Dell 2005FPW screen

Similar Questions

• (Dell LCD) screen goes blank when I connect. Requires the switching on of the screen on and outside

  (Dell LCD) screen goes blank when I connect.  Requires power to the power on and off screen, at least 15 to 20 times before picture stays on.  Any suggestions? No to the problem site so don't have the model numbers.  Dell computer and about 8 years.

  Looks like your monitor is having problems sync-ing for the resolution settings that you have defined for your monitor.  When you get your screen is displayed, right-click on an empty area of your desktop-> properties-> (tab) settings.

  Then, in the 'Screen Resolution' area, try to move the cursor to the end of 'Less' and click 'apply '.  It will then try to change to this new resolution.  If your screen is empty for now, just wait about 30 seconds and it will return to the previous resolution (which can mean that you need to power cycle your monitor you have done to get it back)-otherwise accept the settings if your display looks OK.  Try to find a solution that works with your monitor.  It is also possible that your monitor is going bad.

  HTH,

  JW

• krst Checkpoint error - when my computer starts, that it starts to power, but then turns off when it is at the Dell logo screen

  When starting my computer it starts to turns on then shuts off when it gets to the Dell logo screen.

  How can I fix?

  Hello

  Try the methods in the links below and check if it helps.
  Windows XP restarts unexpectedly or restarts when you shut down the computer
  http://support.Microsoft.com/kb/320299
  
  Windows XP restarts when you try to shut down your computer
  http://support.Microsoft.com/kb/311806
  Windows XP stops and automatic restart problems
  http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02may13.mspx
  
  I hope this helps.

• Dell computer with windows vista. I turn on my computer it boots up to the blasck with the dell logo screen, then goes to a black scree requesting a password, how can I get around this.

  Dell PC. When I turn on the computer Dell black screen appears as always put then it goes to a black screen asking for a password.  I don't remember set the CMOS passwords.  Help, please

  Hello

  If she asks for a BIOS password, contact Dell

  http://support.Dell.com/

  I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• meeting place for Dell pro screen flashing on make or receive a call

  Hello

  My place of dell pro screen start flashing once the call is established. Sometimes, the screen remains black as if swithced off. This happens all in making a call or once I answer a phone call. The touch screen is disabled for the duration of the call. Once the Group at the other end disconnects screen becomes active again. I called dell support and they advised to reset to the factory settings. Tried, but the problem still persists.

  Please tell us what needs to be done.

  Thank you...

  Hello

  Had the same issue, but took off the protective film that came with the phone and resolved immediately.

  The default phone has a battery mode that disables the display when it in next to you ear and an appeal is in economics.

  Seems the protective skin band prevents the phone to detect when its next to your ear

• Dell touch screen not working not not with Quickbooks pos 2013

  Hi all:

  First time here; has someone encountered difficulties with any touchscreen monitor Dell (DELL E157FPT) running on a Windows7 computer Dell Inspiron professional when using the new software QuickBooks 2013?

  I am a Tekky guys and have ordered a replacement from Dell touch screen (he did not here yet) and the Dell Inspiron is brand new (purchased in Mar.2013), and it was working fine until my Office Manager downloaded and installed the software of 2013 QB pos on the pc.  After that, he was up and down like a yo-yo.

  All met with similar problems, or suggestions regarding the fixing of this are welcome!

  See you soon!

  BIGBEARJEDI

  Big Bear Lake, California

  Hello

  QuickBooks POS 2013 is compatible with Dell E157FPT touch screen.

  Check out the link for more information.

  Point of sale: HCL

  You can also contact Support QuickBooks and check.

  It will be useful.

• Computer Dell laptop screen goes black

  The screen on my laptop going black shortly after turning it on.  It's a Dell 1525 inspiron about 5 years.  Have plugged an old monitor inside and it works but technically sound now your desktop!  Someone else has encountered this and found a solution? I tried to increase the State min and max CPU to 100% as someone suggested, but he did not.

  Hello

  Sounds like the material if you need assistance from a real computer store (one that works on Dell
  internal laptops) or Support of Dell. Also check Dell to get a documentation, drrivers and ask
  the Dell Forums on known problems with this model.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Start stuck at the Dell logo screen

  Hello

  I have an inspiron nine 5447, which was working fine until yesterday. If I try to start now, it's just stuck to the Dell logo and I can't go in the BIOS settings. I tried pressing F2 and F12, but the screen is still stuck at the same screen of the Dell logo. Can someone help me with this.

  Thank you

  Nikhil

  Hi Nikhil,

  External devices (except AC adapter) connected to the computer. If so, disconnected the and try to turn on the computer.

  If it's the same situation, and then turn the computer off. Key down, then and now the power of FN key on the computer.

  In the case, the computer is blocked at the Dell logo. It's a hardware problem, contact Dell Technical Support in your region to replace the parts.

  I hope this helps...

• Laptop Dell - blue screen of death - CRITICAL_OBJECT_TERMINATION caused by driver: ntkrnlpa.exe

  Hello

  I searched for a solution to a major problem, as we have seen with some Dell systems I work with.

  three models who know that exact blue screen: Dell E6430, E7240, and E7440.

  Every accident is due to random, indicating the following:

  Bug Check String: CRITICAL_OBJECT_TERMINATION

  Bug check code: 0x000000f4

  P1: 0 X 00000003

  (the others are always different)

  Caused by the driver: ntkrnlpa.exe

  Address: ntkrnlpa.exe + dedd8

  32 bit OS/processor.

  So far, we tried the following:

  Update the BIOS of the systems to the latest versions.

  Update the version of the driver from the hard drive from the site of the manufacturer (not one Samsungs)

  Replace most of the internal parts (motherboard, RAM, CPU) with known work of Dell parts.

  Recreate the image on the computer entirely. (re - install windows, but still receive the error re-)

  In the end, we end up making a complete replacement of the HD.

  We carried out Diagnostics using a few tools (SMART data reading using SpeedFan) and it is not to report all errors. We used the Dells built in the diagnosis on the RAM, hard drive and nothing seems made of any hardware failure during testing of large 4 hours.

  I was wondering if someone had met these blue screens on other systems, and what other tools and resources, we could use to try and fix these without doing a complete system replacement.

  The most recent crash in this issue is 29 October so it may not be the same as the current problem

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

• Dell flat screen monitor appears to be generic monitor

  I've seen several posts with no solutions.  I just Touchsmart 15 t with a 3.0 Targus docking station.  Monitor flat screen Dell as second screen quality is very bad.  Device Manager shows that the monitor has a generic driver.  I downloaded the driver on the Dell website, but Device Manager will not be updated with the new driver.  There are generic.  Is it possible to have my second screen (Dell) properly with the correct driver?  Thanks for your help!

  Hello

  You have 3 providers for a single connection here. I still believe that the man in the middle is the problem. Please install driver Firmware and video for it on your computer and try again:

  http://www.Targus.com/us/download.aspx?region=7&SKU=ACP70USZ

  Kind regards.

• Attach a new TV to my desktop Dell flat screen

  I have a Dell Inspiron 580 (March 2010) under Win7 Home Premium SP1 installed. I'm running 2 monitors with NVIDIA GeForce 9500 GT graphics card.

  I want to set a new flat screen TV through the HDMI ports on the TV and the computer. I can't see the TV from the computer. Cable and the TV that all HDMI ports work so either to the computer's HDMI port is faulty or the version of Windows 7 is unable to stand the TV... or maybe the NVIDIA card is involved.

  I think it could be put in place so that I can direct the output from the computer to the TV or the 2 monitors. Maybe it's time for a new computer?

  Yes, you need a new video card that has a HDMI port.

• (Solved) Mac OS Sierra 4 K with Dell P2715Q screen resolutions

  (original post completely changed)

  After upgrading to OS Sierra, Mac OS does not recognize correctly apparently my Dell P2715Q monitor and would not offer the complete list of resolutions.

  A number of reboots solved the problem - resolutions are fully available.

  in the display control panel click on the chipped by holding down the OPTION key

• My Dell Latitude screen is oriented at 90 degrees to its normal appearance

  My computer screen is oriented 90 degrees from normal and I have to hold the laptop on its right side to read the screen.

  Hold down the CTRL + Alt keys and turn it back with the arrow keys. Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Reference Dell D600 screen grainy (red)

  Hi all

  I had trouble with a Dell Latitude D600 laptop computer. I photographed the machine with an image that we use for our other D600s Dell and there seems to be a problem with the video drivers and wireless. I was able to find the right driver for the wireless, is not one posted on the Dell Web site however.

  Whenever I have start Windows with computer red streaks start showing on the desktop. I know that this is not a hardware problem (or rather hope not) because BIOS looked normal and I uninstalled the driver Radeon 9000 and he returned to the Standard VGA adapter, which although blurred showed without streaks. I'm went to the Ati site and downloaded the driver update and still experienced the same problems.

  I was wondering if it was a quirky graphics card and how I would discover it? I tried utilities such as DriverGuide Toolkit, but they stressed the Mobility Radeon 9000 card. Any suggestions?

  -Paul

  
  

• My Dell screen opens but my OS does not load

  I tried to boot in safe mode to maybe make a system restore, but once I chose my OS black screen fills only to halfway to the top with file allocations, the last being listed is a pilot, then everything just stops and lies, I tried safe mode prompt to manuelly enter a restore point same result. I did not have any windows CD even a boot disk, I know that the operating system is Windows XP home edition [I know it's old] I know not what service pack was finally installed. I have my desktop to download and burn property. Oh yes my laptop is one in place. I even touched option "last known functioning blah" same result, in order to take me from here, can you tell me where I can d/l a boot disk, maybe try this way or help me somehow. Oh yes, I even went to the symtom of the dell F12 screen tree and all tests passed. Past the same one who is named after my specific problem "OS does not load" test lasted a little more than 2 hours and as I said, I don't understand, but I don't know I need to get at least one more time and send me some files or burn at least they are very extreme inexplicably signifigant.

  Thank you

  Sincerely,

  Eve

  Standby,

  NO disk, move it to the bottom.

  You want the cd/dvd-rom on top and the hard drive listed then, then the order is not serious.

  With removing usb devices listed earlier, when items are fixed, as a printer with a card inside, iPod, etc., the computer tries to boot from them. Is usb all devices are removed except for the keyboard and the mouse, the computer should boot normally.

  Make these changes in BIOS allow you to keep the printer and the attached iPod.

  Rick