. Navigate to this directory in the util\CCC directory and locate the uninstall_L1.bat file. Run it by clicking on it and selecting 'Run as administrator'. Repeat for uninstall_L2 by uninstall_L4. A few reboots may be required after some steps.
Once all the steps for uninstalling were conducted then to abandon the installation process if it is still ongoing and delete the 7z... directory.
For some products, there is a utility 'scrubber' which makes the job easier. Click here, and then put your printer model in the box of the product at the top while maintaining "all-in-one raccoon" information in the question box.
I hope this helps!
Tags: HP Printers
Similar Questions
-
Create the batch file to remove log files in Windows
We are running Oracle 11 G under Windows 2008 R2. For free tickets, we run daily from rman commands manually. I would like to create a batch to do it automatically. This is the batch file that I created.
The echo Yes | Del Y:\Orace11g\temp\*.*
Robocopy D:\Relius\Admin\RADB\ArchiveLogFiles\ Y:\Orace11G\temp\ b / mining: 3
RMAN
connect sys@radb target;
password
overlap archivelog all;
remove expired archivelog all;
Yes
but it stops at rman
C:\ > rman
Recovery Manager: release 11.2.0.1.0 - Production on Mar 21 10:49:27 Oct 2014
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN >
What is the correct way to cerate the batch file to delete the expired archivelogs?
Hello
It is not a problem of RMAN, but is that a batch under windows creation/configuration is the problem.
See this URL, how do I Configure a tasks scheduled under Windows 2008 R2.
-Next, create a file .bat with your instructions:
Set ORACLE_SID = radb
set ORACLE_HOME = c:\dbhome
RMAN cmdfilemyrmancommands.csv msglog = sys/PASSWD@radb target = c:\log.log
- Then put your RMAN commands in the file myrmancommands.csv
Run {}
devote to the disc channel type c1:
overlap archivelog all;
remove expired archivelog all;
output channel c1;
}
Best regards
-
How to upgrade a driver automatically in Windows NT by using the batch file
I use the devcon tool to update a Windows XP driver, but unfortunately it does not support Windows NT. So I'm looking for a similar tool for Windows NT. Does anyone know any tool / or script that would update a driver via file/command line in Windows NT?
Thank you for taking the time to read the question.
Hello supportalcon,
Thank you for the question!
It is disheartening to know that have problems you with the Windows Driver. As I understand it, you need to update a driver automatically in Windows NT by using the batch file.
The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums. You can follow the link to your question:
http://social.msdn.Microsoft.com/forums/en-us/categories/
Meet us if you face any problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
-
Had two files the same titled and deleted somehow the wrong file - how can I restore it
original title: deleted the wrong file
Had two files the same titled and deleted somehow the wrong file - how can I restore it - tried everything
Hello
This forum is for comments on the forums for answers. This should arise in the answers-
Forums for your version of Windows Windows.Answers - Windows Forums
http://answers.Microsoft.com/en-us/Windows-------------------------------------------------------------------------------------------------------------
Recuva - free - recovers files deleted from your Windows computer, Recycle Bin,
map of the camera digital or MP3 player. And it's free!
http://www.Piriform.com/RecuvaForums - help here
http://Forum.Piriform.com/I hope this helps.
-
Why not be able to run MRT.exe using the batch file?
When I run the following script using the batch file, MRT cannot be run.
Does anyone have any suggestions?
Thanks in advance for your suggestions
off @echo
C:\WINDOWS\system32\Mrt.exe/q/fHello
· The computer is connected to a domain network?
· What is the error you get when trying to execute the batch file?
If the computer is connected to a domain network, I suggest you to report this issue in Windows XP IT Pro Forums: http://social.technet.microsoft.com/Forums/en-US/category/windowsxpitpro
Thank you.
-
To open Internet Explorer as a background process in the batch file
I need to write the batch file, which will open Internet explore it as a background service/mode (which you don't mind the user).
Thanks in advance
Paritosh
Hi Paritosh,
The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.
http://social.msdn.Microsoft.com/forums/en-us/categoriesHope the helps of information.
-
How to adjust the volume to specific levels by using the batch file?
I use Windows Media player and want to adjust the volume level automatically using planning.
Anyone have any suggestions on how to set the volume level by using the batch file?
such that 0 is mute and 10 max, I want to set the volume 4
Thanks in advance for your suggestions
Eric
Hi Eric,.
The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.
http://social.msdn.Microsoft.com/forums/en-us/categories
Hope the helps of information.
-
Automatic execution of the batch file at the connection of the USB drive
I created a batch file that checks the drive e. the presence of a specific file, and if there, copy it to a location on the hard drive. (Drive E is where all USB drives see the place through my window of Windows Explorer.) I would like to set up my computer so that this batch file is executed whenever such a device is plugged into the USB port. How can I accomplish that?
Otherwise, is it possible to incorporate the Attaché-USB-player status in the batch file itself and just leave that batch file running at any time? I used "IF EXISTS E:\*.*", but that is not do me much good, because I have to keep control of this condition again and again, and eventually the batch file gets tired of the audit and said that the drive does not exist.
Hello
You can ask your question on the TechNet forums for batch files.
http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro
-
Simple two program start and kill the Batch file
Hello all :)
(Today) I am new to the script of the machine. It is something that I put in place and will try tomorrow.
CD /d "C:\path".
Debut.batCD /d "H:\path".
Beginning Program.exe: CHECK
ping localhost 10 1 n > ZERO
AV TASKLIST /fi "IMAGENAME eq program.exe" 2 > & 1 > NULL
IF ERRORLEVEL 1 GOTO CHECKTaskkill /f /im cmd.exe/t
If all goes well, .bat runs. A program will be executed. CMD will then search for program.exe until not found (released), then close the CMD.
In this case program.exe does not work with start/wait
I wonder if the check will slow down my machine if worked for a few hours.
I use Windows 7 x 64, SSD, 16 GB RAM and AMD 8350.
Considering the insertion of a small time-out, but seems ridiculous.
Is there a way to slow down the check, but always close immediately if program.exe is closed? Other alternatives? Thanks :)
The original manuscript of lots above is more suited for a loop that could sleep until needed, thus reducing CPU cycles
-> You can easily find it by yourself:
1. launch the batch file2. start the Task Manager.
3. click on the performance tab.
4. Add the "CPU Time" column.
5. sort the list next to the name of the task.
6. take note of the time CPU for cmd.exe.
7. check once again the batch file run for an hour.
I bet that time CPU will be negligible. I expect the timeout function to be very frugal. Tasklist.exe takes more time, but it runs only once every 20 seconds.
-
How to reset the default program to open the batch files?
Original title: I have a batch file and I've changed the default opener of the batch file, HOW to reset it so my batch file work properly again?
I have a batch file that I use allows me to select a list of websites that I frequent. I accidentally changed the default opener of the batch file, HOW to reset it so my batch file work properly once again, now when I run it it opens for editing.
Hello
Control Panel - default programs - associate a Type of file or Protocol with a program.
Here's what it should be:
description = current Application of the Windows Batch file .bat = unknown application
You can use the methods here for re - associate the file type:
Restore the Type Associations by default Windows 7 file Extension
http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.htmlIf necessary, this can be used to not associated with the file type.
How Unassociate a Type of Extension file in Vista and a utility to help (Windows 7 too)
http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Should I have the administrator account to run the batch file?
When I log in as administrator, I run after the file of commands without any problem, but
When I login as a user, I can't run after the batch file, the changeover of the authority.
I would like to know if I need to log in as an administrator to run this batch file or not,
Can I use different accounts group? and always perform this task.
Does anyone have any suggestions?
Thanks in advance for your suggestions :>off @echo
echo copy C: d:RoboCopy C:\ /MIR R:1 /W:1 D:\
ECHO doneHello
To respond to your request, you must enter the administrator password to access this command file.
Instructions for Windows 7
In order to run as administrator, create a shortcut to the batch file.
1. right click on the batch file, then click on copy
2. navigate to the location where you the shortcut
3. right click on the background of the directory
4. select Paste shortcut
Then, you can set the shortcut to run as Administrator:
1. right click on the shortcut
2. Select Properties
3. in the shortcut tab, click Advanced
4. check the box "Run as Administrator"
5. click on OK, OK
Now when you double-click the shortcut it will ask for confirmation UAC and then run as an administrator (which as I said above is different than running under an account in the administrator group)
I hope this helps. -
I, stupid, changed the program by default to a BAT file to the cmd prompt, well, now I can't run the batch files now, please help!
Hi William,.
Welcome to the Microsoft community.
Batch file is a type of script file, a text file, containing a series of commands to be executed by the command prompt. When you run a batch file, it opens the command prompt to run the scripts.
It would be great if you can answer the following questions:
1. what happens when you try to run a batch file?
2 are. what batch file you referring?
3. the problem occurs for a particular batch file?
First of all, I suggest you to check the commands written in a batch file. To do the same thing, just right-click on the batch file, and then click change. It will open Notepad with the list of orders scripted for this particular batch file.
If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.
-
Automatic execution of commands in the batch file
When the batch file containing the following commands is executed, orders of the line 1, 2, and 3 are executed, but the 'TIME' command is executed after that I closed the "EXCEL." I want the command 'TIME' to be run automatically without needing to close the 'EXCEL '. Could you please suggest a way to do it.
CLS
TASKKILL /IM "" EXCEL. "." "EXE" / F
C:\PROGRA~1\MICROS~2\Office14\EXCEL. EXE
TIME
The code must be in the following form:
CLS
TASKKILL /IM "" EXCEL. "." "EXE" / F
Start/b C:\Progra~1\Micros~2\Office14\EXCEL. EXE
TIME
-
I want my procedure to return the error message in the batch file
Hi team,
I have a requirement from users of the company. Could you please provide your suggetsion to achieve this.
We have a batch file that is short on time, in this batch file, I'll call you a SQL script.
In the SQL script, I called you a procedure to run.
Inside the procedure, I have the following statement,
Select, insert and update commands.
and I use ANOTHER exception to handle errors.
My requirement is to pass the error messages for the batch file when one of the orders was not not run and send a notification e-mail to the group with the error text.
Please provide your suggestion.
Thank you and best regards,
Robette.
Could you please tell me, inside the procedure I have to remove the OTHER exception and how I can pass the value to the command file and where I add the content of the e-mail notification.
I suggest that you write modular code instead.
1. create a log table
2 modify the procedure to log on to the error log table or exceptions
3. that others suggest have the recovery/return procedure an exception in the client/batch file
4. for an exception have the batch file to call a procedure to do the emailing if there were exceptions
IMHO, it's a MISTAKE to try to put all these features in a single file. It is NOT scalable and makes it almost impossible to update the batch file if the requirements change in the future.
Logging should be a separate process with a separate log table so that you can capture ALL of the information that may be necessary, now or in the future. Enter information in a table of newspaper, it is EASY for ANYONE to query to see what problems are occurring in the process.
Emailing should be a separate process so that it can be used for your batch file current, files of future orders or even by procedures or functions in the database.
Do not try to create a solution "a script does everything."
-
File filter errors in the batch file
Hi all.
I can't filter element in the home folder of batch file.
File is very long number.
When you use the batch file filter item. Filter by folder
Filter file is intger but real record is long.
Thanks for your suggestions.
Hoan
Hi Hoan,
Bug 17919457 : MANAGER of REPO THROWS WARNING WHEN RECORDS DCOLLECTIONID EXCEEDS the ENTIRE VALUE of MAX
Try searching for it in support of oracle. You will get the solution to your problem.
-Prashant
Maybe you are looking for
-
Time Capsule will not extend the Airport Extreme network
My airport extreme (do not know what version... can't even find it in the system report) offers a WiFi modem. I have a Time Capsule 4 G which extends the network. This works well for a few years now. Suddenly, the CAP began flashing yellow. Time caps
-
The RAM and HARD drive upgrade
Hello I put my laptop, at level 8.1 Windows 64-bit, Intel Core i7-4700MP @ 2.40 GHz Currently 12 GB of Ram - 8 GB & 4 GB Kingston DDR3 Currently 1 TB Toshiba HDD http://storage.Toshiba.EU/CMS/en/HDD/computing/product_detail.jsp?ProductID=409 I'm look
-
Maybe corrupted SHLWAPI. DLL header checksum does not match the checksum calculated
Microsoft update killed my computer and now can't find any people of microsoft to solve the problem. It also seems that creators of the system create problems and then want to pay 50.00 dollars to fix. UM. A person standing and help?
-
Ringtones no longer work after ICS
My Razr had made ICS this morning. Now, I have no ringtone. Yes the silent mode is disabled and the volume all the way up. If I go to 'system setting', 'sound' and try to change the ' phone ' or "default notification", the GET, the message "system An
-
BlackBerry Z10 locked out of phone, do not accept the password
Hello everyone I have a Z10 kept in a drawer for a long time almost 3 years, I decided to use it again, I forgot the password and ID Blackberry when I can't provide the right cell phone password lock... I would like to know how to get my phone back a