Dell Dimension 9200 MAX UPGRADE

Similar Questions

• The Dell Dimension 9200 graphics card upgrade

  I am looking to update my graphics card on a Dell Dimension 9200 and I was wondering if the Nvidia GeForce GT 430 would work with the pc, I have a Nvidia 7900 gt. I am open to both recommendations.

  My current pc features, Windows 8 version Preview (upgrade to windows 8 Pro in a few days), 4 GB of ram, intel dual core 2.13 ghz.

  Hi gaz492,

  The graphics card you have mentioned should work on the Dimension 9200.

  Food that has been delivered with the computer is 375W which is more than the bloc power to the graphics card. Details of the graphics card: http://www.geforce.com/hardware/desktop-gpus/geforce-gt-430/specifications

  In addition, providing the link for the specifications of the computer:

  NOTE from the ADMIN: Broken link has been removed from this post by Dell >

  Add the link to the manual for Dimension 9200, which is also known as the XPS 410:

  There are a lot of compatible adapters to the computer: here is a list of the latest graphics cards that run on the desktop computer:

  1. nVidia GeForce GT 440.
  2. ATI Radeon HD 6570.
  3. ATI Radeon HD 6670 (requires minimum 400W).
  4. ATI Radeon HD 7750 (requires minimum 400W).

  Usually if the video card is updated on the computer, you must upgrade the power too as the power supply on this computer is 375W.

  Answer please if you have any other questions.

• Dell Dimension 9200 (XPS 410) boot - dead?

  5-year warranty, but it is 5 y 11 months unfortunately >:)

  Data sheet: 2007 Dell Dimension 9200 (XPS 410 United States), Q6600 quad core, 4 GB RAM, 320 GB HD, Windows Vista, graphic of 8600GT 256 MB PCI-E x 16, tv PCI-E x 1 tuner card (do not), Dell LCD 22 monitor ".

  Brief history and prob: weird, early on, the hard drive must Access all seconds for a few years, never understand this. 2011 major problem does not start, fan on max, diagnostic light code that turned out be meaningless... surprisingly reinstallation of the graphics card has helped a bit and fact pc usable again... Mistakes became gradually less severe, it was weird. they tried to say it's a software problem, but this seems unlikely since the restore to factory condition (and the loss of some data) had not helped at all. Next years two ok. Two days ago it started not just and necessary a few reboots. Found this morning frozen on the black screen of Microsoft and had to hold power to turn off. (itself awoke to a windows update then died?) Tried to start, but it froze on the start of the BIOS set up screen, no keyboard no nothing and got the same old code "123" diagnosis, but even when there is no such code. Repeated several times. Tried reinstalling video card about 10 times, including the removal of tv card for its use of non - no and light code now diagnosis '34' are for failure possible extension of the map (not the graphics card... but there aren't any other card it must be the graphics card). No picture monitor at all now...

  Reference dell cruise forums seems to accuse 9200 motherboard...
  Can try to reset the CMOS jumper?

  I wish dell had corrected it when it was in warranty.

  Any ideas? I don't have another card PCI-E PC or graphics to cross check... worth buying another graphic card to try? You want to save pc if possible. Thank you.

  
  

• Dell dimension 9200

  Hello

  Can someone tell me what ram I need for a dell dimension 9200 please. I need to replace it, but read that someone used 8 GB and it works fine. Dell has the max is 4gb.please help.

  mandymoped

  Does anyone know if 8 GB will work with 32-bit vista please

  mandymoped

  When you have a 32-bit system, it does not recognize the 8 GB memory, 3±gb, is a 32-bit system can address.

  Basically, what this means, is so that you can install 8 GB of memory in the system, the reason for which it will be not recognized, is mainly due to 32-bit processors and 32-bit memory address limitations on applications.

  64-bit processors & operating systems will recognize the limit of 32-bit.

  Bev.

• CPU upgrade Dell dimension 9200 core 2 duo 2.4 Ghz processor

  I was wondering if someone could help me.  I know that it is not supported by dell, but I want to upgrade my processor at the maximum speed supported by my Dimension 9200... I currently have a 2.4 Ghz cpu and bought an E8500 3.16 Ghz, which is NOT compatible... I was wondering if I could go with an E7300 2.66, I I think the problem is with the speed of the bus--the E6600 and E7300 are the two 1066 Mhz but the E8500 and E8600 1333 Mhz.

  Can anyone confirm that the E7300 2.66 / 1066 Mhz is compatible...?  Thank you.

  Steinomite

  OK so just to confirm that I will buy the CPU... I can get a core 2 duo for a core 2 Quad... as long as I get a Q6700 2.66 GHz... correct? for a Dimension 9200... Thank you.

  Yes, the XPS 410/9200 will take up to Q6700, processors FSB 1066.

  Bev.

• Upgrade a Dell Dimension 9200 360 GB Raid to 2 TB hard drive

  Hello

  I have tried this modernization and taken on drives of 160 GB 1 and put in disk 2 TB and started the PC and it did not work I tried 2 different locations.

  Can someone help me by telling me what I have to do

  to install disk 2 TB on my Vista PC running.

  I need to install my dell Vista-CD/CD?

  your help will be greatly appreciated

  Assuming you have RAID 0, RAID was probably set up to be the bootable hard drive.  If you delete one of the disks, your RAID will be completely disabled and the computer will not start.  The Dimension 9200 has six SATA ports, two upward by themselves and four other together towards the middle of the main map.  When one of these machines has been ordered with RAID Dell normally placed disks RAID on the third SATA ports and fourth, leaving the first two either vacuum or place the DVD/CD drive on the second of the two ports that reach by themselves next to the power supply.  You should be able to add your Board of 2 TB in two ways; Place it in one of the two ports next to food, or use one of the either the port of fifth or sixth sitting by the RAID.

  Once you have the new drive installed mechanically, restart the computer and use F2 during the self-test to reach the configuration of the system.  This page shows the BIOS how you want the computer to deal with its various devices.  Go to the screen that shows all your SATA devices and make sure that the port with your new hard drive is turned on.  If you skip this step the computer ignores your new drive.  Once you have done this and left the installation of the system, you will need to find the disk on your computer Manager so that you can initialize, partition and format the new drive.  You must configure a partition, even if you want to use the entire disk as one partition before you can format.

  A word of caution: computers some Dell's have some difficulties to accept a hard drive placed on a track numbered higher than the DVD/CD drive.  If you use the ports by the RAID drives and find you have problems using the new hard disk, you will need to plug it into the port of the first or second, depending on which is not used by the DVD/CD drive.  The RAID drives are not normally affected by this problem because they are managed by the ROM of RAID Intel and the computer does not see them as a SATA hard drive.

• 2 TB hard drive for Dell Dimension 9200

  I have a 3 years Dimension 9200 desktop with 2 X 160 GB hard drives configured as a RAID 320 array.  I want to move to a single 2 TB hard and I was wondering if someone could advise me if a Seagate Barracuda XT ST32000641AS - buffer of disk hard - 2 to - internal - 3.5 "-SATA-600 - 7200 rpm -: 64 MB would do the job."  Otherwise, what is that limit the upgrade?  Is there more to consider otherwise if it is a SATA hard drive? Someone at - it other recommendations? My apologies if this message sounds like it is a novice to updates - the reason is that I am!

  There is no reason from a material point of view that a 2 TB drive would be a problem in the Dimension 9200.  Just considerations common to install a SATA drive.

  You install Windows XP?  If you use the installation disc is a labeled Dell installation disk, SATA drivers can be already integrated in the drive.  Most Windows XP installation diskettes, however, won't these drivers so that the computer hangs during installation, typically have reported that a hard disk cannot be found.  If you find that this is the case, go to the system configuration (F2 during the self-test after starting or restarting the computer), then assign the controller SATA RAID Autodetect / ATA.  This parameter allows to use the native IDE drivers on the Windows XP installation disc.

  If you use Vista, you should have no problem Vista installation media should have native SATA drivers.

  Manuals for your computer are available at support.Dell.com.  The service is currently not available, but should be back before long.

• Dell dimension 5150 Cpu Upgrade help?

  Hi, I have a dell dimension 5150 3 GB of ram I currently am all an Intel Pentium d 2.8 ghz (LGA 775), and I was wondering what is the best upgrade can take my motherboard 0HJ054. Full specifications below.

  -Plug-

  TXT of CPU - Z report
  -------------------------------------------------------------------------

  Binary files
  -------------------------------------------------------------------------

  CPU - Z version 161.2

  Processors
  -------------------------------------------------------------------------

  Number of processors 1
  Number of threads 2

  APICs
  -------------------------------------------------------------------------

  Processor 0
  -Core 0
  -Wire 0 0
  -Core 1
  -0-1 wire

  Information for processors
  -------------------------------------------------------------------------

  Processor 1 ID = 0
  Number of cores 2 (max 2)
  Number of threads 2 (max 2)
  Name Intel Pentium D 820
  Codename SmithField
  Specification Intel (r) Pentium (r) D CPU 2 .80GHz
  Package (platform ID) Socket LGA 775 (0x4)
  CPUID 4.7
  F.4 extended CPUID
  Core Stepping B0
  90 nm technology
  Basic speed 2796,3 MHz
  X FSB multiplier 14.0 x 199,7 MHz
  798,9 MHz rated Bus speed
  Stock frequency of 2800 MHz
  Instructions sets MMX, SSE, SSE2, SSE3, EM64T
  Data L1 cache 2 x 16 KB, size 8-way line set associative, 64 bytes
  Hidden trace Kuops 2 x 12, 8-way set associative
  L2 cache 2 x 1024 KB, size 8-way line set associative, 64 bytes
  FID/VID control not

  Chipset
  -------------------------------------------------------------------------

  Model of motherboard 0HJ054
  Northbridge Intel i945P/PL/G/GZ Rev A2
  Southbridge Intel 82801GB (ICH7/R) Rev A1
  Memory type DDR2
  Memory size 3072 MB
  Double channels
  Frequency memory 266,3 MHz (3:4)
  Latency CASE # (CL) 4.0
  # For CASE # delay (tRCD) RAS 4
  RAS # Precharge (tRP) 4
  Cycle Time (tRAS) 12
  (TRC) Bank Cycle time 16
  Base address e/s MCHBAR 0x0FEDA0000
  E/s MCHBAR size 4096

  Memory SPD
  -------------------------------------------------------------------------

  DIMM # 1
  SMBus address 0 x 50
  Memory type DDR2
  Regular UDIMM module format
  MOSEL manufacturer (ID) (4000000000000000)
  Size 512 MB
  Band bandwidth PC2-4300 (266 MHz) max
  V916764K24QAFW-E4 part number
  Serial number 1153079D
  The year of manufacture date week/31/06
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 3.0 - 3-3-8-11 to 200 MHz
  JEDEC #2 4.0 - 4-4-11-15 at 266 MHz
  JEDEC #3 5.0 - 4-4-11-15 at 266 MHz

  DIMM # 2
  SMBus address 0 x 51
  Memory type DDR2
  Regular UDIMM module format
  Manufacturer (ID) PNY Electronics (7FBA000000000000)
  Size 1024 MB
  Bandwidth Max PC2-6400 (400 MHz)
  Part number
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 4.0 - 4-4-12-16 at 266 MHz
  JEDEC #2 20 5.0 - 5-5-15 @ 333 MHz
  JEDEC #3 6.0 - 6-6-18-24 @ 400 MHz

  DIMM # 3
  SMBus address 0 x 52
  Memory type DDR2
  Regular UDIMM module format
  MOSEL manufacturer (ID) (4000000000000000)
  Size 512 MB
  Band bandwidth PC2-4300 (266 MHz) max
  V916764K24QAFW-E4 part number
  Serial number 5954079C
  The year of manufacture date week/31/06
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 3.0 - 3-3-8-11 to 200 MHz
  JEDEC #2 4.0 - 4-4-11-15 at 266 MHz
  JEDEC #3 5.0 - 4-4-11-15 at 266 MHz

  DIMM # 4
  SMBus address 0 x 53
  Memory type DDR2
  Regular UDIMM module format
  Manufacturer (ID) PNY Electronics (7FBA000000000000)
  Size 1024 MB
  Bandwidth Max PC2-6400 (400 MHz)
  Part number
  Number of banks 1
  64-bit data width
  Correction no
  Nominal voltage 1.80 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 4.0 - 4-4-12-16 at 266 MHz
  JEDEC #2 20 5.0 - 5-5-15 @ 333 MHz
  JEDEC #3 6.0 - 6-6-18-24 @ 400 MHz

  Mike 5150

  Next post should help,

  http://en.community.Dell.com/support-forums/desktop/f/3514/p/19436963/20053889.aspx#20053889

  Before installing the processor, verify that the version of the BIOS A05 or higner is installed, when support for the latest processors has been added.

  Bev.

• Dell Dimension 8200 Memory Upgrade after upgrade the processor

  Hello

  I have a Dell Dimension 8200 (shipping date is 01/05/2002) which came with a FSB of 400. I've recently updated the its origianl 1.8 GHz a 2.4 GHz processor.  I understand that the 8200 with a FSB of 400 can use 800-40ns or 800-45ns memory sticks (I think that mine came with 800-45).  I intend to upgrade memory 1 GB to 4 X 512 (2GB), I installed (4 X 256).  My question is when I went to buy the 4 X 512 memory, said the pub, it could be used in a 8200 with a 2.1 GHz CPU or less.  I have a 2.4 GHz chip. Is that going to be a problem?

  Rbatleman,

  Great question!  When the Dimension 8200 was released the processor speed max was 2.1 ghz (probably why the memory you were viewing had this label).   We have updated later to the processor 2.4 ghz when it was available.  The two units came with the PC800-45 (400 mhz) memory, you should run into any problems with this memory.  Keep in mind the system supports only the RIMM modules that contain devices memory of 4, 8 or 16.  I hope this helps!

  -Andrew

• Dell Dimension 9200. The orange light flashes. Power disconnect day + this market but stop and it will not work unless that unplugged for a day

  Flashes orange and no lights on the front panel next to the USB ports. (see amber light on motherboard, power button / stop 15 sec + he disappears, but the computer does not start, a few times the fan turned on couple seconds), initially it used to go in the cycle (starts for about 3-5 seconds and stops) several times and the flashing yellow light.

  If I unplug the power cord for a day + and try, it worked, stop and restart immediately worked too but when I shutdown and come after a few hours, it will not start again (power plugged).
  Disconnect the power supply for a day + new and it worked once tried.

  I did the reset by pressing the power button / 15 sec + but no luck. Until a day + unplugged worked so far about three times will try again tomorrow and see what happens if I don't stop the computer ever.

  What a PSU or of the motherboard problem or some other problem? Hope it can be fixed.

  Rav96

  Flashes orange and no lights on the front panel next to the USB ports. (see amber light on motherboard, power button / stop 15 sec + he disappears, but the computer does not start, a few times the fan turned on couple seconds), initially it used to go in the cycle (starts for about 3-5 seconds and stops) several times and the flashing yellow light.

  If I unplug the power cord for a day + and try, it worked, stop and restart immediately worked too but when I shutdown and come after a few hours, it will not start again (power plugged).
  Disconnect the power supply for a day + new and it worked once tried.

  I did the reset by pressing the power button / 15 sec + but no luck. Until a day + unplugged worked so far about three times will try again tomorrow and see what happens if I don't stop the computer ever.

  What a PSU or of the motherboard problem or some other problem? Hope it can be fixed.

  Rav96

  A flashing orange power LED, usually indicates a power supply problem power, given the age of the Dimension 9200, which is highly likely.

  Try to replace the power supply with a power supply of labour "Known", to see if that makes a difference.

  This system does not use an exclusive power of Dell, you can install most power supply ATX with a power connector 24 pin or 20 + 4 pin main motherboard and this can be purchased in most local computer stores, or online.

  The 9200 has a rear panel open, a diet with or without the on/off switch can be installed.

  Note: You need a PSU with six SATA power connectors.

  Otherwise, you can buy a refurbished Dell OEM [Dell P/N KH624] 375w PSU from here:

  http://www.Amazon.com/Dell-dimension-power-supply-KH624/DP/B0039OHV2O

  Bev.

• To clean or not to clean. Dell Dimension 9200 Quad Core

  I use two very old Dimension 9200 Quad Core computers that perform very well indeed and all I want to do.

  I was considering to remove the radiator and the fan to clean any dust and dirt on but don't know if it of a good idea or not. I am aware that if I do that I'll have to remove the old thermal paste and replace it.

  I take an unnecessary risk in doing this, and it is maybe just better left alone?

  If I do what is best to use to remove the former compound and is there a particular type of thermal paste, I have to present a new request?

  With computers that work OK, the best choice is to leave it alone. Look inside to see if any animal hair, dust or dirt accumulated. Clean carefully and leave the single cpu.

• Dell Dimension 2400 RAM upgrade

  I've recently updated my memory on my Dell Dimension 2400 512 MB to 2 GB (entirely new memory sticks) and when I try to start my computer I get a series of loud beeps and no video input. I tried the stick at a time and I re installed to ensure that them have been installed correctly. Any advice would be greatly appreciated.

  System specs

  processor Pentium 4 2.5 ghz

  512 MB nVidia gt610 graphic

  512 MB of RAM

  Hi orcacros,

  Welcome to the community.

  Please let me know the specification of the new memory sticks. If you bought this online store, please give the link.

  It's starting with the old memory stick?

  If it is booting with the old memory stick, please update the BIOS by clicking on the link below:

  http://Dell.to/XBFOGw

  Dell Dimension 2400 will take care of the modules of memory 266 MHz or 333 MHz. Modules of DDR 200 MHz speed are not supported.

  Thank you & best regards
  Mustapha S
  #iworkfordell

• Dell dimension e520 Motherboard upgrade

  Hi, I have a Dell Dimension E520 and I was wondering if it takes care of all new mothers of dell. Thanks for your help.

  hunterp15

  There is no motherboards, other than a Dell e520 OEM motherboard that will fit the owner e520 EOL BTX chassis, or y at - it available BTX retail motherboards.

  The Dimension e520 is the latest model of this series, Dell made.

  Only 65 processors with 800 or 1066fsb will work with the E-520.

  The Q6700 should work, but before installing the processor, make sure you have BIOS version 2.2.1 [or more] installed, when additional CPU support has been added.
     
  Bev.

• Dell dimension e510 CPU upgrade

  Almost 2 years ago, I bought a dell dimension e510 with the pentium d 820 installed processor desktop computer but now I want to put the best processor in it it may take. I did some research and discovered it might support only the pentium d, pentium 4 hyperthreading w and that the pentium d 960 was supposed to be the best pentium d processor available. I bought a

  now heres where the problem begins: I put it in (radiator and all), but when I plugged it in, the power of computers led turns orange and nothing happens; No start, display, diagnostic lights or a message saying incompatible processor. I put the back of 820 to and it worked fine but the same 960 post custom. I thought that maybe the processor could be bad, so I sent it back, but the seller (seller ebay w / 99% positive feedback) says that it worked fine when he tested and it sends to me.

  I would like to know if anyone knows why it might not work, I need a different version of the card mother e510, make, it would be inconsistent, or I need to do something special (like asking dell for permission?)

  According to everest, my motherboard is 0HJ054, a07 bios revision. any ideas?

  
  

• Dell dimension 9200 2 and lights 1-2-3 short beeps

  Hello

  I have a Dimension 9200 bought around 2008. About 3 weeks, I started having issues getting started, until the computer wouldn't start. Lights said a bad video card, so I took out the card nvidia 260 and put the original video card in and the computer worked OK with the original video card. After another week or two, would not start the computer. I bought a used motherboard and succeeded him. When I turned on the computer, I had 2 short beeps and 1-2-3 on on the Panel. The seller knew what was up, then I sent the motherboard back and got a replacement of the replacement card is in it, but it still gives me 2 short beeps and 1-2-3 is turned on. The power led is constantly Green

  While these beeps and lights mean together?

  Thank you.

  Frank

  Beep codes should be in groups of three, separated by a short break, for example, 1-pause-1-pause-1. So if you hear 2 beeps, who is not useful.

  Version of Windows?

  According to the Manual, G-G-G-(off) means "another failure", and:

  1. Ensure that all disk and CD/DVD cables are properly connected to the system board
  2. If there is an error message on your screen to identify a problem with a device (for example, floppy drive or hard drive), check the device to ensure that it works correctly
  3. If the operating system is trying to boot from a device (for example, floppy drive or hard drive), check the system configuration (see to make sure that the boot sequence is correct for the devices installed on your computer.

  While everything is done, and you are sure that everything is installed properly and cables connected properly, remove the battery from the motherboard and the power button press / hold for about 30 seconds before reinstalling the battery. Then see if it boots with only mouse, screen and keyboard connected.

  If still no go, you will have to strip to a minimum by removing all PCI cards, except known working video card all modules in memory except the one in slot 1, disconnect all drives except boot the disk hard, etc.. Do the "battery thing"and see if it boots now...»